|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] dracut
Hi all , When i attempt to create an new domain it'has shown this : [root@salvonetbook media]# xm create -c /etc/xen/xmexample1 Using config file "/etc/xen/xmexample1". Error: Unable to find number for device (/dev/dm-3) [root@salvonetbook media]# vi /etc/xen/xmexample1 [root@salvonetbook media]# cd / [root@salvonetbook /]# vi /etc/xen/xmexample1 [root@salvonetbook /]# xm destroy salvo1 [root@salvonetbook /]# xm create -c /etc/xen/xmexample1 Using config file "/etc/xen/xmexample1". Started domain salvo1 (id=23) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.4-2.fc17.i686.PAE (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Wed Sep 26 22:10:23 UTC 2012 [ 0.000000] Disabled fast string operations [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000025ffffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] e820: last_pfn = 0x26000 max_arch_pfn = 0x1000000 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x25ffffff] [ 0.000000] RAMDISK: [mem 0x01003000-0x03622fff] [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 608MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 26000000 [ 0.000000] low ram: 0 - 26000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x25ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x25ffffff] [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] e820: [mem 0x26000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.3 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @e532b000 s34176 r0 d23168 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 154320 [ 0.000000] Kernel command line: root=/dev/control ro ip=:127.0.255.255::::eth0:dhcp 4 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1245056 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 556172k/622592k available (5541k kernel code, 65972k reserved, 2677k data, 648k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xf5296000 - 0xf57ff000 (5540 kB) [ 0.000000] pkmap : 0xf4e00000 - 0xf5000000 (2048 kB) [ 0.000000] vmalloc : 0xe6800000 - 0xf4dfe000 ( 229 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe6000000 ( 608 MB) [ 0.000000] .init : 0xc0c07000 - 0xc0ca9000 ( 648 kB) [ 0.000000] .data : 0xc09695e9 - 0xc0c06c00 (2677 kB) [ 0.000000] .text : 0xc0400000 - 0xc09695e9 (5541 kB) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 1596.055 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.11 BogoMIPS (lpj=1596055) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] Mount-cache hash table entries: 512 [ 0.001157] Initializing cgroup subsys cpuacct [ 0.001201] Initializing cgroup subsys memory [ 0.001254] Initializing cgroup subsys devices [ 0.001283] Initializing cgroup subsys freezer [ 0.001309] Initializing cgroup subsys net_cls [ 0.001334] Initializing cgroup subsys blkio [ 0.001359] Initializing cgroup subsys perf_event [ 0.001524] Disabled fast string operations [ 0.001566] CPU: Physical Processor ID: 0 [ 0.001589] CPU: Processor Core ID: 0 [ 0.001763] SMP alternatives: switching to UP code [ 0.219913] Freeing SMP alternatives: 24k freed [ 0.219975] ftrace: allocating 22628 entries in 45 pages [ 0.241279] Performance Events: unsupported p6 CPU model 28 no PMU driver, software events only. [ 0.243276] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.243531] Brought up 1 CPUs [ 0.244315] devtmpfs: initialized [ 0.248773] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.248911] Grant tables using version 2 layout. [ 0.248971] Grant table initialized [ 0.267165] RTC time: 165:165:165, date: 165/165/65 [ 0.267339] NET: Registered protocol family 16 [ 0.271027] PCI: setting up Xen PCI frontend stub [ 0.276730] bio: create slab <bio-0> at 0 [ 0.277050] ACPI: Interpreter disabled. [ 0.280112] xen/balloon: Initialising balloon driver. [ 0.285088] xen-balloon: Initialising balloon driver. [ 0.286180] vgaarb: loaded [ 0.286527] SCSI subsystem initialized [ 0.286965] usbcore: registered new interface driver usbfs [ 0.287075] usbcore: registered new interface driver hub [ 0.287311] usbcore: registered new device driver usb [ 0.287735] PCI: System does not support PCI [ 0.287769] PCI: System does not support PCI [ 0.288136] NetLabel: Initializing [ 0.288169] NetLabel: domain hash size = 128 [ 0.288192] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.288251] NetLabel: unlabeled traffic allowed by default [ 0.288418] Switching to clocksource xen [ 0.325265] pnp: PnP