[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.3-4.pvops.qubes.x86_64 (user@devel18) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) ) #1 SMP Thu Apr 2 00:44:39 UTC 2015 [ 0.000000] Command line: placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-878dd9b7-fc12-4283-8802-999f47aab5ab rd.lvm.lv=qubes_dom0/root vconsole.font=latarcyrheb-sun16 rd.lvm.lv=qubes_dom0/swap modprobe xen-pciback hide=(09:00.0)(09:00.0) permissive=1 rhgb quiet [ 0.000000] tseg: 0000000000 [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000aff8ffff] usable [ 0.000000] Xen: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data [ 0.000000] Xen: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000affe0000-0x00000000afffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000044fffffff] usable [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.15 10/31/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x450000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xaff90 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3ec400000-0x3ec5fffff] [ 0.000000] [mem 0x3ec400000-0x3ec5fffff] page 4k [ 0.000000] BRK [0x02002000, 0x02002fff] PGTABLE [ 0.000000] BRK [0x02003000, 0x02003fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ec3fffff] [ 0.000000] [mem 0x3e0000000-0x3ec3fffff] page 4k [ 0.000000] BRK [0x02004000, 0x02004fff] PGTABLE [ 0.000000] BRK [0x02005000, 0x02005fff] PGTABLE [ 0.000000] BRK [0x02006000, 0x02006fff] PGTABLE [ 0.000000] BRK [0x02007000, 0x02007fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3c0000000-0x3dfffffff] [ 0.000000] [mem 0x3c0000000-0x3dfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0xaff8ffff] [ 0.000000] [mem 0x00100000-0xaff8ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3bfffffff] [ 0.000000] [mem 0x100000000-0x3bfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3ec600000-0x44fffffff] [ 0.000000] [mem 0x3ec600000-0x44fffffff] page 4k [ 0.000000] RAMDISK: [mem 0x08000000-0x0a861fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F9320 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000AFF90000 000044 (v01 MSI OEMSLIC 20121031 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000AFF90200 000084 (v01 7640MS A7640100 20121031 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000AFF90670 0091E6 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000AFF9E000 000040 [ 0.000000] ACPI: APIC 0x00000000AFF90390 000118 (v01 7640MS A7640100 20121031 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000AFF904B0 00003C (v01 7640MS OEMMCFG 20121031 MSFT 00000097) [ 0.000000] ACPI: SLIC 0x00000000AFF904F0 000176 (v01 MSI OEMSLIC 20121031 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000AFF9E040 000072 (v01 7640MS A7640100 20121031 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000AFF9A670 000038 (v01 7640MS OEMHPET 20121031 MSFT 00000097) [ 0.000000] ACPI: IVRS 0x00000000AFF9A6B0 0000E8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000AFF9A7A0 000470 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3ec7e6000-0x3ec7f9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x44fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00095fff] [ 0.000000] node 0: [mem 0x00100000-0xaff8ffff] [ 0.000000] node 0: [mem 0x100000000-0x44fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x44fffffff] [ 0.000000] On node 0 totalpages: 4194085 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3989 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11199 pages used for memmap [ 0.000000] DMA32 zone: 716688 pages, LIFO batch:31 [ 0.000000] Normal zone: 54272 pages used for memmap [ 0.000000] Normal zone: 3473408 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 2400000 [ 0.000000] Remapped 327898 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 24 CPUs, 22 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x00096fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaff90000-0xaff9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaff9e000-0xaffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaffe0000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.4.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88043c400000 s86720 r8192 d32064 u131072 [ 0.000000] pcpu-alloc: s86720 r8192 d32064 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- -- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4128529 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=/dev/mapper/qubes_dom0-root ro rd.luks.uuid=luks-878dd9b7-fc12-4283-8802-999f47aab5ab rd.lvm.lv=qubes_dom0/root vconsole.font=latarcyrheb-sun16 rd.lvm.lv=qubes_dom0/swap modprobe xen-pciback hide=(09:00.0)(09:00.0) permissive=1 rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x438400000-0x43c400000] (64MB) mapped at [ffff880438400000-ffff88043c3fffff] [ 0.000000] Memory: 16002048K/16776340K available (7540K kernel code, 1140K rwdata, 3348K rodata, 1480K init, 1448K bss, 774292K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3400.296 MHz processor [ 1.512017] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.59 BogoMIPS (lpj=3400296) [ 1.512020] pid_max: default: 32768 minimum: 301 [ 1.512028] ACPI: Core revision 20141107 [ 1.523974] ACPI: All ACPI Tables successfully acquired [ 1.526257] Security Framework initialized [ 1.526262] SELinux: Initializing. [ 1.526268] SELinux: Starting in permissive mode [ 1.528228] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 1.532815] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 1.534700] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.534732] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.535045] Initializing cgroup subsys memory [ 1.535052] Initializing cgroup subsys devices [ 1.535054] Initializing cgroup subsys freezer [ 1.535057] Initializing cgroup subsys net_cls [ 1.535060] Initializing cgroup subsys blkio [ 1.535062] Initializing cgroup subsys perf_event [ 1.535065] Initializing cgroup subsys net_prio [ 1.535067] Initializing cgroup subsys hugetlb [ 1.535104] CPU: Physical Processor ID: 0 [ 1.535105] CPU: Processor Core ID: 0 [ 1.535107] mce: CPU supports 2 MCE banks [ 1.535117] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 1.535212] Freeing SMP alternatives memory: 24K (ffffffff81e90000 - ffffffff81e96000) [ 1.535969] ftrace: allocating 27662 entries in 109 pages [ 1.545376] Performance Events: Broken PMU hardware detected, using software events only. [ 1.545390] Failed to access perfctr msr (MSR c0010004 is 0) [ 1.545959] NMI watchdog: disabled (cpu0): hardware events not enabled [ 1.546054] installing Xen timer for CPU 1 [ 1.546226] x86: Booted up 1 node, 2 CPUs [ 1.546425] devtmpfs: initialized [ 1.550188] PM: Registering ACPI NVS region [mem 0xaff9e000-0xaffdffff] (270336 bytes) [ 1.550339] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.550341] pinctrl core: initialized pinctrl subsystem [ 1.550391] RTC time: 17:37:38, date: 07/28/15 [ 1.550509] NET: Registered protocol family 16 [ 1.550522] xen:grant_table: Grant tables using version 1 layout [ 1.550530] Grant table initialized [ 1.550869] node 0 link 0: io port [1000, ffffff] [ 1.550876] TOM: 00000000b0000000 aka 2816M [ 1.550878] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 1.550883] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 1.550886] node 0 link 0: mmio [f0000000, ffffffff] [ 1.550888] node 0 link 0: mmio [a0000, bffff] [ 1.550890] node 0 link 0: mmio [b0000000, dfffffff] [ 1.550892] TOM2: 0000000450000000 aka 17664M [ 1.550893] bus: [bus 00-1f] on node 0 link 0 [ 1.550894] bus: 00 [io 0x0000-0xffff] [ 1.550895] bus: 00 [mem 0xf0000000-0xffffffff] [ 1.550896] bus: 00 [mem 0x000a0000-0x000bffff] [ 1.550897] bus: 00 [mem 0xb0000000-0xdfffffff] [ 1.550898] bus: 00 [mem 0x450000000-0xfcffffffff] [ 1.550998] ACPI: bus type PCI registered [ 1.551000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.551120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.551122] PCI: not using MMCONFIG [ 1.551123] PCI: Using configuration type 1 for base access [ 1.551124] PCI: Using configuration type 1 for extended access [ 1.555984] ACPI: Added _OSI(Module Device) [ 1.555987] ACPI: Added _OSI(Processor Device) [ 1.555989] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.555990] ACPI: Added _OSI(Processor Aggregator Device) [ 1.556717] xen: registering gsi 9 triggering 0 polarity 1 [ 1.557599] ACPI: Executed 3 blocks of module-level executable AML code [ 1.560911] ACPI: Interpreter enabled [ 1.560919] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 1.560922] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580) [ 1.560931] ACPI: (supports S0 S1 S4 S5) [ 1.560932] ACPI: Using IOAPIC for interrupt routing [ 