Re: [Xen-users] [Xen-devel] Successful Xen VGA Passthrough with Sapphire AMD Radeon HD 6450 Display Card

[Gordan Bobic <gordan@xxxxxxxxxx>]

IIRC, cross-posting to both users and devel lists is frowned upon, so 
I'm dropping the devel list in the reply.
AFAIK, there is no automatic bridge creation - you need to do this 
yourself in whatever way your distro handles it.
On 09/04/2014 06:36 AM, Teo En Ming wrote:
> Hi,
>
> By the way, there's another problem. Xen 4.4.1 does not create a network
> bridge. The command "sudo brctl show" shows up nothing. Please teach me
> how to create a network bridge in Xen 4.4.1.
>
> Thank you very much.
>
> Yours sincerely,
>
> Teo En Ming
> Singapore
>
>
> On Thu, Sep 4, 2014 at 1:29 PM, Teo En Ming
> <singapore.mr.teo.en.ming@xxxxxxxxx
> <mailto:singapore.mr.teo.en.ming@xxxxxxxxx>> wrote:
>
>     Hi,
>
>     I would like to report successful Xen VGA Passthrough with Sapphire
>     AMD Radeon HD 6450 display card.
>
>     Details are as follows:
>
>     Host operating system dom0: Ubuntu 14.04 LTS
>     Linux kernel: self-compiled 3.16.1
>     Xen hypervisor: self-compiled 4.4.1
>     Guest operating system domU: Windows 7 Ultimate HVM domU
>     Sapphire AMD Radeon HD 6450 Driver DVD: INSTALLED
>
>     Please refer to the attached file amd.txt for installation details.
>     I will write a more detailed installation guide later on. Stay tuned.
>
>     Also please refer to attached screenshot showing that AMD RADEON HD
>     6450 in Display Manager DOES NOT have error code 43. There is NO
>     yellow exclamation mark beside the AMD Radeon HD 6450 in Display
>     Manager. Xen VGA Passthrough is fully successful.
>
>     Screenshot URL:
>
>     http://i.imgur.com/y2tsNsH.jpg
>
>     I would like to report that Xen VGA Passthrough with Windows 8 HVM
>     domU is NOT successful. Although Windows 8 HVM domU can boot up
>     successfully initially with successful VGA passthrough, it
>     SUBSEQUENTLY keeps rebooting forever whenever I tried to start
>     Windows 8 HVM domU.
>
>     Currently I have a problem. Although I passed through the USB
>     controllers, the USB keyboard and USB mouse is not working. I need
>     to open a VNC Viewer to Windows 7 HVM domU and control the USB mouse
>     from within the VNC Viewer. This is not ideal. Please help me with
>     this problem so that I can use the USB mouse and USB keyboard
>     directly within Windows 7 HVM domU.
>
>     Thank you very much.
>
>     Yours sincerely,
>
>     Teo En Ming
>
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users