[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [xen-4.6-ARM][Renesas-Lager Board] Fail to enter rootfs on DOM0 after setting XEN

Hello, Thanks.

First of all, would you let me know how to check "the netwok device id fully working on xen"?


2015-10-29 20:58 GMT+09:00 Julien Grall <julien.grall@xxxxxxxxxx>:
On 29/10/15 09:35, ììí wrote:
> Hello,


> After setting xen, DOM0 stop before find rootfs. In case of without-xen,
> rootfs was found. But In case of with-xen, DOM0 was hold with bootargs
> like below.
> xen,dom0-bootargs = "console=hvc0 earlyprintk=xen debug ignore_loglevel
> vmalloc=384M video=HDMI-A-1:1920x1080-32@60
> ip=
> root=/dev/nfs rw nfsroot=, nfsvers=3
> rootdelay clk_ignore_unused";

Before trying to use an NFS rootfs, did you check that the network
device is fully working on Xen?

If not, I would advice to start by looking at this before trying more
complex setup.


Julien Grall

Happy Virus....
ì ìíÂ
Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.