[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Problem with srptools



Hello,

The problem is solved.
The srptools are not working on the Xen Kernel when Intel Vt-D is enabled on the BIOS.

Matthieu

Le 18/12/12 13:24, Matthieu Lejeune a écrit :
Hello,

I have a problem with the srptools to connect my Dom0 to the scst over IB ressources.

When i'm on the Debian kernel (without Dom0)

root@blade1:/# ibsrpdm -c
id_ext=003048ffff9dd3b4,ioc_guid=003048ffff9dd3b4,dgid=fe80000000000000003048ffff9dd3b5,pkey=ffff,service_id=003048ffff9dd3b4
id_ext=003048ffff9dd3b4,ioc_guid=003048ffff9dd3b4,dgid=fe80000000000000003048ffff9dd3b6,pkey=ffff,service_id=003048ffff9dd3b4
root@blade1:/#

root@blade1:/# ibstat
CA 'mlx4_0'
    CA type: MT26418
    Number of ports: 1
    Firmware version: 2.9.1000
    Hardware version: a0
    Node GUID: 0x003048ffff9dd66c
    System image GUID: 0x003048ffff9dd66f
    Port 1:
        State: Active
        Physical state: LinkUp
        Rate: 20
        Base lid: 23
        LMC: 0
        SM lid: 1
        Capability mask: 0x0251086a
        Port GUID: 0x003048ffff9dd66d
root@blade1:/#

This is the loaded modules :

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.

loop
mlx4_ib
ib_umad
ib_ipoib
ib_srp
root@blade1:/#


When I'm on the Xen kernel (with 4.0.1 en 4.1.3 version of Xen)

I have this problem on the log with "ib_umad" module

Dec 18 13:16:33 blade4 kernel: [  133.118783] user_mad: process ibsrpdm did not enable P_Key index support.
Dec 18 13:16:33 blade4 kernel: [  133.118787] user_mad:   Documentation/infiniband/user_mad.txt has info on the new ABI.

The command "ibsrpdm -c"  is not responding

And the status of the infiniband is :

root@blade4:~# ibstat
CA 'mlx4_0'
    CA type: MT26418
    Number of ports: 1
    Firmware version: 2.9.1000
    Hardware version: a0
    Node GUID: 0x003048ffff9dd514
    System image GUID: 0x003048ffff9dd517
    Port 1:
        State: Initializing
        Physical state: LinkUp
        Rate: 8
        Base lid: 0
        LMC: 0
        SM lid: 0
        Capability mask: 0x02510868
        Port GUID: 0x003048ffff9dd515
root@blade4:~#

I realy don't understand the problem.

Thank's for your help

Matthieu Lejeune



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.