1.560957] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.561808] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.580808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.585759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.585765] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.585769] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.586107] PCI host bridge to bus 0000:00 [ 1.586110] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.586112] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.586113] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.586115] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.586116] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 1.586118] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff] [ 1.586119] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 1.586136] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 1.586310] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 1.586442] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400 [ 1.586504] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.586551] pci 0000:00:03.0: System wakeup disabled by ACPI [ 1.586595] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 1.586656] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.586696] pci 0000:00:04.0: System wakeup disabled by ACPI [ 1.586740] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 1.586800] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.586839] pci 0000:00:05.0: System wakeup disabled by ACPI [ 1.586882] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 1.586942] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 1.586980] pci 0000:00:06.0: System wakeup disabled by ACPI [ 1.587028] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 1.587087] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.587126] pci 0000:00:09.0: System wakeup disabled by ACPI [ 1.587172] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400 [ 1.587232] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 1.587271] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 1.587328] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 1.587351] pci 0000:00:11.0: reg 0x10: [io 0x7000-0x7007] [ 1.587360] pci 0000:00:11.0: reg 0x14: [io 0x6000-0x6003] [ 1.587370] pci 0000:00:11.0: reg 0x18: [io 0x5000-0x5007] [ 1.587380] pci 0000:00:11.0: reg 0x1c: [io 0x3000-0x3003] [ 1.587390] pci 0000:00:11.0: reg 0x20: [io 0x2000-0x200f] [ 1.587400] pci 0000:00:11.0: reg 0x24: [mem 0xfe2ff000-0xfe2ff3ff] [ 1.587539] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 1.587558] pci 0000:00:12.0: reg 0x10: [mem 0xfe2f7000-0xfe2f7fff] [ 1.587649] pci 0000:00:12.0: System wakeup disabled by ACPI [ 1.587701] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 1.587721] pci 0000:00:12.2: reg 0x10: [mem 0xfe2ff400-0xfe2ff4ff] [ 1.587808] pci 0000:00:12.2: supports D1 D2 [ 1.587809] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.587847] pci 0000:00:12.2: System wakeup disabled by ACPI [ 1.587900] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 1.587913] pci 0000:00:13.0: reg 0x10: [mem 0xfe2fc000-0xfe2fcfff] [ 1.588001] pci 0000:00:13.0: System wakeup disabled by ACPI [ 1.588048] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 1.588068] pci 0000:00:13.2: reg 0x10: [mem 0xfe2ff800-0xfe2ff8ff] [ 1.588155] pci 0000:00:13.2: supports D1 D2 [ 1.588156] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.588193] pci 0000:00:13.2: System wakeup disabled by ACPI [ 1.588249] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 1.588384] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 1.588407] pci 0000:00:14.2: reg 0x10: [mem 0xfe2f8000-0xfe2fbfff 64bit] [ 1.588477] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.588512] pci 0000:00:14.2: System wakeup disabled by ACPI [ 1.588561] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 1.588697] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 1.588762] pci 0000:00:14.4: System wakeup disabled by ACPI [ 1.588803] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 1.588817] pci 0000:00:14.5: reg 0x10: [mem 0xfe2fd000-0xfe2fdfff] [ 1.588908] pci 0000:00:14.5: System wakeup disabled by ACPI [ 1.588957] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 1.589037] pci 0000:00:15.0: supports D1 D2 [ 1.589078] pci 0000:00:15.0: System wakeup disabled by ACPI [ 1.589132] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 1.589216] pci 0000:00:15.1: supports D1 D2 [ 1.589257] pci 0000:00:15.1: System wakeup disabled by ACPI [ 1.589316] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 1.589333] pci 0000:00:16.0: reg 0x10: [mem 0xfe2fe000-0xfe2fefff] [ 1.589423] pci 0000:00:16.0: System wakeup disabled by ACPI [ 1.589470] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 1.589490] pci 0000:00:16.2: reg 0x10: [mem 0xfe2ffc00-0xfe2ffcff] [ 1.589581] pci 0000:00:16.2: supports D1 D2 [ 1.589582] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.589620] pci 0000:00:16.2: System wakeup disabled by ACPI [ 1.589674] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.589762] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.589838] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.589914] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.589999] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.590140] pci 0000:09:00.0: [1002:6718] type 00 class 0x030000 [ 1.590159] pci 0000:09:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.590173] pci 0000:09:00.0: reg 0x18: [mem 0xfe9c0000-0xfe9dffff 64bit] [ 1.590182] pci 0000:09:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.590199] pci 0000:09:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref] [ 1.590247] pci 0000:09:00.0: supports D1 D2 [ 1.590316] pci 0000:09:00.1: [1002:aa80] type 00 class 0x040300 [ 1.590334] pci 0000:09:00.1: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 1.590418] pci 0000:09:00.1: supports D1 D2 [ 1.591631] pci 0000:00:03.0: PCI bridge to [bus 09] [ 1.591640] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 1.591643] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.591648] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.591736] pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010 [ 1.591761] pci 0000:08:00.0: reg 0x10: [mem 0xfe8ff800-0xfe8fffff 64bit] [ 1.591772] pci 0000:08:00.0: reg 0x18: [io 0xd800-0xd8ff] [ 1.591872] pci 0000:08:00.0: supports D2 [ 1.591874] pci 0000:08:00.0: PME# supported from D2 D3hot D3cold [ 1.593685] pci 0000:00:04.0: PCI bridge to [bus 08] [ 1.593693] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.593696] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.593786] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 1.593804] pci 0000:07:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 1.593830] pci 0000:07:00.0: reg 0x18: [mem 0xcffff000-0xcfffffff 64bit pref] [ 1.593847] pci 0000:07:00.0: reg 0x20: [mem 0xcfff8000-0xcfffbfff 64bit pref] [ 1.593858] pci 0000:07:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref] [ 1.593937] pci 0000:07:00.0: supports D1 D2 [ 1.593939] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.595740] pci 0000:00:05.0: PCI bridge to [bus 07] [ 1.595748] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 1.595751] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.595756] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 1.595849] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 1.595868] pci 0000:06:00.0: reg 0x10: [io 0xb800-0xb8ff] [ 1.595893] pci 0000:06:00.0: reg 0x18: [mem 0xcfeff000-0xcfefffff 64bit pref] [ 1.595909] pci 0000:06:00.0: reg 0x20: [mem 0xcfef8000-0xcfefbfff 64bit pref] [ 1.595920] pci 0000:06:00.0: reg 0x30: [mem 0xfe6e0000-0xfe6fffff pref] [ 1.595999] pci 0000:06:00.0: supports D1 D2 [ 1.596001] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.597802] pci 0000:00:06.0: PCI bridge to [bus 06] [ 1.597809] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 1.597813] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.597817] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.597911] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.597933] pci 0000:05:00.0: reg 0x10: [mem 0xfe5fe000-0xfe5fffff 64bit] [ 1.598044] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.599860] pci 0000:00:09.0: PCI bridge to [bus 05] [ 1.599869] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.599962] pci 0000:04:00.0: [1002:6718] type 00 class 0x030000 [ 1.599982] pci 0000:04:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.599994] pci 0000:04:00.0: reg 0x18: [mem 0xfe4c0000-0xfe4dffff 64bit] [ 1.600001] pci 0000:04:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 1.600015] pci 0000:04:00.0: reg 0x30: [mem 0xfe4a0000-0xfe4bffff pref] [ 1.600074] pci 0000:04:00.0: supports D1 D2 [ 1.600165] pci 0000:04:00.1: [1002:aa80] type 00 class 0x040300 [ 1.600185] pci 0000:04:00.1: reg 0x10: [mem 0xfe4fc000-0xfe4fffff 64bit] [ 1.600276] pci 0000:04:00.1: supports D1 D2 [ 1.601914] pci 0000:00:0b.0: PCI bridge to [bus 04] [ 1.601922] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 1.601925] pci 0000:00:0b.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 1.601930] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.602027] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.602037] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.602038] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.602040] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.602041] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 1.602043] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode) [ 1.602044] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 1.602113] pci 0000:00:15.0: PCI bridge to [bus 02] [ 1.602219] pci 0000:01:00.0: [197b:2363] type 00 class 0x010185 [ 1.602324] pci 0000:01:00.0: reg 0x24: [mem 0xfe3ffc00-0xfe3ffdff] [ 1.602408] pci 0000:01:00.0: PME# supported from D3hot [ 1.602534] pci 0000:01:00.1: [197b:0368] type 00 class 0x010185 [ 1.602554] pci 0000:01:00.1: reg 0x10: [io 0x9800-0x9807] [ 1.602566] pci 0000:01:00.1: reg 0x14: [io 0x9400-0x9403] [ 1.602577] pci 0000:01:00.1: reg 0x18: [io 0x9000-0x9007] [ 1.602588] pci 0000:01:00.1: reg 0x1c: [io 0x8800-0x8803] [ 1.602600] pci 0000:01:00.1: reg 0x20: [io 0x8400-0x840f] [ 1.603971] pci 0000:00:15.1: PCI bridge to [bus 01] [ 1.603980] pci 0000:00:15.1: bridge window [io 0x8000-0x9fff] [ 1.603984] pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff] [ 1.604065] pci_bus 0000:00: on NUMA node 0 [ 1.604245] xen: registering gsi 13 triggering 1 polarity 0 [ 1.604500] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 1.604573] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15) [ 1.604649] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15) [ 1.604730] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 1.604788] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 1.604833] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 1.604878] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 1.604922] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 1.605039] xen:balloon: Initialising balloon driver [ 1.606375] xen_balloon: Initialising balloon driver [ 1.606566] vgaarb: setting as boot device: PCI:0000:09:00.0 [ 1.606568] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.606575] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none [ 1.606577] vgaarb: loaded [ 1.606578] vgaarb: bridge control possible 0000:04:00.0 [ 1.606579] vgaarb: bridge control possible 0000:09:00.0 [ 1.606675] SCSI subsystem initialized [ 1.606724] libata version 3.00 loaded. [ 1.606752] ACPI: bus type USB registered [ 1.606769] usbcore: registered new interface driver usbfs [ 1.606778] usbcore: registered new interface driver hub [ 1.606791] usbcore: registered new device driver usb [ 1.606905] PCI: Using ACPI for IRQ routing [ 1.615705] PCI: pci_cache_line_size set to 64 bytes [ 1.615801] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 1.615803] e820: reserve RAM buffer [mem 0xaff90000-0xafffffff] [ 1.615909] NetLabel: Initializing [ 1.615911] NetLabel: domain hash size = 128 [ 1.615911] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.615923] NetLabel: unlabeled traffic allowed by default [ 1.616040] Switched to clocksource xen [ 1.622287] pnp: PnP ACPI init [ 1.622477] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.622481] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.622550] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.622552] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.622604] xen: registering gsi 8 triggering 1 polarity 0 [ 1.622627] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.622854] xen: registering gsi 4 triggering 1 polarity 0 [ 1.622859] pnp 00:03: [dma 0 disabled] [ 1.622900] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.623019] system 00:04: [io 0x0600-0x06df] has been reserved [ 1.623021] system 00:04: [io 0x0ae0-0x0aef] has been reserved [ 1.623022] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.623146] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.623148] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.623150] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.623369] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.623371] system 00:06: [io 0x040b] has been reserved [ 1.623373] system 00:06: [io 0x04d6] has been reserved [ 1.623374] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 1.623376] system 00:06: [io 0x0c14] has been reserved [ 1.623377] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 1.623379] system 00:06: [io 0x0c52] has been reserved [ 1.623380] system 00:06: [io 0x0c6c] has been reserved [ 1.623381] system 00:06: [io 0x0c6f] has been reserved [ 1.623383] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 1.623384] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 1.623386] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 1.623387] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 1.623389] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 1.623390] system 00:06: [io 0x0800-0x089f] could not be reserved [ 1.623392] system 00:06: [io 0x0b00-0x0b1f] has been reserved [ 1.623394] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 1.623395] system 00:06: [io 0x0900-0x090f] has been reserved [ 1.623397] system 00:06: [io 0x0910-0x091f] has been reserved [ 1.623400] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 1.623402] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.623404] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.623405] system 00:06: [mem 0xfed80000-0xfed80fff] has been reserved [ 1.623407] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.623477] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 1.623479] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.623625] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.623627] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 1.623628] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.623630] system 00:08: [mem 0x00100000-0xafffffff] could not be reserved [ 1.623632] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.623634] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.623727] pnp: PnP ACPI: found 9 devices [ 1.628080] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.628137] pci 0000:00:03.0: PCI bridge to [bus 09] [ 1.628140] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 1.628145] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.628148] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.628153] pci 0000:00:04.0: PCI bridge to [bus 08] [ 1.628155] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.628158] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.628164] pci 0000:00:05.0: PCI bridge to [bus 07] [ 1.628167] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 1.628170] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.628173] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 1.628177] pci 0000:00:06.0: PCI bridge to [bus 06] [ 1.628180] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 1.628183] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.628186] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.628191] pci 0000:00:09.0: PCI bridge to [bus 05] [ 1.628194] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.628200] pci 0000:00:0b.0: PCI bridge to [bus 04] [ 1.628202] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 1.628206] pci 0000:00:0b.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 1.628209] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.628213] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.628225] pci 0000:00:15.0: PCI bridge to [bus 02] [ 1.628236] pci 0000:00:15.1: PCI bridge to [bus 01] [ 1.628239] pci 0000:00:15.1: bridge window [io 0x8000-0x9fff] [ 1.628243] pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff] [ 1.628251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.628253] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.628254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.628255] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.628257] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff] [ 1.628258] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.628260] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 1.628261] pci_bus 0000:09: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.628263] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.628264] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 1.628266] pci_bus 0000:08: resource 1 [mem 0xfe800000-0xfe8fffff] [ 1.628267] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 1.628268] pci_bus 0000:07: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.628270] pci_bus 0000:07: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 1.628271] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 1.628273] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 1.628274] pci_bus 0000:06: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.628276] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff] [ 1.628277] pci_bus 0000:04: resource 0 [io 0xa000-0xafff] [ 1.628279] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff] [ 1.628280] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.628282] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 1.628283] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 1.628285] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 1.628286] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 1.628287] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff] [ 1.628289] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 1.628290] pci_bus 0000:01: resource 0 [io 0x8000-0x9fff] [ 1.628292] pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe3fffff] [ 1.628324] NET: Registered protocol family 2 [ 1.628629] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.628977] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.629243] TCP: Hash tables configured (established 131072 bind 65536) [ 1.629290] TCP: reno registered [ 1.629328] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.629429] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.629573] NET: Registered protocol family 1 [ 1.629684] xen: registering gsi 18 triggering 0 polarity 1 [ 1.629697] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.439225] xen: registering gsi 17 triggering 0 polarity 1 [ 2.439241] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.439348] xen: registering gsi 18 triggering 0 polarity 1 [ 2.439350] Already setup the GSI :18 [ 2.512223] xen: registering gsi 17 triggering 0 polarity 1 [ 2.512228] Already setup the GSI :17 [ 2.512333] xen: registering gsi 18 triggering 0 polarity 1 [ 2.512335] Already setup the GSI :18 [ 2.584227] xen: registering gsi 18 triggering 0 polarity 1 [ 2.584232] Already setup the GSI :18 [ 2.657256] xen: registering gsi 17 triggering 0 polarity 1 [ 2.657261] Already setup the GSI :17 [ 2.657342] pci 0000:09:00.0: Video device with shadowed ROM [ 2.657390] xen: registering gsi 53 triggering 0 polarity 1 [ 2.657402] xen: --> pirq=53 -> irq=53 (gsi=53) [ 2.657430] xen: registering gsi 48 triggering 0 polarity 1 [ 2.657433] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.657485] PCI: CLS 64 bytes, default 64 [ 2.657556] Unpacking initramfs... [ 2.705286] Freeing initrd memory: 41352K (ffff880008000000 - ffff88000a862000) [ 2.706481] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2.706496] Initialise system trusted keyring [ 2.706516] audit: initializing netlink subsys (disabled) [ 2.706534] audit: type=2000 audit(1438105059.700:1): initialized [ 2.706890] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.708186] zpool: loaded [ 2.708187] zbud: loaded [ 2.708434] VFS: Disk quotas dquot_6.5.2 [ 2.708479] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.708940] Key type big_key registered [ 2.708944] SELinux: Registering netfilter hooks [ 2.710173] alg: No test for stdrng (krng) [ 2.710186] NET: Registered protocol family 38 [ 2.710191] Key type asymmetric registered [ 2.710193] Asymmetric key parser 'x509' registered [ 2.710245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.710311] io scheduler noop registered [ 2.710313] io scheduler deadline registered [ 2.710342] io scheduler cfq registered (default) [ 2.710519] xen: registering gsi 52 triggering 0 polarity 1 [ 2.710530] xen: --> pirq=52 -> irq=52 (gsi=52) [ 2.710614] xen: registering gsi 52 triggering 0 polarity 1 [ 2.710615] Already setup the GSI :52 [ 2.710683] xen: registering gsi 52 triggering 0 polarity 1 [ 2.710685] Already setup the GSI :52 [ 2.710751] xen: registering gsi 53 triggering 0 polarity 1 [ 2.710753] Already setup the GSI :53 [ 2.710848] xen: registering gsi 54 triggering 0 polarity 1 [ 2.710852] xen: --> pirq=54 -> irq=54 (gsi=54) [ 2.710957] xen: registering gsi 16 triggering 0 polarity 1 [ 2.710961] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.711066] xen: registering gsi 16 triggering 0 polarity 1 [ 2.711067] Already setup the GSI :16 [ 2.711132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.711145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.711247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.711250] ACPI: Power Button [PWRB] [ 2.711282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.711283] ACPI: Power Button [PWRF] [ 2.711358] Warning: Processor Platform Limit not supported. [ 2.711458] GHES: HEST is not enabled! [ 2.711965] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.732761] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.733675] hpet_acpi_add: no address or irqs in _CRS [ 2.733805] Non-volatile memory driver v1.3 [ 2.733809] Linux agpgart interface v0.103 [ 2.734245] ahci 0000:00:11.0: version 3.0 [ 2.734307] xen: registering gsi 19 triggering 0 polarity 1 [ 2.734321] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.734464] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.734466] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.735168] scsi host0: ahci [ 2.735421] scsi host1: ahci [ 2.735565] scsi host2: ahci [ 2.735664] scsi host3: ahci [ 2.735842] scsi host4: ahci [ 2.736072] scsi host5: ahci [ 2.736134] ata1: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff100 irq 71 [ 2.736137] ata2: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff180 irq 71 [ 2.736139] ata3: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff200 irq 71 [ 2.736141] ata4: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff280 irq 71 [ 2.736143] ata5: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff300 irq 71 [ 2.736145] ata6: SATA max UDMA/133 abar m1024@0xfe2ff000 port 0xfe2ff380 irq 71 [ 2.736257] xen: registering gsi 17 triggering 0 polarity 1 [ 2.736261] Already setup the GSI :17 [ 2.736354] ahci 0000:01:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.736357] ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.736724] scsi host6: ahci [ 2.736814] scsi host7: ahci [ 2.736876] ata7: SATA max UDMA/133 abar m512@0xfe3ffc00 port 0xfe3ffd00 irq 17 [ 2.736880] ata8: SATA max UDMA/133 abar m512@0xfe3ffc00 port 0xfe3ffd80 irq 17 [ 2.736975] libphy: Fixed MDIO Bus: probed [ 2.737138] xen: registering gsi 48 triggering 0 polarity 1 [ 2.737141] Already setup the GSI :48 [ 2.737153] QUIRK: Enable AMD PLL fix [ 2.737178] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 2.737234] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1 [ 2.737684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.737687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.737689] usb usb1: Product: xHCI Host Controller [ 2.737690] usb usb1: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 xhci-hcd [ 2.737692] usb usb1: SerialNumber: 0000:05:00.0 [ 2.737963] hub 1-0:1.0: USB hub found [ 2.738022] hub 1-0:1.0: 2 ports detected [ 2.738199] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 2.738324] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 2.740828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.740829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.740831] usb usb2: Product: xHCI Host Controller [ 2.740832] usb usb2: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 xhci-hcd [ 2.740833] usb usb2: SerialNumber: 0000:05:00.0 [ 2.741010] hub 2-0:1.0: USB hub found [ 2.741019] hub 2-0:1.0: 2 ports detected [ 2.741158] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.741170] ehci-pci: EHCI PCI platform driver [ 2.741255] xen: registering gsi 17 triggering 0 polarity 1 [ 2.741258] Already setup the GSI :17 [ 2.741293] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.741400] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 2.741404] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.741416] ehci-pci 0000:00:12.2: debug port 1 [ 2.741474] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe2ff400 [ 2.747102] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.747159] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.747161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.747162] usb usb3: Product: EHCI Host Controller [ 2.747163] usb usb3: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ehci_hcd [ 2.747165] usb usb3: SerialNumber: 0000:00:12.2 [ 2.747386] hub 3-0:1.0: USB hub found [ 2.747393] hub 3-0:1.0: 5 ports detected [ 2.747586] xen: registering gsi 17 triggering 0 polarity 1 [ 2.747589] Already setup the GSI :17 [ 2.747627] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.747748] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.747752] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.747764] ehci-pci 0000:00:13.2: debug port 1 [ 2.747825] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe2ff800 [ 2.753134] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.753196] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.753197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.753199] usb usb4: Product: EHCI Host Controller [ 2.753200] usb usb4: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ehci_hcd [ 2.753201] usb usb4: SerialNumber: 0000:00:13.2 [ 2.753418] hub 4-0:1.0: USB hub found [ 2.753425] hub 4-0:1.0: 5 ports detected [ 2.753618] xen: registering gsi 17 triggering 0 polarity 1 [ 2.753621] Already setup the GSI :17 [ 2.753658] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.753788] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 2.753796] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.753808] ehci-pci 0000:00:16.2: debug port 1 [ 2.753866] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe2ffc00 [ 2.759134] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.759191] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.759193] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.759194] usb usb5: Product: EHCI Host Controller [ 2.759195] usb usb5: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ehci_hcd [ 2.759197] usb usb5: SerialNumber: 0000:00:16.2 [ 2.759420] hub 5-0:1.0: USB hub found [ 2.759427] hub 5-0:1.0: 4 ports detected [ 2.759553] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.759565] ohci-pci: OHCI PCI platform driver [ 2.759646] xen: registering gsi 18 triggering 0 polarity 1 [ 2.759649] Already setup the GSI :18 [ 2.759681] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.759798] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.759857] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe2f7000 [ 2.814221] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.814224] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.814226] usb usb6: Product: OHCI PCI host controller [ 2.814227] usb usb6: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ohci_hcd [ 2.814228] usb usb6: SerialNumber: 0000:00:12.0 [ 2.814401] hub 6-0:1.0: USB hub found [ 2.814408] hub 6-0:1.0: 5 ports detected [ 2.814599] xen: registering gsi 18 triggering 0 polarity 1 [ 2.814603] Already setup the GSI :18 [ 2.814634] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.814749] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.814790] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe2fc000 [ 2.869216] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.869219] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.869221] usb usb7: Product: OHCI PCI host controller [ 2.869222] usb usb7: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ohci_hcd [ 2.869223] usb usb7: SerialNumber: 0000:00:13.0 [ 2.869405] hub 7-0:1.0: USB hub found [ 2.869413] hub 7-0:1.0: 5 ports detected [ 2.869598] xen: registering gsi 18 triggering 0 polarity 1 [ 2.869601] Already setup the GSI :18 [ 2.869633] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.869750] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 2.869790] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe2fd000 [ 2.924211] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.924214] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.924216] usb usb8: Product: OHCI PCI host controller [ 2.924217] usb usb8: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ohci_hcd [ 2.924218] usb usb8: SerialNumber: 0000:00:14.5 [ 2.924394] hub 8-0:1.0: USB hub found [ 2.924402] hub 8-0:1.0: 2 ports detected [ 2.924557] xen: registering gsi 18 triggering 0 polarity 1 [ 2.924561] Already setup the GSI :18 [ 2.924592] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.924726] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 2.924776] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe2fe000 [ 2.979210] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.979213] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.979215] usb usb9: Product: OHCI PCI host controller [ 2.979216] usb usb9: Manufacturer: Linux 3.19.3-4.pvops.qubes.x86_64 ohci_hcd [ 2.979217] usb usb9: SerialNumber: 0000:00:16.0 [ 2.979397] hub 9-0:1.0: USB hub found [ 2.979407] hub 9-0:1.0: 4 ports detected [ 2.979521] uhci_hcd: USB Universal Host Controller Interface driver [ 2.979593] usbcore: registered new interface driver usbserial [ 2.979599] usbcore: registered new interface driver usbserial_generic [ 2.979605] usbserial: USB Serial support registered for generic [ 2.979638] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.980116] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.980126] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.980299] mousedev: PS/2 mouse device common for all mice [ 2.980493] rtc_cmos 00:02: RTC can wake from S4 [ 2.980679] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.980708] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.980780] device-mapper: uevent: version 1.0.3 [ 2.980880] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@xxxxxxxxxx [ 2.981319] hidraw: raw HID events driver (C) Jiri Kosina [ 2.981367] usbcore: registered new interface driver usbhid [ 2.981368] usbhid: USB HID core driver [ 2.981435] drop_monitor: Initializing network drop monitor service [ 2.981499] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.981562] TCP: cubic registered [ 2.981568] Initializing XFRM netlink socket [ 2.981665] NET: Registered protocol family 10 [ 2.981829] mip6: Mobile IPv6 [ 2.981832] NET: Registered protocol family 17 [ 2.982238] Loading compiled-in X.509 certificates [ 2.982248] registered taskstats version 1 [ 2.982886] Magic number: 7:495:644 [ 2.983019] rtc_cmos 00:02: setting system clock to 2015-07-28 17:37:39 UTC (1438105059) [ 2.983070] PM: Hibernation image not present or could not be loaded. [ 3.041160] ata7: SATA link down (SStatus 0 SControl 300) [ 3.041183] ata1: SATA link down (SStatus 0 SControl 300) [ 3.041208] ata8: SATA link down (SStatus 0 SControl 300) [ 3.041228] ata2: SATA link down (SStatus 0 SControl 300) [ 3.049140] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 3.164585] usb 3-3: New USB device found, idVendor=154b, idProduct=6545 [ 3.164589] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.164590] usb 3-3: Product: USB 2.0 FD [ 3.164592] usb 3-3: Manufacturer: PNY [ 3.164593] usb 3-3: SerialNumber: 2444500CD8109CA7 [ 3.196104] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.196127] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.196142] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.196162] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.196828] ata6.00: ATA-7: WDC WD800AAJS-60PSA0, 21.12M22, max UDMA/100 [ 3.196831] ata6.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.196926] ata3.00: ATA-8: ST1500DL003-9VT16L, CC32, max UDMA/133 [ 3.196929] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.197238] ata4.00: ATA-8: ST3500413AS, JC45, max UDMA/133 [ 3.197241] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.197282] ata5.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 3.197283] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.197598] ata6.00: configured for UDMA/100 [ 3.197797] ata3.00: configured for UDMA/133 [ 3.197889] scsi 2:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 3.198057] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 3.198104] sd 2:0:0:0: [sda] Write Protect is off [ 3.198106] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.198118] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.198261] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.198590] ata4.00: configured for UDMA/133 [ 3.198604] ata5.00: configured for UDMA/133 [ 3.200398] usb 7-1: new low-speed USB device number 2 using ohci-pci [ 3.200476] scsi 3:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5 [ 3.200689] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.200714] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.200748] sd 3:0:0:0: [sdb] Write Protect is off [ 3.200750] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.200764] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.200777] scsi 4:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 3.200902] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.200917] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.200932] sd 4:0:0:0: [sdc] Write Protect is off [ 3.200934] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.200947] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.200976] scsi 5:0:0:0: Direct-Access ATA WDC WD800AAJS-60 2M22 PQ: 0 ANSI: 5 [ 3.201106] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 3.201157] sd 5:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.201192] sd 5:0:0:0: [sdd] Write Protect is off [ 3.201194] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.201217] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.208017] sdc: sdc1 sdc2 [ 3.208798] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.211196] sdb: unknown partition table [ 3.211919] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.251928] sda: sda1 sda2 sda3 sda4 [ 3.252739] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 3.252757] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.253669] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.254304] Freeing unused kernel memory: 1480K (ffffffff81d1e000 - ffffffff81e90000) [ 3.254309] Write protecting the kernel read-only data: 12288k [ 3.257092] Freeing unused kernel memory: 640K (ffff880001760000 - ffff880001800000) [ 3.257441] Freeing unused kernel memory: 748K (ffff880001b45000 - ffff880001c00000) [ 3.261440] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 3.261486] systemd[1]: Detected virtualization 'xen'. [ 3.261490] systemd[1]: Running in initial RAM disk. [ 3.261560] systemd[1]: Set hostname to . [ 3.269921] random: systemd urandom read with 71 bits of entropy available [ 3.274148] usb 3-5: new high-speed USB device number 3 using ehci-pci [ 3.302120] usb 9-1: new low-speed USB device number 2 using ohci-pci [ 3.325402] systemd[1]: Expecting device dev-mapper-qubes_dom0\x2droot.device... [ 3.325419] systemd[1]: Starting -.slice. [ 3.325830] systemd[1]: Created slice -.slice. [ 3.325841] systemd[1]: Starting System Slice. [ 3.325928] systemd[1]: Created slice System Slice. [ 3.325937] systemd[1]: Starting Slices. [ 3.325948] systemd[1]: Reached target Slices. [ 3.325956] systemd[1]: Starting Timers. [ 3.325966] systemd[1]: Reached target Timers. [ 3.325975] systemd[1]: Expecting device dev-disk-by\x2duuid-878dd9b7\x2dfc12\x2d4283\x2d8802\x2d999f47aab5ab.device... [ 3.325986] systemd[1]: Expecting device dev-mapper-luks\x2d878dd9b7\x2dfc12\x2d4283\x2d8802\x2d999f47aab5ab.device... [ 3.325998] systemd[1]: Starting Journal Socket. [ 3.326095] systemd[1]: Listening on Journal Socket. [ 3.326247] systemd[1]: Starting dracut cmdline hook... [ 3.327023] systemd[1]: Starting Journal Service... [ 3.333168] systemd[1]: Started Journal Service. [ 3.341559] xen:xen_evtchn: Event-channel device installed [ 3.358150] usb 7-1: New USB device found, idVendor=046d, idProduct=c517 [ 3.358154] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.358156] usb 7-1: Product: USB Receiver [ 3.358157] usb 7-1: Manufacturer: Logitech [ 3.408141] usb 3-5: New USB device found, idVendor=148f, idProduct=2870 [ 3.408145] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.408147] usb 3-5: Product: 802.11 n WLAN [ 3.408148] usb 3-5: Manufacturer: Ralink [ 3.408150] usb 3-5: SerialNumber: 1.0 [ 3.460977] xen_pciback: backend is vpci [ 3.461703] pciback 0000:06:00.0: seizing device [ 3.461784] xen: registering gsi 51 triggering 0 polarity 1 [ 3.461799] xen: --> pirq=51 -> irq=51 (gsi=51) [ 3.470225] usb 9-1: New USB device found, idVendor=045e, idProduct=00dd [ 3.470229] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.470231] usb 9-1: Product: Comfort Curve Keyboard 2000 [ 3.470232] usb 9-1: Manufacturer: Microsoft [ 3.482576] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:16.0/usb9/9-1/9-1:1.0/0003:045E:00DD.0003/input/input5 [ 3.533373] hid-generic 0003:045E:00DD.0003: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:16.0-1/input0 [ 3.546371] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:16.0/usb9/9-1/9-1:1.1/0003:045E:00DD.0004/input/input6 [ 3.597374] hid-generic 0003:045E:00DD.0004: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:16.0-1/input1 [ 3.720106] usb 9-2: new full-speed USB device number 3 using ohci-pci [ 3.875190] usb 9-2: New USB device found, idVendor=1532, idProduct=0013 [ 3.875193] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.875195] usb 9-2: Product: Razer Orochi [ 3.875197] usb 9-2: Manufacturer: Razer [ 3.881511] input: Razer Razer Orochi as /devices/pci0000:00/0000:00:16.0/usb9/9-2/9-2:1.0/0003:1532:0013.0005/input/input7 [ 3.881783] hid-generic 0003:1532:0013.0005: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Orochi] on usb-0000:00:16.0-2/input0 [ 3.885589] input: Razer Razer Orochi as /devices/pci0000:00/0000:00:16.0/usb9/9-2/9-2:1.1/0003:1532:0013.0006/input/input8 [ 3.936393] hid-generic 0003:1532:0013.0006: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Orochi] on usb-0000:00:16.0-2/input1 [ 4.465427] pciback 0000:07:00.0: seizing device [ 4.465484] xen: registering gsi 46 triggering 0 polarity 1 [ 4.465499] xen: --> pirq=46 -> irq=46 (gsi=46) [ 5.604683] systemd-udevd[232]: starting version 208 [ 5.623258] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:046D:C517.0001/input/input9 [ 5.674299] logitech 0003:046D:C517.0001: input,hidraw4: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0 [ 5.674320] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 5.674879] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/0003:046D:C517.0002/input/input10 [ 5.690847] [drm] Initialized drm 1.1.0 20060810 [ 5.692416] xen: registering gsi 44 triggering 0 polarity 1 [ 5.692434] xen: --> pirq=44 -> irq=44 (gsi=44) [ 5.702066] usb-storage 3-3:1.0: USB Mass Storage device detected [ 5.712208] scsi host8: usb-storage 3-3:1.0 [ 5.712317] usbcore: registered new interface driver usb-storage [ 5.713240] random: nonblocking pool is initialized [ 5.714881] usbcore: registered new interface driver uas [ 5.715987] [drm] radeon kernel modesetting enabled. [ 5.716529] pata_jmicron 0000:01:00.1: enabling device (0000 -> 0001) [ 5.716578] xen: registering gsi 18 triggering 0 polarity 1 [ 5.716582] Already setup the GSI :18 [ 5.721084] scsi host9: pata_jmicron [ 5.725216] logitech 0003:046D:C517.0002: input,hiddev0,hidraw5: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1 [ 5.725383] scsi host10: pata_jmicron [ 5.725430] ata9: PATA max UDMA/100 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 18 [ 5.725432] ata10: PATA max UDMA/100 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 18 [ 5.725478] xen: registering gsi 28 triggering 0 polarity 1 [ 5.725494] xen: --> pirq=28 -> irq=28 (gsi=28) [ 5.726023] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6718 0x1682:0x3130). [ 5.726067] [drm] register mmio base: 0xFE9C0000 [ 5.726068] [drm] register mmio size: 131072 [ 5.728696] ATOM BIOS: CAYMAN [ 5.728763] radeon 0000:09:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 5.728765] radeon 0000:09:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 5.728767] [drm] Detected VRAM RAM=2048M, BAR=256M [ 5.728768] [drm] RAM width 256bits DDR [ 5.728838] [TTM] Zone kernel: Available graphics memory: 8023146 kiB [ 5.728839] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.728840] [TTM] Initializing pool allocator [ 5.728844] [TTM] Initializing DMA pool allocator [ 5.728864] [drm] radeon: 2048M of VRAM memory ready [ 5.728865] [drm] radeon: 1024M of GTT memory ready. [ 5.728880] [drm] Loading CAYMAN Microcode [ 5.728992] [drm] Internal thermal controller with fan control [ 5.736205] [drm] radeon: dpm initialized [ 5.736534] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.738884] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 5.753053] firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10 [ 5.755575] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 5.756243] radeon 0000:09:00.0: WB enabled [ 5.756246] radeon 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88000a88dc00 [ 5.757780] radeon 0000:09:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900144b2118 [ 5.757782] radeon 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88000a88dc04 [ 5.757784] radeon 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88000a88dc08 [ 5.757785] radeon 0000:09:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88000a88dc0c [ 5.757787] radeon 0000:09:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88000a88dc10 [ 5.758197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.758199] [drm] Driver supports precise vblank timestamp query. [ 5.758201] radeon 0000:09:00.0: radeon: MSI limited to 32-bit [ 5.758257] radeon 0000:09:00.0: radeon: using MSI. [ 5.758493] [drm] radeon: irq initialized. [ 5.785680] [drm] ring test on 0 succeeded in 2 usecs [ 5.785690] [drm] ring test on 3 succeeded in 4 usecs [ 5.785697] [drm] ring test on 4 succeeded in 4 usecs [ 5.962876] [drm] ring test on 5 succeeded in 2 usecs [ 5.962882] [drm] UVD initialized successfully. [ 5.963730] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.964178] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.964608] [drm] ib test on ring 4 succeeded in 0 usecs [ 6.116190] [drm] ib test on ring 5 succeeded [ 6.116765] [drm] Radeon Display Connectors [ 6.116766] [drm] Connector 0: [ 6.116767] [drm] DP-1 [ 6.116768] [drm] HPD5 [ 6.116770] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 6.116770] [drm] Encoders: [ 6.116771] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.116772] [drm] Connector 1: [ 6.116773] [drm] DP-2 [ 6.116774] [drm] HPD4 [ 6.116775] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 6.116776] [drm] Encoders: [ 6.116776] [drm] DFP2: INTERNAL_UNIPHY2 [ 6.116777] [drm] Connector 2: [ 6.116778] [drm] HDMI-A-1 [ 6.116778] [drm] HPD6 [ 6.116780] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 6.116780] [drm] Encoders: [ 6.116781] [drm] DFP3: INTERNAL_UNIPHY1 [ 6.116782] [drm] Connector 3: [ 6.116783] [drm] DVI-D-1 [ 6.116783] [drm] HPD1 [ 6.116785] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 6.116785] [drm] Encoders: [ 6.116786] [drm] DFP4: INTERNAL_UNIPHY1 [ 6.116787] [drm] Connector 4: [ 6.116788] [drm] DVI-I-1 [ 6.116788] [drm] HPD3 [ 6.116790] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 6.116790] [drm] Encoders: [ 6.116791] [drm] DFP5: INTERNAL_UNIPHY [ 6.116792] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.162499] [drm] fb mappable at 0xD0475000 [ 6.162502] [drm] vram apper at 0xD0000000 [ 6.162502] [drm] size 4325376 [ 6.162503] [drm] fb depth is 24 [ 6.162504] [drm] pitch is 5632 [ 6.162664] fbcon: radeondrmfb (fb0) is primary device [ 6.169287] Console: switching to colour frame buffer device 170x48 [ 6.171868] radeon 0000:09:00.0: fb0: radeondrmfb frame buffer device [ 6.171870] radeon 0000:09:00.0: registered panic notifier [ 6.175358] [drm] Initialized radeon 2.40.0 20080528 for 0000:09:00.0 on minor 0 [ 6.175434] radeon 0000:04:00.0: enabling device (0000 -> 0003) [ 6.175483] xen: registering gsi 32 triggering 0 polarity 1 [ 6.175510] xen: --> pirq=32 -> irq=32 (gsi=32) [ 6.175789] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6718 0x1002:0x0B00). [ 6.175814] [drm] register mmio base: 0xFE4C0000 [ 6.175815] [drm] register mmio size: 131072 [ 6.294174] ATOM BIOS: CAYMAN [ 6.294209] [drm] GPU not posted. posting now... [ 6.294289] firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001cecab5, S400 [ 6.316717] radeon 0000:04:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 6.316719] radeon 0000:04:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 6.316721] [drm] Detected VRAM RAM=2048M, BAR=256M [ 6.316722] [drm] RAM width 256bits DDR [ 6.316737] [drm] radeon: 2048M of VRAM memory ready [ 6.316738] [drm] radeon: 1024M of GTT memory ready. [ 6.316752] [drm] Loading CAYMAN Microcode [ 6.316757] [drm] Internal thermal controller with fan control [ 6.319975] [drm] radeon: dpm initialized [ 6.320187] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 6.321561] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 6.323837] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 6.323948] radeon 0000:04:00.0: WB enabled [ 6.323951] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880430666c00 [ 6.324742] radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90015332118 [ 6.324744] radeon 0000:04:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880430666c04 [ 6.324746] radeon 0000:04:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880430666c08 [ 6.324747] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880430666c0c [ 6.324749] radeon 0000:04:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880430666c10 [ 6.324751] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.324752] [drm] Driver supports precise vblank timestamp query. [ 6.324754] radeon 0000:04:00.0: radeon: MSI limited to 32-bit [ 6.324808] radeon 0000:04:00.0: radeon: using MSI. [ 6.325060] [drm] radeon: irq initialized. [ 6.344164] [drm] ring test on 0 succeeded in 3 usecs [ 6.344174] [drm] ring test on 3 succeeded in 4 usecs [ 6.344181] [drm] ring test on 4 succeeded in 4 usecs [ 6.521459] [drm] ring test on 5 succeeded in 1 usecs [ 6.521532] [drm] UVD initialized successfully. [ 6.522473] [drm] ib test on ring 0 succeeded in 0 usecs [ 6.522938] [drm] ib test on ring 3 succeeded in 0 usecs [ 6.523407] [drm] ib test on ring 4 succeeded in 0 usecs [ 6.675092] [drm] ib test on ring 5 succeeded [ 6.675881] [drm] Radeon Display Connectors [ 6.675884] [drm] Connector 0: [ 6.675885] [drm] DP-3 [ 6.675886] [drm] HPD5 [ 6.675888] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 6.675889] [drm] Encoders: [ 6.675890] [drm] DFP1: INTERNAL_UNIPHY2 [ 6.675891] [drm] Connector 1: [ 6.675891] [drm] DP-4 [ 6.675892] [drm] HPD4 [ 6.675893] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 6.675894] [drm] Encoders: [ 6.675895] [drm] DFP2: INTERNAL_UNIPHY2 [ 6.675895] [drm] Connector 2: [ 6.675896] [drm] HDMI-A-2 [ 6.675897] [drm] HPD6 [ 6.675898] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 6.675899] [drm] Encoders: [ 6.675900] [drm] DFP3: INTERNAL_UNIPHY1 [ 6.675900] [drm] Connector 3: [ 6.675901] [drm] DVI-D-2 [ 6.675902] [drm] HPD1 [ 6.675903] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 6.675904] [drm] Encoders: [ 6.675904] [drm] DFP4: INTERNAL_UNIPHY1 [ 6.675905] [drm] Connector 4: [ 6.675906] [drm] DVI-I-2 [ 6.675907] [drm] HPD3 [ 6.675908] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 6.675908] [drm] Encoders: [ 6.675909] [drm] DFP5: INTERNAL_UNIPHY [ 6.675910] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.696412] radeon 0000:04:00.0: No connectors reported connected with modes [ 6.696419] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.697516] [drm] fb mappable at 0xB0475000 [ 6.697517] [drm] vram apper at 0xB0000000 [ 6.697518] [drm] size 3145728 [ 6.697519] [drm] fb depth is 24 [ 6.697520] [drm] pitch is 4096 [ 6.697690] radeon 0000:04:00.0: fb1: radeondrmfb frame buffer device [ 6.698011] [drm] Initialized radeon 2.40.0 20080528 for 0000:04:00.0 on minor 1 [ 6.717332] scsi 8:0:0:0: Direct-Access PNY USB 2.0 FD 8.02 PQ: 0 ANSI: 0 CCS [ 6.718635] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 6.719603] sd 8:0:0:0: [sde] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 6.720231] sd 8:0:0:0: [sde] Write Protect is off [ 6.720234] sd 8:0:0:0: [sde] Mode Sense: 45 00 00 08 [ 6.720900] sd 8:0:0:0: [sde] No Caching mode page found [ 6.720931] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 6.736652] sde: sde1 [ 6.741026] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 16.851637] PM: Starting manual resume from disk [ 16.851643] PM: Hibernation image partition 253:1 present [ 16.851645] PM: Looking for hibernation image. [ 16.851951] PM: Image not found (code -22) [ 16.851955] PM: Hibernation image not present or could not be loaded. [ 16.940768] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.214005] systemd-journald[112]: Received SIGTERM [ 17.907422] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time. [ 19.961160] systemd-udevd[624]: starting version 208 [ 20.095825] xen_acpi_processor: Uploading Xen processor PM info [ 20.350465] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 20.926514] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.970556] wmi: Mapper loaded [ 21.887382] xen: registering gsi 16 triggering 0 polarity 1 [ 21.887388] Already setup the GSI :16 [ 21.887615] xen: registering gsi 29 triggering 0 polarity 1 [ 21.887628] xen: --> pirq=29 -> irq=29 (gsi=29) [ 21.887649] snd_hda_intel 0000:09:00.1: Handle VGA-switcheroo audio client [ 21.887764] xen: registering gsi 33 triggering 0 polarity 1 [ 21.887770] xen: --> pirq=33 -> irq=33 (gsi=33) [ 21.887783] snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client [ 21.950478] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:04:00.1/sound/card2/input11 [ 21.950665] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:09:00.1/sound/card1/input12 [ 21.964746] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 21.964750] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.964753] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 21.964757] sound hdaudioC0D2: mono: mono_out=0x0 [ 21.964759] sound hdaudioC0D2: dig-out=0x11/0x1e [ 21.964760] sound hdaudioC0D2: inputs: [ 21.964761] sound hdaudioC0D2: Front Mic=0x19 [ 21.964763] sound hdaudioC0D2: Rear Mic=0x18 [ 21.964764] sound hdaudioC0D2: Line=0x1a [ 21.988277] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 21.988361] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 21.988427] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 21.988485] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 21.988542] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 21.988602] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 21.988667] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 21.988725] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 22.036615] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20141107/utaddress-258) [ 22.036622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.075806] input: PC Speaker as /devices/platform/pcspkr/input/input21 [ 22.089169] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 22.089223] sp5100_tco: PCI Revision ID: 0x42 [ 22.089304] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 22.089318] sp5100_tco: Last reboot was not triggered