Re: [Xen-users] xen-vnif.ko missing

[Jaya Dhanesh <jaya.dhanesh@xxxxxxxxxxxx>]

I do not see any xvda in the console log.

plfm-app-sim-03:~/vmmgr/hvmmgr/.hvmmgrd/vms # xm create ttool2.cfg
Using config file "./ttool2.cfg".
Started domain ttool2 (id=288)
plfm-app-sim-03:~/vmmgr/hvmmgr/.hvmmgrd/vms # xm console ttool2
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.13-0.27-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b)
[    0.000000] Command line: root=/dev/hda2 console=ttyS0,115200 resume=/dev/hda1 splash=silent crashkernel=256M-:128M showopts
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000f0000000 (usable)
[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xf0000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fbc90] fbc90
[    0.000000] init_memory_mapping: 0000000000000000-00000000f0000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000110000000
[    0.000000] RAMDISK: 37925000 - 37ff0000
[    0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 4352MB)
[    0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
[    0.000000] ACPI: XSDT 00000000fc00eaa0 00034 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: FACP 00000000fc00e8c0 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: DSDT 00000000fc002c40 0BBF1 (v02    Xen      HVM 00000000 INTL 20081031)
[    0.000000] ACPI: FACS 00000000fc002c00 00040
[    0.000000] ACPI: APIC 00000000fc00e9c0 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000110000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000110000000
[    0.000000]   NODE_DATA [000000010ffd9000 - 000000010fffffff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00110000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000f0000
[    0.000000]     0: 0x00100000 -> 0x00110000
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:c000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88010fc00000 s74880 r8192 d23424 u131072
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1033225
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/hda2 console=ttyS0,115200 resume=/dev/hda1 splash=silent crashkernel=256M-:128M showopts
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 3912040k/4456448k available (4405k kernel code, 262600k absent, 281808k reserved, 7781k data, 1356k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:262400 nr_irqs:1208 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2400.567 MHz processor.
[    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.13 BogoMIPS (lpj=9602268)
[    0.021896] pid_max: default: 32768 minimum: 301
[    0.024201] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[22]: defcmd archkdbcommon "" "Common arch debugging"
[    0.044157] Security Framework initialized
[    0.048020] AppArmor: AppArmor initialized
[    0.052309] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.056799] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.060354] Mount-cache hash table entries: 256
[    0.064132] Initializing cgroup subsys cpuacct
[    0.068009] Initializing cgroup subsys memory
[    0.072021] Initializing cgroup subsys devices
[    0.074990] Initializing cgroup subsys freezer
[    0.076007] Initializing cgroup subsys net_cls
[    0.080006] Initializing cgroup subsys blkio
[    0.084011] Initializing cgroup subsys perf_event
[    0.087217] CPU: Physical Processor ID: 0
[    0.088007] CPU: Processor Core ID: 0
[    0.092008] mce: CPU supports 9 MCE banks
[    0.098189] ACPI: Core revision 20110413
[    0.106673] Enabling x2apic
[    0.108005] Enabled x2apic
[    0.108009] Switched APIC routing to physical x2apic.
[    0.113724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.159472] CPU0: Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz stepping 02
[    0.168009] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[    0.168115] NMI watchdog disabled (cpu0): hardware events not enabled
[    0.172127] Booting Node   0, Processors  #1
[    0.208026] NMI watchdog disabled (cpu1): hardware events not enabled
[    0.212083] Brought up 2 CPUs
[    0.216015] Total of 2 processors activated (9602.26 BogoMIPS).
[    0.220389] devtmpfs: initialized
[    0.228993] print_constraints: dummy:
[    0.232050] Time:  9:26:29  Date: 11/08/13
[    0.236236] NET: Registered protocol family 16
[    0.240175] ACPI: bus type pci registered
[    0.244054] PCI: Using configuration type 1 for base access
[    0.248596] bio: create slab <bio-0> at 0
[    0.262531] ACPI: Interpreter enabled
[    0.264019] ACPI: (supports S0 S5)
[    0.268622] ACPI: Using IOAPIC for interrupt routing
[    0.335247] ACPI: No dock devices found.
[    0.336024] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.344111] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.352113] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.356025] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.364025] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.372025] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[    0.387626] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.387628] * this clock source is slow. Consider trying other clock sources
[    0.404902] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.439426]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.712599] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[    0.717484] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.721426] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.728913] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[    0.733597] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.740051] vgaarb: loaded
[    0.744181] PCI: Using ACPI for IRQ routing
[    0.748926] NetLabel: Initializing
[    0.752048] NetLabel:  domain hash size = 128
[    0.756047] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.760059] NetLabel:  unlabeled traffic allowed by default
[    0.769501] AppArmor: AppArmor Filesystem Enabled
[    0.772066] pnp: PnP ACPI init
[    0.776059] ACPI: bus type pnp registered
