Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.68-9.el6.centos.alt.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Nov 6 19:38:46 UTC 2013 Command line: ro root=/dev/mapper/vg_hv1-lv_root rd_LVM_LV=vg_hv1/lv_swap rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_hv1/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet Freeing 9f-100 pfn range: 97 pages freed 1-1 mapping on 9f->100 1-1 mapping on dfff0->100000 Released 97 pages of unused memory Set 131185 page(s) to 1-1 mapping Populating 40000-40061 pfn range: 97 pages added BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f000 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000040061000 (usable) Xen: 0000000040061000 - 00000000dfff0000 (unusable) Xen: 00000000dfff0000 - 00000000dfffe000 (ACPI data) Xen: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fee00000 - 00000000fef00000 (reserved) Xen: 00000000ff780000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 0000000720000000 (unusable) NX (Execute Disable) protection: active SMBIOS 2.4 present. DMI: Sun Microsystems Sun Fire X2200 M2/S39 , BIOS S39_3B13 12/13/2006 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x40061 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000ff780] ff780 initial memory mapped : 0 - 057b1000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-0000000040061000 0000000000 - 0040061000 page 4k kernel direct mapping tables up to 0x40060fff @ [mem 0x02919000-0x02b1cfff] xen: setting RW the range 2ae9000 - 2b1d000 RAMDISK: 02b1d000 - 057b1000 crashkernel: memory value expected ACPI: RSDP 00000000000fae30 00024 (v02 ACPIAM) ACPI: XSDT 00000000dfff0100 0004C (v01 A M I OEMXSDT 12000613 MSFT 00000097) ACPI: FACP 00000000dfff0290 000F4 (v03 A M I OEMFACP 12000613 MSFT 00000097) ACPI: DSDT 00000000dfff04a0 05EB0 (v01 S39_3 S39_3B13 00000B13 INTL 20051117) ACPI: FACS 00000000dfffe000 00040 ACPI: APIC 00000000dfff0390 00076 (v01 A M I OEMAPIC 12000613 MSFT 00000097) ACPI: SPCR 00000000dfff0410 00050 (v01 A M I OEMSPCR 12000613 MSFT 00000097) ACPI: OEMB 00000000dfffe040 00060 (v01 A M I AMI_OEM 12000613 MSFT 00000097) ACPI: SRAT 00000000dfff6350 00110 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 NUMA turned off Faking a node at 0000000000000000-0000000040061000 Initmem setup node 0 0000000000000000-0000000040061000 NODE_DATA [mem 0x4003b000-0x40060fff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00040061 On node 0 totalpages: 262128 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3922 pages, LIFO batch:0 DMA32 zone: 3530 pages used for memmap DMA32 zone: 254615 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 253, address 0xfec00000, GSI 0-253 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 270 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000) Booting paravirtualized kernel on Xen Xen version: 4.2.3-23.el6 (preserve-AD) setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff88003fe00000 s82432 r8192 d24064 u524288 pcpu-alloc: s82432 r8192 d24064 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 258537 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/vg_hv1-lv_root rd_LVM_LV=vg_hv1/lv_swap rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_hv1/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Placing 64MB software IO TLB between ffff88003a600000 - ffff88003e600000 software IO TLB at phys 0x3a600000 - 0x3e600000 Memory: 900308k/1048964k available (5660k kernel code, 452k absent, 148204k reserved, 5626k data, 1468k init) Hierarchical RCU implementation. NR_IRQS:262400 nr_irqs:256 16 xen: sci override: global_irq=9 trigger=0 polarity=0 xen: registering gsi 9 triggering 0 polarity 0 xen: --> pirq=9 -> irq=9 (gsi=9) xen: acpi sci 9 xen: --> pirq=0 -> irq=0 (gsi=0) xen: --> pirq=1 -> irq=1 (gsi=1) xen: --> pirq=2 -> irq=2 (gsi=2) xen: --> pirq=3 -> irq=3 (gsi=3) xen: --> pirq=4 -> irq=4 (gsi=4) xen: --> pirq=5 -> irq=5 (gsi=5) xen: --> pirq=6 -> irq=6 (gsi=6) xen: --> pirq=7 -> irq=7 (gsi=7) xen: --> pirq=8 -> irq=8 (gsi=8) xen: --> pirq=10 -> irq=10 (gsi=10) xen: --> pirq=11 -> irq=11 (gsi=11) xen: --> pirq=12 -> irq=12 (gsi=12) xen: --> pirq=13 -> irq=13 (gsi=13) xen: --> pirq=14 -> irq=14 (gsi=14) xen: --> pirq=15 -> irq=15 (gsi=15) Console: colour VGA+ 80x25 console [tty0] enabled allocated 4718592 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Xen: using vcpuop timer interface installing Xen timer for CPU 0 Detected 2814.420 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.84 BogoMIPS (lpj=2814420) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20120320 ftrace: allocating 22522 entries in 88 pages Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog: disabled (cpu0): hardware events not enabled Brought up 1 CPUs devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xdfffe000-0xdfffffff] (8192 bytes) Grant tables using version 2 layout. Grant table initialized dummy: NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] node 0 link 0: io port [2000, 3fff] TOM: 00000000e0000000 aka 3584M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, fe0bffff] TOM2: 0000000720000000 aka 29184M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xe0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x720000000-0xfcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xff77ffff] (ignored) PCI: root bus 00: hardware-probed resources PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x720000000-0xfcffffffff] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000 pci 0000:00:01.0: [10de:0364] type 00 class 0x060100 HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500 pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f] pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f] pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310 pci 0000:00:02.0: reg 10: [mem 0xfcffb000-0xfcffbfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320 pci 0000:00:02.1: reg 10: [mem 0xfcffac00-0xfcffacff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a pci 0000:00:04.0: reg 20: [io 0xffa0-0xffaf] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185 pci 0000:00:05.0: reg 10: [io 0xd480-0xd487] pci 0000:00:05.0: reg 14: [io 0xd400-0xd403] pci 0000:00:05.0: reg 18: [io 0xd080-0xd087] pci 0000:00:05.0: reg 1c: [io 0xd000-0xd003] pci 0000:00:05.0: reg 20: [io 0xcc00-0xcc0f] pci 0000:00:05.0: reg 24: [mem 0xfcff9000-0xfcff9fff] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401 pci 0000:00:08.0: [10de:0373] type 00 class 0x068000 pci 0000:00:08.0: reg 10: [mem 0xfcff8000-0xfcff8fff] pci 0000:00:08.0: reg 14: [io 0xc880-0xc887] pci 0000:00:08.0: reg 18: [mem 0xfcffa800-0xfcffa8ff] pci 0000:00:08.0: reg 1c: [mem 0xfcffa400-0xfcffa40f] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: [10de:0373] type 00 class 0x068000 pci 0000:00:09.0: reg 10: [mem 0xfcff7000-0xfcff7fff] pci 0000:00:09.0: reg 14: [io 0xc800-0xc807] pci 0000:00:09.0: reg 18: [mem 0xfcffa000-0xfcffa0ff] pci 0000:00:09.0: reg 1c: [mem 0xfcff6c00-0xfcff6c0f] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: [10de:0376] type 01 class 0x060400 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: [10de:0374] type 01 class 0x060400 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: [10de:0374] type 01 class 0x060400 pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400 pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1a03:2000] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xfd000000-0xfd7fffff] pci 0000:01:05.0: reg 14: [mem 0xfdee0000-0xfdefffff] pci 0000:01:05.0: reg 18: [io 0xec00-0xec7f] pci 0000:01:05.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfd000000-0xfdefffff] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:06.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:06.0: bridge window [mem 0x720000000-0xfcffffffff] (subtractive decode) pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: PCI bridge to [bus 04-04] pci 0000:05:00.0: [1166:0103] type 01 class 0x060400 pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0d.0: PCI bridge to [bus 05-06] pci 0000:00:0d.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:06:04.0: [14e4:1678] type 00 class 0x020000 pci 0000:06:04.0: reg 10: [mem 0xfdff0000-0xfdffffff 64bit] pci 0000:06:04.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit] pci 0000:06:04.0: PME# supported from D3hot D3cold pci 0000:06:04.1: [14e4:1678] type 00 class 0x020000 pci 0000:06:04.1: reg 10: [mem 0xfdfc0000-0xfdfcffff 64bit] pci 0000:06:04.1: reg 18: [mem 0xfdfb0000-0xfdfbffff 64bit] pci 0000:06:04.1: PME# supported from D3hot D3cold pci 0000:05:00.0: PCI bridge to [bus 06-06] pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:0f.0: PCI bridge to [bus 07-07] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12.BR1E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *15 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled. xen/balloon: Initialising balloon driver. xen-balloon: Initialising balloon driver. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f000 - 000000000009ffff reserve RAM buffer: 0000000040061000 - 0000000043ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xe0000000-0xff77ffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] xen: registering gsi 8 triggering 1 polarity 0 pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] xen: registering gsi 13 triggering 1 polarity 0 pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x03f8-0x03ff] xen: registering gsi 4 triggering 1 polarity 0 pnp 00:05: [irq 4] pnp 00:05: [dma 0 disabled] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:06: [io 0x02f8-0x02ff] xen: registering gsi 3 triggering 1 polarity 0 pnp 00:06: [irq 3] pnp 00:06: [dma 0 disabled] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:07: [mem 0x000d0000-0x000d3fff window] pnp 00:07: [mem 0x000d4000-0x000d7fff window] pnp 00:07: [mem 0x000de000-0x000dffff window] pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x0ca0-0x0cbf] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x0800-0x080f] pnp 00:07: [io 0x2000-0x207f] pnp 00:07: [io 0x2080-0x20ff] pnp 00:07: [io 0x2400-0x247f] pnp 00:07: [io 0x2480-0x24ff] pnp 00:07: [io 0x2800-0x287f] pnp 00:07: [io 0x2880-0x28ff] pnp 00:07: [io 0x2f00-0x2f7f] pnp 00:07: [io 0x2f80-0x2fff] pnp 00:07: [mem 0xfcf80000-0xfcfbffff] pnp 00:07: [mem 0xfee01000-0xfeefffff] system 00:07: [io 0x0ca0-0x0cbf] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x2000-0x207f] has been reserved system 00:07: [io 0x2080-0x20ff] has been reserved system 00:07: [io 0x2400-0x247f] has been reserved system 00:07: [io 0x2480-0x24ff] has been reserved system 00:07: [io 0x2800-0x287f] has been reserved system 00:07: [io 0x2880-0x28ff] has been reserved system 00:07: [io 0x2f00-0x2f7f] has been reserved system 00:07: [io 0x2f80-0x2fff] has been reserved system 00:07: [mem 0x000d0000-0x000d3fff window] could not be reserved system 00:07: [mem 0x000d4000-0x000d7fff window] could not be reserved system 00:07: [mem 0x000de000-0x000dffff window] could not be reserved system 00:07: [mem 0xfcf80000-0xfcfbffff] has been reserved system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfec00000-0xfec00fff] pnp 00:08: [mem 0xfee00000-0xfee00fff] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0060] pnp 00:09: [io 0x0064] xen: registering gsi 1 triggering 1 polarity 0 pnp 00:09: [irq 1] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0a: [io 0x0a00-0x0a0f] pnp 00:0a: [io 0x0a10-0x0a1f] system 00:0a: [io 0x0a00-0x0a0f] has been reserved system 00:0a: [io 0x0a10-0x0a1f] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xe0000000-0xefffffff] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x00000000-0x0009ffff] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:0c: [mem 0x000e0000-0x000fffff] pnp 00:0c: [mem 0x00100000-0xdfffffff] pnp 00:0c: [mem 0xff780000-0xffffffff] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved system 00:0c: [mem 0xff780000-0xffffffff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:00:06.0: PCI bridge to [bus 01-01] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfd000000-0xfdefffff] pci 0000:00:0a.0: PCI bridge to [bus 02-02] pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: PCI bridge to [bus 04-04] pci 0000:05:00.0: PCI bridge to [bus 06-06] pci 0000:05:00.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:0d.0: PCI bridge to [bus 05-06] pci 0000:00:0d.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:0f.0: PCI bridge to [bus 07-07] pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xe0000000-0xffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x720000000-0xfcffffffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfdefffff] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] pci_bus 0000:01: resource 5 [mem 0xe0000000-0xffffffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x720000000-0xfcffffffff] pci_bus 0000:05: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:06: resource 1 [mem 0xfdf00000-0xfdffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 xen: registering gsi 23 triggering 0 polarity 1 xen: --> pirq=23 -> irq=23 (gsi=23) ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 xen: registering gsi 22 triggering 0 polarity 1 xen: --> pirq=22 -> irq=22 (gsi=22) pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 45648k freed audit: initializing netlink socket (disabled) type=2000 audit(1384800417.113:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1847 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver xen: registering gsi 22 triggering 0 polarity 1 Already setup the GSI :22 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 22, io mem 0xfcffac00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.4.68-9.el6.centos.alt.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 23, io mem 0xfcffb000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 3.4.68-9.el6.centos.alt.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver libusual i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! rtc_cmos 00:02: setting system clock to 2013-11-18 18:46:57 UTC (1384800417) Initializing network drop monitor service Freeing unused kernel memory: 1468k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 464k freed Freeing unused kernel memory: 1420k freed dracut: dracut-004-303.el6 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx udev: starting version 147 udevd (73): /proc/73/oom_adj is deprecated, please use /proc/73/oom_score_adj instead. dracut: Starting plymouth daemon dracut: rd_NO_MD: removing MD RAID activation pata_amd 0000:00:04.0: version 0.4.1 pata_amd 0000:00:04.0: setting latency timer to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 usb 2-2: new low-speed USB device number 2 using ohci_hcd ata1.00: ATAPI: DV-28E-N, P.6A, max UDMA/33 ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TEAC DV-28E-N P.6A PQ: 0 ANSI: 5 ata2: port disabled--ignoring ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 xen: registering gsi 21 triggering 0 polarity 1 xen: --> pirq=21 -> irq=21 (gsi=21) pata_acpi 0000:00:05.0: setting latency timer to 64 sata_nv 0000:00:05.0: version 3.5 xen: registering gsi 21 triggering 0 polarity 1 Already setup the GSI :21 sata_nv 0000:00:05.0: Using SWNCQ mode sata_nv 0000:00:05.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21 ata4: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21 usb 2-2: New USB device found, idVendor=0b38, idProduct=0003 usb 2-2: New USB device strings: Mfr=4, Product=20, SerialNumber=68 usb 2-2: Product: USB MULTIMEDIA KEYBOARD usb 2-2: Manufacturer: Virtual usb 2-2: SerialNumber: 20050606 input: Virtual USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2 generic-usb 0003:0B38:0003.0001: input,hidraw0: USB HID v1.10 Keyboard [Virtual USB MULTIMEDIA KEYBOARD] on usb-0000:00:02.0-2/input0 input: Virtual USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3 generic-usb 0003:0B38:0003.0002: input,hidraw1: USB HID v1.10 Mouse [Virtual USB MULTIMEDIA KEYBOARD] on usb-0000:00:02.0-2/input1 usb 2-8: new low-speed USB device number 3 using ohci_hcd ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 usb 2-8: New USB device found, idVendor=413c, idProduct=2005 usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-8: Product: DELL USB Keyboard usb 2-8: Manufacturer: DELL input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 generic-usb 0003:413C:2005.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.0-8/input0 usb 2-9: new low-speed USB device number 4 using ohci_hcd ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: HPA detected: current 488390625, native 488397168 ata4.00: ATA-7: SEAGATE ST32500NSSUN250G 0719B3G6YA, 3.AZK, max UDMA/133 ata4.00: 488390625 sectors, multi 16: LBA48 NCQ (depth 31/32) usb 2-9: New USB device found, idVendor=046d, idProduct=c016 usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-9: Product: Optical USB Mouse usb 2-9: Manufacturer: Logitech input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input5 generic-usb 0003:046D:C016.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-9/input0 ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SEAGATE ST32500N n/a PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 488390625 512-byte logical blocks: (250 GB/232 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 3:0:0:0: [sdb] Attached SCSI disk sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk dracut: Scanning devices sda2 for LVM logical volumes vg_hv1/lv_swap vg_hv1/lv_root dracut: inactive '/dev/vg_hv1/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/vg_hv1/lv_home' [1.30 TiB] inherit dracut: inactive '/dev/vg_hv1/lv_swap' [13.77 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) dracut: Mounted root filesystem /dev/mapper/vg_hv1-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1384800420.371:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 i2c i2c-0: nForce2 SMBus adapter at 0x2d00 i2c i2c-1: nForce2 SMBus adapter at 0x2e00 nv_tco: NV TCO WatchDog Timer Driver v0.01 nv_tco: Watchdog reboot not detected nv_tco: initialized (0x2440). heartbeat=30 sec (nowayout=0) sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: Attached scsi generic sg2 type 0 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=20 (gsi=20) forcedeth 0000:00:08.0: setting latency timer to 64 forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 2, addr 00:1b:24:1d:ec:9e forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23 xen: registering gsi 23 triggering 0 polarity 1 Already setup the GSI :23 forcedeth 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 3, addr 00:1b:24:1d:ec:9f forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 MCE: In-kernel MCE decoding enabled. EDAC MC: Ver: 2.1.0 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC enabled. EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) EDAC amd64: DRAM ECC enabled. EDAC amd64: K8 revF or later detected (node 1). EDAC MC: DCT0 chip selects: EDAC amd64: MC: 0: 0MB 1: 0MB EDAC amd64: MC: 2: 0MB 3: 0MB EDAC amd64: MC: 4: 0MB 5: 0MB EDAC amd64: MC: 6: 4096MB 7: 0MB EDAC amd64: CS6: Registered DDR2 RAM EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.2 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 input: PC Speaker as /devices/platform/pcspkr/input/input6 microcode: AMD CPU family 0xf not supported powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2220 (1 cpu cores) (version 2.20.00) tg3.c:v3.123 (March 21, 2012) ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) tg3 0000:06:04.0: eth2: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:1b:24:1d:ec:9c tg3 0000:06:04.0: eth2: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:06:04.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:04.0: eth2: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 xen: registering gsi 18 triggering 0 polarity 1 xen: --> pirq=18 -> irq=18 (gsi=18) tg3 0000:06:04.1: eth3: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:1b:24:1d:ec:9d tg3 0000:06:04.1: eth3: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:06:04.