[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc6+ (bpaterni@hafx) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sun Feb 1 21:36:38 CST 2015 [ 0.000000] Command line: placeholder root=/dev/mapper/hafx-root ro console=tty console=hvc0 console=ttyS0,115200n8 earlyprintk=serial,ttyS0,115200,keep [ 0.000000] tseg: 009d800000 [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000009a762fff] usable [ 0.000000] Xen: [mem 0x000000009a763000-0x000000009ab96fff] reserved [ 0.000000] Xen: [mem 0x000000009ab97000-0x000000009aba6fff] ACPI data [ 0.000000] Xen: [mem 0x000000009aba7000-0x000000009b9aefff] ACPI NVS [ 0.000000] Xen: [mem 0x000000009b9af000-0x000000009c9ddfff] reserved [ 0.000000] Xen: [mem 0x000000009c9de000-0x000000009ca33fff] type 20 [ 0.000000] Xen: [mem 0x000000009ca34000-0x000000009ca34fff] usable [ 0.000000] Xen: [mem 0x000000009ca35000-0x000000009cc3afff] ACPI NVS [ 0.000000] Xen: [mem 0x000000009cc3b000-0x000000009d082fff] usable [ 0.000000] Xen: [mem 0x000000009d083000-0x000000009d7f3fff] reserved [ 0.000000] Xen: [mem 0x000000009d7f4000-0x000000009d7fffff] usable [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb20000-0x00000000feb23fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] Xen: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100001000-0x000000045effffff] usable [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] console [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2501 04/08/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x9d800 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3e3c00000-0x3e3dfffff] [ 0.000000] [mem 0x3e3c00000-0x3e3dfffff] page 4k [ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE [ 0.000000] BRK [0x01b0f000, 0x01b0ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3e3bfffff] [ 0.000000] [mem 0x3e0000000-0x3e3bfffff] page 4k [ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE [ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE [ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE [ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3c0000000-0x3dfffffff] [ 0.000000] [mem 0x3c0000000-0x3dfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9a762fff] [ 0.000000] [mem 0x00100000-0x9a762fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9ca34000-0x9ca34fff] [ 0.000000] [mem 0x9ca34000-0x9ca34fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9cc3b000-0x9d082fff] [ 0.000000] [mem 0x9cc3b000-0x9d082fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9d7f4000-0x9d7fffff] [ 0.000000] [mem 0x9d7f4000-0x9d7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100001000-0x3bfffffff] [ 0.000000] [mem 0x100001000-0x3bfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3e3e00000-0x45effffff] [ 0.000000] [mem 0x3e3e00000-0x45effffff] page 4k [ 0.000000] RAMDISK: [mem 0x04000000-0x04fe7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FD570 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000009AB9E070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009ABA5110 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649) [ 0.000000] ACPI: DSDT 0x000000009AB9E168 006FA8 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000009B9A9F80 000040 [ 0.000000] ACPI: APIC 0x000000009ABA5220 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000009ABA52C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000009ABA5308 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x000000009ABA5348 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: IVRS 0x000000009ABA6AF0 000100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 0x000000009ABA53D8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3e3f8c000-0x3e3f8ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x45effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x9a762fff] [ 0.000000] node 0: [mem 0x9ca34000-0x9ca34fff] [ 0.000000] node 0: [mem 0x9cc3b000-0x9d082fff] [ 0.000000] node 0: [mem 0x9d7f4000-0x9d7fffff] [ 0.000000] node 0: [mem 0x100001000-0x45effffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45effffff] [ 0.000000] On node 0 totalpages: 4168534 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9839 pages used for memmap [ 0.000000] DMA32 zone: 629688 pages, LIFO batch:31 [ 0.000000] Normal zone: 55232 pages used for memmap [ 0.000000] Normal zone: 3534847 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 2400000 [ 0.000000] Remapped 414889 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9a763000-0x9ab96fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ab97000-0x9aba6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aba7000-0x9b9aefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b9af000-0x9c9ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c9de000-0x9ca33fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9ca35000-0x9cc3afff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d083000-0x9d7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeb1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb20000-0xfeb23fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb24000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0x9d800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.6-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880449200000 s87296 r8192 d31488 u262144 [ 0.000000] pcpu-alloc: s87296 r8192 d31488 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4103378 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=/dev/mapper/hafx-root ro console=tty console=hvc0 console=ttyS0,115200n8 earlyprintk=serial,ttyS0,115200,keep [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] software IO TLB [mem 0x445200000-0x449200000] (64MB) mapped at [ffff880445200000-ffff8804491fffff] [ 0.000000] Memory: 15894920K/16674136K available (5462K kernel code, 1026K rwdata, 1856K rodata, 1236K init, 832K bss, 779216K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:1032 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 4013.584 MHz processor [ 5.111176] Calibrating delay loop (skipped), value calculated using timer frequency.. 8027.16 BogoMIPS (lpj=16054336) [ 5.111389] pid_max: default: 32768 minimum: 301 [ 5.111486] ACPI: Core revision 20141107 [ 5.116808] ACPI: All ACPI Tables successfully acquired [ 5.390364] Security Framework initialized [ 5.390455] AppArmor: AppArmor disabled by boot time parameter [ 5.390569] Yama: becoming mindful. [ 5.393068] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 5.397875] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 5.399803] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 5.399980] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 5.400411] Initializing cgroup subsys memory [ 5.400503] Initializing cgroup subsys devices [ 5.400593] Initializing cgroup subsys freezer [ 5.400682] Initializing cgroup subsys net_cls [ 5.400773] Initializing cgroup subsys blkio [ 5.400860] Initializing cgroup subsys perf_event [ 5.400956] Initializing cgroup subsys net_prio [ 5.401135] CPU: Physical Processor ID: 0 [ 5.401216] CPU: Processor Core ID: 0 [ 5.401291] mce: CPU supports 2 MCE banks [ 5.401382] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 5.401677] Freeing SMP alternatives memory: 20K (ffffffff81a37000 - ffffffff81a3c000) [ 5.402613] ftrace: allocating 22174 entries in 87 pages [ 5.408576] Performance Events: Fam15h core perfctr, Broken PMU hardware detected, using software events only. [ 5.408796] Failed to access perfctr msr (MSR c0010201 is 0) [ 5.409355] NMI watchdog: disabled (cpu0): hardware events not enabled [ 5.409613] installing Xen timer for CPU 1 [ 5.410011] installing Xen timer for CPU 2 [ 5.410358] installing Xen timer for CPU 3 [ 5.410670] installing Xen timer for CPU 4 [ 5.411059] installing Xen timer for CPU 5 [ 5.411379] installing Xen timer for CPU 6 [ 5.411733] installing Xen timer for CPU 7 [ 5.411957] x86: Booted up 1 node, 8 CPUs [ 5.412326] devtmpfs: initialized [ 5.416718] PM: Registering ACPI NVS region [mem 0x9aba7000-0x9b9aefff] (14712832 bytes) [ 5.417179] PM: Registering ACPI NVS region [mem 0x9ca35000-0x9cc3afff] (2121728 bytes) [ 5.417612] pinctrl core: initialized pinctrl subsystem [ 5.417908] NET: Registered protocol family 16 [ 5.418007] xen:grant_table: Grant tables using version 1 layout [ 5.418132] Grant table initialized [ 5.418515] ACPI: bus type PCI registered [ 5.418597] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.418985] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 5.419203] PCI: not using MMCONFIG [ 5.419273] PCI: Using configuration type 1 for base access [ 5.419383] PCI: Using configuration type 1 for extended access [ 5.433276] ACPI: Added _OSI(Module Device) [ 5.433368] ACPI: Added _OSI(Processor Device) [ 5.433459] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.433555] ACPI: Added _OSI(Processor Aggregator Device) [ 5.434478] xen: registering gsi 9 triggering 0 polarity 1 [ 5.435319] ACPI: Executed 2 blocks of module-level executable AML code [ 5.440693] ACPI: Interpreter enabled [ 5.440775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 5.440968] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 5.441172] ACPI: (supports S0 S3 S4 S5) [ 5.441254] ACPI: Using IOAPIC for interrupt routing [ 5.441574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 5.441811] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 5.474713] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.482411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 5.482542] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 5.482710] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 5.483470] PCI host bridge to bus 0000:00 [ 5.483556] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.483668] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 5.483794] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 5.483921] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 5.484048] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 5.484178] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 5.484321] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 5.484461] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xffffffff] [ 5.484624] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 5.484861] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 5.485065] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 5.485163] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 5.485226] pci 0000:00:02.0: System wakeup disabled by ACPI [ 5.485396] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 5.485493] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 5.485555] pci 0000:00:04.0: System wakeup disabled by ACPI [ 5.485759] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 5.485856] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 5.485918] pci 0000:00:05.0: System wakeup disabled by ACPI [ 5.486096] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 5.486193] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 5.486255] pci 0000:00:09.0: System wakeup disabled by ACPI [ 5.486423] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 5.486519] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 5.486582] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 5.486749] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400 [ 5.486846] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 5.486907] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 5.487080] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 [ 5.487182] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 5.487244] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 5.487420] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 5.487447] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 5.487460] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 5.487473] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 5.487486] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 5.487499] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 5.487513] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 5.487671] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 5.487690] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 5.487817] pci 0000:00:12.0: System wakeup disabled by ACPI [ 5.487992] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 5.488018] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 5.488142] pci 0000:00:12.2: supports D1 D2 [ 5.488144] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 5.488232] pci 0000:00:12.2: System wakeup disabled by ACPI [ 5.488405] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 5.488424] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 5.488558] pci 0000:00:13.0: System wakeup disabled by ACPI [ 5.488731] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 5.488758] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 5.488879] pci 0000:00:13.2: supports D1 D2 [ 5.488881] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 5.488939] pci 0000:00:13.2: System wakeup disabled by ACPI [ 5.489110] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 5.489298] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 5.489328] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 5.489454] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 5.489507] pci 0000:00:14.2: System wakeup disabled by ACPI [ 5.489672] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 5.489882] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 5.489977] pci 0000:00:14.4: System wakeup disabled by ACPI [ 5.490149] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 5.490167] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 5.490295] pci 0000:00:14.5: System wakeup disabled by ACPI [ 5.490472] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 5.490622] pci 0000:00:15.0: supports D1 D2 [ 5.490686] pci 0000:00:15.0: System wakeup disabled by ACPI [ 5.490856] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 5.490976] pci 0000:00:15.1: supports D1 D2 [ 5.491038] pci 0000:00:15.1: System wakeup disabled by ACPI [ 5.491213] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400 [ 5.491340] pci 0000:00:15.2: supports D1 D2 [ 5.491403] pci 0000:00:15.2: System wakeup disabled by ACPI [ 5.491573] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 [ 5.491693] pci 0000:00:15.3: supports D1 D2 [ 5.491756] pci 0000:00:15.3: System wakeup disabled by ACPI [ 5.491925] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 5.491943] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 5.492071] pci 0000:00:16.0: System wakeup disabled by ACPI [ 5.492246] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 5.492273] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 5.492395] pci 0000:00:16.2: supports D1 D2 [ 5.492397] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 5.492454] pci 0000:00:16.2: System wakeup disabled by ACPI [ 5.492631] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 5.492767] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 5.492885] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 5.493005] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 5.493146] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 5.493263] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 5.493653] pci 0000:01:00.0: [1002:6939] type 00 class 0x030000 [ 5.493677] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 5.493695] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 5.493708] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 5.493719] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] [ 5.493731] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 5.493818] pci 0000:01:00.0: supports D1 D2 [ 