[ 0.000000] Linux version 4.10.12-1-default (geeko@buildhost) (gcc version 6.3.1 20170202 [gcc-6-branch revision 245119] (SUSE Linux) ) #1 SMP PREEMPT Fri Apr 21 11:50:25 UTC 2017 (3043bd9) [ 0.000000] Command line: root=/dev/mapper/system-root console=hvc0 earlyprintk=xen resume=/dev/system/swap splash=silent quiet showopts [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] Xen: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] Xen: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] Xen: [mem 0x0000000040005000-0x00000000d8cfffff] usable [ 0.000000] Xen: [mem 0x00000000d8d00000-0x00000000d9a67fff] reserved [ 0.000000] Xen: [mem 0x00000000d9a68000-0x00000000d9aeffff] usable [ 0.000000] Xen: [mem 0x00000000d9af0000-0x00000000d9b96fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000d9b97000-0x00000000da40bfff] reserved [ 0.000000] Xen: [mem 0x00000000da40c000-0x00000000da40cfff] usable [ 0.000000] Xen: [mem 0x00000000da40d000-0x00000000da44ffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000da450000-0x00000000dad58fff] usable [ 0.000000] Xen: [mem 0x00000000dad59000-0x00000000daff1fff] reserved [ 0.000000] Xen: [mem 0x00000000daff2000-0x00000000daffffff] usable [ 0.000000] Xen: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000081e5fffff] usable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xd9b78000 ACPI 2.0=0xd9b78000 SMBIOS=0xf04c0 MPS=0xfd450 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9SAE/X9SAE, BIOS 2.0a 12/10/2012 [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x81e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR: Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x0227e000, 0x0227efff] PGTABLE [ 0.000000] BRK [0x0227f000, 0x0227ffff] PGTABLE [ 0.000000] BRK [0x02280000, 0x02280fff] PGTABLE [ 0.000000] BRK [0x02281000, 0x02281fff] PGTABLE [ 0.000000] BRK [0x02282000, 0x02282fff] PGTABLE [ 0.000000] BRK [0x02283000, 0x02283fff] PGTABLE [ 0.000000] BRK [0x02284000, 0x02284fff] PGTABLE [ 0.000000] BRK [0x02285000, 0x02285fff] PGTABLE [ 0.000000] BRK [0x02286000, 0x02286fff] PGTABLE [ 0.000000] BRK [0x02287000, 0x02287fff] PGTABLE [ 0.000000] BRK [0x02288000, 0x02288fff] PGTABLE [ 0.000000] BRK [0x02289000, 0x02289fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x04c82fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000D9B78000 000024 (v02 SUPERM) [ 0.000000] ACPI: XSDT 0x00000000D9B78088 00009C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D9B81C78 00010C (v05 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D9B781C0 009AB5 (v02 SUPERM SMCI--MB 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000D9B95080 000040 [ 0.000000] ACPI: APIC 0x00000000D9B81D88 000092 (v03 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D9B81E20 000044 (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000D9B81E68 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000D9B81EA8 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D9B81EE0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000D9B82250 0009A4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000D9B82BF8 00102B (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: RMAD 0x00000000D9B83C28 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 0x00000000D9B83CE0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: EINJ 0x00000000D9B83D88 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 0x00000000D9B83EB8 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 0x00000000D9B840E8 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 0x00000000D9B84190 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7d0828000-0x7d083dfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081e5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d8cfffff] [ 0.000000] node 0: [mem 0x00000000d9a68000-0x00000000d9aeffff] [ 0.000000] node 0: [mem 0x00000000da40c000-0x00000000da40cfff] [ 0.000000] node 0: [mem 0x00000000da450000-0x00000000dad58fff] [ 0.000000] node 0: [mem 0x00000000daff2000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081e5fffff] [ 0.000000] On node 0 totalpages: 8354365 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13843 pages used for memmap [ 0.000000] DMA32 zone: 885919 pages, LIFO batch:31 [ 0.000000] Normal zone: 116632 pages used for memmap [ 0.000000] Normal zone: 7464448 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 158658 page(s) [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8d00000-0xd9a67fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9af0000-0xd9b96fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9b97000-0xda40bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xda40d000-0xda44ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdad59000-0xdaff1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.8.0_06-1 (preserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff8807fb000000 s109784 r8192 d29480 u262144 [ 0.000000] pcpu-alloc: s109784 r8192 d29480 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8223805 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/system-root console=hvc0 earlyprintk=xen resume=/dev/system/swap splash=silent quiet showopts [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 524288 bytes [ 0.000000] early log buf free: 250208(95%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x7f7000000-0x7fb000000] (64MB) mapped at [ffff8807f7000000-ffff8807faffffff] [ 0.000000] Memory: 5624824K/33417460K available (7310K kernel code, 1284K rwdata, 5116K rodata, 1804K init, 1468K bss, 1331592K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:33024 nr_irqs:488 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [hvc0] enabled [ 0.000000] bootconsole [xenboot0] disabled [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3499.944 MHz processor [ 40.031413] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.06 BogoMIPS (lpj=14000120) [ 40.031414] pid_max: default: 32768 minimum: 301 [ 40.031427] ACPI: Core revision 20160930 [ 40.040766] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 40.040936] Security Framework initialized [ 40.040940] AppArmor: AppArmor initialized [ 40.043554] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 40.049743] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 40.052250] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 40.052292] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 40.052584] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 40.052584] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 40.052586] CPU: Physical Processor ID: 0 [ 40.052586] CPU: Processor Core ID: 0 [ 40.052588] mce: CPU supports 2 MCE banks [ 40.052599] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 40.052600] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 40.052665] Freeing SMP alternatives memory: 28K [ 40.065100] ------------[ cut here ]------------ [ 40.065105] WARNING: CPU: 0 PID: 0 at ../mm/page_alloc.c:3541 __alloc_pages_slowpath+0x900/0xa70 [ 40.065106] Modules linked in: [ 40.065108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.12-1-default #1 [ 40.065108] Hardware name: Supermicro X9SAE/X9SAE, BIOS 2.0a 12/10/2012 [ 40.065109] Call Trace: [ 40.065121] dump_stack+0x5c/0x7a [ 40.065124] __warn+0xbe/0xe0 [ 40.065127] __alloc_pages_slowpath+0x900/0xa70 [ 40.065130] ? __zone_watermark_ok+0x5/0xe0 [ 40.065131] ? get_page_from_freelist+0x596/0xbb0 [ 40.065133] ? __xen_pgd_pin+0x330/0x360 [ 40.065135] ? acpi_ut_status_exit+0x5/0x9e [ 40.065136] ? acpi_os_read_port+0x5/0x60 [ 40.065138] ? acpi_hw_read_port+0x3f/0x9d [ 40.065139] __alloc_pages_nodemask+0x1f4/0x230 [ 40.065142] alloc_page_interleave+0x36/0x80 [ 40.065144] alloc_pages_current+0xee/0x140 [ 40.065147] efi_memmap_alloc+0x2e/0x59 [ 40.065150] efi_free_boot_services+0x3f/0x16c [ 40.065153] start_kernel+0x43b/0x44d [ 40.065156] xen_start_kernel+0x50c/0x516 [ 40.065159] ---[ end trace c2be1d013caac0f7 ]--- [ 40.065159] efi: Failed to allocate new EFI memmap [ 40.065182] ftrace: allocating 28867 entries in 113 pages [ 40.072931] cpu 0 spinlock event irq 25 [ 40.072934] smpboot: Max logical packages: 1 [ 40.072936] VPMU disabled by hypervisor. [ 40.084978] Performance Events: IvyBridge events, PMU not available due to virtualization, using software events only. [ 40.113372] NMI watchdog: disabled (cpu0): hardware events not enabled [ 40.113373] NMI watchdog: Shutting down hard lockup detector on all cpus [ 40.121381] smp: Bringing up secondary CPUs ... [ 40.153750] installing Xen timer for CPU 1 [ 40.153967] cpu 1 spinlock event irq 37 [ 40.186080] installing Xen timer for CPU 2 [ 40.186253] cpu 2 spinlock event irq 44 [ 40.218435] installing Xen timer for CPU 3 [ 40.218636] cpu 3 spinlock event irq 51 [ 40.250756] installing Xen timer for CPU 4 [ 40.250973] cpu 4 spinlock event irq 58 [ 40.283100] installing Xen timer for CPU 5 [ 40.283310] cpu 5 spinlock event irq 65 [ 40.315396] installing Xen timer for CPU 6 [ 40.315624] cpu 6 spinlock event irq 72 [ 40.347672] installing Xen timer for CPU 7 [ 40.347831] cpu 7 spinlock event irq 79 [ 40.347886] smp: Brought up 1 node, 8 CPUs [ 40.426803] node 0 initialised, 6615261 pages in 76ms [ 40.428013] devtmpfs: initialized [ 40.428078] x86/mm: Memory block size: 128MB [ 40.432327] random: fast init done [ 40.432489] PM: Registering ACPI NVS region [mem 0xd9af0000-0xd9b96fff] (684032 bytes) [ 40.432502] PM: Registering ACPI NVS region [mem 0xda40d000-0xda44ffff] (274432 bytes) [ 40.432574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 40.432594] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 40.432663] pinctrl core: initialized pinctrl subsystem [ 40.432724] RTC time: 21:55:12, date: 05/02/17 [ 40.432860] NET: Registered protocol family 16 [ 40.432867] xen:grant_table: Grant tables using version 1 layout [ 40.432875] Grant table initialized [ 40.433252] PCCT header not found. [ 40.433274] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 40.433275] ACPI: bus type PCI registered [ 40.433276] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 40.433474] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 40.433476] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 40.437824] PCI: Using configuration type 1 for base access [ 40.461399] ACPI: Added _OSI(Module Device) [ 40.461399] ACPI: Added _OSI(Processor Device) [ 40.461400] ACPI: Added _OSI(3.0 _SCP Extensions) [ 40.461400] ACPI: Added _OSI(Processor Aggregator Device) [ 40.461579] xen: registering gsi 9 triggering 0 polarity 0 [ 40.461716] ACPI: Executed 1 blocks of module-level executable AML code [ 40.467120] ACPI: Dynamic OEM Table Load: [ 40.467125] ACPI: SSDT 0xFFFF88017C57E000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 40.467660] ACPI: Dynamic OEM Table Load: [ 40.467664] ACPI: SSDT 0xFFFF88017C673000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 40.468003] ACPI: Dynamic OEM Table Load: [ 40.468006] ACPI: SSDT 0xFFFF88017C416400 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 40.470291] ACPI: Interpreter enabled [ 40.470307] ACPI: (supports S0 S3 S4 S5) [ 40.470308] ACPI: Using IOAPIC for interrupt routing [ 40.470359] HEST: Table parsing has been initialized. [ 40.470360] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 40.477660] ACPI: Power Resource [FN00] (off) [ 40.477740] ACPI: Power Resource [FN01] (off) [ 40.477816] ACPI: Power Resource [FN02] (off) [ 40.477891] ACPI: Power Resource [FN03] (off) [ 40.477965] ACPI: Power Resource [FN04] (off) [ 40.478725] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 40.478729] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 40.479121] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 40.479364] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 40.479365] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 40.480063] PCI host bridge to bus 0000:00 [ 40.480065] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 40.480066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 40.480067] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 40.480068] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 40.480068] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 40.480069] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 40.480070] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 40.480071] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 40.480072] pci_bus 0000:00: root bus resource [bus 00-3e] [ 40.480082] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 40.480248] pci 0000:00:02.0: [8086:016a] type 00 class 0x030000 [ 40.480276] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 40.480288] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 40.480295] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 40.480525] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 40.480567] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 40.480718] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 40.480774] pci 0000:00:14.0: System wakeup disabled by ACPI [ 40.480832] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 40.480872] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 40.481022] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 40.481130] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 40.481156] pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7] [ 40.481168] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3a000-0xf7e3afff] [ 40.481384] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 40.481416] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 40.481433] pci 0000:00:19.0: reg 0x14: [mem 0xf7e39000-0xf7e39fff] [ 40.481450] pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f] [ 40.481589] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 40.481646] pci 0000:00:19.0: System wakeup disabled by ACPI [ 40.481702] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 40.481743] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e38000-0xf7e383ff] [ 40.481916] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 40.481994] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 40.482057] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 40.482086] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 40.482225] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 40.482289] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 40.482347] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 40.482510] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 40.482548] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 40.482551] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 40.482597] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 40.482669] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 40.482834] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 40.482868] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 40.482871] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 40.482915] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 40.482975] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 40.483008] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e37000-0xf7e373ff] [ 40.483190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 40.483268] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 40.483321] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 40.483477] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 40.483529] pci 0000:00:1f.0: [8086:1e53] type 00 class 0x060100 [ 40.483805] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 40.483841] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 40.483858] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 40.483875] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 40.483892] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 40.483909] pci 0000:00:1f.2: reg 0x20: [io 0xf040-0xf05f] [ 40.483926] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e36000-0xf7e367ff] [ 40.484032] pci 0000:00:1f.2: PME# supported from D3hot [ 40.484135] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 40.484168] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e35000-0xf7e350ff 64bit] [ 40.484218] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 40.484442] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 40.484675] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 40.484742] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff] [ 40.484822] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f] [ 40.484863] pci 0000:02:00.0: reg 0x1c: [mem 0xf7d20000-0xf7d23fff] [ 40.485312] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 40.485447] pci 0000:02:00.0: System wakeup disabled by ACPI [ 40.500469] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 40.500475] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff] [ 40.500481] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff] [ 40.500558] pci 0000:03:00.0: [1814:0201] type 00 class 0x028000 [ 40.500584] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff] [ 40.500833] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 40.500843] pci 0000:00:1e.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 40.500854] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 40.500854] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 40.500855] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 40.500856] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 40.500857] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 40.500857] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 40.500858] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 40.500859] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode) [ 40.501182] xen: registering gsi 13 triggering 1 polarity 0 [ 40.501717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 40.501803] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 40.501886] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 40.501965] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 40.502049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 40.502134] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 40.502217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 40.502301] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 40.502535] ACPI: Enabled 4 GPEs in block 00 to 3F [ 40.502654] xen:balloon: Initialising balloon driver [ 40.506863] xen_balloon: Initialising balloon driver [ 40.507026] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 40.507028] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 40.507031] pci 0000:00:02.0: vgaarb: bridge control possible [ 40.507032] vgaarb: loaded [ 40.507142] SCSI subsystem initialized [ 40.507279] libata version 3.00 loaded. [ 40.507302] Registered efivars operations [ 40.539187] PCI: Using ACPI for IRQ routing [ 40.543636] PCI: pci_cache_line_size set to 64 bytes [ 40.543788] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 40.543790] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 40.543790] e820: reserve RAM buffer [mem 0xd8d00000-0xdbffffff] [ 40.543791] e820: reserve RAM buffer [mem 0xd9af0000-0xdbffffff] [ 40.543792] e820: reserve RAM buffer [mem 0xda40d000-0xdbffffff] [ 40.543793] e820: reserve RAM buffer [mem 0xdad59000-0xdbffffff] [ 40.543793] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 40.543794] e820: reserve RAM buffer [mem 0x81e600000-0x81fffffff] [ 40.543869] NetLabel: Initializing [ 40.543870] NetLabel: domain hash size = 128 [ 40.543870] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 40.543882] NetLabel: unlabeled traffic allowed by default [ 40.544045] clocksource: Switched to clocksource xen [ 40.550139] VFS: Disk quotas dquot_6.6.0 [ 40.550192] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 40.550213] hugetlbfs: disabling because there are no supported hugepage sizes [ 40.550237] AppArmor: AppArmor Filesystem Enabled [ 40.550262] pnp: PnP ACPI init [ 40.550361] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 40.550363] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 40.550446] system 00:01: [io 0x0680-0x069f] has been reserved [ 40.550447] system 00:01: [io 0x1000-0x100f] has been reserved [ 40.550448] system 00:01: [io 0xffff] has been reserved [ 40.550449] system 00:01: [io 0xffff] has been reserved [ 40.550450] system 00:01: [io 0x0400-0x0453] has been reserved [ 40.550451] system 00:01: [io 0x0458-0x047f] has been reserved [ 40.550452] system 00:01: [io 0x0500-0x057f] has been reserved [ 40.550453] system 00:01: [io 0x164e-0x164f] has been reserved [ 40.550454] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 40.550463] xen: registering gsi 8 triggering 1 polarity 0 [ 40.550509] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 40.550556] system 00:03: [io 0x0454-0x0457] has been reserved [ 40.550558] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 40.550603] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 40.550605] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 40.550755] system 00:05: [io 0x0a00-0x0a1f] has been reserved [ 40.550756] system 00:05: [io 0x0a30-0x0a3f] has been reserved [ 40.550758] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 40.551085] xen: registering gsi 4 triggering 1 polarity 0 [ 40.551086] Already setup the GSI :4 [ 40.551088] pnp 00:06: [dma 0 disabled] [ 40.551126] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 40.551413] xen: registering gsi 3 triggering 1 polarity 0 [ 40.551431] pnp 00:07: [dma 0 disabled] [ 40.551466] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 40.551754] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 40.551755] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 40.551756] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 40.551757] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 40.551758] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 40.551759] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 40.551760] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 40.551761] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 40.551762] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 40.551763] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 40.551764] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 40.551766] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 40.551985] system 00:09: [mem 0x20000000-0x201fffff] has been reserved [ 40.551986] system 00:09: [mem 0x40004000-0x40004fff] has been reserved [ 40.551988] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 40.552006] pnp: PnP ACPI: found 10 devices [ 40.557184] PM-Timer failed consistency check (0xffffff) - aborting. [ 40.557238] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 40.557264] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 40.557267] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff] [ 40.557275] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff] [ 40.557291] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 40.557298] pci 0000:00:1e.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 40.557314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 40.557314] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 40.557315] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 40.557316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 40.557317] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 40.557318] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 40.557318] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 40.557319] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 40.557320] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 40.557321] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 40.557322] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 40.557323] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 40.557323] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 40.557324] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 40.557325] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window] [ 40.557326] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window] [ 40.557326] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window] [ 40.557327] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window] [ 40.557328] pci_bus 0000:03: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 40.557555] NET: Registered protocol family 2 [ 40.557863] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 40.558166] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 40.558259] TCP: Hash tables configured (established 262144 bind 65536) [ 40.558310] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 40.558402] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 40.558480] NET: Registered protocol family 1 [ 40.558493] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 40.558573] xen: registering gsi 16 triggering 0 polarity 1 [ 40.558591] xen: --> pirq=16 -> irq=16 (gsi=16) [ 40.558805] xen: registering gsi 16 triggering 0 polarity 1 [ 40.558807] Already setup the GSI :16 [ 40.558960] xen: registering gsi 23 triggering 0 polarity 1 [ 40.558968] xen: --> pirq=23 -> irq=23 (gsi=23) [ 40.559149] PCI: CLS mismatch (64 != 32), using 64 bytes [ 40.559184] Unpacking initramfs... [ 41.456372] Freeing initrd memory: 12812K [ 41.456649] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 41.456649] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 41.456650] RAPL PMU: hw unit of domain package 2^-16 Joules [ 41.456650] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 41.456697] Scanning for low memory corruption every 60 seconds [ 41.457055] audit: initializing netlink subsys (disabled) [ 41.457165] audit: type=2000 audit(1493762111.985:1): initialized [ 41.457561] workingset: timestamp_bits=37 max_order=23 bucket_order=0 [ 41.457721] zbud: loaded [ 41.459470] Key type asymmetric registered [ 41.459471] Asymmetric key parser 'x509' registered [ 41.459493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 41.459537] io scheduler noop registered [ 41.459537] io scheduler deadline registered [ 41.459542] io scheduler cfq registered (default) [ 41.459757] xen: registering gsi 16 triggering 0 polarity 1 [ 41.459763] Already setup the GSI :16 [ 41.459920] xen: registering gsi 19 triggering 0 polarity 1 [ 41.459935] xen: --> pirq=19 -> irq=19 (gsi=19) [ 41.460115] efifb: probing for efifb [ 41.460250] efifb: framebuffer at 0xe0000000, using 1876k, total 1875k [ 41.460251] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 41.460251] efifb: scrolling: redraw [ 41.460252] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 41.461066] Console: switching to colour frame buffer device 100x37 [ 41.461794] fb0: EFI VGA frame buffer device [ 41.461799] intel_idle: MWAIT substates: 0x1120 [ 41.461800] intel_idle: v0.4.1 model 0x3A [ 41.461802] intel_idle: intel_idle yielding to none [ 41.462086] Monitor-Mwait will be used to enter C-1 state [ 41.462098] Monitor-Mwait will be used to enter C-3 state [ 41.471520] Warning: Processor Platform Limit not supported. [ 41.471555] [Firmware Bug]: APEI: Invalid physical address in GAR [0x0/8/0/1/0] [ 41.471584] GHES: Failed to enable APEI firmware first mode. [ 41.472004] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 41.492918] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 41.494183] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 41.494248] xen: registering gsi 19 triggering 0 polarity 1 [ 41.494249] Already setup the GSI :19 [ 41.514950] 0000:00:16.3: ttyS4 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A [ 41.515199] hpet_acpi_add: no address or irqs in _CRS [ 41.515239] Non-volatile memory driver v1.3 [ 41.515268] Linux agpgart interface v0.103 [ 41.515924] ahci 0000:00:1f.2: version 3.0 [ 41.515992] xen: registering gsi 19 triggering 0 polarity 1 [ 41.515994] Already setup the GSI :19 [ 41.516093] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 41.526263] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 41.526265] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 41.584776] scsi host0: ahci [ 41.585069] scsi host1: ahci [ 41.585414] scsi host2: ahci [ 41.585787] scsi host3: ahci [ 41.586077] scsi host4: ahci [ 41.586270] scsi host5: ahci [ 41.586309] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 84 [ 41.586311] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 84 [ 41.586313] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 84 [ 41.586314] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 84 [ 41.586316] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 84 [ 41.586318] ata6: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36380 irq 84 [ 41.586352] i8042: PNP: No PS/2 controller found. [ 41.586456] mousedev: PS/2 mouse device common for all mice [ 41.586517] rtc_cmos 00:02: RTC can wake from S4 [ 41.586685] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 41.586742] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 41.586939] ledtrig-cpu: registered to indicate activity on CPUs [ 41.586940] EFI Variables Facility v0.08 2004-May-17 [ 41.618958] hidraw: raw HID events driver (C) Jiri Kosina [ 41.619098] NET: Registered protocol family 10 [ 41.624196] Segment Routing with IPv6 [ 41.624633] mce: Unable to init device /dev/mcelog (rc: -16) [ 41.624845] registered taskstats version 1 [ 41.624863] zswap: loaded using pool lzo/zbud [ 41.627272] Key type big_key registered [ 41.629557] Key type encrypted registered [ 41.629559] AppArmor: AppArmor sha1 policy hashing enabled [ 41.629983] BERT: Can't request iomem region <00000000d9b96e18-00000000d9b96e2b>. [ 41.630003] Magic number: 1:263:954 [ 41.630072] memory memory7: hash matches [ 41.630131] rtc_cmos 00:02: setting system clock to 2017-05-02 21:55:13 UTC (1493762113) [ 41.630180] PM: Checking hibernation image partition /dev/system/swap [ 41.899416] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.903604] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 41.903606] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 41.903607] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 41.907310] ata1.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 [ 41.911813] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 41.911815] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 41.911816] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 41.915519] ata1.00: configured for UDMA/100 [ 41.926844] scsi 0:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 [ 42.255415] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 42.262032] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 42.262033] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 42.262034] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 42.268462] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20003, max UDMA/133 [ 42.268464] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 42.275090] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 42.275092] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 42.275093] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 42.281599] ata2.00: configured for UDMA/133 [ 42.281863] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5 [ 42.312518] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 42.312520] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 42.312570] sd 1:0:0:0: [sda] Write Protect is off [ 42.312572] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.312665] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.480117] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32736d70b2e, max_idle_ns: 440795274731 ns [ 42.627482] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 42.633529] sda: sda1 [ 42.634297] sd 1:0:0:0: [sda] Attached SCSI disk [ 42.669693] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 42.669695] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 42.669696] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 42.738154] ata3.00: NCQ Send/Recv Log not supported [ 42.738155] ata3.00: ATA-9: ST2000DX001-1NS164, CC41, max UDMA/133 [ 42.738156] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 42.794714] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 42.794715] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 42.794716] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 42.863205] ata3.00: NCQ Send/Recv Log not supported [ 42.863208] ata3.00: configured for UDMA/133 [ 42.863480] scsi 2:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5 [ 42.896471] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 42.896473] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 42.896520] sd 2:0:0:0: [sdb] Write Protect is off [ 42.896521] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.896617] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.900999] sdb: sdb1 sdb2 sdb3 [ 42.901609] sd 2:0:0:0: [sdb] Attached SCSI disk [ 43.210990] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 43.253269] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 43.253271] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 43.253272] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 43.321679] ata4.00: NCQ Send/Recv Log not supported [ 43.321680] ata4.00: ATA-9: ST2000DX001-1NS164, CC41, max UDMA/133 [ 43.321681] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 43.378280] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 43.378281] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 43.378282] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 43.446565] ata4.00: NCQ Send/Recv Log not supported [ 43.446570] ata4.00: configured for UDMA/133 [ 43.446861] scsi 3:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5 [ 43.476250] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 43.476251] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 43.476260] sd 3:0:0:0: [sdc] Write Protect is off [ 43.476260] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 43.476270] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.480574] sdc: sdc1 sdc2 sdc3 [ 43.480883] sd 3:0:0:0: [sdc] Attached SCSI disk [ 43.504349] clocksource: Switched to clocksource tsc [ 43.791298] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 43.832887] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 43.832888] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 43.832889] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 43.901349] ata5.00: NCQ Send/Recv Log not supported [ 43.901350] ata5.00: ATA-9: ST2000DX001-1NS164, CC41, max UDMA/133 [ 43.901350] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 43.957906] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 43.957908] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 43.957909] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 44.026323] ata5.00: NCQ Send/Recv Log not supported [ 44.026326] ata5.00: configured for UDMA/133 [ 44.026639] scsi 4:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5 [ 44.056249] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 44.056250] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 44.056258] sd 4:0:0:0: [sdd] Write Protect is off [ 44.056259] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 44.056269] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.060332] sdd: sdd1 sdd2 sdd3 [ 44.060635] sd 4:0:0:0: [sdd] Attached SCSI disk [ 44.371385] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 44.415414] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 44.415415] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 44.415416] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 44.483875] ata6.00: NCQ Send/Recv Log not supported [ 44.483876] ata6.00: ATA-9: ST2000DX001-1NS164, CC41, max UDMA/133 [ 44.483877] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 44.540421] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 44.540423] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 44.540424] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 44.608886] ata6.00: NCQ Send/Recv Log not supported [ 44.608889] ata6.00: configured for UDMA/133 [ 44.609147] scsi 5:0:0:0: Direct-Access ATA ST2000DX001-1NS1 CC41 PQ: 0 ANSI: 5 [ 44.640251] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 44.640253] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 44.640261] sd 5:0:0:0: [sde] Write Protect is off [ 44.640262] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 44.640271] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.644593] sde: sde1 sde2 sde3 [ 44.644918] sd 5:0:0:0: [sde] Attached SCSI disk [ 44.644956] PM: Hibernation image not present or could not be loaded. [ 44.645407] Freeing unused kernel memory: 1804K [ 44.645408] Write protecting the kernel read-only data: 14336k [ 44.647814] Freeing unused kernel memory: 868K [ 44.648122] Freeing unused kernel memory: 1028K [ 44.720527] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 44.720605] systemd[1]: Detected virtualization xen. [ 44.720608] systemd[1]: Detected architecture x86-64. [ 44.720611] systemd[1]: Running in initial RAM disk. [ 44.720626] systemd[1]: Set hostname to . [ 44.772425] systemd[1]: Reached target Timers. [ 44.772520] systemd[1]: Listening on Journal Audit Socket. [ 44.772547] systemd[1]: Listening on udev Kernel Socket. [ 44.772909] systemd[1]: Created slice System Slice. [ 44.772922] systemd[1]: Reached target Slices. [ 44.782178] alua: device handler registered [ 44.782814] emc: device handler registered [ 44.783102] rdac: device handler registered [ 44.784859] device-mapper: uevent: version 1.0.3 [ 44.784937] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 44.785940] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 44.785987] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 44.786034] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 44.786073] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 44.786124] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 44.786180] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 44.977237] random: crng init done [ 45.126557] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 45.126601] ACPI: Power Button [PWRB] [ 45.126641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 45.126668] ACPI: Power Button [PWRF] [ 45.138062] ACPI: bus type USB registered [ 45.138090] usbcore: registered new interface driver usbfs [ 45.138100] usbcore: registered new interface driver hub [ 45.138145] usbcore: registered new device driver usb [ 45.138247] [drm] Initialized [ 45.139178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 45.139703] ehci-pci: EHCI PCI platform driver [ 45.139958] xen: registering gsi 16 triggering 0 polarity 1 [ 45.139965] Already setup the GSI :16 [ 45.140014] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 45.140019] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 45.140042] ehci-pci 0000:00:1a.0: debug port 2 [ 45.143996] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 45.144074] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e38000 [ 45.161853] AVX version of gcm_enc/dec engaged. [ 45.161854] AES CTR mode by8 optimization enabled [ 45.164070] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 45.164307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 45.164309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 45.164310] usb usb1: Product: EHCI Host Controller [ 45.164311] usb usb1: Manufacturer: Linux 4.10.12-1-default ehci_hcd [ 45.164312] usb usb1: SerialNumber: 0000:00:1a.0 [ 45.164528] hub 1-0:1.0: USB hub found [ 45.164554] hub 1-0:1.0: 3 ports detected [ 45.164968] xen: registering gsi 23 triggering 0 polarity 1 [ 45.164976] Already setup the GSI :23 [ 45.165021] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 45.165026] sr 0:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 45.165027] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 45.165029] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 45.165050] ehci-pci 0000:00:1d.0: debug port 2 [ 45.168981] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 45.169029] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 45.169184] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 45.184069] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 45.184167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 45.184169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 45.184171] usb usb2: Product: EHCI Host Controller [ 45.184172] usb usb2: Manufacturer: Linux 4.10.12-1-default ehci_hcd [ 45.184173] usb usb2: SerialNumber: 0000:00:1d.0 [ 45.184330] hub 2-0:1.0: USB hub found [ 45.184343] hub 2-0:1.0: 3 ports detected [ 45.184693] xen: registering gsi 16 triggering 0 polarity 1 [ 45.184699] Already setup the GSI :16 [ 45.184742] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 45.184746] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 45.185844] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 45.185858] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 45.186063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 45.186065] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 45.186066] usb usb3: Product: xHCI Host Controller [ 45.186067] usb usb3: Manufacturer: Linux 4.10.12-1-default xhci-hcd [ 45.186068] usb usb3: SerialNumber: 0000:00:14.0 [ 45.186184] hub 3-0:1.0: USB hub found [ 45.186206] hub 3-0:1.0: 4 ports detected [ 45.186721] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 45.186725] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 45.186855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 45.186857] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 45.186858] usb usb4: Product: xHCI Host Controller [ 45.186859] usb usb4: Manufacturer: Linux 4.10.12-1-default xhci-hcd [ 45.186860] usb usb4: SerialNumber: 0000:00:14.0 [ 45.187002] hub 4-0:1.0: USB hub found [ 45.187027] hub 4-0:1.0: 4 ports detected [ 45.187773] xen: registering gsi 16 triggering 0 polarity 1 [ 45.187776] Already setup the GSI :16 [ 45.188486] [drm] Memory usable by graphics device = 2048M [ 45.188488] checking generic (e0000000 1d5000) vs hw (e0000000 10000000) [ 45.188489] fb: switching to inteldrmfb from EFI VGA [ 45.188507] Console: switching to colour dummy device 80x25 [ 45.190692] [drm] Replacing VGA console driver [ 45.218151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 45.218153] [drm] Driver supports precise vblank timestamp query. [ 45.220419] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 45.223760] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 45.224756] acpi device:43: registered as cooling_device8 [ 45.224821] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 45.224904] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0 [ 45.303524] fbcon: inteldrmfb (fb0) is primary device [ 45.436375] Console: switching to colour frame buffer device 240x75 [ 45.456054] raid6: sse2x1 gen() 9481 MB/s [ 45.456528] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 45.524061] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 45.524063] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 45.524080] raid6: sse2x1 xor() 5897 MB/s [ 45.524769] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 45.592049] raid6: sse2x2 gen() 11916 MB/s [ 45.644325] usb 4-2: New USB device found, idVendor=0bda, idProduct=0301 [ 45.644327] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 45.644328] usb 4-2: Product: USB3.0 Card Reader [ 45.644328] usb 4-2: Manufacturer: Realtek [ 45.644329] usb 4-2: SerialNumber: 201006010301 [ 45.653182] usb-storage 4-2:1.0: USB Mass Storage device detected [ 45.653292] scsi host6: usb-storage 4-2:1.0 [ 45.653339] usbcore: registered new interface driver usb-storage [ 45.653646] usbcore: registered new interface driver uas [ 45.660075] raid6: sse2x2 xor() 8477 MB/s [ 45.672373] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 45.672375] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 45.672400] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 45.672402] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 45.672670] hub 1-1:1.0: USB hub found [ 45.672674] hub 2-1:1.0: USB hub found [ 45.672747] hub 1-1:1.0: 6 ports detected [ 45.672754] hub 2-1:1.0: 8 ports detected [ 45.728048] raid6: sse2x4 gen() 13839 MB/s [ 45.796046] raid6: sse2x4 xor() 10399 MB/s [ 45.796047] raid6: using algorithm sse2x4 gen() 13839 MB/s [ 45.796047] raid6: .... xor() 10399 MB/s, rmw enabled [ 45.796048] raid6: using ssse3x2 recovery algorithm [ 45.796479] async_tx: api initialized (async) [ 45.796699] xor: automatically using best checksumming function avx [ 45.798489] md/raid:md0: device sdc3 operational as raid disk 1 [ 45.798490] md/raid:md0: device sdb3 operational as raid disk 0 [ 45.798491] md/raid:md0: device sde3 operational as raid disk 3 [ 45.798491] md/raid:md0: device sdd3 operational as raid disk 2 [ 45.798765] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 45.809343] md0: detected capacity change from 0 to 5999443574784 [ 45.960110] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 45.964120] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 46.072383] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2524 [ 46.072386] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 46.072640] hub 1-1.2:1.0: USB hub found [ 46.072738] hub 1-1.2:1.0: 4 ports detected [ 46.078789] usb 2-1.5: New USB device found, idVendor=04e6, idProduct=5115 [ 46.078790] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 46.078791] usb 2-1.5: Product: SCR33x USB Smart Card Reader [ 46.078792] usb 2-1.5: Manufacturer: SCM Microsystems Inc. [ 46.078792] usb 2-1.5: SerialNumber: 21120618205645 [ 46.160113] usb 2-1.6: new high-speed USB device number 4 using ehci-pci [ 46.270002] usb 2-1.6: New USB device found, idVendor=0781, idProduct=5591 [ 46.270005] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 46.270007] usb 2-1.6: Product: Ultra USB 3.0 [ 46.270008] usb 2-1.6: Manufacturer: SanDisk [ 46.270010] usb 2-1.6: SerialNumber: 4C530001070324119140 [ 46.270399] usb-storage 2-1.6:1.0: USB Mass Storage device detected [ 46.270614] scsi host7: usb-storage 2-1.6:1.0 [ 46.360094] usb 1-1.2.2: new full-speed USB device number 4 using ehci-pci [ 46.471755] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c52b [ 46.471758] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 46.471760] usb 1-1.2.2: Product: USB Receiver [ 46.471761] usb 1-1.2.2: Manufacturer: Logitech [ 46.478796] usbcore: registered new interface driver usbhid [ 46.478797] usbhid: USB HID core driver [ 46.480719] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2.2/input2 [ 46.556093] usb 1-1.2.3: new full-speed USB device number 5 using ehci-pci [ 46.611479] input: Logitech K800 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:046D:C52B.0003/0003:046D:2010.0004/input/input3 [ 46.611632] logitech-hidpp-device 0003:046D:2010.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:1a.0-1.2.2:1 [ 46.613426] input: Logitech Performance MX as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:046D:C52B.0003/0003:046D:101A.0005/input/input4 [ 46.613565] logitech-hidpp-device 0003:046D:101A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:1a.0-1.2.2:2 [ 46.665484] usb 1-1.2.3: New USB device found, idVendor=08bb, idProduct=2704 [ 46.665485] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 46.665486] usb 1-1.2.3: Product: USB Audio DAC [ 46.665487] usb 1-1.2.3: Manufacturer: Burr-Brown from TI [ 46.668668] input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/0003:08BB:2704.0006/input/input5 [ 46.691226] scsi 6:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4 [ 46.691363] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 46.711731] scsi 6:0:0:1: Direct-Access Generic- USB3.0 CRW-SM/xD 1.00 PQ: 0 ANSI: 4 [ 46.711845] sd 6:0:0:1: Attached scsi generic sg7 type 0 [ 46.728331] hid-generic 0003:08BB:2704.0006: input,hidraw3: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:1a.0-1.2.3/input2 [ 46.734482] scsi 6:0:0:2: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4 [ 46.734598] sd 6:0:0:2: Attached scsi generic sg8 type 0 [ 46.744080] usb 1-1.2.4: new full-speed USB device number 6 using ehci-pci [ 46.963930] usb 1-1.2.4: New USB device found, idVendor=056d, idProduct=0002 [ 46.963932] usb 1-1.2.4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 46.963933] usb 1-1.2.4: Product: EIZO USB HID Monitor [ 46.963933] usb 1-1.2.4: Manufacturer: EIZO [ 47.281207] scsi 7:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 47.281336] sd 7:0:0:0: Attached scsi generic sg9 type 0 [ 47.281993] sd 7:0:0:0: [sdi] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 47.283035] sd 7:0:0:0: [sdi] Write Protect is off [ 47.283037] sd 7:0:0:0: [sdi] Mode Sense: 43 00 00 00 [ 47.284096] sd 7:0:0:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 47.297606] sd 7:0:0:0: [sdi] Attached SCSI removable disk [ 47.972411] scsi 6:0:0:3: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4 [ 47.972537] sd 6:0:0:3: Attached scsi generic sg10 type 0 [ 47.998480] scsi 6:0:0:4: Direct-Access Generic- USB3.0 CRW-SD/MS 1.00 PQ: 0 ANSI: 4 [ 47.998599] sd 6:0:0:4: Attached scsi generic sg11 type 0 [ 48.006752] sd 6:0:0:2: [sdh] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 48.024708] sd 6:0:0:2: [sdh] Write Protect is off [ 48.024710] sd 6:0:0:2: [sdh] Mode Sense: 2f 00 00 00 [ 48.041563] sd 6:0:0:2: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 48.049543] sd 6:0:0:0: [sdf] Attached SCSI removable disk [ 48.078339] sd 6:0:0:1: [sdg] Attached SCSI removable disk [ 48.123082] sd 6:0:0:3: [sdj] Attached SCSI removable disk [ 48.159556] sd 6:0:0:4: [sdk] Attached SCSI removable disk [ 48.218134] sdh: sdh1 sdh2 sdh3 sdh4 [ 48.235088] sd 6:0:0:2: [sdh] Attached SCSI removable disk [ 49.115443] hid-generic 0003:056D:0002.0007: hiddev0,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1a.0-1.2.4/input0 [ 55.062357] NET: Registered protocol family 38 [ 55.533083] PM: Starting manual resume from disk [ 55.533085] PM: Hibernation image partition 254:1 present [ 55.533086] PM: Looking for hibernation image. [ 55.533304] PM: Image not found (code -22) [ 55.533305] PM: Hibernation image not present or could not be loaded. [ 55.760636] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 55.762335] XFS (dm-2): Mounting V5 Filesystem [ 60.197585] XFS (dm-2): Ending clean mount [ 60.400219] systemd-journald[206]: Received SIGTERM from PID 1 (systemd). [ 60.458373] systemd: 20 output lines suppressed due to ratelimiting [ 62.209543] systemd-journald[982]: Received request to flush runtime journal from PID 1 [ 62.652176] audit: type=1400 audit(1493762134.518:2): apparmor="STATUS" operation="profile_load" name="ping" pid=1034 comm="apparmor_parser" [ 62.731115] audit: type=1400 audit(1493762134.594:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=1043 comm="apparmor_parser" [ 62.785464] audit: type=1400 audit(1493762134.650:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=1048 comm="apparmor_parser" [ 63.325366] audit: type=1400 audit(1493762135.190:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=1053 comm="apparmor_parser" [ 63.404741] audit: type=1400 audit(1493762135.270:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=1061 comm="apparmor_parser" [ 63.465391] audit: type=1400 audit(1493762135.330:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=1066 comm="apparmor_parser" [ 63.465392] audit: type=1400 audit(1493762135.330:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=1066 comm="apparmor_parser" [ 63.465393] audit: type=1400 audit(1493762135.330:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=1066 comm="apparmor_parser" [ 63.465394] audit: type=1400 audit(1493762135.330:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=1066 comm="apparmor_parser" [ 63.531102] audit: type=1400 audit(1493762135.394:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=1071 comm="apparmor_parser" [ 63.626104] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 63.643582] EDAC MC: Ver: 3.0.0 [ 63.685445] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 63.685532] thermal LNXTHERM:00: registered as thermal_zone0 [ 63.685535] ACPI: Thermal Zone [TZ00] (28 C) [ 63.686091] thermal LNXTHERM:01: registered as thermal_zone1 [ 63.686094] ACPI: Thermal Zone [TZ01] (30 C) [ 63.703922] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 63.734139] pps_core: LinuxPPS API ver. 1 registered [ 63.734141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 63.753255] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 63.764119] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247) [ 63.764126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 63.764131] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247) [ 63.764133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 63.764133] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247) [ 63.764135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 63.764136] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247) [ 63.764137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 63.764138] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 63.788273] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 63.826076] xen: registering gsi 18 triggering 0 polarity 1 [ 63.826103] xen: --> pirq=18 -> irq=18 (gsi=18) [ 63.826245] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 63.891307] PTP clock support registered [ 63.969133] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 63.969133] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 63.969254] xen: registering gsi 20 triggering 0 polarity 1 [ 63.969274] xen: --> pirq=20 -> irq=20 (gsi=20) [ 63.969427] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 64.019400] iTCO_vendor_support: vendor-support=0 [ 64.043073] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 64.043113] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 64.043234] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 64.078265] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 64.185891] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:58:ea:9e [ 64.185897] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 64.185932] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 64.186024] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 64.186026] e1000e 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 64.186160] xen: registering gsi 19 triggering 0 polarity 1 [ 64.186166] Already setup the GSI :19 [ 64.186350] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 64.246159] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 64.273794] xen: registering gsi 16 triggering 0 polarity 1 [ 64.273800] Already setup the GSI :16 [ 64.307559] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:58:ea:9f [ 64.307561] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 64.307646] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 64.323317] snd_hda_intel 0000:00:1b.0: enabling device (0140 -> 0142) [ 64.323416] xen: registering gsi 22 triggering 0 polarity 1 [ 64.323436] xen: --> pirq=22 -> irq=22 (gsi=22) [ 64.332495] e1000e 0000:02:00.0 enp2s0: renamed from eth1 [ 64.352520] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC889: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 64.352522] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 64.352523] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 64.352523] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 64.352524] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e [ 64.352524] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 64.352526] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 64.352527] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 64.352527] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 64.352528] snd_hda_codec_realtek hdaudioC1D0: dig-in=0x1f [ 64.360187] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 64.393303] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 64.419203] usbcore: registered new interface driver snd-usb-audio [ 64.449275] Adding 67108860k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:67108860k FS [ 64.474609] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 64.474680] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 64.474766] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 64.474871] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 64.474955] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 64.475037] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 64.475115] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 64.475192] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 64.475312] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 64.475391] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 64.601934] pciback 0000:03:00.0: seizing device [ 64.602020] pciback 0000:03:00.0: enabling device (0140 -> 0142) [ 64.602124] xen: registering gsi 16 triggering 0 polarity 1 [ 64.602130] Already setup the GSI :16 [ 64.608426] XFS (sda1): Mounting V5 Filesystem [ 64.640186] xen_pciback: backend is vpci [ 64.689020] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 65.070384] XFS (sda1): Ending clean mount [ 65.266812] XFS (dm-13): Mounting V5 Filesystem [ 65.425151] XFS (dm-11): Mounting V5 Filesystem [ 65.460438] XFS (dm-9): Mounting V4 Filesystem [ 65.488945] XFS (dm-3): Mounting V5 Filesystem [ 65.497099] XFS (dm-10): Mounting V4 Filesystem [ 65.700875] XFS (dm-6): Mounting V4 Filesystem [ 65.807844] XFS (dm-5): Mounting V4 Filesystem [ 65.915526] XFS (dm-8): Mounting V5 Filesystem [ 65.958830] XFS (dm-4): Mounting V5 Filesystem [ 65.966728] XFS (dm-13): Ending clean mount [ 66.050651] XFS (dm-9): Ending clean mount [ 66.123104] XFS (dm-10): Ending clean mount [ 66.313781] XFS (dm-11): Ending clean mount [ 66.321966] XFS (dm-5): Ending clean mount [ 66.351274] XFS (dm-4): Ending clean mount [ 66.515783] XFS (dm-8): Ending clean mount [ 66.529317] XFS (dm-6): Ending clean mount [ 66.550943] XFS (dm-3): Ending clean mount [ 67.083454] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 67.109941] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 67.146896] ip_tables: (C) 2000-2006 Netfilter Core Team [ 67.536285] xen:xen_evtchn: Event-channel device installed [ 67.713355] xen_acpi_processor: Uploading Xen processor PM info [ 67.956827] No iBFT detected. [ 68.230972] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 68.628501] br0: port 1(eno1) entered blocking state [ 68.628505] br0: port 1(eno1) entered disabled state [ 68.628644] device eno1 entered promiscuous mode [ 68.646387] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 89.738229] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 89.738278] br0: port 1(eno1) entered blocking state [ 89.738280] br0: port 1(eno1) entered forwarding state [ 89.738378] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 90.201509] NET: Registered protocol family 17 [ 99.386599] Bridge firewalling registered [ 101.738902] Ebtables v2.0 registered [ 118.678427] fuse init (API version 7.26) [ 134.717189] tun: Universal TUN/TAP device driver, 1.6 [ 134.717191] tun: (C) 1999-2004 Max Krasnyansky [ 134.878565] br0: port 2(vif1.0) entered blocking state [ 134.878574] br0: port 2(vif1.0) entered disabled state [ 134.878705] device vif1.0 entered promiscuous mode [ 134.880989] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 134.939697] br0: port 3(vif1.0-emu) entered blocking state [ 134.939706] br0: port 3(vif1.0-emu) entered disabled state [ 134.939867] device vif1.0-emu entered promiscuous mode [ 134.941713] br0: port 3(vif1.0-emu) entered blocking state [ 134.941716] br0: port 3(vif1.0-emu) entered forwarding state [ 135.029353] br0: port 3(vif1.0-emu) entered disabled state [ 135.030120] device vif1.0-emu left promiscuous mode [ 135.030129] br0: port 3(vif1.0-emu) entered disabled state [ 135.058706] br0: port 2(vif1.0) entered disabled state [ 135.058836] device vif1.0 left promiscuous mode [ 135.058845] br0: port 2(vif1.0) entered disabled state