[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Dear Ren Yongjie and Xen Developers



> -----Original Message-----
> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> [mailto:singapore.mr.teo.en.ming@xxxxxxxxx]
> Sent: Wednesday, August 07, 2013 11:20 PM
> To: singapore.mr.teo.en.ming@xxxxxxxxx
> Cc: Ren, Yongjie; xen-users@xxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxx;
> Gustav Sorenson
> Subject: Re: Dear Ren Yongjie and Xen Developers
> 
> On 01/08/2013 22:39, Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> wrote:
> > On 01/08/2013 21:24, Ren, Yongjie wrote:
> >>> -----Original Message-----
> >>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> >>> [mailto:singapore.mr.teo.en.ming@xxxxxxxxx]
> >>> Sent: Thursday, August 01, 2013 7:03 PM
> >>> To: Ren, Yongjie
> >>> Cc: xen-users@xxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxx; Teo En Ming
> >>> (Zhang
> >>> Enming)
> >>> Subject: Re: Dear Ren Yongjie
> >>>
> >>> On 01/08/2013 15:28, Ren, Yongjie wrote:
> >>>>> -----Original Message-----
> >>>>> From: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
> >>>>> [mailto:singapore.mr.teo.en.ming@xxxxxxxxx]
> >>>>> Sent: Thursday, August 01, 2013 5:25 AM
> >>>>> To: Ren, Yongjie; xen-users@xxxxxxxxxxxxx;
> >>>>> xen-devel@xxxxxxxxxxxxx; Teo
> >>> En
> >>>>> Ming (Zhang Enming)
> >>>>> Subject: Dear Ren Yongjie
> >>>>>
> >>>>> Hi Yongjie,
> >>>>>
> >>>>> I have just compiled and installed Xen 4.3-unstable changeset 26666
> >>> and
> >>>>> Linux kernel 3.8.1, according to your specifications. However, I
> >>>>> still
> >>>>> cannot get success with Intel HD Graphics 4600 IGD VGA
> passthrough.
> >>>>>
> >>>>> Although in Device Manager in Windows 7 HVM domU, it says "This
> >>> device
> >>>>> is working properly" for Intel HD Graphics 4600, I can only get 16
> >>>>> colors. Please refer to the following screenshots.
> >>>>>
> >>>>> http://i.imgur.com/zaEGys4.jpg
> >>>>>
> >>>>> http://i.imgur.com/KRZzxNZ.jpg
> >>>>>
> >>>>> http://i.imgur.com/aVyuh4W.jpg
> >>>>>
> >>>>> I have attached the relevant configuration files in this email.
> >>>>> Please
> >>>>> check to see if there are any mistakes.
> >>>>>
> >>>>> Output of sudo xl dmesg: http://pastebin.com/knN7Hdg6
> >>>>>
> >>>>> Output of dmesg: http://pastebin.com/ixPuUnni
> >>>>>
> >>>>> Output of sudo xl info: http://pastebin.com/JRuqi3ay
> >>>>>
> >>>>> Output of sudo lspci -vvv: http://pastebin.com/YnL0zSBW
> >>>>>
> >>>>> Please advise. I really hope to be able to make Intel HD Graphics
> >>>>> 4600
> >>>>> IGD VGA passthrough work successfully.
> >>>>>
> >>>> Hi Enming,
> >>>> I can't reproduce your issue even if I use your Dom0 and guest config.
> >>>> So, can you can try the following two:
> >>>> 1. use upstream Xen/Dom0 to try since that also works for me.
> >>> Dear Yongjie,
> >>>
> >>> What do you mean by upstream Xen/Dom0? I don't understand.
> >>>
> >> I mean using latest Xen and Dom0 is also fine for VGA passthru.
> >> No need to use specific changeset of Xen.
> >>
> >>>> 2. try other HSW CPU (e.g. Core i5-4670 which works for me)
> >>> I am sorry but it is out of budget for me. I can't buy another cpu to
> >>> test vga passthrough.
> >>>> Best Regards,
> >>>>        Yongjie (Jay)
> >>>>
> >>> By the way, what distro and version are you using for your dom0? Is it
> >>> Ubuntu, Debian, Mint or Fedora?
> >>>
> >> I'm using RHEL6.4. I think it doesn't matter.
> >>
> >> Best Regards,
> >>       Yongjie (Jay)
> >>
> >
> > Dear Yongjie and Xen developers,
> >
> > I have compiled and installed the latest Xen 4.4-unstable changeset
> > 27305 and Linux kernel 3.10.3.
> >
> > Although I did not get error code 43 for Intel HD Graphics 4600 IGD in
> > device manager, I am still getting 16 colors only for the monitor!!!
> >
> > How can I solve this problem?
> >
> 
> Hi Yongjie,
> 
> I have installed Fedora 19 x86_64 as a dom0 and compiled and installed
> Xen 4.4-unstable changeset 27305 and Linux kernel 3.10.5. Previously I
> was using Ubuntu 12.04.2 LTS as dom0.
> 
> Although I did not get error code 43 for Intel HD Graphics 4600 in
> device manager, I am still getting only 16 colors on the display. I
> really do not know where the problem lies. Device manager says "This
> device is working properly.", yet I am still getting only 16 colors on
> the display.
> 
> Could you share with me your /etc/grub.d/40_custom GRUB2 contents?
> 
I'm sorry but I didn't use GRUB2. 
I'm using RHEL6.4 as the OS and compiled the latest Xen and Dom0 kernel.
the grub entry is something like below:
title xen-32e
        root (hd0,0)
        kernel (hd0,0)/boot/xen.gz dom0_mem=1024M iommu=1 loglvl=all 
guest_loglvl=all console=com1,115200,8n1 conring_size=32M 3
        module (hd0,0)/boot/vmlinuz-xen ro 
root=UUID=6b431eba-2c2b-4621-a4e3-6f8a991f1b70 console=hvc0 3
        module (hd0,0)/boot/initrd-xen.img

--
  Jay

> Thank you very much.
> 
> --
> Yours sincerely,
> 
> Singapore Citizen Mr. Teo En Ming (Zhang Enming)


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.