ID 7 is a debian test vm I set up, I just reconfigured the networking on it and rebooted, now this one can ping dom0 static IP and receives a reply. No reply when I try and ping the other windows guest, also
get a reply when pinging the default gateway, all are on the same network.
root@test-pv:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:3e:14:d8:42
inet addr:195.2.139.213 Bcast:195.2.139.255 Mask:255.255.255.0
inet6 addr: fe80::216:3eff:fe14:d842/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:545 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29480 (28.7 KiB) TX bytes:3016 (2.9 KiB)
Interrupt:17
From:
Jan Hejl [mailto:jh@xxxxxxxxxx]
Sent: 20 May 2013 13:15
To: Simon Jones
Cc: xen-users@xxxxxxxxxxxxx
Subject: Re: [Xen-users] xenbr0 / domU static IPs
I suppose domU ID you described is 7, isn't it? Is the other domU - id 14 - able to reach the dom0 with ping?
Dne 20.5.2013 14:09, Simon Jones napsal(a):
Hi Jan,
Thanks – I should have included that but here you go;
bridge name bridge id STP enabled interfaces
xenbr0 8000.00e081465f38 no eth1
tap14.0
vif14.0
vif7.0
Hi Simon,
what does "brctl show" show? It should show xenbr0 and some vifX.Y (which is domU interface) device.
Jan
Dne 20.5.2013 13:36, Simon Jones napsal(a):
Hi, I have a new xen hosting platform. I have given the bridge a static IP which I can ping/ssh to etc, when I create a new vm all works well apart from the networking. If I give DomU a static IP I can’t ping out from the box, Dom0 can’t
ping the vm. I’m suspecting it just isn’t seeing the bridge but am unsure where to start looking. This is a very standard setup, 1 bridge: xenbr0
Here’s a config file for a windows guest but I get the same with windows or debian guests.
cat windows8.cfg
kernel = "/usr/lib/xen-4.0/boot/hvmloader"
builder='hvm'
memory = 4096
vcpus=1
name = "Windows8"
vif = ['bridge=xenbr0']
disk = ['phy:/dev/vg0/windows8,hda,w','file:/usr/src/windows8_x64.iso,hdc:cdrom,r']
acpi = 1
device_model = 'qemu-dm'
boot="d"
sdl=0
serial='pty'
vnc=1
vnclisten="0.0.0.0"
vncpasswd=""
usbdevice='tablet'
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users
