Re: [Xen-users] network not work

[Ian Campbell <Ian.Campbell@xxxxxxxxxx>]

On Fri, 2013-11-01 at 10:26 +0000, Cesar A. wrote:
> When I add all interfaces, the internet does not work....

http://wiki.xen.org/wiki/Network_Configuration_Examples_%28Xen_4.1%2B%29
contains examples of how to do this correctly.

> eth0 = internet
> eth1 = lan

Are you intending for these to be bridged via xenbr0 and xenbr1 or are
those bridges intended to be internal only?

Assuming the former then you want to drop the eth0/eth1 stanzas from
your configuration and add the necessary directives (see the link above)
to add the physical NICs as ports to the bridge. Depending on your
environment you may also want to use e.g. the eth0 IP settings on
xenbr0. It doesn't make sense to have eth0 bridged to xenbr0 with both
having IP settings, your settings need to be on the bridge not the
enslaved NIC.

HTH
Ian.




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users