5.493819] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 5.493925] pci 0000:01:00.1: [1002:aad8] type 00 class 0x040300 [ 5.493945] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 5.494067] pci 0000:01:00.1: supports D1 D2 [ 5.502187] pci 0000:00:02.0: PCI bridge to [bus 01] [ 5.502296] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 5.502300] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 5.502306] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.502575] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601 [ 5.502597] pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057] [ 5.502610] pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043] [ 5.502623] pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037] [ 5.502636] pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023] [ 5.502649] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f] [ 5.502663] pci 0000:02:00.0: reg 0x24: [mem 0xfe900000-0xfe9001ff] [ 5.510227] pci 0000:00:04.0: PCI bridge to [bus 02] [ 5.510336] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 5.510340] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 5.510447] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 [ 5.510467] pci 0000:03:00.0: reg 0x10: [io 0xc050-0xc057] [ 5.510480] pci 0000:03:00.0: reg 0x14: [io 0xc040-0xc043] [ 5.510494] pci 0000:03:00.0: reg 0x18: [io 0xc030-0xc037] [ 5.510507] pci 0000:03:00.0: reg 0x1c: [io 0xc020-0xc023] [ 5.510520] pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc01f] [ 5.510533] pci 0000:03:00.0: reg 0x24: [mem 0xfe800000-0xfe8001ff] [ 5.518292] pci 0000:00:05.0: PCI bridge to [bus 03] [ 5.518400] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 5.518404] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 5.518544] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330 [ 5.518575] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] [ 5.518730] pci 0000:04:00.0: PME# supported from D3cold [ 5.526337] pci 0000:00:09.0: PCI bridge to [bus 04] [ 5.526448] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 5.526722] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 [ 5.526752] pci 0000:05:00.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit] [ 5.526772] pci 0000:05:00.0: reg 0x18: [mem 0xfdc00000-0xfdffffff 64bit] [ 5.526902] pci 0000:05:00.0: supports D1 D2 [ 5.526904] pci 0000:05:00.0: PME# supported from D0 D1 D2 [ 5.534358] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 5.534469] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfe3fffff] [ 5.534738] pci 0000:06:00.0: [1002:6939] type 00 class 0x030000 [ 5.534760] pci 0000:06:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 5.534775] pci 0000:06:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref] [ 5.534784] pci 0000:06:00.0: reg 0x20: [io 0xb000-0xb0ff] [ 5.534793] pci 0000:06:00.0: reg 0x24: [mem 0xfe600000-0xfe63ffff] [ 5.534802] pci 0000:06:00.0: reg 0x30: [mem 0xfe640000-0xfe65ffff pref] [ 5.534888] pci 0000:06:00.0: supports D1 D2 [ 5.534890] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 5.534998] pci 0000:06:00.1: [1002:aad8] type 00 class 0x040300 [ 5.535019] pci 0000:06:00.1: reg 0x10: [mem 0xfe660000-0xfe663fff 64bit] [ 5.535133] pci 0000:06:00.1: supports D1 D2 [ 5.542441] pci 0000:00:0b.0: PCI bridge to [bus 06] [ 5.542570] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 5.542574] pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 5.542581] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 5.542828] pci 0000:00:0d.0: PCI bridge to [bus 07] [ 5.543039] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode) [ 5.543186] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 5.543188] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 5.543190] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 5.543192] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.543193] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.543195] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 5.543196] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xffffffff] (subtractive decode) [ 5.543449] pci 0000:00:15.0: PCI bridge to [bus 09] [ 5.543678] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 5.543705] pci 0000:0a:00.0: reg 0x10: [io 0xa000-0xa0ff] [ 5.543745] pci 0000:0a:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref] [ 5.543770] pci 0000:0a:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref] [ 5.543897] pci 0000:0a:00.0: supports D1 D2 [ 5.543898] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.544052] pci 0000:00:15.1: PCI bridge to [bus 0a] [ 5.544160] pci 0000:00:15.1: bridge window [io 0xa000-0xafff] [ 5.544170] pci 0000:00:15.1: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 5.544290] pci 0000:0b:00.0: [1b21:1142] type 00 class 0x0c0330 [ 5.544328] pci 0000:0b:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit] [ 5.544510] pci 0000:0b:00.0: PME# supported from D3cold [ 5.550483] pci 0000:00:15.2: PCI bridge to [bus 0b] [ 5.550596] pci 0000:00:15.2: bridge window [mem 0xfe500000-0xfe5fffff] [ 5.550728] pci 0000:0c:00.0: [1b21:1142] type 00 class 0x0c0330 [ 5.550764] pci 0000:0c:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit] [ 5.550953] pci 0000:0c:00.0: PME# supported from D3cold [ 5.558565] pci 0000:00:15.3: PCI bridge to [bus 0c] [ 5.558678] pci 0000:00:15.3: bridge window [mem 0xfe400000-0xfe4fffff] [ 5.558828] pci_bus 0000:00: on NUMA node 0 [ 5.558953] xen: registering gsi 13 triggering 1 polarity 0 [ 5.559254] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 5.559500] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 5.559754] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 5.560003] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 [ 5.560241] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 5.560455] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 5.560693] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 5.560903] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 5.561185] ACPI: Enabled 1 GPEs in block 00 to 1F [ 5.561308] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 5.561482] xen:balloon: Initialising balloon driver [ 5.562554] xen_balloon: Initialising balloon driver [ 5.562758] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 5.562873] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 5.563041] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none [ 5.563201] vgaarb: loaded [ 5.563258] vgaarb: bridge control possible 0000:06:00.0 [ 5.563366] vgaarb: bridge control possible 0000:01:00.0 [ 5.563604] PCI: Using ACPI for IRQ routing [ 5.576570] PCI: pci_cache_line_size set to 64 bytes [ 5.576715] e820: reserve RAM buffer [mem 0x9a763000-0x9bffffff] [ 5.576717] e820: reserve RAM buffer [mem 0x9ca35000-0x9fffffff] [ 5.576719] e820: reserve RAM buffer [mem 0x9d083000-0x9fffffff] [ 5.576720] e820: reserve RAM buffer [mem 0x9d800000-0x9fffffff] [ 5.576721] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff] [ 5.576936] Switched to clocksource xen [ 5.583040] pnp: PnP ACPI init [ 5.583236] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 5.583372] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.583795] system 00:01: [io 0x040b] has been reserved [ 5.583904] system 00:01: [io 0x04d6] has been reserved [ 5.584014] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 5.584136] system 00:01: [io 0x0c14] has been reserved [ 5.584245] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 5.584367] system 00:01: [io 0x0c52] has been reserved [ 5.584477] system 00:01: [io 0x0c6c] has been reserved [ 5.584587] system 00:01: [io 0x0c6f] has been reserved [ 5.584697] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 5.584819] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 5.584950] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 5.585071] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 5.585193] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 5.585313] system 00:01: [io 0x0800-0x089f] could not be reserved [ 5.585441] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 5.585563] system 00:01: [io 0x0900-0x090f] has been reserved [ 5.585683] system 00:01: [io 0x0910-0x091f] has been reserved [ 5.585804] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 5.585925] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 5.586067] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 5.586201] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 5.586336] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 5.586471] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 5.586605] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 5.586747] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 5.586881] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.587082] system 00:02: [io 0x0290-0x02af] has been reserved [ 5.587205] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.587220] xen: registering gsi 8 triggering 1 polarity 0 [ 5.587249] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.587321] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 5.587443] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.587489] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.587730] xen: registering gsi 4 triggering 1 polarity 0 [ 5.587732] Already setup the GSI :4 [ 5.587807] pnp 00:06: [dma 0 disabled] [ 5.587844] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.588030] system 00:07: [mem 0xfeb20000-0xfeb23fff] has been reserved [ 5.588165] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.588331] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved [ 5.588473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.588644] pnp: PnP ACPI: found 9 devices [ 5.595857] PM-Timer failed consistency check (0xffffff) - aborting. [ 5.596089] pci 0000:00:02.0: PCI bridge to [bus 01] [ 5.596193] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 5.596321] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 5.596461] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.596649] pci 0000:00:04.0: PCI bridge to [bus 02] [ 5.596753] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 5.596881] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 5.597032] pci 0000:00:05.0: PCI bridge to [bus 03] [ 5.597135] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 5.597262] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 5.597406] pci 0000:00:09.0: PCI bridge to [bus 04] [ 5.597512] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 5.597657] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 5.597763] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfe3fffff] [ 5.597909] pci 0000:00:0b.0: PCI bridge to [bus 06] [ 5.598029] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 5.598157] pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 5.598298] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xb01fffff 64bit pref] [ 5.598461] pci 0000:00:0d.0: PCI bridge to [bus 07] [ 5.598572] pci 0000:00:14.4: PCI bridge to [bus 08] [ 5.598691] pci 0000:00:15.0: PCI bridge to [bus 09] [ 5.598805] pci 0000:00:15.1: PCI bridge to [bus 0a] [ 5.598908] pci 0000:00:15.1: bridge window [io 0xa000-0xafff] [ 5.599039] pci 0000:00:15.1: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 5.599201] pci 0000:00:15.2: PCI bridge to [bus 0b] [ 5.599308] pci 0000:00:15.2: bridge window [mem 0xfe500000-0xfe5fffff] [ 5.599647] pci 0000:00:15.3: PCI bridge to [bus 0c] [ 5.599754] pci 0000:00:15.3: bridge window [mem 0xfe400000-0xfe4fffff] [ 5.599901] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 5.599903] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 5.599905] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 5.599906] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 5.599908] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 5.599909] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 5.599911] pci_bus 0000:00: resource 10 [mem 0xa0000000-0xffffffff] [ 5.599913] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 5.599914] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 5.599916] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 5.599917] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 5.599919] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 5.599920] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 5.599922] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 5.599923] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 5.599925] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfe3fffff] [ 5.599927] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 5.599928] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 5.599929] pci_bus 0000:06: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref] [ 5.599931] pci_bus 0000:08: resource 4 [io 0x0000-0x03af] [ 5.599933] pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7] [ 5.599934] pci_bus 0000:08: resource 6 [io 0x03b0-0x03df] [ 5.599936] pci_bus 0000:08: resource 7 [io 0x0d00-0xffff] [ 5.599937] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff] [ 5.599939] pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff] [ 5.599940] pci_bus 0000:08: resource 10 [mem 0xa0000000-0xffffffff] [ 5.599942] pci_bus 0000:0a: resource 0 [io 0xa000-0xafff] [ 5.599943] pci_bus 0000:0a: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 5.599945] pci_bus 0000:0b: resource 1 [mem 0xfe500000-0xfe5fffff] [ 5.599947] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe4fffff] [ 5.600039] NET: Registered protocol family 2 [ 5.600507] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 5.601026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 5.601354] TCP: Hash tables configured (established 131072 bind 65536) [ 5.601515] TCP: reno registered [ 5.601623] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 5.601836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 5.602099] NET: Registered protocol family 1 [ 5.602288] xen: registering gsi 18 triggering 0 polarity 1 [ 5.602301] xen: --> pirq=18 -> irq=18 (gsi=18) [ 5.677086] xen: registering gsi 17 triggering 0 polarity 1 [ 5.677095] xen: --> pirq=17 -> irq=17 (gsi=17) [ 5.677235] xen: registering gsi 20 triggering 0 polarity 1 [ 5.677242] xen: --> pirq=20 -> irq=20 (gsi=20) [ 5.749117] xen: registering gsi 21 triggering 0 polarity 1 [ 5.749127] xen: --> pirq=21 -> irq=21 (gsi=21) [ 5.749311] xen: registering gsi 18 triggering 0 polarity 1 [ 5.749313] Already setup the GSI :18 [ 5.821083] xen: registering gsi 22 triggering 0 polarity 1 [ 5.821091] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.893120] xen: registering gsi 23 triggering 0 polarity 1 [ 5.893129] xen: --> pirq=23 -> irq=23 (gsi=23) [ 5.893239] pci 0000:01:00.0: Video device with shadowed ROM [ 5.893306] xen: registering gsi 53 triggering 0 polarity 1 [ 5.893311] xen: --> pirq=53 -> irq=53 (gsi=53) [ 5.893343] xen: registering gsi 48 triggering 0 polarity 1 [ 5.893347] xen: --> pirq=48 -> irq=48 (gsi=48) [ 5.893476] xen: registering gsi 20 triggering 0 polarity 1 [ 5.893478] Already setup the GSI :20 [ 5.893579] xen: registering gsi 22 triggering 0 polarity 1 [ 5.893581] Already setup the GSI :22 [ 5.893793] xen: registering gsi 20 triggering 0 polarity 1 [ 5.893795] Already setup the GSI :20 [ 5.893894] xen: registering gsi 23 triggering 0 polarity 1 [ 5.893895] Already setup the GSI :23 [ 5.894024] PCI: CLS 64 bytes, default 64 [ 5.894066] Unpacking initramfs... [ 6.120882] Freeing initrd memory: 16288K (ffff880004000000 - ffff880004fe8000) [ 6.121981] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 6.122190] audit: initializing netlink subsys (disabled) [ 6.122314] audit: type=2000 audit(1422899586.741:1): initialized [ 6.122735] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.122898] zpool: loaded [ 6.122954] zbud: loaded [ 6.123129] VFS: Disk quotas dquot_6.5.2 [ 6.123303] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.123992] alg: No test for stdrng (krng) [ 6.124131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.124388] io scheduler noop registered [ 6.124481] io scheduler deadline registered [ 6.124606] io scheduler cfq registered (default) [ 6.124890] xen: registering gsi 52 triggering 0 polarity 1 [ 6.124904] xen: --> pirq=52 -> irq=52 (gsi=52) [ 6.125033] xen: registering gsi 52 triggering 0 polarity 1 [ 6.125036] Already setup the GSI :52 [ 6.125223] xen: registering gsi 52 triggering 0 polarity 1 [ 6.125225] Already setup the GSI :52 [ 6.125454] xen: registering gsi 54 triggering 0 polarity 1 [ 6.125459] xen: --> pirq=54 -> irq=54 (gsi=54) [ 6.125567] xen: registering gsi 54 triggering 0 polarity 1 [ 6.125569] Already setup the GSI :54 [ 6.125777] xen: registering gsi 54 triggering 0 polarity 1 [ 6.125779] Already setup the GSI :54 [ 6.125960] xen: registering gsi 20 triggering 0 polarity 1 [ 6.125962] Already setup the GSI :20 [ 6.126162] xen: registering gsi 20 triggering 0 polarity 1 [ 6.126164] Already setup the GSI :20 [ 6.126430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.126556] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.126734] GHES: HEST is not enabled! [ 6.127357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.127946] hpet_acpi_add: no address or irqs in _CRS [ 6.128058] Linux agpgart interface v0.103 [ 6.128626] AMD IOMMUv2 driver by Joerg Roedel [ 6.128756] AMD IOMMUv2 functionality not available on this system [ 6.128968] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 6.129618] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.129726] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.130003] mousedev: PS/2 mouse device common for all mice [ 6.130166] rtc_cmos 00:03: RTC can wake from S4 [ 6.130426] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 6.130580] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram [ 6.130726] ledtrig-cpu: registered to indicate activity on CPUs [ 6.131383] TCP: cubic registered [ 6.131549] NET: Registered protocol family 10 [ 6.131962] mip6: Mobile IPv6 [ 6.132026] NET: Registered protocol family 17 [ 6.132119] mpls_gso: MPLS GSO support [ 6.132621] registered taskstats version 1 [ 6.133787] rtc_cmos 00:03: setting system clock to 2015-02-02 17:53:06 UTC (1422899586) [ 6.134029] PM: Hibernation image not present or could not be loaded. [ 6.134613] Freeing unused kernel memory: 1236K (ffffffff81902000 - ffffffff81a37000) [ 6.134770] Write protecting the kernel read-only data: 8192k [ 6.137602] Freeing unused kernel memory: 672K (ffff880001558000 - ffff880001600000) [ 6.137869] Freeing unused kernel memory: 192K (ffff8800017d0000 - ffff880001800000) [ 6.160432] systemd-udevd[101]: starting version 215 [ 6.160602] systemd-udevd[101]: hwdb.bin does not exist, please run udevadm hwdb --update [ 6.161307] random: systemd-udevd urandom read with 25 bits of entropy available [ 6.188202] SCSI subsystem initialized [ 6.189872] libata version 3.00 loaded. [ 6.191108] ACPI: bus type USB registered [ 6.191265] usbcore: registered new interface driver usbfs [ 6.191341] ahci 0000:00:11.0: version 3.0 [ 6.191428] usbcore: registered new interface driver hub [ 6.191438] xen: registering gsi 19 triggering 0 polarity 1 [ 6.191454] xen: --> pirq=19 -> irq=19 (gsi=19) [ 6.191577] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0x17 impl SATA mode [ 6.191579] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 6.192177] usbcore: registered new device driver usb [ 6.192252] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.192261] r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.192309] xen: registering gsi 21 triggering 0 polarity 1 [ 6.192313] Already setup the GSI :21 [ 6.193188] r8169 0000:0a:00.0 eth0: RTL8168f/8111f at 0xffffc90003ca8000, 40:16:7e:29:64:b2, XID 08000800 IRQ 107 [ 6.193457] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.193847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.193872] scsi host0: ahci [ 6.194216] scsi host1: ahci [ 6.194591] scsi host2: ahci [ 6.194617] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.194947] ehci-pci: EHCI PCI platform driver [ 6.195010] scsi host3: ahci [ 6.195531] scsi host4: ahci [ 6.195716] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 6.195940] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 6.196118] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 6.196271] ata4: DUMMY [ 6.196323] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 [ 6.196607] xen: registering gsi 17 triggering 0 polarity 1 [ 6.196611] Already setup the GSI :17 [ 6.196632] xen: registering gsi 44 triggering 0 polarity 1 [ 6.196643] xen: --> pirq=44 -> irq=44 (gsi=44) [ 6.196728] QUIRK: Enable AMD PLL fix [ 6.196785] ehci-pci 0000:00:12.2: EHCI Host Controller [ 6.196792] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled [ 6.196820] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 6.196822] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 6.197397] scsi host5: ahci [ 6.197584] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 6.197616] scsi host6: ahci [ 6.197719] ata6: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 108 [ 6.197721] ata7: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 108 [ 6.197795] xen: registering gsi 46 triggering 0 polarity 1 [ 6.197805] xen: --> pirq=46 -> irq=46 (gsi=46) [ 6.197898] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled [ 6.197927] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 6.197929] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 6.198800] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 6.198833] scsi host7: ahci [ 6.198992] scsi host8: ahci [ 6.199077] ata8: SATA max UDMA/133 abar m512@0xfe800000 port 0xfe800100 irq 109 [ 6.199081] ata9: SATA max UDMA/133 abar m512@0xfe800000 port 0xfe800180 irq 109 [ 6.199553] ehci-pci 0000:00:12.2: debug port 1 [ 6.199783] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 6.208955] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 6.209141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.209299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.209463] usb usb1: Product: EHCI Host Controller [ 6.209578] usb usb1: Manufacturer: Linux 3.19.0-rc6+ ehci_hcd [ 6.209701] usb usb1: SerialNumber: 0000:00:12.2 [ 6.209963] hub 1-0:1.0: USB hub found [ 6.210061] hub 1-0:1.0: 5 ports detected [ 6.210446] xen: registering gsi 21 triggering 0 polarity 1 [ 6.210450] Already setup the GSI :21 [ 6.210566] ehci-pci 0000:00:13.2: EHCI Host Controller [ 6.210693] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 6.210869] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 6.211081] ehci-pci 0000:00:13.2: debug port 1 [ 6.211243] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000 [ 6.221016] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 6.221195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.221333] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.221479] usb usb2: Product: EHCI Host Controller [ 6.221579] usb usb2: Manufacturer: Linux 3.19.0-rc6+ ehci_hcd [ 6.221730] usb usb2: SerialNumber: 0000:00:13.2 [ 6.221956] hub 2-0:1.0: USB hub found [ 6.222038] hub 2-0:1.0: 5 ports detected [ 6.222331] xen: registering gsi 23 triggering 0 polarity 1 [ 6.222334] Already setup the GSI :23 [ 6.222437] ehci-pci 0000:00:16.2: EHCI Host Controller [ 6.222545] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 6.222693] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 6.222878] ehci-pci 0000:00:16.2: debug port 1 [ 6.223050] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000 [ 6.232956] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 6.233113] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.233248] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.233391] usb usb3: Product: EHCI Host Controller [ 6.233488] usb usb3: Manufacturer: Linux 3.19.0-rc6+ ehci_hcd [ 6.233603] usb usb3: SerialNumber: 0000:00:16.2 [ 6.233821] hub 3-0:1.0: USB hub found [ 6.233903] hub 3-0:1.0: 4 ports detected [ 6.234650] ohci-pci: OHCI PCI platform driver [ 6.234876] xen: registering gsi 18 triggering 0 polarity 1 [ 6.234879] Already setup the GSI :18 [ 6.234994] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 6.235136] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 6.235369] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 6.293031] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.293173] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.293320] usb usb4: Product: OHCI PCI host controller [ 6.293426] usb usb4: Manufacturer: Linux 3.19.0-rc6+ ohci_hcd [ 6.293545] usb usb4: SerialNumber: 0000:00:12.0 [ 6.293775] hub 4-0:1.0: USB hub found [ 6.293862] hub 4-0:1.0: 5 ports detected [ 6.294148] xen: registering gsi 20 triggering 0 polarity 1 [ 6.294151] Already setup the GSI :20 [ 6.294248] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 6.294365] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 6.294583] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000 [ 6.353021] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.353161] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.353308] usb usb5: Product: OHCI PCI host controller [ 6.353414] usb usb5: Manufacturer: Linux 3.19.0-rc6+ ohci_hcd [ 6.353532] usb usb5: SerialNumber: 0000:00:13.0 [ 6.353759] hub 5-0:1.0: USB hub found [ 6.353846] hub 5-0:1.0: 5 ports detected [ 6.354125] xen: registering gsi 18 triggering 0 polarity 1 [ 6.354128] Already setup the GSI :18 [ 6.354224] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 6.354341] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 6.354534] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 6.413008] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.413184] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.413329] usb usb6: Product: OHCI PCI host controller [ 6.413433] usb usb6: Manufacturer: Linux 3.19.0-rc6+ ohci_hcd [ 6.413549] usb usb6: SerialNumber: 0000:00:14.5 [ 6.413774] hub 6-0:1.0: USB hub found [ 6.413859] hub 6-0:1.0: 2 ports detected [ 6.414128] xen: registering gsi 22 triggering 0 polarity 1 [ 6.414132] Already setup the GSI :22 [ 6.414230] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 6.414344] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 6.414589] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000 [ 6.473012] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.473150] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.473294] usb usb7: Product: OHCI PCI host controller [ 6.473399] usb usb7: Manufacturer: Linux 3.19.0-rc6+ ohci_hcd [ 6.473516] usb usb7: SerialNumber: 0000:00:16.0 [ 6.473737] hub 7-0:1.0: USB hub found [ 6.473822] hub 7-0:1.0: 4 ports detected [ 6.517005] ata8: SATA link down (SStatus 0 SControl 300) [ 6.517006] ata6: SATA link down (SStatus 0 SControl 300) [ 6.532988] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 6.666449] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610 [ 6.666585] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.666726] usb 2-3: Product: USB2.0 Hub [ 6.667869] hub 2-3:1.0: USB hub found [ 6.668329] hub 2-3:1.0: 4 ports detected [ 6.684967] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.685114] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.685995] ata3.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133 [ 6.686138] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.687114] ata1.00: supports DRM functions and may not be fully accessible [ 6.687330] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6.687331] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133 [ 6.687483] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 6.687636] ata3.00: configured for UDMA/133 [ 6.687905] ata1.00: supports DRM functions and may not be fully accessible [ 6.688100] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6.688102] ata1.00: configured for UDMA/133 [ 6.688325] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5 [ 6.688950] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.689106] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.689566] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 6.689874] ata2.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133 [ 6.689889] sd 0:0:0:0: [sda] Write Protect is off [ 6.689891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.689940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.690314] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.691165] ata5.00: supports DRM functions and may not be fully accessible [ 6.691388] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6.691390] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0CB6Q, max UDMA/133 [ 6.691551] ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 6.691578] sda: sda1 sda2 sda3 [ 6.691808] ata2.00: configured for UDMA/133 [ 6.691986] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5 [ 6.692135] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.692290] ata5.00: supports DRM functions and may not be fully accessible [ 6.692521] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 6.692525] ata5.00: configured for UDMA/133 [ 6.692534] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 6.692635] sd 1:0:0:0: [sdb] Write Protect is off [ 6.692637] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.692641] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 5 [ 6.692685] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.692901] sd 2:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 6.693016] sd 2:0:0:0: [sdc] Write Protect is off [ 6.693018] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.693070] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.693861] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5 [ 6.693903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.693960] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.694006] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.694726] sd 4:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 6.694856] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.695186] sd 4:0:0:0: [sdd] Write Protect is off [ 6.695303] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 6.695360] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.696127] sdd: sdd1 sdd2 < sdd5 > [ 6.696654] sd 4:0:0:0: [sdd] Attached SCSI disk [ 6.704660] sdb: sdb1 [ 6.705104] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.709065] sdc: sdc1 [ 6.709493] sd 2:0:0:0: [sdc] Attached SCSI disk [ 6.941326] usb 2-3.1: new low-speed USB device number 3 using ehci-pci [ 7.016986] ata7: SATA link down (SStatus 0 SControl 300) [ 7.038065] usb 2-3.1: New USB device found, idVendor=09eb, idProduct=0131 [ 7.038206] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.038351] usb 2-3.1: Product: USB [ 7.038422] usb 2-3.1: Manufacturer: Generic [ 7.042336] hidraw: raw HID events driver (C) Jiri Kosina [ 7.048884] usbcore: registered new interface driver usbhid [ 7.049013] usbhid: USB HID core driver [ 7.049850] input: Generic USB as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.0/0003:09EB:0131.0001/input/input2 [ 7.105059] hid-generic 0003:09EB:0131.