I can not connect via windows
server XEN.
# -*- sh -*-
#
# Xend configuration file.
#
# This example configuration is
appropriate for an installation that
# utilizes a bridged network
configuration. Access to xend via http
# is disabled.
# Commented out entries show the
default for that entry, unless
otherwise
# specified.
#(logfile /var/log/xend.log)
#(loglevel DEBUG)
#(xend-http-server no)
(xend-unix-server yes)
#(xend-tcp-xmlrpc-server no)
#(xend-unix-xmlrpc-server yes)
#(xend-relocation-server no)
(xend-relocation-server yes)
#(xend-unix-path
/var/lib/xend/xend-socket)
# Port xend should use for the HTTP
interface, if xend-http-server is set.
#(xend-port 8000)
# Port xend should use for the
relocation interface, if
xend-relocation-server
# is set.
#(xend-relocation-port 8002)
# Address xend should listen on for
HTTP connections, if xend-http-server
is
# set.
# Specifying 'localhost' prevents
remote connections.
# Specifying the empty string ''
(the default) allows all connections.
#(xend-address '')
#(xend-address localhost)
# Address xend should listen on for
relocation-socket connections, if
# xend-relocation-server is set.
# Meaning and default as for
xend-address above.
#(xend-relocation-address '')
# The hosts allowed to talk to the
relocation port. If this is empty
(the
# default), then all connections
are allowed (assuming that the
connection
# arrives on a port and interface
on which we are listening; see
# xend-relocation-port and
xend-relocation-address above).
Otherwise, this
# should be a space-separated
sequence of regular expressions. Any
host with
# a fully-qualified domain name or
an IP address that matches one of
these
# regular expressions will be
accepted.
#
# For example:
# (xend-relocation-hosts-allow
'^localhost$ ^.*\.example\.org$')
#
#(xend-relocation-hosts-allow '')
(xend-relocation-hosts-allow '')
# The limit (in kilobytes) on the
size of the console buffer
#(console-limit 1024)
##
# To bridge network traffic, like
this:
#
# dom0: fake eth0 -> vif0.0 -+
# |
# bridge
-> real eth0 -> the network
# |
# domU: fake eth0 -> vifN.0 -+
#
# use
#
#(network-script network-bridge)
#
# Your default ethernet device is
used as the outgoing interface, by
default.
# To use a different one (e.g.
eth1) use
#
#(network-script 'network-bridge
netdev=eth0')
#
# The bridge is named xenbr0, by
default. To rename the bridge, use
#
(network-script 'network-bridge
bridge=br-xen0')
#
# It is possible to use the
network-bridge script in more
complicated
# scenarios, such as having two
outgoing interfaces, with two bridges,
and
# two fake interfaces per guest
domain. To do things like this, write
# yourself a wrapper script, and
call network-bridge from it, as
appropriate.
#
(network-script network-bridge)
# The script used to control
virtual interfaces. This can be
overridden on a
# per-vif basis when creating a
domain or a configuring a new vif.
The
# vif-bridge script is designed for
use with the network-bridge script, or
# similar configurations.
#
# If you have overridden the bridge
name using
# (network-script 'network-bridge
bridge=<name>') then you may
wish to do the
# same here. The bridge name can
also be set when creating a domain or
# configuring a new vif, but a
value specified here would act as a
default.
#
# If you are using only one bridge,
the vif-bridge script will discover
that,
# so there is no need to specify it
explicitly.
#
(vif-script vif-bridge)
## Use the following if network
traffic is routed, as an alternative
to the
# settings for bridged networking
given above.
#(network-script network-route)
#(vif-script vif-route)
## Use the following if network
traffic is routed with NAT, as an
alternative
# to the settings for bridged
networking given above.
#(network-script network-nat)
#(vif-script vif-nat)
# Dom0 will balloon out when needed
to free memory for domU.
# dom0-min-mem is the lowest memory
level (in MB) dom0 will get down to.
# If dom0-min-mem=0, dom0 will
never balloon out.
(dom0-min-mem 196)
# In SMP system, dom0 will use
dom0-cpus # of CPUS
# If dom0-cpus = 0, dom0 will take
all cpus available
(dom0-cpus 0)
# Whether to enable core-dumps when
domains crash.
#(enable-dump no)