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:06:04.1: eth3: dma_rwctrl[76148000] dma_mask[40-bit] Event-channel device installed. blktap_device_init: blktap device major 252 blktap_ring_init: blktap ring major: 250 EXT4-fs (dm-0): re-mounted. Opts: (null) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) Adding 14442492k swap on /dev/mapper/vg_hv1-lv_swap. Priority:-1 extents:1 across:14442492k Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) NET: Registered protocol family 10 iscsi: registered transport (iser) libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) iscsi: registered transport (cxgb3i) Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) iscsi: registered transport (cxgb4i) cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012) Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011) iscsi: registered transport (bnx2i) iscsi: registered transport (be2iscsi) ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7416 buckets, 29664 max) ip_tables: (C) 2000-2006 Netfilter Core Team Bridge firewalling registered forcedeth 0000:00:09.0: eth1: MSI enabled device eth1 entered promiscuous mode ADDRCONF(NETDEV_UP): eth2: link is not ready device eth2 entered promiscuous mode ADDRCONF(NETDEV_UP): eth3: link is not ready xenbr0: port 1(eth1) entered forwarding state xenbr0: port 1(eth1) entered forwarding state tg3 0000:06:04.1: eth3: Link is up at 1000 Mbps, full duplex tg3 0000:06:04.1: eth3: Flow control is off for TX and off for RX ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready tg3 0000:06:04.0: eth2: Link is up at 1000 Mbps, full duplex tg3 0000:06:04.0: eth2: Flow control is off for TX and off for RX ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready eth1: no IPv6 routers present xenbr0: no IPv6 routers present eth2: no IPv6 routers present eth3: no IPv6 routers present xenbr1: port 1(eth2) entered forwarding state xenbr1: port 1(eth2) entered forwarding state scsi4 : iSCSI Initiator over TCP/IP scsi5 : iSCSI Initiator over TCP/IP connection1:0: detected conn error (1020) scsi6 : iSCSI Initiator over TCP/IP connection2:0: detected conn error (1020) scsi7 : iSCSI Initiator over TCP/IP connection3:0: detected conn error (1020) scsi8 : iSCSI Initiator over TCP/IP connection4:0: detected conn error (1020) scsi9 : iSCSI Initiator over TCP/IP connection5:0: detected conn error (1020) scsi10 : iSCSI Initiator over TCP/IP connection6:0: detected conn error (1020) scsi11 : iSCSI Initiator over TCP/IP connection7:0: detected conn error (1020) scsi12 : iSCSI Initiator over TCP/IP connection8:0: detected conn error (1020) scsi13 : iSCSI Initiator over TCP/IP connection9:0: detected conn error (1020) scsi14 : iSCSI Initiator over TCP/IP connection10:0: detected conn error (1020) scsi15 : iSCSI Initiator over TCP/IP connection11:0: detected conn error (1020) scsi16 : iSCSI Initiator over TCP/IP connection12:0: detected conn error (1020) scsi17 : iSCSI Initiator over TCP/IP connection13:0: detected conn error (1020) connection14:0: detected conn error (1020) connection4:0: detected conn error (1020) scsi 4:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 4:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: [sdc] 104878080 512-byte logical blocks: (53.6 GB/50.0 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 91 00 00 00 sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 scsi 5:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdc] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg4 type 0 sd 5:0:0:0: [sdd] 83896320 512-byte logical blocks: (42.9 GB/40.0 GiB) sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 91 00 00 00 sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 6:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 6:0:0:0: [sde] 41963520 512-byte logical blocks: (21.4 GB/20.0 GiB) sd 6:0:0:0: Attached scsi generic sg5 type 0 sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 91 00 00 00 sdd: sdd1 sdd2 sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdd] Attached SCSI disk scsi 9:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 9:0:0:0: Attached scsi generic sg6 type 0 sd 9:0:0:0: [sdf] 209725440 512-byte logical blocks: (107 GB/100 GiB) sd 9:0:0:0: [sdf] Write Protect is off sd 9:0:0:0: [sdf] Mode Sense: 91 00 00 00 sd 9:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sd 6:0:0:0: [sde] Attached SCSI disk sdf: sdf1 sdf2 sd 9:0:0:0: [sdf] Attached SCSI disk scsi 8:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 8:0:0:0: Attached scsi generic sg7 type 0 sd 8:0:0:0: [sdg] 10506240 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 8:0:0:0: [sdg] Write Protect is off sd 8:0:0:0: [sdg] Mode Sense: 91 00 00 00 sd 8:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 11:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 11:0:0:0: Attached scsi generic sg8 type 0 sd 11:0:0:0: [sdh] 83896320 512-byte logical blocks: (42.9 GB/40.0 GiB) sd 11:0:0:0: [sdh] Write Protect is off sd 11:0:0:0: [sdh] Mode Sense: 91 00 00 00 sd 11:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sdg2 sd 8:0:0:0: [sdg] Attached SCSI disk sdh: sdh1 sdh2 sdh3 scsi 13:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 13:0:0:0: Attached scsi generic sg9 type 0 sd 13:0:0:0: [sdi] 524298240 512-byte logical blocks: (268 GB/250 GiB) sd 11:0:0:0: [sdh] Attached SCSI disk sd 13:0:0:0: [sdi] Write Protect is off sd 13:0:0:0: [sdi] Mode Sense: 91 00 00 00 sd 13:0:0:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 14:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 14:0:0:0: [sdj] 104878080 512-byte logical blocks: (53.6 GB/50.0 GiB) sd 14:0:0:0: Attached scsi generic sg10 type 0 sd 14:0:0:0: [sdj] Write Protect is off sd 14:0:0:0: [sdj] Mode Sense: 99 00 00 00 sd 14:0:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdi: sdi1 sdi2 sd 13:0:0:0: [sdi] Attached SCSI disk scsi 15:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 15:0:0:0: [sdk] 209725440 512-byte logical blocks: (107 GB/100 GiB) sd 15:0:0:0: Attached scsi generic sg11 type 0 sd 15:0:0:0: [sdk] Write Protect is off sd 15:0:0:0: [sdk] Mode Sense: 99 00 00 00 sd 15:0:0:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdj: sdj1 sdj2 sd 14:0:0:0: [sdj] Attached SCSI disk sdk: sdk1 sdk2 scsi 16:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 16:0:0:0: Attached scsi generic sg12 type 0 sd 16:0:0:0: [sdl] 524298240 512-byte logical blocks: (268 GB/250 GiB) sd 15:0:0:0: [sdk] Attached SCSI disk sd 16:0:0:0: [sdl] Write Protect is off sd 16:0:0:0: [sdl] Mode Sense: 91 00 00 00 sd 16:0:0:0: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdl: sdl1 sdl2 scsi 17:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 16:0:0:0: [sdl] Attached SCSI disk sd 17:0:0:0: Attached scsi generic sg13 type 0 sd 17:0:0:0: [sdm] 314572800 512-byte logical blocks: (161 GB/150 GiB) sd 17:0:0:0: [sdm] Write Protect is off sd 17:0:0:0: [sdm] Mode Sense: 91 00 00 00 sd 17:0:0:0: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 12:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 12:0:0:0: [sdn] 41963520 512-byte logical blocks: (21.4 GB/20.0 GiB) sd 12:0:0:0: Attached scsi generic sg14 type 0 sd 12:0:0:0: [sdn] Write Protect is off sd 12:0:0:0: [sdn] Mode Sense: 91 00 00 00 sd 12:0:0:0: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdm: sdm1 sdm2 sd 17:0:0:0: [sdm] Attached SCSI disk scsi 10:0:0:0: Direct-Access EQLOGIC 100E-00 5.0 PQ: 0 ANSI: 5 sd 10:0:0:0: Attached scsi generic sg15 type 0 sd 10:0:0:0: [sdo] 104878080 512-byte logical blocks: (53.6 GB/50.0 GiB) sd 10:0:0:0: [sdo] Write Protect is off sd 10:0:0:0: [sdo] Mode Sense: 91 00 00 00 sd 10:0:0:0: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdn: sdn1 sdn2 sd 12:0:0:0: [sdn] Attached SCSI disk sdo: sdo1 sdo2 sd 10:0:0:0: [sdo] Attached SCSI disk RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. xen-pciback: backend is vpci ADDRCONF(NETDEV_UP): virbr0: link is not ready xenbr1: no IPv6 routers present Ebtables v2.0 registered device vif1.0 entered promiscuous mode ADDRCONF(NETDEV_UP): vif1.0: link is not ready xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready virbr0: port 1(vif1.0) entered listening state virbr0: port 1(vif1.0) entered listening state virbr0: port 1(vif1.0) entered learning state virbr0: topology change detected, propagating virbr0: port 1(vif1.0) entered forwarding state ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready vif1.0: no IPv6 routers present