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB] on usb-0000:00:13.2-3.1/input0 [ 7.105548] input: Generic USB as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.1/0003:09EB:0131.0002/input/input3 [ 7.161058] hid-generic 0003:09EB:0131.0002: input,hidraw1: USB HID v1.00 Mouse [Generic USB] on usb-0000:00:13.2-3.1/input1 [ 7.336952] ata9: SATA link down (SStatus 0 SControl 300) [ 7.364585] pciback 0000:04:00.0: seizing device [ 7.364697] pciback 0000:06:00.0: seizing device [ 7.364799] pciback 0000:06:00.1: seizing device [ 7.364969] pciback 0000:06:00.1: enabling device (0000 -> 0002) [ 7.365136] xen: registering gsi 33 triggering 0 polarity 1 [ 7.365150] xen: --> pirq=33 -> irq=33 (gsi=33) [ 7.365332] pciback 0000:06:00.0: enabling device (0000 -> 0003) [ 7.365475] xen: registering gsi 32 triggering 0 polarity 1 [ 7.365481] xen: --> pirq=32 -> irq=32 (gsi=32) [ 7.365706] xen: registering gsi 48 triggering 0 polarity 1 [ 7.365708] Already setup the GSI :48 [ 8.377213] xen_pciback: backend is passthrough [ 8.404746] device-mapper: uevent: version 1.0.3 [ 8.405013] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@xxxxxxxxxx [ 8.418247] random: nonblocking pool is initialized [ 8.490874] PM: Starting manual resume from disk [ 8.490985] PM: Hibernation image partition 254:1 present [ 8.490986] PM: Looking for hibernation image. [ 8.491166] PM: Image not found (code -22) [ 8.491168] PM: Hibernation image not present or could not be loaded. [ 8.538322] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8.698834] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 8.699153] systemd[1]: Detected virtualization 'xen'. [ 8.699261] systemd[1]: Detected architecture 'x86-64'. [ 8.708538] systemd[1]: Inserted module 'autofs4' [ 8.709169] systemd[1]: Set hostname to . [ 8.785184] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service' [ 8.785410] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service' [ 8.802939] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 8.803620] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.803841] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.804002] systemd[1]: Expecting device dev-hvc0.device... [ 8.804171] systemd[1]: Starting Remote File Systems (Pre). [ 8.804318] systemd[1]: Reached target Remote File Systems (Pre). [ 8.804462] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 8.804739] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.804959] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 8.805162] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.805329] systemd[1]: Expecting device dev-mapper-hafx\x2dswap_1.device... [ 8.805504] systemd[1]: Expecting device dev-disk-by\x2duuid-C7AD\x2dA59E.device... [ 8.805690] systemd[1]: Expecting device dev-disk-by\x2duuid-ea186801\x2da9f5\x2d4acc\x2da61a\x2d0ad8a5e478ab.device... [ 8.805938] systemd[1]: Starting Root Slice. [ 8.821048] systemd[1]: Created slice Root Slice. [ 8.821156] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 8.821354] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.821513] systemd[1]: Starting Delayed Shutdown Socket. [ 8.821674] systemd[1]: Listening on Delayed Shutdown Socket. [ 8.821800] systemd[1]: Starting Journal Socket (/dev/log). [ 8.821971] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.822100] systemd[1]: Starting Syslog Socket. [ 8.822242] systemd[1]: Listening on Syslog Socket. [ 8.822350] systemd[1]: Starting LVM2 metadata daemon socket. [ 8.822521] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.822653] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 8.823717] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.823866] systemd[1]: Starting udev Control Socket. [ 8.824020] systemd[1]: Listening on udev Control Socket. [ 8.824145] systemd[1]: Starting udev Kernel Socket. [ 8.824320] systemd[1]: Listening on udev Kernel Socket. [ 8.824436] systemd[1]: Starting User and Session Slice. [ 8.824776] systemd[1]: Created slice User and Session Slice. [ 8.824904] systemd[1]: Starting Journal Socket. [ 8.825108] systemd[1]: Listening on Journal Socket. [ 8.825226] systemd[1]: Starting System Slice. [ 8.825532] systemd[1]: Created slice System Slice. [ 8.825647] systemd[1]: Starting File System Check on Root Device... [ 8.826815] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 8.827220] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.828406] systemd[1]: Starting Load Kernel Modules... [ 8.829790] systemd[1]: Mounting POSIX Message Queue File System... [ 8.831674] systemd[1]: Started Set Up Additional Binary Formats. [ 8.831906] systemd[1]: Mounting Debug File System... [ 8.833363] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.835062] systemd[1]: Starting udev Coldplug all Devices... [ 8.836541] systemd[1]: Mounting Huge Pages File System... [ 8.837935] systemd[1]: Starting LSB: controls configuration of serial ports... [ 8.839800] systemd[1]: Starting system-getty.slice. [ 8.840363] systemd[1]: Created slice system-getty.slice. [ 8.840534] systemd[1]: Starting system-serial\x2dgetty.slice. [ 8.841199] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.841401] systemd[1]: Starting Journal Service... [ 8.843015] systemd[1]: Started Journal Service. [ 8.843740] lp: driver loaded but no devices found [ 8.847080] ppdev: user-space parallel port driver [ 8.848161] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA [ 8.848406] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA [ 8.848671] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA [ 8.853263] loop: module loaded [ 8.910769] systemd-udevd[269]: starting version 215 [ 9.026521] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 9.113881] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 9.114077] ACPI: Power Button [PWRB] [ 9.114256] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 9.114450] ACPI: Power Button [PWRF] [ 9.121232] wmi: Mapper loaded [ 9.121558] Warning: Processor Platform Limit not supported. [ 9.238292] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.241279] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 9.241521] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 9.243533] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 9.243763] sp5100_tco: PCI Revision ID: 0x42 [ 9.243915] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 9.244092] sp5100_tco: Last reboot was not triggered by watchdog. [ 9.244986] sp5100_tco: initialized (0xffffc90003caeb00). heartbeat=60 sec (nowayout=0) [ 9.245395] media: Linux media interface: v0.10 [ 9.248220] Linux video capture interface: v2.00 [ 9.248682] xen: registering gsi 22 triggering 0 polarity 1 [ 9.248691] Already setup the GSI :22 [ 9.248839] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 9.248987] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 8 [ 9.251552] EDAC MC: Ver: 3.0.0 [ 9.253344] MCE: In-kernel MCE decoding enabled. [ 9.254705] AMD64 EDAC driver v3.4.0 [ 9.254794] xen: registering gsi 16 triggering 0 polarity 1 [ 9.254812] xen: --> pirq=16 -> irq=16 (gsi=16) [ 9.255291] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 9.255550] xen: registering gsi 25 triggering 0 polarity 1 [ 9.255559] xen: --> pirq=25 -> irq=25 (gsi=25) [ 9.255578] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 9.256281] EDAC amd64: DRAM ECC disabled. [ 9.256406] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. [ 9.256596] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.304241] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 9.305512] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 9.310209] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.310353] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.310502] usb usb8: Product: xHCI Host Controller [ 9.310606] usb usb8: Manufacturer: Linux 3.19.0-rc6+ xhci-hcd [ 9.310725] usb usb8: SerialNumber: 0000:0b:00.0 [ 9.310961] hub 8-0:1.0: USB hub found [ 9.311050] hub 8-0:1.0: 2 ports detected [ 9.311263] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 9.311377] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 9 [ 9.311613] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.311752] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.311901] usb usb9: Product: xHCI Host Controller [ 9.312020] usb usb9: Manufacturer: Linux 3.19.0-rc6+ xhci-hcd [ 9.312140] usb usb9: SerialNumber: 0000:0b:00.0 [ 9.312364] hub 9-0:1.0: USB hub found [ 9.312450] hub 9-0:1.0: 2 ports detected [ 9.312687] xen: registering gsi 23 triggering 0 polarity 1 [ 9.312692] Already setup the GSI :23 [ 9.312806] xhci_hcd 0000:0c:00.0: xHCI Host Controller [ 9.312925] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 10 [ 9.374169] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.374320] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.374489] usb usb10: Product: xHCI Host Controller [ 9.374595] usb usb10: Manufacturer: Linux 3.19.0-rc6+ xhci-hcd [ 9.374716] usb usb10: SerialNumber: 0000:0c:00.0 [ 9.374953] hub 10-0:1.0: USB hub found [ 9.375044] hub 10-0:1.0: 2 ports detected [ 9.375240] xhci_hcd 0000:0c:00.0: xHCI Host Controller [ 9.375348] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 11 [ 9.375567] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.375704] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.375849] usb usb11: Product: xHCI Host Controller [ 9.375949] usb usb11: Manufacturer: Linux 3.19.0-rc6+ xhci-hcd [ 9.376068] usb usb11: SerialNumber: 0000:0c:00.0 [ 9.376263] hub 11-0:1.0: USB hub found [ 9.376350] hub 11-0:1.0: 2 ports detected [ 9.403968] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 9.408656] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 9.409335] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 9.409852] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 9.410276] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 9.410654] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 9.411016] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 9.413997] Adding 16674812k swap on /dev/mapper/hafx-swap_1. Priority:-1 extents:1 across:16674812k SSFS [ 9.432937] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 9.434573] Error: Driver 'pcspkr' is already registered, aborting... [ 9.435502] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 9.435580] saa7164 driver loaded [ 9.435645] saa7164 0000:05:00.0: enabling device (0000 -> 0002) [ 9.435696] xen: registering gsi 47 triggering 0 polarity 1 [ 9.435714] xen: --> pirq=47 -> irq=47 (gsi=47) [ 9.435741] saa7164[0]: Your board isn't known (yet) to the driver. saa7164[0]: Try to pick one of the existing card configs via saa7164[0]: card= insmod option. Updating to the latest saa7164[0]: version might help as well. [ 9.435748] saa7164[0]: Here are valid choices for the card= insmod option: [ 9.435749] saa7164[0]: card=0 -> Unknown [ 9.435749] saa7164[0]: card=1 -> Generic Rev2 [ 9.435750] saa7164[0]: card=2 -> Generic Rev3 [ 9.435751] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250 [ 9.435752] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200 [ 9.435753] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200 [ 9.435753] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200 [ 9.435754] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250 [ 9.435755] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250 [ 9.435755] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200 [ 9.435756] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200 [ 9.436988] asus_wmi: ASUS WMI generic driver loaded [ 9.437134] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown [card=0,autodetected] [ 9.437138] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, latency: 0, mmio: 0xfe000000 [ 9.437175] saa7164_initdev() Unsupported board detected, registering without firmware [ 9.438818] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.438986] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.439157] sound hdaudioC0D0: mono: mono_out=0x0 [ 9.439289] sound hdaudioC0D0: dig-out=0x11/0x1e [ 9.439418] sound hdaudioC0D0: inputs: [ 9.439522] sound hdaudioC0D0: Front Mic=0x19 [ 9.439632] sound hdaudioC0D0: Rear Mic=0x18 [ 9.439751] sound hdaudioC0D0: Line=0x1a [ 9.440363] asus_wmi: Initialization: 0x0 [ 9.440478] asus_wmi: BIOS WMI version: 0.9 [ 9.440646] asus_wmi: SFUN value: 0x0 [ 9.441286] AVX version of gcm_enc/dec engaged. [ 9.441430] AES CTR mode by8 optimization enabled [ 9.441433] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15 [ 9.442657] asus_wmi: Disabling ACPI video driver [ 9.445784] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 9.448229] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.456807] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 9.457182] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 9.457619] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 9.458160] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 9.458473] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 9.458790] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 9.459079] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 9.459336] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 9.485448] alg: No test for crc32 (crc32-pclmul) [ 10.065894] systemd-journald[252]: Received request to flush runtime journal from PID 1 [ 10.077220] ttyS0: LSR safety check engaged! [ 10.078867] ttyS0: LSR safety check engaged! [ 10.079995] ttyS0: LSR safety check engaged! [ 10.085764] ttyS0: LSR safety check engaged! [ 10.108145] ttyS0: LSR safety check engaged! [ 10.108413] ttyS0: LSR safety check engaged! [ 10.145634] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 10.151574] device eth0 entered promiscuous mode [ 10.218458] ttyS0: LSR safety check engaged! [ 10.259857] r8169 0000:0a:00.0 eth0: link down [ 10.259890] r8169 0000:0a:00.0 eth0: link down [ 10.262047] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 12.493441] r8169 0000:0a:00.0 eth0: link up [ 12.494026] xenbr0: port 1(eth0) entered forwarding state [ 12.494139] xenbr0: port 1(eth0) entered forwarding state [ 12.494262] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 12.806900] ttyS0: LSR safety check engaged! [ 12.807234] ttyS0: LSR safety check engaged! [ 12.807380] ttyS0: LSR safety check engaged! [ 12.892619] RPC: Registered named UNIX socket transport module. [ 12.892755] RPC: Registered udp transport module. [ 12.892872] RPC: Registered tcp transport module. [ 12.892991] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.897447] FS-Cache: Loaded [ 12.903780] FS-Cache: Netfs 'nfs' registered for caching [ 12.911729] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 12.990800] xen:xen_evtchn: Event-channel device installed [ 13.048455] xen_acpi_processor: Uploading Xen processor PM info [ 13.632463] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.782782] serial8250_do_startup: 67 callbacks suppressed [ 15.783129] ttyS0: LSR safety check engaged! [ 15.784243] ttyS0: LSR safety check engaged! [ 15.895538] ttyS0: LSR safety check engaged! [ 15.896670] ttyS0: LSR safety check engaged! [ 15.897212] ttyS0: LSR safety check engaged! [ 15.897731] ttyS0: LSR safety check engaged! [ 15.951761] ttyS0: LSR safety check engaged! [ 27.501004] xenbr0: port 1(eth0) entered forwarding state [ 481.160570] tun: Universal TUN/TAP device driver, 1.6 [ 481.160737] tun: (C) 1999-2004 Max Krasnyansky [ 481.357246] device vif1.0 entered promiscuous mode [ 481.363211] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 481.408775] Bridge firewalling registered [ 481.613822] device vif1.0-emu entered promiscuous mode [ 481.619486] xenbr0: port 3(vif1.0-emu) entered forwarding state [ 481.619874] xenbr0: port 3(vif1.0-emu) entered forwarding state [ 491.708685] xenbr0: port 3(vif1.0-emu) entered disabled state [ 491.709815] device vif1.0-emu left promiscuous mode [ 491.710157] xenbr0: port 3(vif1.0-emu) entered disabled state [ 491.732611] xenbr0: port 2(vif1.0) entered disabled state [ 491.733316] device vif1.0 left promiscuous mode [ 491.733603] xenbr0: port 2(vif1.0) entered disabled state