|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] DomU: piix:not 100% native mode: will probe irq later
hello again, I did the same the procedure with xen-4.2.2, the guest machine booted successfully. But I wana do it on xen-4.1.2 because virt-manager seems to work very well in this version and also is default ubuntu distribution support.============================= THIS MY GUEST CONFIGURATION: kernel = "hvmloader" builder='hvm' memory = 128 name = "hvmtest" acpi=1 apic=1 pae=1 vif = [ 'bridge=xenbr0, model=e1000' ] disk = [ 'file:/var/lib/libvirt/images/base_swart.hddimg,hda,w' ] device_model = 'qemu_dm' sdl=0 vnc=1 vncpasswd=0 stdvga=0 serial='pty' tsc_mode=0 ============================== # xm create -c test.cfg Using config file "./test.cfg". Started domain hvmtest (id=11) SYSLINUX 4.06 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al boot: Loading /vmlinuz........ Loading /initrd..........ready. root@ubuntu-3:/etc/xen# xm create -c test.cfg Using config file "./test.cfg". Error: Device 768 (vbd) could not be connected. File /var/lib/libvirt/images/base_swart.hddimg is loopback-mounted through /dev/loop1, which is mounted in the privileged domain, and so cannot be mounted by a guest. root@ubuntu-3:/etc/xen# xm create -c test.cfg Using config file "./test.cfg". Started domain hvmtest (id=13) SYSLINUX 4.06 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al boot: Loading /vmlinuz........ Loading /initrd..........ready. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.8.4-yocto-standard (swart@swart-2) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Fri May 31 20:43:39 CEST 2013 Command line: initrd=/initrd LABEL=boot root=/dev/ram0 console=tty1 console=ttyS0 BOOT_IMAGE=/vmlinuz e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000007ffffff] usable BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved NX (Execute Disable) protection: active SMBIOS 2.4 present. No AGP bridge found e820: last_pfn = 0x8000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [mem 0x000fbc70-0x000fbc7f] mapped at [ffff8800000fbc70] init_memory_mapping: [mem 0x00000000-0x07ffffff] RAMDISK: [mem 0x078db000-0x07ffefff] ACPI: RSDP 00000000000ea020 00024 (v02 Xen) ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000) ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000) ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528) ACPI: FACS 00000000fc003400 00040 ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000) Zone ranges: DMA [mem 0x00010000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00010000-0x0009dfff] node 0: [mem 0x00100000-0x07ffffff] ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) Using ACPI (MADT) for SMP configuration information smpboot: Allowing 15 CPUs, 14 hotplug CPUs e820: [mem 0x08000000-0xfbffffff] available for PCI devices setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:15 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880007600000 s79104 r8192 d23296 u131072 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32136 Kernel command line: initrd=/initrd LABEL=boot root=/dev/ram0 console=tty1 console=ttyS0 BOOT_IMAGE=/vmlinuz PID hash table entries: 512 (order: 0, 4096 bytes) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) __ex_table already sorted, skipping sort Checking aperture... No AGP bridge found Memory: 104436k/131072k available (8001k kernel code, 456k absent, 26180k reserved, 5040k data, 780k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=15. NR_IRQS:4352 nr_irqs:1208 16 Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS0] enabled allocated 524288 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Fast TSC calibration using PIT tsc: Detected 2893.800 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.60 BogoMIPS (lpj=2893800) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 1 ACPI: Core revision 20121018 ftrace: allocating 28415 entries in 111 pages Switched APIC routing to physical flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 smpboot: CPU0: Intel(R) Core(TM) i5-3470S CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09) Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. i really appreciate any support either to explain me what is going on or give me an indication to what I should do. Bear in mind, the same configuration has worked in xen-4.2.2 xend/xm toolstack. thank you so much, Best, //Nas On Thu, Jun 13, 2013 at 6:33 PM, nesredin mahmud <nasmitlinux@xxxxxxxxx> wrote:
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |