Send Xen-users mailing list submissions to
To subscribe or unsubscribe via the World Wide Web, visit
or, via email, send a message with subject or body 'help' to
You can reach the person managing the list at
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Xen-users digest..."
Today's Topics:
1. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
don't own device (Mike Neiderhauser)
2. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
don't own device (Mike Neiderhauser)
3. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
don't own device (Mike Neiderhauser)
4. Re: Requesting Help - Error: pci: PCI Backend and pci-stub
don't own device (Mike Neiderhauser)
----------------------------------------------------------------------
Message: 1
Date: Wed, 5 Feb 2014 08:09:12 -0500
Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
pci-stub don't own device
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
Sorry about dropping the CC. I will try not to do it again.
Which logs are you looking for?
I have already started installing Ubuntu on the machine so anything that
was from the 4.1 config has been deleted (I have a system image if I need
to restore it to get additional information).
Regards
You've dropped the list CC, please don't do that. I've put it back.
On Wed, 2014-02-05 at 07:45 -0500, Mike Neiderhauser wrote:
Looking at lshw on the machine shows that the device configuration
driver (after running the boot script) is pciback.
Anything in the logs?
On another note, do you have any suggests for getting started with Xen
4.3? I plan on using Ubuntu 13.10 as a base os and then installing on
there. Do I need to compile a custom kernel or anything?
I don't know much about Ubuntu, but in general it isn't necessary to
compile a custom kernel these days, unless you run into a bug which
requires patching etc.
Ian.
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Wed, 5 Feb 2014 08:43:48 -0500
Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
pci-stub don't own device
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
Do you have any suggestions for a setup guide for 4.3? I have installed
xen-hypervisor-4.3-amd64 from ubuntu package manger and I don't know where
to go from here.
Thanks
On Wed, 2014-02-05 at 08:09 -0500, Mike Neiderhauser wrote:
Which logs are you looking for?
"xm dmesg" (or xl dmesg) in addition to the dom0 kernel dmesg. From a
previous reply:
Does it say anything extra after you try the final create with
22
Invalid Argument as the result?
Also you should look in "xm dmesg" (Xen's console) as well as
"dmesg" (dom0's console)
I have already started installing Ubuntu on the machine so anything
that was from the 4.1 config has been deleted (I have a system image
if I need to restore it to get additional information).
It's OK, lets focus on the newer version.
Ian.
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Wed, 5 Feb 2014 08:54:18 -0500
Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
pci-stub don't own device
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
I have. But I cant seem to get the xm toolstack to switch with xl.
Regards
On Wed, 2014-02-05 at 08:43 -0500, Mike Neiderhauser wrote:
Do you have any suggestions for a setup guide for 4.3? I have
installed xen-hypervisor-4.3-amd64 from ubuntu package manger and I
don't know where to go from here.
Have you looked on the wiki?
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 4
Date: Wed, 5 Feb 2014 10:00:00 -0500
Subject: Re: [Xen-users] Requesting Help - Error: pci: PCI Backend and
pci-stub don't own device
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
Okay. I was able to switch over the toolstack to xl.
When trying to create the domu I get this:
root@fiat:~# xl create /etc/xen/ubuntu-hvm-0.cfg
Parsing config from /etc/xen/ubuntu-hvm-0.cfg
WARNING: ignoring "kernel" directive for HVM guest. Use "firmware_override"
instead if you really want a non-default firmware
WARNING: ignoring device_model directive.
WARNING: Use "device_model_override" instead if you really want a
non-default device_model
xc: info: VIRTUAL MEMORY ARRANGEMENT:
Loader: 0000000000100000->00000000001a69a4
Modules: 0000000000000000->0000000000000000
TOTAL: 0000000000000000->000000003f800000
ENTRY ADDRESS: 0000000000100608
xc: info: PHYSICAL MEMORY ALLOCATION:
4KB PAGES: 0x0000000000000200
2MB PAGES: 0x00000000000001fb
1GB PAGES: 0x0000000000000000
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't
support reset from sysfs for PCI device 0000:05:00.0
libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel doesn't
support reset from sysfs for PCI device 0000:05:00.1
Daemon running with PID 3095
xl dmesg
root@fiat:~# xl dmesg
(XEN) Xen version 4.3.0 (Ubuntu 4.3.0-1ubuntu1.2) (
debug=n Tue Dec 17 15:35:25 UTC 2013
(XEN) Bootloader: GRUB 2.00-19ubuntu2.1
(XEN) Command line: placeholder dom0_mem=1024M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e400 (usable)
(XEN) 000000000009e400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bdfb0000 (usable)
(XEN) 00000000bdfb0000 - 00000000bf3b0000 (reserved)
(XEN) 00000000bf3b0000 - 00000000bf5d7000 (usable)
(XEN) 00000000bf5d7000 - 00000000bf5d9000 (reserved)
(XEN) 00000000bf5d9000 - 00000000bf5ea000 (usable)
(XEN) 00000000bf5ea000 - 00000000bf5ee000 (reserved)
(XEN) 00000000bf5ee000 - 00000000bf5f0000 (usable)
(XEN) 00000000bf5f0000 - 00000000bf601000 (reserved)
(XEN) 00000000bf601000 - 00000000bf63f000 (usable)
(XEN) 00000000bf63f000 - 00000000bf6bf000 (reserved)
(XEN) 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
(XEN) 00000000bf7bf000 - 00000000bf7f0000 (ACPI data)
(XEN) 00000000bf7f0000 - 00000000bf800000 (usable)
(XEN) 00000000bf800000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000feb00000 - 00000000feb04000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed10000 - 00000000fed1a000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FE020, 0024 (r2 DELL )
(XEN) ACPI: XSDT BF7EF170, 00A4 (r1 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: FACP BF7EB000, 00F4 (r4 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: DSDT BF7E1000, 68FE (r1 DELL PE_SC3 0 DELL 40000)
(XEN) ACPI: FACS BF7B8000, 0040
(XEN) ACPI: SPMI BF7EE000, 0040 (r5 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: DMAR BF7ED000, 0078 (r1 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: ASF! BF7EC000, 00A5 (r32 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: HPET BF7EA000, 0038 (r1 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: APIC BF7E9000, 0092 (r2 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: MCFG BF7E8000, 003C (r1 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: BOOT BF7DE000, 0028 (r1 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: SSDT BF7DD000, 02F6 (r1 DELL PE_SC3 1000 DELL 40000)
(XEN) ACPI: ASPT BF7DA000, 0034 (r7 DELL PE_SC3 1 DELL 40000)
(XEN) ACPI: SSDT BF7D9000, 060E (r1 DELL PE_SC3 3000 DELL 40000)
(XEN) ACPI: SSDT BF7D8000, 0A92 (r1 DELL PE_SC3 3000 DELL 40000)
(XEN) ACPI: HEST BF7D7000, 00A8 (r1 DELL PE_SC3 0 DELL 40000)
(XEN) ACPI: ERST BF7D6000, 0230 (r1 DELL PE_SC3 0 DELL 40000)
(XEN) ACPI: BERT BF7D5000, 0030 (r1 DELL PE_SC3 0 DELL 40000)
(XEN) ACPI: EINJ BF7D4000, 0130 (r1 DELL PE_SC3 0 DELL 40000)
(XEN) System RAM: 4065MB (4163416kB)
(XEN) Domain heap initialised
(XEN) Processor #0 6:10 APIC version 21
(XEN) Processor #2 6:10 APIC version 21
(XEN) Processor #4 6:10 APIC version 21
(XEN) Processor #6 6:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D]dmar.c:583: RMRR address range not in reserved memory base =
0 end = fff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3093.056 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x23f3000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000134000000->0000000138000000 (233686 pages to
be allocated)
(XEN) Init. ramdisk: 000000013d0d6000->000000013ffff800
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff823f3000
(XEN) Init. ramdisk: ffffffff823f3000->ffffffff8531c800
(XEN) Phys-Mach map: ffffffff8531d000->ffffffff8551d000
(XEN) Start info: ffffffff8551d000->ffffffff8551d4b4
(XEN) Page tables: ffffffff8551e000->ffffffff8554d000
(XEN) Boot stack: ffffffff8554d000->ffffffff8554e000
(XEN) TOTAL: ffffffff80000000->ffffffff85800000
(XEN) ENTRY ADDRESS: ffffffff81d261e0
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .............................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
to Xen)
(XEN) Freed 260kB init memory.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
0x000000000004005f to 0x000000000004005d.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
0x000000000004005f to 0x000000000004005d.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
0x000000000004005f to 0x000000000004005d.
(XEN) traps.c:2503:d0 Domain attempted WRMSR 00000000000001fc from
0x000000000004005f to 0x000000000004005d.
dmesg
root@fiat:~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc
version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9
16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[ 0.000000] Command line: placeholder root=/dev/mapper/fiat--vg-root ro
biosdevname=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Freeing 9e-100 pfn range: 98 pages freed
[ 0.000000] 1-1 mapping on 9e->100
[ 0.000000] 1-1 mapping on bdfb0->bf3b0
[ 0.000000] 1-1 mapping on bf5d7->bf5d9
[ 0.000000] 1-1 mapping on bf5ea->bf5ee
[ 0.000000] 1-1 mapping on bf5f0->bf601
[ 0.000000] 1-1 mapping on bf63f->bf7f0
[ 0.000000] 1-1 mapping on bf800->100000
[ 0.000000] Released 98 pages of unused memory
[ 0.000000] Set 269866 page(s) to 1-1 mapping
[ 0.000000] Populating 40000-40062 pfn range: 98 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e400-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000bdfaffff] usable
[ 0.000000] Xen: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved
[ 0.000000] Xen: [mem 0x00000000bf3b0000-0x00000000bf5d6fff] usable
[ 0.000000] Xen: [mem 0x00000000bf5d7000-0x00000000bf5d8fff] reserved
[ 0.000000] Xen: [mem 0x00000000bf5d9000-0x00000000bf5e9fff] usable
[ 0.000000] Xen: [mem 0x00000000bf5ea000-0x00000000bf5edfff] reserved
[ 0.000000] Xen: [mem 0x00000000bf5ee000-0x00000000bf5effff] usable
[ 0.000000] Xen: [mem 0x00000000bf5f0000-0x00000000bf600fff] reserved
[ 0.000000] Xen: [mem 0x00000000bf601000-0x00000000bf63efff] usable
[ 0.000000] Xen: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[ 0.000000] Xen: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data
[ 0.000000] Xen: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable
[ 0.000000] Xen: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R210 II/03X6X0, BIOS 2.5.1
07/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x3fe00000-0x3fffffff]
[ 0.000000] [mem 0x3fe00000-0x3fffffff] page 4k
[ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3fdfffff]
[ 0.000000] [mem 0x3c000000-0x3fdfffff] page 4k
[ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[ 0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE
[ 0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
[ 0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE
[ 0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[ 0.000000] [mem 0x00100000-0x3bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40000000-0xbdfaffff]
[ 0.000000] [mem 0x40000000-0xbdfaffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf3b0000-0xbf5d6fff]
[ 0.000000] [mem 0xbf3b0000-0xbf5d6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf5d9000-0xbf5e9fff]
[ 0.000000] [mem 0xbf5d9000-0xbf5e9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf5ee000-0xbf5effff]
[ 0.000000] [mem 0xbf5ee000-0xbf5effff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf601000-0xbf63efff]
[ 0.000000] [mem 0xbf601000-0xbf63efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7f0000-0xbf7fffff]
[ 0.000000] [mem 0xbf7f0000-0xbf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x023f3000-0x0531cfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bf7ef170 000A4 (v01 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: FACP 00000000bf7eb000 000F4 (v04 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: DSDT 00000000bf7e1000 068FE (v01 DELL PE_SC3
00000000 DELL 00040000)
[ 0.000000] ACPI: FACS 00000000bf7b8000 00040
[ 0.000000] ACPI: SPMI 00000000bf7ee000 00040 (v05 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: XMAR 00000000bf7ed000 00078 (v01 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: ASF! 00000000bf7ec000 000A5 (v32 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: HPET 00000000bf7ea000 00038 (v01 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: APIC 00000000bf7e9000 00092 (v02 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: MCFG 00000000bf7e8000 0003C (v01 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: BOOT 00000000bf7de000 00028 (v01 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: SSDT 00000000bf7dd000 002F6 (v01 DELL PE_SC3
00001000 DELL 00040000)
[ 0.000000] ACPI: ASPT 00000000bf7da000 00034 (v07 DELL PE_SC3
00000001 DELL 00040000)
[ 0.000000] ACPI: SSDT 00000000bf7d9000 0060E (v01 DELL PE_SC3
00003000 DELL 00040000)
[ 0.000000] ACPI: SSDT 00000000bf7d8000 00A92 (v01 DELL PE_SC3
00003000 DELL 00040000)
[ 0.000000] ACPI: HEST 00000000bf7d7000 000A8 (v01 DELL PE_SC3
00000000 DELL 00040000)
[ 0.000000] ACPI: ERST 00000000bf7d6000 00230 (v01 DELL PE_SC3
00000000 DELL 00040000)
[ 0.000000] ACPI: BERT 00000000bf7d5000 00030 (v01 DELL PE_SC3
00000000 DELL 00040000)
[ 0.000000] ACPI: EINJ 00000000bf7d4000 00130 (v01 DELL PE_SC3
00000000 DELL 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x3f899000-0x3f89dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbdfaffff]
[ 0.000000] node 0: [mem 0xbf3b0000-0xbf5d6fff]
[ 0.000000] node 0: [mem 0xbf5d9000-0xbf5e9fff]
[ 0.000000] node 0: [mem 0xbf5ee000-0xbf5effff]
[ 0.000000] node 0: [mem 0xbf601000-0xbf63efff]
[ 0.000000] node 0: [mem 0xbf7f0000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1040853
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12105 pages used for memmap
[ 0.000000] DMA32 zone: 774712 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdfb0000-0xbf3affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5d7000-0xbf5d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5ea000-0xbf5edfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5f0000-0xbf600fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf63f000-0xbf6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.3.0 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003f200000 s86720 r8192
d23872 u262144
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 1.317175] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1024567
[ 1.317177] Policy zone: Normal
[ 1.317178] Kernel command line: placeholder
root=/dev/mapper/fiat--vg-root ro biosdevname=0
[ 1.317577] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.317607] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 1.337841] software IO TLB [mem 0x37000000-0x3b000000] (64MB) mapped at
[ffff880037000000-ffff88003affffff]
[ 1.343109] Memory: 840760K/4163412K available (7141K kernel code, 1082K
rwdata, 3260K rodata, 1364K init, 1420K bss, 3322652K reserved)
[ 1.343171] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 1.343187] Hierarchical RCU implementation.
[ 1.343188] RCU dyntick-idle grace-period acceleration is enabled.
[ 1.343189] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 1.343190] Offload RCU callbacks from all CPUs
[ 1.343193] Offload RCU callbacks from CPUs: 0-255.
[ 1.343200] NR_IRQS:16640 nr_irqs:712 16
[ 1.343257] xen: sci override: global_irq=9 trigger=0 polarity=0
[ 1.343258] xen: registering gsi 9 triggering 0 polarity 0
[ 1.343269] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 1.343288] xen: acpi sci 9
[ 1.343291] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 1.343293] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 1.343297] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 1.343300] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 1.343302] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 1.343304] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 1.343306] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 1.343309] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 1.343311] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 1.343313] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 1.343316] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 1.343318] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 1.343321] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 1.343323] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 1.347861] Console: colour VGA+ 80x25
[ 1.358167] console [tty0] enabled
[ 1.360299] allocated 16777216 bytes of page_cgroup
[ 1.360369] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 1.360487] Xen: using vcpuop timer interface
[ 1.360492] installing Xen timer for CPU 0
[ 1.360579] tsc: Detected 3093.056 MHz processor
[ 1.360646] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6186.11 BogoMIPS (lpj=12372224)
[ 1.360777] pid_max: default: 32768 minimum: 301
[ 1.360867] Security Framework initialized
[ 1.360946] AppArmor: AppArmor initialized
[ 1.361009] Yama: becoming mindful.
[ 1.361540] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 1.362357] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 1.362697] Mount-cache hash table entries: 256
[ 1.362932] Initializing cgroup subsys memory
[ 1.363003] Initializing cgroup subsys devices
[ 1.363068] Initializing cgroup subsys freezer
[ 1.363133] Initializing cgroup subsys blkio
[ 1.364545] Initializing cgroup subsys perf_event
[ 1.364610] Initializing cgroup subsys hugetlb
[ 1.364739] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 1.364739] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 1.364834] CPU: Physical Processor ID: 0
[ 1.364896] CPU: Processor Core ID: 0
[ 1.364960] mce: CPU supports 2 MCE banks
[ 1.365035] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 1.365035] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 1.365035] tlb_flushall_shift: 5
[ 1.365227] Freeing SMP alternatives memory: 28K (ffffffff81e65000 -
ffffffff81e6c000)
[ 1.367286] ACPI: Core revision 20130517
[ 1.370761] ACPI: All ACPI Tables successfully acquired
[ 1.382180] ftrace: allocating 27796 entries in 109 pages
[ 1.393056] cpu 0 spinlock event irq 41
[ 1.393142] Performance Events: unsupported p6 CPU model 42 no PMU
driver, software events only.
[ 1.394402] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 1.394522] installing Xen timer for CPU 1
[ 1.394591] cpu 1 spinlock event irq 48
[ 1.394891] installing Xen timer for CPU 2
[ 1.394959] cpu 2 spinlock event irq 55
[ 1.395260] installing Xen timer for CPU 3
[ 1.395327] cpu 3 spinlock event irq 62
[ 1.395569] Brought up 4 CPUs
[ 1.395926] devtmpfs: initialized
[ 1.396704] EVM: security.selinux
[ 1.396767] EVM: security.SMACK64
[ 1.396830] EVM: security.capability
[ 1.396941] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff]
(1048576 bytes)
[ 1.397621] xen:grant_table: Grant tables using version 2 layout
[ 1.397696] Grant table initialized
[ 1.397793] regulator-dummy: no parameters
[ 1.397894] RTC time: 14:41:51, date: 02/05/14
[ 1.397984] NET: Registered protocol family 16
[ 1.398201] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 1.398286] ACPI: bus type PCI registered
[ 1.398350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.398510] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.398598] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 1.432711] PCI: Using configuration type 1 for base access
[ 1.433538] bio: create slab <bio-0> at 0
[ 1.433778] ACPI: Added _OSI(Module Device)
[ 1.433842] ACPI: Added _OSI(Processor Device)
[ 1.433906] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.433970] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.435216] ACPI: EC: Look up EC in DSDT
[ 1.436350] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.438454] ACPI: SSDT 00000000bf64d018 0083B (v01 PmRef Cpu0Cst
00003001 INTL 20080729)
[ 1.438904] ACPI: Dynamic OEM Table Load:
[ 1.439048] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst
00003001 INTL 20080729)
[ 1.443713] ACPI: SSDT 00000000bf64ea98 00303 (v01 PmRef ApIst
00003000 INTL 20080729)
[ 1.444187] ACPI: Dynamic OEM Table Load:
[ 1.444329] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20080729)
[ 1.447686] ACPI: SSDT 00000000bf64cd98 00119 (v01 PmRef ApCst
00003000 INTL 20080729)
[ 1.448137] ACPI: Dynamic OEM Table Load:
[ 1.448283] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20080729)
[ 1.452128] ACPI: Interpreter enabled
[ 1.452195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20130517/hwxface-571)
[ 1.452363] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130517/hwxface-571)
[ 1.452532] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S3_] (20130517/hwxface-571)
[ 1.452707] ACPI: (supports S0 S4 S5)
[ 1.452770] ACPI: Using IOAPIC for interrupt routing
[ 1.452873] HEST: Table parsing has been initialized.
[ 1.452939] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 1.453111] ACPI: No dock devices found.
[ 1.456960] ACPI: Power Resource [FN00] (off)
[ 1.457089] ACPI: Power Resource [FN01] (off)
[ 1.457214] ACPI: Power Resource [FN02] (off)
[ 1.457337] ACPI: Power Resource [FN03] (off)
[ 1.457461] ACPI: Power Resource [FN04] (off)
[ 1.458079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.458287] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 1.458734] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 1.459314] PCI host bridge to bus 0000:00
[ 1.459378] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.459443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.459511] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.459577] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 1.459645] pci_bus 0000:00: root bus resource [mem
0xc0000000-0xfeafffff]
[ 1.459723] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000
[ 1.459852] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 1.459929] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.459971] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.460161] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.460511] pci 0000:00:1a.0: reg 0x10: [mem 0xc5e06000-0xc5e063ff]
[ 1.462352] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.462422] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.462534] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.462707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.462766] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.462897] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.463216] pci 0000:00:1d.0: reg 0x10: [mem 0xc5e05000-0xc5e053ff]
[ 1.465054] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.465119] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.465225] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 1.465383] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.465489] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100
[ 1.465769] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 1.465815] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 1.465833] pci 0000:00:1f.2: reg 0x14: [io 0x4054-0x4057]
[ 1.465850] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 1.465868] pci 0000:00:1f.2: reg 0x1c: [io 0x4050-0x4053]
[ 1.465885] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 1.465903] pci 0000:00:1f.2: reg 0x24: [mem 0xc5e04000-0xc5e047ff]
[ 1.466021] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.466114] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.466148] pci 0000:00:1f.3: reg 0x10: [mem 0xc5e02000-0xc5e020ff 64bit]
[ 1.466198] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 1.466379] pci 0000:01:00.0: [111d:8018] type 01 class 0x060400
[ 1.466480] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.466506] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.474241] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 1.474311] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff]
[ 1.474315] pci 0000:00:01.0: bridge window [mem 0xc5400000-0xc5dfffff]
[ 1.474401] pci 0000:02:02.0: [111d:8018] type 01 class 0x060400
[ 1.474517] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 1.474587] pci 0000:02:04.0: [111d:8018] type 01 class 0x060400
[ 1.474702] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 1.474789] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 1.474862] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 1.474867] pci 0000:01:00.0: bridge window [mem 0xc5400000-0xc5dfffff]
[ 1.474964] pci 0000:03:00.0: [8086:10c9] type 00 class 0x020000
[ 1.474985] pci 0000:03:00.0: reg 0x10: [mem 0xc5d20000-0xc5d3ffff]
[ 1.475014] pci 0000:03:00.0: reg 0x18: [io 0x3020-0x303f]
[ 1.475029] pci 0000:03:00.0: reg 0x1c: [mem 0xc5d44000-0xc5d47fff]
[ 1.475153] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.475204] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.475230] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.475326] pci 0000:03:00.1: [8086:10c9] type 00 class 0x020000
[ 1.475347] pci 0000:03:00.1: reg 0x10: [mem 0xc5d00000-0xc5d1ffff]
[ 1.475376] pci 0000:03:00.1: reg 0x18: [io 0x3000-0x301f]
[ 1.475391] pci 0000:03:00.1: reg 0x1c: [mem 0xc5d40000-0xc5d43fff]
[ 1.475514] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 1.475565] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.475591] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.475688] pci 0000:02:02.0: PCI bridge to [bus 03]
[ 1.475760] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 1.475765] pci 0000:02:02.0: bridge window [mem 0xc5d00000-0xc5dfffff]
[ 1.475864] pci 0000:04:00.0: [8086:10e8] type 00 class 0x020000
[ 1.475885] pci 0000:04:00.0: reg 0x10: [mem 0xc5c20000-0xc5c3ffff]
[ 1.475900] pci 0000:04:00.0: reg 0x14: [mem 0xc5800000-0xc5bfffff]
[ 1.475915] pci 0000:04:00.0: reg 0x18: [io 0x2020-0x203f]
[ 1.475930] pci 0000:04:00.0: reg 0x1c: [mem 0xc5c44000-0xc5c47fff]
[ 1.475973] pci 0000:04:00.0: reg 0x30: [mem 0xffc00000-0xffffffff pref]
[ 1.476055] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 1.476107] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.476133] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.476231] pci 0000:04:00.1: [8086:10e8] type 00 class 0x020000
[ 1.476251] pci 0000:04:00.1: reg 0x10: [mem 0xc5c00000-0xc5c1ffff]
[ 1.476266] pci 0000:04:00.1: reg 0x14: [mem 0xc5400000-0xc57fffff]
[ 1.476281] pci 0000:04:00.1: reg 0x18: [io 0x2000-0x201f]
[ 1.476297] pci 0000:04:00.1: reg 0x1c: [mem 0xc5c40000-0xc5c43fff]
[ 1.476339] pci 0000:04:00.1: reg 0x30: [mem 0xffc00000-0xffffffff pref]
[ 1.476422] pci 0000:04:00.1: PME# supported from D0 D3hot
[ 1.476473] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.476500] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.476599] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 1.476671] pci 0000:02:04.0: bridge window [io 0x2000-0x2fff]
[ 1.476676] pci 0000:02:04.0: bridge window [mem 0xc5400000-0xc5cfffff]
[ 1.476860] pci 0000:05:00.0: [14e4:163b] type 00 class 0x020000
[ 1.476901] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xc1ffffff 64bit]
[ 1.477142] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.477183] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 1.477332] pci 0000:05:00.1: [14e4:163b] type 00 class 0x020000
[ 1.477373] pci 0000:05:00.1: reg 0x10: [mem 0xc2000000-0xc3ffffff 64bit]
[ 1.477613] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 1.477744] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 1.477817] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 1.477908] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
[ 1.477940] pci 0000:06:03.0: reg 0x10: [mem 0xc4000000-0xc47fffff pref]
[ 1.477958] pci 0000:06:03.0: reg 0x14: [mem 0xc5000000-0xc5003fff]
[ 1.477975] pci 0000:06:03.0: reg 0x18: [mem 0xc4800000-0xc4ffffff]
[ 1.478041] pci 0000:06:03.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.478192] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 1.478276] pci 0000:00:1e.0: bridge window [mem 0xc4800000-0xc50fffff]
[ 1.478287] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc47fffff
64bit pref]
[ 1.478289] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.478290] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 1.478291] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 1.478293] pci 0000:00:1e.0: bridge window [mem
0xc0000000-0xfeafffff] (subtractive decode)
[ 1.478320] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
unsupported)
[ 1.478878] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14
15)
[ 1.479470] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14
15)
[ 1.480057] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14
15)
[ 1.480644] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 10 11 12 14
15)
[ 1.481231] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 *14
15)
[ 1.481820] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 10 11 12 14
15)
[ 1.482415] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 1.483098] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14
*15)
[ 1.483877] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.484025] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.484067] Found 1 acpi root devices
[ 1.484088] xen:balloon: Initialising balloon driver
[ 1.491154] xen_balloon: Initialising balloon driver
[ 1.491414] vgaarb: device added:
PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.491502] vgaarb: loaded
[ 1.491563] vgaarb: bridge control possible 0000:06:03.0
[ 1.491760] SCSI subsystem initialized
[ 1.491825] ACPI: bus type ATA registered
[ 1.491921] libata version 3.00 loaded.
[ 1.491934] ACPI: bus type USB registered
[ 1.492011] usbcore: registered new interface driver usbfs
[ 1.492079] usbcore: registered new interface driver hub
[ 1.492264] usbcore: registered new device driver usb
[ 1.492551] PCI: Using ACPI for IRQ routing
[ 1.510875] PCI: pci_cache_line_size set to 64 bytes
[ 1.510968] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.510969] e820: reserve RAM buffer [mem 0xbdfb0000-0xbfffffff]
[ 1.510971] e820: reserve RAM buffer [mem 0xbf5d7000-0xbfffffff]
[ 1.510973] e820: reserve RAM buffer [mem 0xbf5ea000-0xbfffffff]
[ 1.510974] e820: reserve RAM buffer [mem 0xbf5f0000-0xbfffffff]
[ 1.510975] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[ 1.510977] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 1.511048] NetLabel: Initializing
[ 1.511111] NetLabel: domain hash size = 128
[ 1.511175] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.511246] NetLabel: unlabeled traffic allowed by default
[ 1.511498] Switched to clocksource xen
[ 1.516125] AppArmor: AppArmor Filesystem Enabled
[ 1.516207] pnp: PnP ACPI init
[ 1.516276] ACPI: bus type PNP registered
[ 1.516483] pnp 00:00: Plug and Play ACPI device, IDs IPI0001 (active)
[ 1.516491] pnp 00:01: [dma 4]
[ 1.516503] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.516519] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.516581] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.516589] xen: registering gsi 13 triggering 1 polarity 0
[ 1.516622] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.516657] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.516726] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.516793] system 00:05: [io 0x1010-0x1013] has been reserved
[ 1.516859] system 00:05: [io 0xffff] has been reserved
[ 1.516924] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 1.516991] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.517057] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.517123] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.517191] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.517197] xen: registering gsi 8 triggering 1 polarity 0
[ 1.517224] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.517256] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.517322] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 1.517527] xen: registering gsi 4 triggering 1 polarity 0
[ 1.517570] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.517659] xen: registering gsi 3 triggering 1 polarity 0
[ 1.517701] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.517727] system 00:0a: [mem 0xfed90000-0xfed91fff] has been reserved
[ 1.517796] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.517934] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.518003] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.518071] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.518140] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.518208] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.518275] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.518343] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 1.518411] system 00:0b: [mem 0xff000000-0xffffffff] could not be
reserved
[ 1.518479] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 1.518547] system 00:0b: [mem 0xc5f00000-0xc5f00fff] has been reserved
[ 1.518616] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.518775] pnp: PnP ACPI: found 12 devices
[ 1.518839] ACPI: bus type PNP unregistered
[ 1.524234] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 1.524305] pci 0000:04:00.0: no compatible bridge window for [mem
0xffc00000-0xffffffff pref]
[ 1.524391] pci 0000:04:00.1: no compatible bridge window for [mem
0xffc00000-0xffffffff pref]
[ 1.524478] pci 0000:06:03.0: no compatible bridge window for [mem
0xffff0000-0xffffffff pref]
[ 1.524567] PCI: max bus depth: 3 pci_try_num: 4
[ 1.524643] pci 0000:00:01.0: BAR 15: assigned [mem
0xc6000000-0xc67fffff pref]
[ 1.524727] pci 0000:01:00.0: BAR 15: assigned [mem
0xc6000000-0xc67fffff pref]
[ 1.524811] pci 0000:02:04.0: BAR 15: assigned [mem
0xc6000000-0xc67fffff pref]
[ 1.524914] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.524930] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.524946] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.524962] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.524978] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.524994] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.525010] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.525026] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.525042] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.525059] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.525075] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.525077] pci 0000:03:00.0: BAR 7: assigned [mem 0xc5d48000-0xc5d67fff
64bit]
[ 1.525184] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.525186] pci 0000:03:00.0: BAR 10: assigned [mem
0xc5d68000-0xc5d87fff 64bit]
[ 1.525294] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.525296] pci 0000:03:00.1: BAR 7: assigned [mem 0xc5d88000-0xc5da7fff
64bit]
[ 1.526660] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.526661] pci 0000:03:00.1: BAR 10: assigned [mem
0xc5da8000-0xc5dc7fff 64bit]
[ 1.526755] pci 0000:02:02.0: PCI bridge to [bus 03]
[ 1.526822] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 1.526894] pci 0000:02:02.0: bridge window [mem 0xc5d00000-0xc5dfffff]
[ 1.526986] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527003] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527019] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527035] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527051] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527067] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527083] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527099] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527115] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527131] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527147] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527149] pci 0000:04:00.0: BAR 6: assigned [mem 0xc6000000-0xc63fffff
pref]
[ 1.527233] pci 0000:04:00.1: BAR 6: assigned [mem 0xc6400000-0xc67fffff
pref]
[ 1.527331] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527333] pci 0000:04:00.0: BAR 7: assigned [mem 0xc5c48000-0xc5c67fff
64bit]
[ 1.527441] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527443] pci 0000:04:00.0: BAR 10: assigned [mem
0xc5c68000-0xc5c87fff 64bit]
[ 1.527557] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff
64bit]
[ 1.527559] pci 0000:04:00.1: BAR 7: assigned [mem 0xc5c88000-0xc5ca7fff
64bit]
[ 1.527669] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff
64bit]
[ 1.527671] pci 0000:04:00.1: BAR 10: assigned [mem
0xc5ca8000-0xc5cc7fff 64bit]
[ 1.527764] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 1.527831] pci 0000:02:04.0: bridge window [io 0x2000-0x2fff]
[ 1.527903] pci 0000:02:04.0: bridge window [mem 0xc5400000-0xc5cfffff]
[ 1.527975] pci 0000:02:04.0: bridge window [mem 0xc6000000-0xc67fffff
pref]
[ 1.528064] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 1.528131] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 1.528203] pci 0000:01:00.0: bridge window [mem 0xc5400000-0xc5dfffff]
[ 1.528275] pci 0000:01:00.0: bridge window [mem 0xc6000000-0xc67fffff
pref]
[ 1.528364] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 1.528429] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff]
[ 1.528498] pci 0000:00:01.0: bridge window [mem 0xc5400000-0xc5dfffff]
[ 1.528567] pci 0000:00:01.0: bridge window [mem 0xc6000000-0xc67fffff
pref]
[ 1.528655] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 1.528727] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 1.528809] pci 0000:06:03.0: BAR 6: assigned [mem 0xc5010000-0xc501ffff
pref]
[ 1.528891] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 1.528963] pci 0000:00:1e.0: bridge window [mem 0xc4800000-0xc50fffff]
[ 1.529036] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc47fffff
64bit pref]
[ 1.529194] xen: registering gsi 16 triggering 0 polarity 1
[ 1.529206] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 1.529301] xen: registering gsi 17 triggering 0 polarity 1
[ 1.529308] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 1.529334] pci 0000:00:1e.0: setting latency timer to 64
[ 1.529339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.529340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.529341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.529343] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 1.529344] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
[ 1.529346] pci_bus 0000:01: resource 1 [mem 0xc5400000-0xc5dfffff]
[ 1.529347] pci_bus 0000:01: resource 2 [mem 0xc6000000-0xc67fffff pref]
[ 1.529349] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 1.529350] pci_bus 0000:02: resource 1 [mem 0xc5400000-0xc5dfffff]
[ 1.529351] pci_bus 0000:02: resource 2 [mem 0xc6000000-0xc67fffff pref]
[ 1.529353] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 1.529354] pci_bus 0000:03: resource 1 [mem 0xc5d00000-0xc5dfffff]
[ 1.529356] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 1.529357] pci_bus 0000:04: resource 1 [mem 0xc5400000-0xc5cfffff]
[ 1.529359] pci_bus 0000:04: resource 2 [mem 0xc6000000-0xc67fffff pref]
[ 1.529360] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc3ffffff]
[ 1.529362] pci_bus 0000:06: resource 1 [mem 0xc4800000-0xc50fffff]
[ 1.529363] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc47fffff 64bit
pref]
[ 1.529365] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 1.529366] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 1.529367] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.529369] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfeafffff]
[ 1.529390] NET: Registered protocol family 2
[ 1.529604] TCP established hash table entries: 32768 (order: 7, 524288
bytes)
[ 1.529810] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.529938] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.530019] TCP: reno registered
[ 1.530091] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.530172] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.530283] NET: Registered protocol family 1
[ 1.530418] xen: registering gsi 20 triggering 0 polarity 1
[ 1.530425] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 1.543873] xen: registering gsi 23 triggering 0 polarity 1
[ 1.543879] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 1.559714] pci 0000:06:03.0: Boot video device
[ 1.559720] PCI: CLS 64 bytes, default 64
[ 1.559755] Trying to unpack rootfs image as initramfs...
[ 1.595644] Freeing initrd memory: 48296K (ffff8800023f3000 -
ffff88000531d000)
[ 1.595844] Simple Boot Flag at 0x44 set to 0x1
[ 1.596123] Scanning for low memory corruption every 60 seconds
[ 1.596685] Initialise module verification
[ 1.596786] audit: initializing netlink socket (disabled)
[ 1.596864] type=2000 audit(1391611311.580:1): initialized
[ 1.616847] bounce pool size: 64 pages
[ 1.616918] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.617727] zbud: loaded
[ 1.617893] VFS: Disk quotas dquot_6.5.2
[ 1.617987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.618401] fuse init (API version 7.22)
[ 1.618521] msgmni has been set to 1736
[ 1.619054] Key type asymmetric registered
[ 1.619120] Asymmetric key parser 'x509' registered
[ 1.619214] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 1.619332] io scheduler noop registered
[ 1.619396] io scheduler deadline registered (default)
[ 1.619479] io scheduler cfq registered
[ 1.620180] pcieport 0000:00:01.0: Signaling PME through PCIe PME
interrupt
[ 1.620249] pcieport 0000:01:00.0: Signaling PME through PCIe PME
interrupt
[ 1.620318] pcieport 0000:02:02.0: Signaling PME through PCIe PME
interrupt
[ 1.620386] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.620455] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 1.620522] pcieport 0000:02:04.0: Signaling PME through PCIe PME
interrupt
[ 1.620590] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.620656] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 1.620727] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.620753] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[ 1.620821] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.620889] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 1.620961] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.620971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.621045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.621152] intel_idle: MWAIT substates: 0x1120
[ 1.621154] intel_idle: v0.4 model 0x2A
[ 1.621154] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.621199] intel_idle: intel_idle yielding to none
[ 1.621262] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.621349] ACPI: Power Button [PWRF]
[ 1.621476] ACPI: Fan [FAN0] (off)
[ 1.621558] ACPI: Fan [FAN1] (off)
[ 1.621637] ACPI: Fan [FAN2] (off)
[ 1.621716] ACPI: Fan [FAN3] (off)
[ 1.621794] ACPI: Fan [FAN4] (off)
[ 1.621891] ACPI: Requesting acpi_cpufreq
[ 1.622414] Monitor-Mwait will be used to enter C-1 state
[ 1.622420] Monitor-Mwait will be used to enter C-2 state
[ 1.622423] Monitor-Mwait will be used to enter C-3 state
[ 1.624107] Warning: Processor Platform Limit not supported.
[ 1.624296] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.624364] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.624474] ERST: Error Record Serialization Table (ERST) support is
initialized.
[ 1.624559] pstore: Registered erst as persistent store backend
[ 1.624741] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[ 1.625188] xen_acpi_processor: Uploading Xen processor PM info
[ 1.626366] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.647206] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.668059] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.669363] hpet_acpi_add: no address or irqs in _CRS
[ 1.669440] Linux agpgart interface v0.103
[ 1.670447] brd: module loaded
[ 1.671000] loop: module loaded
[ 1.671294] libphy: Fixed MDIO Bus: probed
[ 1.671407] tun: Universal TUN/TAP device driver, 1.6
[ 1.671611] PPP generic driver version 2.4.2
[ 1.671716] xen_netfront: Initialising Xen virtual ethernet driver
[ 1.671791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.671857] ehci-pci: EHCI PCI platform driver
[ 1.671999] xen: registering gsi 20 triggering 0 polarity 1
[ 1.672002] Already setup the GSI :20
[ 1.672084] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.672092] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.672160] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 1.672260] ehci-pci 0000:00:1a.0: debug port 2
[ 1.676261] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.676301] ehci-pci 0000:00:1a.0: irq 20, io mem 0xc5e06000
[ 1.687584] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.687679] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.687747] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.687831] usb usb1: Product: EHCI Host Controller
[ 1.687896] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[ 1.687963] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.688117] hub 1-0:1.0: USB hub found
[ 1.688184] hub 1-0:1.0: 2 ports detected
[ 1.688391] xen: registering gsi 23 triggering 0 polarity 1
[ 1.688393] Already setup the GSI :23
[ 1.688472] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.688479] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.688546] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 1.688647] ehci-pci 0000:00:1d.0: debug port 2
[ 1.692645] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.692683] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc5e05000
[ 1.703612] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.703694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.703762] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.703847] usb usb2: Product: EHCI Host Controller
[ 1.703911] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[ 1.703979] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.704211] hub 2-0:1.0: USB hub found
[ 1.704279] hub 2-0:1.0: 2 ports detected
[ 1.704405] ehci-platform: EHCI generic platform driver
[ 1.704476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.704544] ohci-platform: OHCI generic platform driver
[ 1.704612] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.704718] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.751476] i8042: No controller found
[ 2.751800] mousedev: PS/2 mouse device common for all mice
[ 2.752046] rtc_cmos 00:06: RTC can wake from S4
[ 2.752293] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.752416] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[ 2.752522] device-mapper: uevent: version 1.0.3
[ 2.752670] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised:
[ 2.752762] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.752882] TCP: cubic registered
[ 2.753000] NET: Registered protocol family 10
[ 2.753191] NET: Registered protocol family 17
[ 2.753260] Key type dns_resolver registered
[ 2.753510] PM: Hibernation image not present or could not be loaded.
[ 2.753513] Loading module verification certificates
[ 2.754269] MODSIGN: Loaded cert 'Magrathea: Glacier signing key:
fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
[ 2.754368] registered taskstats version 1
[ 2.757449] Key type trusted registered
[ 2.760138] Key type encrypted registered
[ 2.762801] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.763263] Magic number: 2:965:686
[ 2.763400] rtc_cmos 00:06: setting system clock to 2014-02-05 14:41:52
UTC (1391611312)
[ 2.763537] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.764099] Freeing unused kernel memory: 1364K (ffffffff81d10000 -
ffffffff81e65000)
[ 2.764184] Write protecting the kernel read-only data: 12288k
[ 2.766969] Freeing unused kernel memory: 1040K (ffff8800016fc000 -
ffff880001800000)
[ 2.767344] Freeing unused kernel memory: 836K (ffff880001b2f000 -
ffff880001c00000)
[ 2.788864] systemd-udevd[118]: starting version 204
[ 2.810809] pps_core: module verification failed: signature and/or
required key missing - tainting kernel
[ 2.810979] pps_core: LinuxPPS API ver. 1 registered
[ 2.811045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
[ 2.811354] PTP clock support registered
[ 2.812518] dca service started, version 1.12.1
[ 2.816654] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.0.5-k
[ 2.816725] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 2.816857] xen: registering gsi 18 triggering 0 polarity 1
[ 2.816874] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 2.819595] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
v2.2.3 (June 27, 2012)
[ 2.819730] xen: registering gsi 16 triggering 0 polarity 1
[ 2.819732] Already setup the GSI :16
[ 2.820521] bnx2 0000:05:00.0 eth0: Broadcom NetXtreme II BCM5716
1000Base-T (C0) PCI Express found at mem c0000000, IRQ 16, node addr
d4:ae:52:cc:f9:6a
[ 2.820664] xen: registering gsi 17 triggering 0 polarity 1
[ 2.820666] Already setup the GSI :17
[ 2.821461] bnx2 0000:05:00.1 eth1: Broadcom NetXtreme II BCM5716
1000Base-T (C0) PCI Express found at mem c2000000, IRQ 17, node addr
d4:ae:52:cc:f9:6b
[ 2.821768] ahci 0000:00:1f.2: version 3.0
[ 2.821852] xen: registering gsi 19 triggering 0 polarity 1
[ 2.821860] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 2.821957] ahci: SSS flag set, parallel bus scan disabled
[ 2.835589] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps
0x31 impl SATA mode
[ 2.835678] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum
part ems sxs apst
[ 2.835776] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.851919] scsi0 : ahci
[ 2.852047] scsi1 : ahci
[ 2.852167] scsi2 : ahci
[ 2.852288] scsi3 : ahci
[ 2.852404] scsi4 : ahci
[ 2.852521] scsi5 : ahci
[ 2.852632] ata1: SATA max UDMA/133 abar m2048@0xc5e04000 port
0xc5e04100 irq 76
[ 2.852725] ata2: DUMMY
[ 2.852792] ata3: DUMMY
[ 2.852861] ata4: DUMMY
[ 2.852923] ata5: SATA max UDMA/133 abar m2048@0xc5e04000 port
0xc5e04300 irq 76
[ 2.853005] ata6: SATA max UDMA/133 abar m2048@0xc5e04000 port
0xc5e04380 irq 76
[ 2.930272] igb: probe of 0000:03:00.0 failed with error -2
[ 2.930359] xen: registering gsi 19 triggering 0 polarity 1
[ 2.930362] Already setup the GSI :19
[ 2.963572] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.043827] igb: probe of 0000:03:00.1 failed with error -2
[ 3.043911] xen: registering gsi 16 triggering 0 polarity 1
[ 3.043913] Already setup the GSI :16
[ 3.096098] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.096169] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.096582] hub 1-1:1.0: USB hub found
[ 3.096766] hub 1-1:1.0: 6 ports detected
[ 3.171651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.172622] ata1.00: ATA-8: WDC WD5003ABYX-18WERA0, 01.01S03, max
UDMA/133
[ 3.172692] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 3.174631] ata1.00: configured for UDMA/133
[ 3.174899] scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-1
01.0 PQ: 0 ANSI: 5
[ 3.175124] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 3.175136] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.175305] sd 0:0:0:0: [sda] Write Protect is off
[ 3.175372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.175385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.207533] sda: sda1 sda2 < sda5 >
[ 3.207988] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.211574] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.343975] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.344045] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.344429] hub 2-1:1.0: USB hub found
[ 3.344656] hub 2-1:1.0: 6 ports detected
[ 3.491623] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.495871] ata5.00: ATAPI: TSSTcorp DVD-ROM SN-108DN, D150, max UDMA/100
[ 3.502634] ata5.00: configured for UDMA/100
[ 3.523150] scsi 4:0:0:0: CD-ROM TSSTcorp DVD-ROM SN-108DN
D150 PQ: 0 ANSI: 5
[ 3.533834] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.533904] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.534114] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.534176] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.615704] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 3.721480] usb 2-1.1: New USB device found, idVendor=0b95,
idProduct=1780
[ 3.721550] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.721633] usb 2-1.1: Product: AX88178
[ 3.721696] usb 2-1.1: Manufacturer: ASIX Elec. Corp.
[ 3.721760] usb 2-1.1: SerialNumber: 000002
[ 3.791674] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[ 3.851623] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.896023] usb 2-1.2: New USB device found, idVendor=1061,
idProduct=0101
[ 3.896102] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.896184] usb 2-1.2: Product: USB Keyboard & Mouse
[ 3.896248] usb 2-1.2: Manufacturer: Motorola
[ 3.903720] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.911687] usbcore: registered new interface driver usbhid
[ 3.911754] usbhid: USB HID core driver
[ 3.913114] input: Motorola USB Keyboard & Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[ 3.913287] hid-generic 0003:1061:0101.0001: input,hidraw0: USB HID
v1.11 Keyboard [Motorola USB Keyboard & Mouse] on
usb-0000:00:1d.0-1.2/input0
[ 3.913465] input: Motorola USB Keyboard & Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2
[ 3.913648] hid-generic 0003:1061:0101.0002: input,hidraw1: USB HID
v1.11 Mouse [Motorola USB Keyboard & Mouse] on usb-0000:00:1d.0-1.2/input1
[ 3.971702] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[ 4.004005] igb 0000:04:00.0: added PHC on eth2
[ 4.004073] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 4.004141] igb 0000:04:00.0: eth2: (PCIe:2.5Gb/s:Width x4)
90:e2:ba:53:e5:24
[ 4.004210] igb 0000:04:00.0: eth2: PBA No: Unknown
[ 4.004275] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4
tx queue(s)
[ 4.004403] xen: registering gsi 17 triggering 0 polarity 1
[ 4.004406] Already setup the GSI :17
[ 4.063964] usb 2-1.5: New USB device found, idVendor=0424,
idProduct=2514
[ 4.064034] usb 2-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.064453] hub 2-1.5:1.0: USB hub found
[ 4.064664] hub 2-1.5:1.0: 4 ports detected
[ 4.115846] bio: create slab <bio-1> at 1
[ 4.550844] EXT4-fs (dm-0): mounted filesystem with ordered data mode.
Opts: (null)
[ 4.968014] igb 0000:04:00.1: added PHC on eth3
[ 4.968096] igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network
Connection
[ 4.968164] igb 0000:04:00.1: eth3: (PCIe:2.5Gb/s:Width x4)
90:e2:ba:53:e5:25
[ 4.968233] igb 0000:04:00.1: eth3: PBA No: Unknown
[ 4.968298] igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4
tx queue(s)
[ 6.364613] Adding 4161532k swap on /dev/mapper/fiat--vg-swap_1.
Priority:-1 extents:1 across:4161532k FS
[ 6.900721] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.078991] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.078996] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.079000] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 7.079004] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 7.371646] systemd-udevd[361]: starting version 204
[ 7.878340] lp: driver loaded but no devices found
[ 9.826047] wmi: Mapper loaded
[ 9.843887] systemd-udevd[460]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.846621] systemd-udevd[465]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.847206] systemd-udevd[466]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.849555] systemd-udevd[467]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.851680] systemd-udevd[469]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.853643] systemd-udevd[472]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.855475] systemd-udevd[474]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.857872] systemd-udevd[476]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.859002] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 9.859007] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.859011] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO
conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 9.859013] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.859014] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 9.859017] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.859018] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 9.859020] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.859021] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.879903] systemd-udevd[487]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 9.897625] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[ 10.062885] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 10.395062] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[ 10.400676] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[ 10.401495] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[ 10.402320] microcode: Microcode Update Driver: v2.00 <
[ 10.610920] systemd-udevd[570]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 10.610941] systemd-udevd[571]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 10.612923] systemd-udevd[573]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 10.749729] Bluetooth: Core ver 2.16
[ 10.749748] NET: Registered protocol family 31
[ 10.749750] Bluetooth: HCI device and connection manager initialized
[ 10.749756] Bluetooth: HCI socket layer initialized
[ 10.749758] Bluetooth: L2CAP socket layer initialized
[ 10.749762] Bluetooth: SCO socket layer initialized
[ 10.922110] type=1400 audit(1391611320.655:2): apparmor="STATUS"
operation="profile_load" parent=544 profile=""
name="/sbin/dhclient" pid=560 comm="apparmor_parser"
[ 10.922117] type=1400 audit(1391611320.655:3): apparmor="STATUS"
operation="profile_load" parent=544 profile=""
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=560
comm="apparmor_parser"
[ 10.922120] type=1400 audit(1391611320.655:4): apparmor="STATUS"
operation="profile_load" parent=544 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=560
comm="apparmor_parser"
[ 10.922132] type=1400 audit(1391611320.655:5): apparmor="STATUS"
operation="profile_replace" parent=542 profile=""
name="/sbin/dhclient" pid=556 comm="apparmor_parser"
[ 10.922139] type=1400 audit(1391611320.655:6): apparmor="STATUS"
operation="profile_replace" parent=542 profile=""
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556
comm="apparmor_parser"
[ 10.922142] type=1400 audit(1391611320.655:7): apparmor="STATUS"
operation="profile_replace" parent=542 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=556
comm="apparmor_parser"
[ 10.922156] type=1400 audit(1391611320.655:8): apparmor="STATUS"
operation="profile_replace" parent=543 profile=""
name="/sbin/dhclient" pid=559 comm="apparmor_parser"
[ 10.922162] type=1400 audit(1391611320.655:9): apparmor="STATUS"
operation="profile_replace" parent=543 profile=""
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559
comm="apparmor_parser"
[ 10.922166] type=1400 audit(1391611320.655:10): apparmor="STATUS"
operation="profile_replace" parent=543 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=559
comm="apparmor_parser"
[ 10.922186] type=1400 audit(1391611320.655:11): apparmor="STATUS"
operation="profile_replace" parent=547 profile=""
name="/sbin/dhclient" pid=557 comm="apparmor_parser"
[ 10.960369] Bluetooth: RFCOMM TTY layer initialized
[ 10.960378] Bluetooth: RFCOMM socket layer initialized
[ 10.960379] Bluetooth: RFCOMM ver 1.11
[ 11.096147] init: avahi-cups-reload main process (598) terminated with
status 1
[ 11.167124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.167127] Bluetooth: BNEP filters: protocol multicast
[ 11.167134] Bluetooth: BNEP socket layer initialized
[ 11.287751] asix 2-1.1:1.0 eth0: register 'asix' at
usb-0000:00:1d.0-1.1, ASIX AX88178 USB 2.0 Ethernet, 00:0e:c6:88:f6:d3
[ 11.287788] usbcore: registered new interface driver asix
[ 11.288748] systemd-udevd[642]: failed to execute
'/lib/udev/socket:/org/xen/xend/udev_event'
'socket:/org/xen/xend/udev_event': No such file or directory
[ 11.341535] ppdev: user-space parallel port driver
[ 11.696251] Bridge firewalling registered
[ 11.699221] device eth0 entered promiscuous mode
[ 12.437016] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.437109] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 15.138103] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.139187] asix 2-1.1:1.0 eth0: link up, 1000Mbps, full-duplex, lpa
0xC5E1
[ 15.143931] xenbr0: port 1(eth0) entered forwarding state
[ 15.143942] xenbr0: port 1(eth0) entered forwarding state
[ 15.143955] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 15.768228] init: udev-fallback-graphics main process (932) terminated
with status 1
[ 17.202300] init: failsafe main process (628) killed by TERM signal
[ 17.799180] audit_printk_skb: 69 callbacks suppressed
[ 17.799184] type=1400 audit(1391611327.531:35): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/sbin/dhclient" pid=1361 comm="apparmor_parser"
[ 17.799189] type=1400 audit(1391611327.531:36): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1361
comm="apparmor_parser"
[ 17.799193] type=1400 audit(1391611327.531:37): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=1361
comm="apparmor_parser"
[ 17.799644] type=1400 audit(1391611327.535:38): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1361
comm="apparmor_parser"
[ 17.799649] type=1400 audit(1391611327.535:39): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=1361
comm="apparmor_parser"
[ 17.799876] type=1400 audit(1391611327.535:40): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="/usr/lib/connman/scripts/dhclient-script" pid=1361
comm="apparmor_parser"
[ 18.034955] type=1400 audit(1391611327.767:41): apparmor="STATUS"
operation="profile_load" parent=1353 profile=""
name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper"
pid=1359 comm="apparmor_parser"
[ 18.034960] type=1400 audit(1391611327.767:42): apparmor="STATUS"
operation="profile_load" parent=1353 profile=""
name="chromium_browser" pid=1359 comm="apparmor_parser"
[ 18.035292] type=1400 audit(1391611327.767:43): apparmor="STATUS"
operation="profile_replace" parent=1353 profile=""
name="chromium_browser" pid=1359 comm="apparmor_parser"
[ 18.067968] type=1400 audit(1391611327.803:44): apparmor="STATUS"
operation="profile_load" parent=1353 profile=""
name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper"
pid=1360 comm="apparmor_parser"
[ 19.521968] xen:xen_evtchn: Event-channel device installed
[ 20.668188] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 20.668698] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 21.508464] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 21.508911] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 21.600614] bnx2 0000:05:00.0 eth3: using MSIX
[ 21.600639] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 21.601034] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 21.656654] bnx2 0000:05:00.1 eth1: using MSIX
[ 21.656676] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.657027] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.168115] xenbr0: port 1(eth0) entered forwarding state
[ 679.030308] xen_pciback: backend is passthrough
[ 679.119557] pciback 0000:05:00.0: seizing device
[ 679.135333] xen: registering gsi 16 triggering 0 polarity 1
[ 679.135338] Already setup the GSI :16
[ 679.223564] pciback 0000:05:00.1: seizing device
[ 679.239332] xen: registering gsi 17 triggering 0 polarity 1
[ 679.239337] Already setup the GSI :17
[ 826.675306] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 826.675650] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 826.847467] device vif1.0 entered promiscuous mode
[ 827.529251] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 827.871604] device vif1.0-emu entered promiscuous mode
[ 827.872947] xenbr0: port 3(vif1.0-emu) entered forwarding state
[ 827.872953] xenbr0: port 3(vif1.0-emu) entered forwarding state
[ 842.899266] xenbr0: port 3(vif1.0-emu) entered forwarding state
/etc/xen/ubuntu-hvm-0.cfg
kernel = "/usr/lib/xen-4.3/boot/hvmloader"
builder='hvm'
memory = 1024
vcpus=2
name = "ubuntu-hvm-0"
vif = ['bridge=xenbr0']
pci_permissive=1
pci= ['05:00.0', '05:00.1']
disk =
acpi = 1
device_model = 'qemu-dm'
boot="d"
sdl=0
serial='pty'
vnc=1
#vnclisten=""
vncpasswd=""
Any suggestions?
On Wed, Feb 5, 2014 at 8:54 AM, Mike Neiderhauser <
I have. But I cant seem to get the xm toolstack to switch with xl.
Regards
On Wed, 2014-02-05 at 08:43 -0500, Mike Neiderhauser wrote:
Do you have any suggestions for a setup guide for 4.3? I have
installed xen-hypervisor-4.3-amd64 from ubuntu package manger and I
don't know where to go from here.
Have you looked on the wiki?
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
_______________________________________________
Xen-users mailing list
End of Xen-users Digest, Vol 108, Issue 7
*****************************************