ACPI: disabled [ 0.334547] NET: Registered protocol family 2 [ 0.334714] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.335356] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.336441] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.336969] TCP: Hash tables configured (established 131072 bind 65536) [ 0.337006] TCP: reno registered [ 0.337037] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.337175] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.337420] NET: Registered protocol family 1 [ 0.337611] Unpacking initramfs... [ 0.556003] Freeing initrd memory: 39040k freed [ 0.608670] platform rtc_cmos: >registered platform RTC device (no PNP device found) [ 0.609282] apm: BIOS not found. [ 0.610047] audit: initializing netlink socket (disabled) [ 0.610170] type=2000 audit(1350228863.413:1): initialized [ 0.665383] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.678651] VFS: Disk quotas dquot_6.5.2 [ 0.678871] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.682630] msgmni has been set to 1162 [ 0.686897] alg: No test for stdrng (krng) [ 0.686963] NET: Registered protocol family 38 [ 0.687260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.687542] io scheduler noop registered [ 0.687577] io scheduler deadline registered [ 0.687634] io scheduler cfq registered (default) [ 0.688239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.688381] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.688413] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.690984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.693339] Non-volatile memory driver v1.3 [ 0.693375] Linux agpgart interface v0.103 [ 0.697980] loop: module loaded [ 0.698533] Fixed MDIO Bus: probed [ 0.698833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.698940] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.699008] uhci_hcd: USB Universal Host Controller Interface driver [ 0.699348] usbcore: registered new interface driver usbserial [ 0.699424] usbcore: registered new interface driver usbserial_generic [ 0.699486] USB Serial support registered for generic [ 0.699513] usbserial: USB Serial Driver core [ 0.699651] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.700881] mousedev: PS/2 mouse device common for all mice [ 0.769807] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0 [ 0.770025] rtc_cmos: probe of rtc_cmos failed with error -38 [ 0.770363] device-mapper: uevent: version 1.0.3 [ 0.770724] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 0.770941] EFI Variables Facility v0.08 2004-May-17 [ 0.771680] usbcore: registered new interface driver usbhid [ 0.771721] usbhid: USB HID core driver [ 0.771816] drop_monitor: Initializing network drop monitor service [ 0.772205] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.772402] TCP: cubic registered [ 0.772431] Initializing XFRM netlink socket [ 0.772897] NET: Registered protocol family 10 [ 0.773682] mip6: Mobile IPv6 [ 0.773724] NET: Registered protocol family 17 [ 0.773804] Key type dns_resolver registered [ 0.773969] Using IPI No-Shortcut mode [ 0.774666] registered taskstats version 1 [ 0.774741] XENBUS: Device with no driver: device/vbd/2050 [ 0.774769] XENBUS: Device with no driver: device/vbd/2049 [ 0.775015] Magic number: 1:252:3141 [ 0.775207] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.775893] Freeing unused kernel memory: 648k freed [ 0.784804] Write protecting the kernel text: 5544k [ 0.787922] Write protecting the kernel read-only data: 2160k [ 1.258611] dracut: dracut-018-35.git20120510.fc17 [ 1.843042] udevd[102]: starting version 182 [ 2.277254] dracut: Starting plymouth daemon [ 3.260421] blkfront: xvda2: flush diskcache: enabled [ 3.304952] blkfront: xvda1: flush diskcache: enabled [ 27.878151] dracut Warning: Unable to process initqueue [ 27.893226] dracut Warning: /dev/control does not exist dracut Warning: /dev/control does not exist Dropping to debug shell. i've tried with /dev/sda2, which is the device on is installed LVM . I 've got in /dev/sda2 one logical volume group and three logical volumes lv_root , lv_home, lv_swap ,lv_vm1 . Latter it have got root filesystem inside . otherwise , unlike of the snapshot above , i 've putted into configfile root='/dev/sda2 ro' , but it 's the same . So , I 'have been thinking that the problem was in "unable to process initqueue ". Someone Know this problem. thanks. _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |