[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Adaptec (PMC Sierra) RAID controller is not working under XEN


  • To: xen-users@xxxxxxxxxxxxx
  • From: Alex Wakizashi <alex@xxxxxxxxxxxxxx>
  • Date: Wed, 29 Jun 2016 01:38:41 +0300
  • Delivery-date: Tue, 28 Jun 2016 22:40:02 +0000
  • List-id: Xen user discussion <xen-users.lists.xen.org>

Hello, all,

Have old Supermicro server with 55xx chipset, and tried to use it as server for virtual machines.
System have only SATA2 onboard, so I've used spare Adaptec RAID controller in HBA mode (Using ZFS, so no need to use it's hw RAID capabilities).
Server is remote-controlled over IPMI (placed at colocation), so I have cryptsetup and dropbear installed in initramfs.
OS is Debian Jessie 8.5.

Have tried both standard Jessie kernel (3.16), and backported (just recompiled from .dsc) kernel from SID (4.6.2).
There are no difference in work with XEN - both always hang at Adaptec adapter initialization.
Without XEN both are working (Except for extremely poor disk performance in 3.16, but that's a different story, maybe related to chipset bug).
Have tried XEN 4.4 (from Jessie) and 4.6 (compiled manually) - no difference.

While looking for solution, I've found this link: http://support.citrix.com/article/CTX136517
This is article about broken 55xx chipset versions, and yes - it's exactly the case.
Spec update: 5520-and-5500-chipset-ioh-specification-update.pdf

Recommendation was to disable interrupt remapping for XEN and for Linux kernel... but that does not work.

Also, I've tried to disable IOMMU completely (Both for kernel and for Xen, as well as disable VT-d and IO/AT in BIOS) - and that does not work either.

In general, I don't need IOMMU of VT-d, just need to run few Debian VMs in HVM(preferable) or PV/PVH mode...

Situation looks very similar to some Marvell SATA controllers, which are refusing to work with XEN as well... AFAIK, there is no solution for it so far.

Does anyone have advice - how to make it working?
Or maybe there is recommended model of HBA/RAID controller, which are known to work correctly with buggy 5520 chipset?

Here is lspci output:

- Cut -# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22)
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22)
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22)
00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 [8086:340c] (rev 22)
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 22)
00:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 22)
00:13.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 22)
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 22)
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 22)
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 22)
00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 22)
00:16.0 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3430] (rev 22)
00:16.1 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3431] (rev 22)
00:16.2 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3432] (rev 22)
00:16.3 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3433] (rev 22)
00:16.4 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3429] (rev 22)
00:16.5 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342a] (rev 22)
00:16.6 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342b] (rev 22)
00:16.7 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342c] (rev 22)
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22]
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
01:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
01:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
06:00.0 RAID bus controller [0104]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
07:01.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a)
fe:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02)
fe:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02)
fe:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02)
fe:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02)
fe:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02)
fe:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02)
fe:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02)
fe:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02)
fe:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02)
fe:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02)
fe:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02)
fe:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02)
fe:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02)
fe:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02)
fe:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
fe:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
fe:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02)
fe:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02)
fe:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
fe:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
fe:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02)
fe:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02)
fe:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
fe:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02)
ff:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02)
ff:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02)
ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02)
ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02)
ff:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02)
ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02)
ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02)
ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02)
ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02)
ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02)
ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02)
ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02)
ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
- Cut -

Here is GRUB config:
- Cut -

GRUB_CMDLINE_LINUX_DEFAULT="ip=XXX::XXX:XXX:xxx.foo.com:eth0:none nointremap"

GRUB_CMDLINE_XEN="iommu=no-intremap dom0_mem=16384M dom0_max_vcpus=8 dom0_vcpus_pin"
- Cut -

Here is a dmesg output (after initramfs loaded):
- Cut -
~ # dmesg
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WC  WP  UC  UC
[    0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.2-2+bpo4w2 (2016-06-28)
[    0.000000] Command line: placeholder root=UUID=337de886-19d2-4a6d-804e-41e56af4b13a ro ip=XXXXX::XXXXX:XX:XXXXXX:eth0:none intel_iommu=off iommu=off quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] Released 0 page(s)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] Xen: [mem 0x0000000000000000-0x0000000000093fff] usable
[    0.000000] Xen: [mem 0x0000000000094800-0x00000000000fffff] reserved
[    0.000000] Xen: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[    0.000000] Xen: [mem 0x00000000bf78e000-0x00000000bf78ffff] type 9
[    0.000000] Xen: [mem 0x00000000bf790000-0x00000000bf79dfff] ACPI data
[    0.000000] Xen: [mem 0x00000000bf79e000-0x00000000bf7cffff] ACPI NVS
[    0.000000] Xen: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[    0.000000] Xen: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[    0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] Xen: [mem 0x00000000fbffe000-0x00000000fbffefff] reserved
[    0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] Xen: [mem 0x00000000fec8a000-0x00000000fec8afff] reserved
[    0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] Xen: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] Xen: [mem 0x0000000100000000-0x0000000c3fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Supermicro X8DTU/X8DTU, BIOS 2.1c       08/03/2012
[    0.000000] Hypervisor detected: Xen
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xc40000 max_arch_pfn = 0x400000000
[    0.000000] MTRR: Disabled
[    0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000008e000] 8e000 size 24576
[    0.000000] BRK [0x01d4c000, 0x01d4cfff] PGTABLE
[    0.000000] BRK [0x01d4d000, 0x01d4dfff] PGTABLE
[    0.000000] BRK [0x01d4e000, 0x01d4efff] PGTABLE
[    0.000000] BRK [0x01d4f000, 0x01d4ffff] PGTABLE
[    0.000000] BRK [0x01d50000, 0x01d50fff] PGTABLE
[    0.000000] BRK [0x01d51000, 0x01d51fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x02000000-0x031f3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FACE0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BF790100 00008C (v01 SMCI            20120803 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BF790290 0000F4 (v04 080312 FACP1521 20120803 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20160108/tbfadt-623)
[    0.000000] ACPI: DSDT 0x00000000BF7906A0 006580 (v02 10600  10600000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BF79E000 000040
[    0.000000] ACPI: FACS 0x00000000BF79E000 000040
[    0.000000] ACPI: APIC 0x00000000BF790390 00011E (v02 080312 APIC1521 20120803 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BF7904B0 00003C (v01 080312 OEMMCFG  20120803 MSFT 00000097)
[    0.000000] ACPI: SLIT 0x00000000BF7904F0 000030 (v01 080312 OEMSLIT  20120803 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BF79E040 000086 (v01 080312 OEMB1521 20120803 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000BF79A6A0 000250 (v02 080312 OEMSRAT  00000001 INTL 00000001)
[    0.000000] ACPI: HPET 0x00000000BF79A8F0 000038 (v01 080312 OEMHPET  20120803 MSFT 00000097)
[    0.000000] ACPI: RMAD 0x00000000BF79E0D0 000130 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BF7A35F0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.000000] ACPI: EINJ 0x00000000BF79A930 000130 (v01 AMIER  AMI_EINJ 20120803 MSFT 00000097)
[    0.000000] ACPI: BERT 0x00000000BF79AAC0 000030 (v01 AMIER  AMI_BERT 20120803 MSFT 00000097)
[    0.000000] ACPI: ERST 0x00000000BF79AAF0 0001B0 (v01 AMIER  AMI_ERST 20120803 MSFT 00000097)
[    0.000000] ACPI: HEST 0x00000000BF79ACA0 0000A8 (v01 AMIER  ABC_HEST 20120803 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Setting APIC routing to Xen PV.
[    0.000000] NUMA turned off
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000c3fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x3f9fe6000-0x3f9feafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000c3fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf77ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000c3fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c3fffffff]
[    0.000000] On node 0 totalpages: 12580627
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3987 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12190 pages used for memmap
[    0.000000]   DMA32 zone: 780160 pages, LIFO batch:31
[    0.000000]   Normal zone: 184320 pages used for memmap
[    0.000000]   Normal zone: 11796480 pages, LIFO batch:31
[    0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[    0.000000] Remapped 264428 page(s)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf78ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf790000-0xbf79dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf79e000-0xbf7cffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfbffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfbffe000-0xfbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xfbfff000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec89fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec8a000-0xfec8afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec8b000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.6.0 (preserve-AD)
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff880440200000 s94808 r8192 d32168 u262144
[    0.000000] pcpu-alloc: s94808 r8192 d32168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
[    0.000000] xen: PV spinlocks enabled
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 12384032
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: placeholder root=UUID=337de886-19d2-4a6d-804e-41e56af4b13a ro ip=95.213.214.218::95.213.214.217:255.255.255.248:jet.iqint.ru:eth0:none intel_iommu=off iommu=off quiet
[    0.000000] DMAR: IOMMU disabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0x43c200000-0x440200000] (64MB) mapped at [ffff88043c200000-ffff8804401fffff]
[    0.000000] Memory: 15690448K/50322508K available (5940K kernel code, 1160K rwdata, 2712K rodata, 1348K init, 828K bss, 34632060K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] Using NULL legacy PIC
[    0.000000] NR_IRQS:33024 nr_irqs:896 0
[    0.000000] xen:events: Using FIFO-based ABI
[    0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[    0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[    0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[    0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[    0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[    0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[    0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[    0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[    0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[    0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[    0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[    0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[    0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[    0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[    0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] tsc: Detected 2400.150 MHz processor
[   11.172009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.30 BogoMIPS (lpj=9600600)
[   11.172012] pid_max: default: 32768 minimum: 301
[   11.172028] ACPI: Core revision 20160108
[   11.178074] ACPI: 2 ACPI AML tables successfully acquired and loaded
[   11.178076]
[   11.178340] Security Framework initialized
[   11.178343] Yama: disabled by default; enable with sysctl kernel.yama.*
[   11.178350] AppArmor: AppArmor disabled by boot time parameter
[   11.186386] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[   11.202032] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[   11.209209] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.209357] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.210384] Disabling memory control group subsystem
[   11.210446] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[   11.210447] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[   11.210450] CPU: Physical Processor ID: 0
[   11.210451] CPU: Processor Core ID: 0
[   11.210454] mce: CPU supports 2 MCE banks
[   11.210469] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[   11.210470] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[   11.210736] Freeing SMP alternatives memory: 24K (ffffffff81c75000 - ffffffff81c7b000)
[   11.235712] ftrace: allocating 24456 entries in 96 pages
[   11.245413] cpu 0 spinlock event irq 49
[   11.245420] smpboot: Max logical packages: 2
[   11.245424] smpboot: APIC(0) Converting physical 0 to logical package 0
[   11.245432] Could not initialize VPMU for cpu 0, error -95
[   11.245458] Performance Events: 16-deep LBR, Westmere events, Broken PMU hardware detected, using software events only.
[   11.245476] 6Failed to access perfctr msr (MSR c4 is 0)
[   11.246048] NMI watchdog: disabled (cpu0): hardware events not enabled
[   11.246050] NMI watchdog: Shutting down hard lockup detector on all cpus
[   11.246167] installing Xen timer for CPU 1
[   11.246179] cpu 1 spinlock event irq 56
[   11.247631] installing Xen timer for CPU 2
[   11.247642] cpu 2 spinlock event irq 63
[   11.249144] installing Xen timer for CPU 3
[   11.249155] cpu 3 spinlock event irq 70
[   11.250492] installing Xen timer for CPU 4
[   11.250502] cpu 4 spinlock event irq 77
[   11.251705] installing Xen timer for CPU 5
[   11.251716] cpu 5 spinlock event irq 84
[   11.252912] installing Xen timer for CPU 6
[   11.252922] cpu 6 spinlock event irq 91
[   11.254130] installing Xen timer for CPU 7
[   11.254140] cpu 7 spinlock event irq 98
[   11.255239] x86: Booted up 1 node, 8 CPUs
[   11.257235] devtmpfs: initialized
[   11.257298] x86/mm: Memory block size: 128MB
[   11.265484] PM: Registering ACPI NVS region [mem 0xbf79e000-0xbf7cffff] (204800 bytes)
[   11.265586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[   11.265726] pinctrl core: initialized pinctrl subsystem
[   11.265999] NET: Registered protocol family 16
[   11.266012] xen:grant_table: Grant tables using version 1 layout
[   11.266021] Grant table initialized
[   11.266502] ACPI: bus type PCI registered
[   11.266505] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   11.266998] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[   11.267001] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[   11.292918] PCI: Using configuration type 1 for base access
[   11.305341] ACPI: Added _OSI(Module Device)
[   11.305344] ACPI: Added _OSI(Processor Device)
[   11.305345] ACPI: Added _OSI(3.0 _SCP Extensions)
[   11.305346] ACPI: Added _OSI(Processor Aggregator Device)
[   11.305512] xen: registering gsi 9 triggering 0 polarity 0
[   11.305721] ACPI: Executed 1 blocks of module-level executable AML code
[   11.312031] ACPI: Dynamic OEM Table Load:
[   11.312051] ACPI: SSDT 0xFFFF880435158000 00477C (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[   11.314929] ACPI: Dynamic OEM Table Load:
[   11.314950] ACPI: SSDT 0xFFFF880435154000 000C69 (v01 PmRef  P001Cst  00003001 INTL 20051117)
[   11.315939] ACPI: Interpreter enabled
[   11.315955] ACPI: (supports S0 S1 S4 S5)
[   11.315957] ACPI: Using IOAPIC for interrupt routing
[   11.316029] HEST: Table parsing has been initialized.
[   11.316032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   11.324223] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[   11.324229] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[   11.324547] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[   11.324849] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[   11.325137] acpi PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xfed8ffff window]; [mem 0xfed40000-0xfed44fff] ignored
[   11.325382] PCI host bridge to bus 0000:00
[   11.325385] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[   11.325387] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[   11.325389] pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb window]
[   11.325390] pci_bus 0000:00: root bus resource [io  0x03c0-0x03df window]
[   11.325392] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff window]
[   11.325394] pci_bus 0000:00: root bus resource [io  0xf000-0xffff window]
[   11.325396] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[   11.325398] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[   11.325400] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[   11.325402] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[   11.325404] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.325423] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[   11.325536] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[   11.325672] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[   11.325787] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[   11.325858] pci 0000:00:01.0: System wakeup disabled by ACPI
[   11.325932] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[   11.326039] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[   11.326106] pci 0000:00:03.0: System wakeup disabled by ACPI
[   11.326180] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
[   11.326284] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[   11.326350] pci 0000:00:05.0: System wakeup disabled by ACPI
[   11.326423] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[   11.326529] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[   11.326597] pci 0000:00:07.0: System wakeup disabled by ACPI
[   11.326674] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[   11.326788] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[   11.326866] pci 0000:00:09.0: System wakeup disabled by ACPI
[   11.326947] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
[   11.326967] pci 0000:00:13.0: reg 0x10: [mem 0xfec8a000-0xfec8afff]
[   11.327073] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[   11.327184] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[   11.327378] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[   11.327567] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[   11.327749] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[   11.327921] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
[   11.327947] pci 0000:00:16.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff 64bit]
[   11.328159] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
[   11.328191] pci 0000:00:16.1: reg 0x10: [mem 0xfbef4000-0xfbef7fff 64bit]
[   11.328409] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
[   11.328435] pci 0000:00:16.2: reg 0x10: [mem 0xfbef0000-0xfbef3fff 64bit]
[   11.328645] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
[   11.328671] pci 0000:00:16.3: reg 0x10: [mem 0xfbeec000-0xfbeeffff 64bit]
[   11.328881] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
[   11.328906] pci 0000:00:16.4: reg 0x10: [mem 0xfbee8000-0xfbeebfff 64bit]
[   11.329115] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
[   11.329141] pci 0000:00:16.5: reg 0x10: [mem 0xfbee4000-0xfbee7fff 64bit]
[   11.329351] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
[   11.329376] pci 0000:00:16.6: reg 0x10: [mem 0xfbee0000-0xfbee3fff 64bit]
[   11.329586] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
[   11.329611] pci 0000:00:16.7: reg 0x10: [mem 0xfbedc000-0xfbedffff 64bit]
[   11.329823] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[   11.329899] pci 0000:00:1a.0: reg 0x20: [io  0xcc00-0xcc1f]
[   11.330041] pci 0000:00:1a.0: System wakeup disabled by ACPI
[   11.330105] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[   11.330180] pci 0000:00:1a.1: reg 0x20: [io  0xc880-0xc89f]
[   11.330315] pci 0000:00:1a.1: System wakeup disabled by ACPI
[   11.330377] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[   11.330453] pci 0000:00:1a.2: reg 0x20: [io  0xc800-0xc81f]
[   11.330587] pci 0000:00:1a.2: System wakeup disabled by ACPI
[   11.330660] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[   11.330691] pci 0000:00:1a.7: reg 0x10: [mem 0xfbeda000-0xfbeda3ff]
[   11.330849] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[   11.330910] pci 0000:00:1a.7: System wakeup disabled by ACPI
[   11.330975] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[   11.331051] pci 0000:00:1d.0: reg 0x20: [io  0xc480-0xc49f]
[   11.331185] pci 0000:00:1d.0: System wakeup disabled by ACPI
[   11.331247] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[   11.331322] pci 0000:00:1d.1: reg 0x20: [io  0xc400-0xc41f]
[   11.331456] pci 0000:00:1d.1: System wakeup disabled by ACPI
[   11.331517] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[   11.331592] pci 0000:00:1d.2: reg 0x20: [io  0xc080-0xc09f]
[   11.331727] pci 0000:00:1d.2: System wakeup disabled by ACPI
[   11.331801] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[   11.331831] pci 0000:00:1d.7: reg 0x10: [mem 0xfbed8000-0xfbed83ff]
[   11.331978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[   11.332037] pci 0000:00:1d.7: System wakeup disabled by ACPI
[   11.332095] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[   11.332241] pci 0000:00:1e.0: System wakeup disabled by ACPI
[   11.332305] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[   11.332433] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[   11.332440] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[   11.332444] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[   11.332448] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff)
[   11.332452] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1640 (mask 000f)
[   11.332456] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[   11.332604] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[   11.332632] pci 0000:00:1f.2: reg 0x10: [io  0xb480-0xb487]
[   11.332646] pci 0000:00:1f.2: reg 0x14: [io  0xc000-0xc003]
[   11.332660] pci 0000:00:1f.2: reg 0x18: [io  0xbc00-0xbc07]
[   11.332673] pci 0000:00:1f.2: reg 0x1c: [io  0xb880-0xb883]
[   11.332687] pci 0000:00:1f.2: reg 0x20: [io  0xb800-0xb81f]
[   11.332701] pci 0000:00:1f.2: reg 0x24: [mem 0xfbed6000-0xfbed67ff]
[   11.332782] pci 0000:00:1f.2: PME# supported from D3hot
[   11.332891] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[   11.332918] pci 0000:00:1f.3: reg 0x10: [mem 0xfbed4000-0xfbed40ff 64bit]
[   11.332956] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[   11.333166] pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000
[   11.333190] pci 0000:01:00.0: reg 0x10: [mem 0xfbbe0000-0xfbbfffff]
[   11.333205] pci 0000:01:00.0: reg 0x14: [mem 0xfbbc0000-0xfbbdffff]
[   11.333220] pci 0000:01:00.0: reg 0x18: [io  0xdc00-0xdc1f]
[   11.333235] pci 0000:01:00.0: reg 0x1c: [mem 0xfbb9c000-0xfbb9ffff]
[   11.333277] pci 0000:01:00.0: reg 0x30: [mem 0xfbba0000-0xfbbbffff pref]
[   11.333382] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[   11.333437] pci 0000:01:00.0: reg 0x184: [mem 0xfbb60000-0xfbb63fff 64bit]
[   11.333440] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0xfbb60000-0xfbb7ffff 64bit] (contains BAR0 for 8 VFs)
[   11.333465] pci 0000:01:00.0: reg 0x190: [mem 0xfbb40000-0xfbb43fff 64bit]
[   11.333467] pci 0000:01:00.0: VF(n) BAR3 space: [mem 0xfbb40000-0xfbb5ffff 64bit] (contains BAR3 for 8 VFs)
[   11.333618] pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000
[   11.333642] pci 0000:01:00.1: reg 0x10: [mem 0xfbb20000-0xfbb3ffff]
[   11.333657] pci 0000:01:00.1: reg 0x14: [mem 0xfbb00000-0xfbb1ffff]
[   11.333672] pci 0000:01:00.1: reg 0x18: [io  0xd880-0xd89f]
[   11.333687] pci 0000:01:00.1: reg 0x1c: [mem 0xfbadc000-0xfbadffff]
[   11.333728] pci 0000:01:00.1: reg 0x30: [mem 0xfbae0000-0xfbafffff pref]
[   11.333832] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[   11.333880] pci 0000:01:00.1: reg 0x184: [mem 0xfbaa0000-0xfbaa3fff 64bit]
[   11.333882] pci 0000:01:00.1: VF(n) BAR0 space: [mem 0xfbaa0000-0xfbabffff 64bit] (contains BAR0 for 8 VFs)
[   11.333907] pci 0000:01:00.1: reg 0x190: [mem 0xfba80000-0xfba83fff 64bit]
[   11.333909] pci 0000:01:00.1: VF(n) BAR3 space: [mem 0xfba80000-0xfba9ffff 64bit] (contains BAR3 for 8 VFs)
[   11.343025] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[   11.343034] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[   11.343042] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbbfffff]
[   11.343139] pci 0000:00:03.0: PCI bridge to [bus 03]
[   11.343217] pci 0000:00:05.0: PCI bridge to [bus 04]
[   11.343310] pci 0000:00:07.0: PCI bridge to [bus 05]
[   11.343405] pci 0000:06:00.0: [9005:028d] type 00 class 0x010400
[   11.343433] pci 0000:06:00.0: reg 0x10: [mem 0xfbd00000-0xfbdfffff 64bit]
[   11.343453] pci 0000:06:00.0: reg 0x18: [mem 0xfbc7e000-0xfbc7e3ff 64bit]
[   11.343467] pci 0000:06:00.0: reg 0x20: [io  0xe800-0xe8ff]
[   11.343492] pci 0000:06:00.0: reg 0x30: [mem 0xfbc80000-0xfbcfffff pref]
[   11.343579] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[   11.351124] pci 0000:00:09.0: PCI bridge to [bus 06]
[   11.351134] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[   11.351141] pci 0000:00:09.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
[   11.351233] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000
[   11.351260] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]
[   11.351276] pci 0000:07:01.0: reg 0x14: [mem 0xfaffc000-0xfaffffff]
[   11.351291] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff]
[   11.351514] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[   11.351523] pci 0000:00:1e.0:   bridge window [mem 0xfaf00000-0xfb7fffff]
[   11.351532] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[   11.351534] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[   11.351536] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[   11.351538] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb window] (subtractive decode)
[   11.351539] pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df window] (subtractive decode)
[   11.351541] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff window] (subtractive decode)
[   11.351543] pci 0000:00:1e.0:   bridge window [io  0xf000-0xffff window] (subtractive decode)
[   11.351545] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[   11.351547] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[   11.351549] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[   11.351550] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[   11.351619] pci_bus 0000:00: on NUMA node 0
[   11.351806] xen: registering gsi 13 triggering 1 polarity 0
[   11.352211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[   11.352283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 *14 15)
[   11.352352] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[   11.352421] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[   11.352501] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[   11.352573] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[   11.352641] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[   11.352711] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
[   11.352775] ACPI: Enabled 1 GPEs in block 00 to 3F
[   11.352814] xen:balloon: Initialising balloon driver
[   11.715956] xen_balloon: Initialising balloon driver
[   11.716140] vgaarb: setting as boot device: PCI:0000:07:01.0
[   11.716144] vgaarb: device added: PCI:0000:07:01.0,decodes=io+mem,owns=io+mem,locks=none
[   11.716145] vgaarb: loaded
[   11.716147] vgaarb: bridge control possible 0000:07:01.0
[   11.716476] PCI: Using ACPI for IRQ routing
[   11.729403] PCI: Discovered peer bus fe
[   11.729405] PCI: root bus fe: using default resources
[   11.729407] PCI: Probing PCI hardware (bus fe)
[   11.729448] ACPI: \: failed to evaluate _DSM (0x1001)
[   11.729449] PCI host bridge to bus 0000:fe
[   11.729452] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]
[   11.729454] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[   11.729456] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[   11.729459] pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[   11.729471] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
[   11.729583] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
[   11.729683] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
[   11.729773] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
[   11.729862] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
[   11.729951] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
[   11.730042] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
[   11.730131] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
[   11.730222] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
[   11.730311] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
[   11.730399] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
[   11.730489] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
[   11.730582] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
[   11.730671] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
[   11.730763] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
[   11.730853] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
[   11.730949] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
[   11.731038] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
[   11.731126] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
[   11.731227] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
[   11.731324] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
[   11.731413] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
[   11.731502] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
[   11.731591] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
[   11.731716] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
[   11.731718] pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[   11.731728] PCI: Discovered peer bus ff
[   11.731729] PCI: root bus ff: using default resources
[   11.731730] PCI: Probing PCI hardware (bus ff)
[   11.731759] ACPI: \: failed to evaluate _DSM (0x1001)
[   11.731761] PCI host bridge to bus 0000:ff
[   11.731762] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[   11.731764] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
[   11.731766] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[   11.731768] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[   11.731778] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
[   11.731877] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
[   11.731972] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
[   11.732058] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
[   11.732145] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
[   11.732231] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
[   11.732318] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
[   11.732404] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
[   11.732492] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
[   11.732578] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
[   11.732664] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
[   11.732750] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
[   11.732839] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
[   11.732925] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
[   11.733010] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
[   11.733095] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
[   11.733186] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
[   11.733271] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
[   11.733357] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
[   11.733442] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
[   11.733533] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
[   11.733621] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
[   11.733707] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
[   11.733792] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
[   11.733912] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[   11.733915] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[   11.733922] PCI: pci_cache_line_size set to 64 bytes
[   11.734184] e820: reserve RAM buffer [mem 0x00094000-0x0009ffff]
[   11.734185] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[   11.734766] clocksource: Switched to clocksource xen
[   11.741826] VFS: Disk quotas dquot_6.6.0
[   11.741884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   11.741932] hugetlbfs: disabling because there are no supported hugepage sizes
[   11.741993] pnp: PnP ACPI init
[   11.742084] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[   11.742088] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[   11.742177] xen: registering gsi 8 triggering 1 polarity 0
[   11.742206] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[   11.742384] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[   11.742388] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[   11.742597] xen: registering gsi 4 triggering 1 polarity 0
[   11.742605] pnp 00:03: [dma 0 disabled]
[   11.742662] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[   11.742876] xen: registering gsi 3 triggering 1 polarity 0
[   11.742883] pnp 00:04: [dma 0 disabled]
[   11.742940] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[   11.743187] system 00:05: [io  0x0ca2-0x0ca3] has been reserved
[   11.743190] system 00:05: [io  0x0cf8-0x0cff] could not be reserved
[   11.743192] system 00:05: [io  0x04d0-0x04d1] has been reserved
[   11.743194] system 00:05: [io  0x0800-0x087f] could not be reserved
[   11.743196] system 00:05: [io  0x0500-0x057f] could not be reserved
[   11.743199] system 00:05: [mem 0x00000400-0x000004ff] could not be reserved
[   11.743201] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[   11.743204] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[   11.743206] system 00:05: [mem 0xfed40000-0xfed8ffff] has been reserved
[   11.743209] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[   11.743409] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[   11.743412] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[   11.743415] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[   11.743530] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[   11.743533] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[   11.743730] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[   11.743733] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[   11.743735] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[   11.743739] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[   11.743885] pnp: PnP ACPI: found 9 devices
[   11.752041] PM-Timer failed consistency check  (0xffffff) - aborting.
[   11.752127] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[   11.752130] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[   11.752134] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[   11.752141] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbbfffff]
[   11.752152] pci 0000:00:03.0: PCI bridge to [bus 03]
[   11.752168] pci 0000:00:05.0: PCI bridge to [bus 04]
[   11.752184] pci 0000:00:07.0: PCI bridge to [bus 05]
[   11.752200] pci 0000:00:09.0: PCI bridge to [bus 06]
[   11.752203] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[   11.752210] pci 0000:00:09.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
[   11.752222] pci 0000:00:1e.0: PCI bridge to [bus 07]
[   11.752229] pci 0000:00:1e.0:   bridge window [mem 0xfaf00000-0xfb7fffff]
[   11.752234] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[   11.752244] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[   11.752245] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[   11.752247] pci_bus 0000:00: resource 6 [io  0x03b0-0x03bb window]
[   11.752249] pci_bus 0000:00: resource 7 [io  0x03c0-0x03df window]
[   11.752250] pci_bus 0000:00: resource 8 [io  0x0d00-0xefff window]
[   11.752252] pci_bus 0000:00: resource 9 [io  0xf000-0xffff window]
[   11.752254] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[   11.752256] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000dffff window]
[   11.752257] pci_bus 0000:00: resource 12 [mem 0xc0000000-0xdfffffff window]
[   11.752259] pci_bus 0000:00: resource 13 [mem 0xf0000000-0xfed8ffff window]
[   11.752261] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[   11.752263] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff]
[   11.752265] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[   11.752266] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbdfffff]
[   11.752268] pci_bus 0000:07: resource 1 [mem 0xfaf00000-0xfb7fffff]
[   11.752270] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
[   11.752272] pci_bus 0000:07: resource 4 [io  0x0000-0x03af window]
[   11.752273] pci_bus 0000:07: resource 5 [io  0x03e0-0x0cf7 window]
[   11.752275] pci_bus 0000:07: resource 6 [io  0x03b0-0x03bb window]
[   11.752277] pci_bus 0000:07: resource 7 [io  0x03c0-0x03df window]
[   11.752278] pci_bus 0000:07: resource 8 [io  0x0d00-0xefff window]
[   11.752280] pci_bus 0000:07: resource 9 [io  0xf000-0xffff window]
[   11.752282] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window]
[   11.752284] pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000dffff window]
[   11.752285] pci_bus 0000:07: resource 12 [mem 0xc0000000-0xdfffffff window]
[   11.752287] pci_bus 0000:07: resource 13 [mem 0xf0000000-0xfed8ffff window]
[   11.752291] pci_bus 0000:fe: resource 4 [io  0x0000-0xffff]
[   11.752293] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[   11.752298] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[   11.752299] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
[   11.752493] NET: Registered protocol family 2
[   11.753372] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[   11.754407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   11.754564] TCP: Hash tables configured (established 524288 bind 65536)
[   11.754718] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[   11.755038] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[   11.755431] NET: Registered protocol family 1
[   11.755622] xen: registering gsi 16 triggering 0 polarity 1
[   11.755638] xen: --> pirq=16 -> irq=16 (gsi=16)
[   11.755878] xen: registering gsi 21 triggering 0 polarity 1
[   11.755885] xen: --> pirq=21 -> irq=21 (gsi=21)
[   11.756118] xen: registering gsi 19 triggering 0 polarity 1
[   11.756125] xen: --> pirq=19 -> irq=19 (gsi=19)
[   11.756360] xen: registering gsi 18 triggering 0 polarity 1
[   11.756368] xen: --> pirq=18 -> irq=18 (gsi=18)
[   11.756618] xen: registering gsi 23 triggering 0 polarity 1
[   11.756627] xen: --> pirq=23 -> irq=23 (gsi=23)
[   11.756860] xen: registering gsi 19 triggering 0 polarity 1
[   11.756862] Already setup the GSI :19
[   11.757091] xen: registering gsi 18 triggering 0 polarity 1
[   11.757093] Already setup the GSI :18
[   11.757324] xen: registering gsi 23 triggering 0 polarity 1
[   11.757326] Already setup the GSI :23
[   11.757490] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[   11.757597] PCI: CLS 256 bytes, default 64
[   11.757653] Unpacking initramfs...
[   12.124493] Freeing initrd memory: 18384K (ffff880002000000 - ffff8800031f4000)
[   12.125188] futex hash table entries: 2048 (order: 5, 131072 bytes)
[   12.125324] audit: initializing netlink subsys (disabled)
[   12.125346] audit: type=2000 audit(1467157831.594:1): initialized
[   12.125685] Initialise system trusted keyring
[   12.125978] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[   12.126002] zbud: loaded
[   12.183978] Key type asymmetric registered
[   12.183983] Asymmetric key parser 'x509' registered
[   12.184098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[   12.184172] io scheduler noop registered
[   12.184176] io scheduler deadline registered
[   12.184241] io scheduler cfq registered (default)
[   12.185114] aer 0000:00:01.0:pcie02: service driver aer loaded
[   12.185152] aer 0000:00:03.0:pcie02: service driver aer loaded
[   12.185190] aer 0000:00:05.0:pcie02: service driver aer loaded
[   12.185227] aer 0000:00:07.0:pcie02: service driver aer loaded
[   12.185266] aer 0000:00:09.0:pcie02: service driver aer loaded
[   12.185289] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[   12.185291] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[   12.185293] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[   12.185298] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[   12.185311] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[   12.185317] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[   12.185330] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[   12.185335] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[   12.185348] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[   12.185353] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[   12.185366] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[   12.185368] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[   12.185373] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[   12.185380] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.185388] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   12.185407] intel_idle: MWAIT substates: 0x1120
[   12.185409] intel_idle: v0.4.1 model 0x2C
[   12.185412] intel_idle: intel_idle yielding to none
[   12.185482] ERST: Failed to get Error Log Address Range.
[   12.185567] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[   12.185585] GHES: Failed to enable APEI firmware first mode.
[   12.187564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   12.208128] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   12.228803] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   12.229419] hpet_acpi_add: no address or irqs in _CRS
[   12.229433] Linux agpgart interface v0.103
[   12.229540] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[   12.229541] AMD IOMMUv2 functionality not available on this system
[   12.230509] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   12.233461] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.233467] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.233764] mousedev: PS/2 mouse device common for all mice
[   12.233830] rtc_cmos 00:01: RTC can wake from S4
[   12.234116] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[   12.234154] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[   12.234174] ledtrig-cpu: registered to indicate activity on CPUs
[   12.235049] NET: Registered protocol family 10
[   12.235376] mip6: Mobile IPv6
[   12.235380] NET: Registered protocol family 17
[   12.235388] mpls_gso: MPLS GSO support
[   12.235642] mce: Unable to init device /dev/mcelog (rc: -16)
[   12.235743] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x15
[   12.235757] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x15
[   12.235810] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x15
[   12.235826] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x15
[   12.235838] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x15
[   12.235849] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x15
[   12.235861] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x15
[   12.235872] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x15
[   12.236056] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[   12.236393] registered taskstats version 1
[   12.236407] Loading compiled-in X.509 certificates
[   12.240324] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[   12.240806] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[   12.240842] zswap: loaded using pool lzo/zbud
[   12.241926] rtc_cmos 00:01: setting system clock to 2016-06-28 23:50:30 UTC (1467157830)
[   12.242009] PM: Hibernation image not present or could not be loaded.
[   12.242694] Freeing unused kernel memory: 1348K (ffffffff81b24000 - ffffffff81c75000)
[   12.242695] Write protecting the kernel read-only data: 10240k
[   12.245309] Freeing unused kernel memory: 188K (ffff8800015d1000 - ffff880001600000)
[   12.246024] Freeing unused kernel memory: 1384K (ffff8800018a6000 - ffff880001a00000)
[   12.246031] ------------[ cut here ]------------
[   12.246035] WARNING: CPU: 0 PID: 1 at /home/linux-4.6/linux-4.6.2/arch/x86/mm/dump_pagetables.c:225 note_page+0x639/0x800
[   12.246037] x86/mm: Found insecure W+X mapping at address ffff880000000000/0xffff880000000000
[   12.246038] Modules linked in:
[   12.246041] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-1-amd64 #1 Debian 4.6.2-2+bpo4w2
[   12.246043] Hardware name: Supermicro X8DTU/X8DTU, BIOS 2.1c       08/03/2012
[   12.246044]  0000000000000200 00000000ab2dbb7c ffffffff81312435 ffff880435b97de0
[   12.246047]  0000000000000000 ffffffff8107af94 0000000000000000 ffff880435b97e38
[   12.246049]  8010000000000065 ffff880001a08000 0000880000000000 ffffc00000000fff
[   12.246051] Call Trace:
[   12.246056]  [<ffffffff81312435>] ? dump_stack+0x5c/0x77
[   12.246059]  [<ffffffff8107af94>] ? __warn+0xc4/0xe0
[   12.246061]  [<ffffffff8107b00f>] ? warn_slowpath_fmt+0x5f/0x80
[   12.246064]  [<ffffffff810cedf8>] ? vprintk_emit+0x348/0x4d0
[   12.246066]  [<ffffffff8106cd99>] ? note_page+0x639/0x800
[   12.246068]  [<ffffffff8106d314>] ? ptdump_walk_pgd_level_core+0x3b4/0x3e0
[   12.246072]  [<ffffffff815bb786>] ? kernel_init+0x26/0x100
[   12.246076]  [<ffffffff815c8672>] ? ret_from_fork+0x22/0x40
[   12.246078]  [<ffffffff815bb760>] ? rest_init+0x80/0x80
[   12.246079] ---[ end trace a60ce51a505e7266 ]---
[   12.350832] x86/mm: Checked W+X mappings: FAILED, 4602 W+X pages found.
[   12.419153] systemd-udevd[120]: starting version 215
[   12.419739] random: systemd-udevd urandom read with 44 bits of entropy available
[   12.445373] fjes: module verification failed: signature and/or required key missing - tainting kernel
[   12.445730] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[   12.450460] pps_core: LinuxPPS API ver. 1 registered
[   12.450463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[   12.450884] PTP clock support registered
[   12.451254] dca service started, version 1.12.1
[   12.453184] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   12.453186] igb: Copyright (c) 2007-2014 Intel Corporation.
[   12.453293] xen: registering gsi 28 triggering 0 polarity 1
[   12.453314] xen: --> pirq=28 -> irq=28 (gsi=28)
[   12.454841] SCSI subsystem initialized
[   12.456118] Adaptec aacraid driver 1.2-1[41052]-ms
[   12.456195] xen: registering gsi 32 triggering 0 polarity 1
[   12.456208] ACPI: bus type USB registered
[   12.456209] xen: --> pirq=32 -> irq=32 (gsi=32)
[   12.456251] usbcore: registered new interface driver usbfs
[   12.456268] usbcore: registered new interface driver hub
[   12.456318] usbcore: registered new device driver usb
[   12.457532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.458074] ehci-pci: EHCI PCI platform driver
[   12.458253] xen: registering gsi 18 triggering 0 polarity 1
[   12.458257] Already setup the GSI :18
[   12.458311] ehci-pci 0000:00:1a.7: EHCI Host Controller
[   12.458313] uhci_hcd: USB Universal Host Controller Interface driver
[   12.458319] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   12.458337] ehci-pci 0000:00:1a.7: debug port 1
[   12.458524] libata version 3.00 loaded.
[   12.462259] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[   12.462286] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbeda000
[   12.467761] SSE version of gcm_enc/dec engaged.
[   12.470805] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   12.470883] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   12.470886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.470889] usb usb1: Product: EHCI Host Controller
[   12.470892] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[   12.470895] usb usb1: SerialNumber: 0000:00:1a.7
[   12.471137] hub 1-0:1.0: USB hub found
[   12.471152] hub 1-0:1.0: 6 ports detected
[   12.471636] xen: registering gsi 23 triggering 0 polarity 1
[   12.471643] Already setup the GSI :23
[   12.471695] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   12.471705] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   12.471725] ehci-pci 0000:00:1d.7: debug port 1
[   12.475659] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[   12.475689] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbed8000
[   12.486140] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   12.486563] AAC0: kernel 7.5-0[32033] Jun 28 2014
[   12.486567] AAC0: monitor 7.5-0[32033]
[   12.486569] AAC0: bios 7.5-0[32033]
[   12.486571] AAC0: serial 4C341384DF6
[   12.486572] AAC0: Non-DASD support enabled.
[   12.486574] AAC0: 64bit support enabled.
[   12.486576] AAC0: 64 Bit DAC enabled
[   12.486751] scsi host0: aacraid
[   12.486784] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   12.486936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   12.486940] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.486942] usb usb2: Product: EHCI Host Controller
[   12.486944] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[   12.486945] usb usb2: SerialNumber: 0000:00:1d.7
[   12.487133] hub 2-0:1.0: USB hub found
[   12.487156] hub 2-0:1.0: 6 ports detected
[   12.487711] xen: registering gsi 16 triggering 0 polarity 1
[   12.487717] Already setup the GSI :16
[   12.487740] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   12.487749] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   12.487762] uhci_hcd 0000:00:1a.0: detected 2 ports
[   12.487810] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00
[   12.488007] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   12.488010] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.488012] usb usb3: Product: UHCI Host Controller
[   12.488016] usb usb3: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.488018] usb usb3: SerialNumber: 0000:00:1a.0
[   12.488213] hub 3-0:1.0: USB hub found
[   12.488241] hub 3-0:1.0: 2 ports detected
[   12.488589] xen: registering gsi 21 triggering 0 polarity 1
[   12.488593] Already setup the GSI :21
[   12.488612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   12.488620] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   12.488633] uhci_hcd 0000:00:1a.1: detected 2 ports
[   12.488679] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[   12.488851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   12.488855] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.488858] usb usb4: Product: UHCI Host Controller
[   12.488860] usb usb4: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.488863] usb usb4: SerialNumber: 0000:00:1a.1
[   12.489057] hub 4-0:1.0: USB hub found
[   12.489090] hub 4-0:1.0: 2 ports detected
[   12.489509] xen: registering gsi 19 triggering 0 polarity 1
[   12.489514] Already setup the GSI :19
[   12.489535] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   12.489547] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   12.489559] uhci_hcd 0000:00:1a.2: detected 2 ports
[   12.489609] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800
[   12.489746] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[   12.489750] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.489752] usb usb5: Product: UHCI Host Controller
[   12.489754] usb usb5: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.489756] usb usb5: SerialNumber: 0000:00:1a.2
[   12.489967] hub 5-0:1.0: USB hub found
[   12.489985] hub 5-0:1.0: 2 ports detected
[   12.490331] xen: registering gsi 23 triggering 0 polarity 1
[   12.490335] Already setup the GSI :23
[   12.490357] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.490364] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   12.490374] uhci_hcd 0000:00:1d.0: detected 2 ports
[   12.490399] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[   12.490534] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[   12.490538] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.490540] usb usb6: Product: UHCI Host Controller
[   12.490542] usb usb6: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.490545] usb usb6: SerialNumber: 0000:00:1d.0
[   12.490768] hub 6-0:1.0: USB hub found
[   12.490785] hub 6-0:1.0: 2 ports detected
[   12.491147] xen: registering gsi 19 triggering 0 polarity 1
[   12.491152] Already setup the GSI :19
[   12.491174] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.491182] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   12.491194] uhci_hcd 0000:00:1d.1: detected 2 ports
[   12.491221] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[   12.491368] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   12.491371] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.491374] usb usb7: Product: UHCI Host Controller
[   12.491376] usb usb7: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.491378] usb usb7: SerialNumber: 0000:00:1d.1
[   12.491606] hub 7-0:1.0: USB hub found
[   12.491635] hub 7-0:1.0: 2 ports detected
[   12.491999] xen: registering gsi 18 triggering 0 polarity 1
[   12.492004] Already setup the GSI :18
[   12.492031] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.492038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   12.492047] uhci_hcd 0000:00:1d.2: detected 2 ports
[   12.492078] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[   12.492196] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[   12.492200] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.492202] usb usb8: Product: UHCI Host Controller
[   12.492204] usb usb8: Manufacturer: Linux 4.6.0-1-amd64 uhci_hcd
[   12.492206] usb usb8: SerialNumber: 0000:00:1d.2
[   12.492380] hub 8-0:1.0: USB hub found
[   12.492389] hub 8-0:1.0: 2 ports detected
[   12.492582] ahci 0000:00:1f.2: version 3.0
[   12.492719] xen: registering gsi 19 triggering 0 polarity 1
[   12.492723] Already setup the GSI :19
[   12.492848] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[   12.492902] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[   12.492906] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[   12.531669] scsi host1: ahci
[   12.531867] scsi host2: ahci
[   12.532113] scsi host3: ahci
[   12.532300] scsi host4: ahci
[   12.532481] scsi host5: ahci
[   12.532671] scsi host6: ahci
[   12.532785] ata1: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6100 irq 130
[   12.532787] ata2: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6180 irq 130
[   12.532790] ata3: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6200 irq 130
[   12.532791] ata4: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6280 irq 130
[   12.532793] ata5: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6300 irq 130
[   12.532795] ata6: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6380 irq 130
[   12.643945] igb 0000:01:00.0: added PHC on eth0
[   12.643950] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[   12.643953] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:96:b4:48
[   12.643957] igb 0000:01:00.0: eth0: PBA No: Unknown
[   12.643960] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[   12.644028] xen: registering gsi 40 triggering 0 polarity 1
[   12.644042] xen: --> pirq=40 -> irq=40 (gsi=40)
[   12.827900] igb 0000:01:00.1: added PHC on eth1
[   12.827903] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[   12.827905] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:96:b4:49
[   12.827908] igb 0000:01:00.1: eth1: PBA No: Unknown
[   12.827910] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[   12.842798] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.853835] ata1.00: ATAPI: DV-28S-W, 1.2B, max UDMA/100
[   12.857331] ata1.00: configured for UDMA/100
[   12.966868] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[   13.122807] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298c52fb63, max_idle_ns: 440795291491 ns
[   13.141866] usb 4-1: New USB device found, idVendor=046b, idProduct=ff10
[   13.141871] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.141874] usb 4-1: Product: Virtual Keyboard and Mouse
[   13.141876] usb 4-1: Manufacturer: American Megatrends Inc.
[   13.141879] usb 4-1: SerialNumber: serial
[   13.182621] hidraw: raw HID events driver (C) Jiri Kosina
[   13.193099] usbcore: registered new interface driver usbhid
[   13.193102] usbhid: USB HID core driver
[   13.194113] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046B:FF10.0001/input/input3
[   13.247311] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1/input0
[   13.247514] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046B:FF10.0002/input/input4
[   13.247949] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1/input1
[   14.123273] clocksource: Switched to clocksource tsc
[   14.334867] random: nonblocking pool is initialized
[   33.967413] aacraid: Host adapter abort request (0,0,56,0)
[   55.087949] aacraid: Host adapter abort request (0,0,57,0)
[   76.016554] aacraid: Host adapter abort request (0,0,58,0)
[   97.009124] aacraid: Host adapter abort request (0,0,59,0)
[  118.001690] aacraid: Host adapter abort request (0,0,60,0)
[  139.058265] aacraid: Host adapter abort request (0,0,61,0)
[  160.050821] aacraid: Host adapter abort request (0,0,62,0)
[  181.043410] aacraid: Host adapter abort request (0,1,0,0)
[  193.523637] raid6: sse2x1   gen()  5886 MB/s
[  193.591633] raid6: sse2x1   xor()  4592 MB/s
[  193.659627] raid6: sse2x2   gen()  6944 MB/s
[  193.727625] raid6: sse2x2   xor()  5402 MB/s
[  193.795629] raid6: sse2x4   gen()  7710 MB/s
[  193.863626] raid6: sse2x4   xor()  6058 MB/s
[  193.863629] raid6: using algorithm sse2x4 gen() 7710 MB/s
[  193.863630] raid6: .... xor() 6058 MB/s, rmw enabled
[  193.863632] raid6: using ssse3x2 recovery algorithm
[  193.864259] xor: measuring software checksum speed
[  193.903624]    prefetch64-sse: 10191.000 MB/sec
[  193.943625]    generic_sse:  8962.000 MB/sec
[  193.943627] xor: using function: prefetch64-sse (10191.000 MB/sec)
[  193.946821] device-mapper: uevent: version 1.0.3
[  193.946928] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[  193.947348] async_tx: api initialized (async)
[  193.949752] md: raid6 personality registered for level 6
[  193.949754] md: raid5 personality registered for level 5
[  193.949755] md: raid4 personality registered for level 4
[  193.950260] device-mapper: raid: Loading target version 1.7.0
[  193.953087] zavl: module license 'CDDL' taints kernel.
[  193.953090] Disabling lock debugging due to kernel taint
[  193.957050] SPL: Loaded module v0.6.5.7-5-jessie
[  193.984186] ZFS: Loaded module v0.6.5.7-8-jessie, ZFS pool version 5000, ZFS filesystem version 5
[  194.238387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  196.240245] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[  196.343921] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  202.035970] aacraid: Host adapter abort request (0,1,1,0)
~ # dmesg | grep aacraid
[   12.456118] Adaptec aacraid driver 1.2-1[41052]-ms
[   12.486751] scsi host0: aacraid
[   33.967413] aacraid: Host adapter abort request (0,0,56,0)
[   55.087949] aacraid: Host adapter abort request (0,0,57,0)
[   76.016554] aacraid: Host adapter abort request (0,0,58,0)
[   97.009124] aacraid: Host adapter abort request (0,0,59,0)
[  118.001690] aacraid: Host adapter abort request (0,0,60,0)
[  139.058265] aacraid: Host adapter abort request (0,0,61,0)
[  160.050821] aacraid: Host adapter abort request (0,0,62,0)
[  181.043410] aacraid: Host adapter abort request (0,1,0,0)
[  202.035970] aacraid: Host adapter abort request (0,1,1,0)
[  223.028552] aacraid: Host adapter abort request (0,1,2,0)

~ #

Thanks in advance,

Regards,
  Alex
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.