[    0.780103] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.788221] system 00:02: [io  0x10c0-0x1141] has been reserved
[    0.792052] system 00:02: [io  0xb044-0xb047] has been reserved
[    0.796167] system 00:03: [io  0x08a0-0x08a3] has been reserved
[    0.804053] system 00:03: [io  0x0cc0-0x0ccf] has been reserved
[    0.808052] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.837911] pnp: PnP ACPI: found 12 devices
[    0.840053] ACPI: ACPI bus type pnp unregistered
[    0.852470] Switching to clocksource acpi_pm
[    0.856287] NET: Registered protocol family 2
[    0.859241] Switched to NOHz mode on CPU #0
[    0.864241] Switched to NOHz mode on CPU #1
[    0.868136] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.875651] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.883577] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.889431] TCP: Hash tables configured (established 524288 bind 65536)
[    0.894811] TCP reno registered
[    0.897437] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.902349] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.907819] NET: Registered protocol family 1
[    0.911385] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.916285] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.921100] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.926530] Unpacking initramfs...
[    1.087804] Freeing initrd memory: 6956k freed
[    1.095232] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.103487] Placing 64MB software IO TLB between ffff8800ebffa000 - ffff8800efffa000
[    1.113632] software IO TLB at phys 0xebffa000 - 0xefffa000
[    1.121469] audit: initializing netlink socket (disabled)
[    1.128467] type=2000 audit(1383902790.128:1): initialized
[    1.166444] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.175658] VFS: Disk quotas dquot_6.5.2
[    1.180758] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.189100] msgmni has been set to 1913
[    1.194298] alg: No test for stdrng (krng)
[    1.199607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.209128] io scheduler noop registered
[    1.214150] io scheduler deadline registered
[    1.219691] io scheduler cfq registered (default)
[    1.226105] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.235613] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.285363] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.296315] Non-volatile memory driver v1.3
[    1.301750] Linux agpgart interface v0.103
[    1.307057] Fixed MDIO Bus: probed
[    1.311077] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.323945] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.330397] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.337314] mousedev: PS/2 mouse device common for all mice
[    1.345744] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.358284] cpuidle: using governor ladder
[    1.363613] cpuidle: using governor menu
[    1.368781] EFI Variables Facility v0.08 2004-May-17
[    1.375463] TCP cubic registered
[    1.379727] Registering the dns_resolver key type
[    1.386146] registered taskstats version 1
[    1.393051]   Magic number: 5:957:423
[    1.402070] Freeing unused kernel memory: 1356k freed
[    1.522730] SCSI subsystem initialized
[    1.554774] scsi0 : ata_piix
[    1.558904] scsi1 : ata_piix
[    1.562690] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14
[    1.571372] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15
[    1.741495] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[    1.745790] ata1.00: 16777216 sectors, multi 16: LBA48
[    1.751101] ata1.00: configured for MWDMA2
[    1.754127] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.10 PQ: 0 ANSI: 5
FATAL: Error inserting xen_vnif (/lib/modules/3.0.13-0.27-default/updates/netfront/xen-vnif.ko): No such device
[    1.792354] rdac: device handler registered
[    1.801072] hp_sw: device handler registered
[    1.809619] alua: device handler registered
[    1.818093] emc: device handler registered
Creating device nodes with udev
[    1.826564] udev: starting version 147
[    1.859781] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[    1.865438] sd 0:0:0:0: [sda] Write Protect is off
[    1.889443] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.899648]  sda: sda1 sda2
[    1.902157] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.093978] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
mount: devpts already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
[    2.164109] Refined TSC clocksource calibration: 2400.084 MHz.
[    2.169016] Switching to clocksource tsc
Boot logging started on /dev/ttyS0(/dev/console) at Fri Nov  8 04:26:31 2013
Trying manual resume from /dev/hda1
resume device /dev/hda1 not found (ignoring)
Trying manual resume from /dev/hda1
resume device /dev/hda1 not found (ignoring)
Waiting for device /dev/hda2 to appear: ..............................Could not find /dev/hda2.
Want me to fall back to /dev/hda2? (Y/n)

Thanks,
Dhanesh.

On 11/08/2013 04:33 PM, Wei Liu wrote:

On Fri, Nov 08, 2013 at 03:48:59PM +0530, Jaya Dhanesh wrote:

Hi,

I am trying tobring up a SLES SP2 as a VM on Xen 4.1.2. When I do a
console to the vm, I see the following logs:

FATAL: Error inserting xen_vnif
(/lib/modules/3.0.13-0.27-default/updates/netfront/xen-vnif.ko): No
such device
rying manual resume from /dev/hda1

resume device /dev/hda1 not found (ignoring)

Trying manual resume from /dev/hda1

resume device /dev/hda1 not found (ignoring)

Waiting for device /dev/hda2 to appear: [    1.876217] input:
ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input1

[    2.068106] Refined TSC clocksource calibration: 2400.083 MHz.

[    2.071086] Switching to clocksource tsc

..............................Could not find /dev/hda2.

Want me to fall back to /dev/hda2? (Y/n)

Any idea what the problem may be. The same thing works on another system.

Could you use xm create -c config and attach the full output here.

Do you see any thing like xvda* in log?

Wei.

Thanks,
Dhanesh.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users