domid: 36
config qemu network with xen bridge for  tap36.0 Management
qemu: ignoring not-understood drive `xvda'
Using file /dev/vg_etva_local/elastix22_root in read-write mode
Watching /local/domain/0/device-model/36/logdirty/cmd
Watching /local/domain/0/device-model/36/command
Watching /local/domain/36/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 40c92d5b-d381-49da-f4e4-5259c7d93f69
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/36/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/40c92d5b-d381-49da-f4e4-5259c7d93f69/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
char device redirected to /dev/pts/2
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xs_read(/local/domain/36/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/36/log-throttling'
medium change watch on `/local/domain/36/log-throttling' - unknown device, ignored
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
reset requested in cpu_handle_ioreq.
Issued domain 36 reboot