by watchdog. [ 22.089357] sp5100_tco: initialized (0xffffc90003cfab00). heartbeat=60 sec (nowayout=0) [ 22.128375] MCE: In-kernel MCE decoding enabled. [ 22.136284] EDAC MC: Ver: 3.0.0 [ 22.140264] AMD64 EDAC driver v3.4.0 [ 22.140301] EDAC amd64: DRAM ECC disabled. [ 22.140311] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. [ 22.140312] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 23.099555] Adding 8069116k swap on /dev/mapper/qubes_dom0-swap. Priority:-1 extents:1 across:8069116k FS [ 23.116040] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 23.621718] cfg80211: Calling CRDA to update world regulatory domain [ 23.763200] usb 3-5: reset high-speed USB device number 3 using ehci-pci [ 23.891111] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected [ 23.946030] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 23.976300] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.977426] usbcore: registered new interface driver rt2800usb [ 24.075709] rt2800usb 3-5:1.0 wlp0s18f2u5: renamed from wlan0 [ 24.085609] systemd-udevd[648]: renamed network interface wlan0 to wlp0s18f2u5 [ 25.289126] systemd-journald[608]: Received request to flush runtime journal from PID 1 [ 26.002821] audit: type=1305 audit(1438130282.518:2): audit_pid=1163 old=0 auid=4294967295 ses=4294967295 subj=kernel res=1 [ 27.231729] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 27.231759] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20141107/utaddress-258) [ 27.231765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.931266] systemd[1]: PID file /var/run/xenstored.pid not readable (yet?) after start. [ 33.613314] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 34.206822] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 36.482723] Ebtables v2.0 registered [ 36.855569] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 50.469550] loop: module loaded [ 50.476271] loop0: p1 p2 [ 51.611291] ehci-pci 0000:00:12.2: remove, state 1 [ 51.611301] usb usb3: USB disconnect, device number 1 [ 51.611303] usb 3-3: USB disconnect, device number 2 [ 51.644440] usb 3-5: USB disconnect, device number 3 [ 51.690919] ehci-pci 0000:00:12.2: USB bus 3 deregistered [ 51.692124] pciback 0000:00:12.2: seizing device [ 51.692194] xen: registering gsi 17 triggering 0 polarity 1 [ 51.692198] Already setup the GSI :17 [ 52.010135] usb 6-3: new full-speed USB device number 2 using ohci-pci [ 52.150158] usb 6-3: not running at top speed; connect to a high speed hub [ 52.162173] usb 6-3: New USB device found, idVendor=154b, idProduct=6545 [ 52.162179] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 52.162183] usb 6-3: Product: USB 2.0 FD [ 52.162185] usb 6-3: Manufacturer: PNY [ 52.162187] usb 6-3: SerialNumber: 2444500CD8109CA7 [ 52.164988] usb-storage 6-3:1.0: USB Mass Storage device detected [ 52.165737] scsi host11: usb-storage 6-3:1.0 [ 52.289141] usb 6-5: new full-speed USB device number 3 using ohci-pci [ 52.434131] usb 6-5: not running at top speed; connect to a high speed hub [ 52.459166] usb 6-5: New USB device found, idVendor=148f, idProduct=2870 [ 52.459173] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 52.459176] usb 6-5: Product: 802.11 n WLAN [ 52.459178] usb 6-5: Manufacturer: Ralink [ 52.459180] usb 6-5: SerialNumber: 1.0 [ 52.588551] usb 6-5: reset full-speed USB device number 3 using ohci-pci [ 52.746142] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected [ 52.806127] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0001 detected [ 52.810315] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 53.174267] scsi 11:0:0:0: Direct-Access PNY USB 2.0 FD 8.02 PQ: 0 ANSI: 0 CCS [ 53.176585] sd 11:0:0:0: Attached scsi generic sg4 type 0 [ 53.189164] sd 11:0:0:0: [sde] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 53.195257] sd 11:0:0:0: [sde] Write Protect is off [ 53.195272] sd 11:0:0:0: [sde] Mode Sense: 45 00 00 08 [ 53.201307] sd 11:0:0:0: [sde] No Caching mode page found [ 53.201322] sd 11:0:0:0: [sde] Assuming drive cache: write through [ 53.279218] sde: sde1 [ 53.317239] sd 11:0:0:0: [sde] Attached SCSI removable disk [ 53.901831] rt2800usb 6-5:1.0 wlp0s18f0u5: renamed from wlan0 [ 53.914207] systemd-udevd[1940]: renamed network interface wlan0 to wlp0s18f0u5 [ 56.520934] xen_pciback: vpci: 0000:06:00.0: assign to virtual slot 0 [ 56.522385] pciback 0000:06:00.0: registering for 1 [ 56.522680] xen_pciback: vpci: 0000:07:00.0: assign to virtual slot 1 [ 56.523521] pciback 0000:07:00.0: registering for 1 [ 56.523979] xen_pciback: vpci: 0000:00:12.2: assign to virtual slot 2 [ 56.524503] pciback 0000:00:12.2: registering for 1 [ 57.924261] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 57.938263] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 57.957576] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 57.964284] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 68.329613] pciback 0000:06:00.0: enabling device (0000 -> 0003) [ 68.329668] xen: registering gsi 51 triggering 0 polarity 1 [ 68.329673] Already setup the GSI :51 [ 68.361956] xen: registering gsi 51 triggering 0 polarity 1 [ 68.361963] Already setup the GSI :51 [ 68.362174] xen: registering gsi 51 triggering 0 polarity 1 [ 68.362176] Already setup the GSI :51 [ 68.362307] xen: registering gsi 51 triggering 0 polarity 1 [ 68.362309] Already setup the GSI :51 [ 68.362408] xen: registering gsi 51 triggering 0 polarity 1 [ 68.362410] Already setup the GSI :51 [ 68.365111] pciback 0000:06:00.0: Driver tried to write to a read-only configuration space field at offset 0x52, size 2. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 68.378500] pciback 0000:07:00.0: enabling device (0000 -> 0003) [ 68.378556] xen: registering gsi 46 triggering 0 polarity 1 [ 68.378561] Already setup the GSI :46 [ 68.378684] xen: registering gsi 46 triggering 0 polarity 1 [ 68.378685] Already setup the GSI :46 [ 68.378973] xen: registering gsi 46 triggering 0 polarity 1 [ 68.378974] Already setup the GSI :46 [ 68.379116] xen: registering gsi 46 triggering 0 polarity 1 [ 68.379118] Already setup the GSI :46 [ 68.380748] xen: registering gsi 46 triggering 0 polarity 1 [ 68.380753] Already setup the GSI :46 [ 68.380975] pciback 0000:07:00.0: Driver tried to write to a read-only configuration space field at offset 0x52, size 2. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 68.382389] pciback 0000:00:12.2: enabling device (0000 -> 0002) [ 68.382452] xen: registering gsi 17 triggering 0 polarity 1 [ 68.382455] Already setup the GSI :17 [ 68.382598] xen: registering gsi 17 triggering 0 polarity 1 [ 68.382600] Already setup the GSI :17 [ 68.382729] xen: registering gsi 17 triggering 0 polarity 1 [ 68.382730] Already setup the GSI :17 [ 68.383801] xen: registering gsi 17 triggering 0 polarity 1 [ 68.383803] Already setup the GSI :17 [ 68.391533] xen: registering gsi 17 triggering 0 polarity 1 [ 68.391539] Already setup the GSI :17 [ 68.391671] xen: registering gsi 17 triggering 0 polarity 1 [ 68.391673] Already setup the GSI :17 [ 68.392017] xen: registering gsi 17 triggering 0 polarity 1 [ 68.392018] Already setup the GSI :17 [ 68.396691] pciback 0000:00:12.2: Driver tried to write to a read-only configuration space field at offset 0xa4, size 4. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 68.401474] usb 6-3: USB disconnect, device number 2 [ 68.552472] usb 6-5: USB disconnect, device number 3 [ 82.304725] loop5: p1 p2 [ 86.720443] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 86.753640] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 86.771739] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 86.787126] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 92.325519] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none [ 92.325524] vgaarb: device changed decodes: PCI:0000:09:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 251.474199] loop7: p1 p2 [ 255.295075] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 255.311812] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 255.332281] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 255.349588] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 277.822266] loop11: p1 p2 [ 280.281233] hrtimer: interrupt took 41420534 ns [ 281.598351] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 281.629952] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 281.648402] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 281.667582] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 523.731485] loop13: p1 p2 [ 528.103414] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 528.121536] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 528.141347] xen-blkback:ring-ref 11, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 528.164869] xen-blkback:ring-ref 12, event-channel 18, protocol 1 (x86_64-abi) persistent grants