[ 0.000000] Linux version 5.4.38-gentoo-host (root@apollo) (gcc version 9.3.0 (Gentoo 9.3.0 p2)) #1 SMP Sun May 24 15:22:19 CEST 2020 [ 0.000000] Command line: root=zhost/host/root by=id elevator=noop logo.nologo triggers=zfs quiet refresh softlevel=prexen nfs.callback_tcpport=32764 lockd.nlm_udpport=32768 lockd.nlm_tcpport=32768 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000078dfbfff] usable [ 0.000000] Xen: [mem 0x0000000078dfc000-0x000000007962ffff] reserved [ 0.000000] Xen: [mem 0x0000000079630000-0x0000000079765fff] usable [ 0.000000] Xen: [mem 0x0000000079766000-0x0000000079c4bfff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079c4c000-0x000000007bcf6fff] reserved [ 0.000000] Xen: [mem 0x000000007bcf7000-0x000000007bcf7fff] usable [ 0.000000] Xen: [mem 0x000000007bcf8000-0x000000007bd7dfff] reserved [ 0.000000] Xen: [mem 0x000000007bd7e000-0x000000007bffffff] usable [ 0.000000] Xen: [mem 0x000000007c000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000c7ffc000-0x00000000c7ffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fec40000-0x00000000fec40fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x0000000686eaafff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x79766000 ACPI 2.0=0x79766000 ESRT=0x7ba4ac98 SMBIOS=0xf05e0 SMBIOS 3.0=0x7ba46000 MPS=0xfca60 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Supermicro Super Server/X10DRi-T4+, BIOS 3.1 06/08/2018 [ 0.000000] Hypervisor detected: Xen PV [ 0.046589] tsc: Fast TSC calibration using PIT [ 0.046593] tsc: Detected 2099.922 MHz processor [ 0.046594] tsc: Detected 2100.008 MHz TSC [ 0.046623] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.046625] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.046632] last_pfn = 0x686eab max_arch_pfn = 0x400000000 [ 0.046633] Disabled [ 0.046634] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.046638] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.046640] last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.046677] Kernel/User page tables isolation: disabled on XEN PV. [ 0.047247] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.047248] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.048303] BRK [0x02a03000, 0x02a03fff] PGTABLE [ 0.048806] BRK [0x02a04000, 0x02a04fff] PGTABLE [ 0.049305] BRK [0x02a05000, 0x02a05fff] PGTABLE [ 0.049805] BRK [0x02a06000, 0x02a06fff] PGTABLE [ 0.050306] BRK [0x02a07000, 0x02a07fff] PGTABLE [ 0.050806] BRK [0x02a08000, 0x02a08fff] PGTABLE [ 0.051305] BRK [0x02a09000, 0x02a09fff] PGTABLE [ 0.051804] BRK [0x02a0a000, 0x02a0afff] PGTABLE [ 0.052302] BRK [0x02a0b000, 0x02a0bfff] PGTABLE [ 0.052800] BRK [0x02a0c000, 0x02a0cfff] PGTABLE [ 6.075842] Secure boot disabled [ 6.075845] RAMDISK: [mem 0x04000000-0x04b7dfff] [ 6.075858] ACPI: Early table checksum verification disabled [ 6.075869] ACPI: RSDP 0x0000000079766000 000024 (v02 SUPERM) [ 6.075880] ACPI: XSDT 0x00000000797660B0 0000E4 (v01 01072009 AMI 00010013) [ 6.075924] ACPI: FACP 0x0000000079797C58 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 6.075993] ACPI: DSDT 0x0000000079766230 031A22 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 6.076006] ACPI: FACS 0x0000000079C4AF80 000040 [ 6.076020] ACPI: APIC 0x0000000079797D68 000224 (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 6.076033] ACPI: FPDT 0x0000000079797F90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 6.076046] ACPI: FIDT 0x0000000079797FD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 6.076059] ACPI: SPMI 0x0000000079798078 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 6.076073] ACPI: MCFG 0x00000000797980C0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 6.076086] ACPI: UEFI 0x0000000079798100 000042 (v01 SUPERM SMCI--MB 01072009 00000000) [ 6.076099] ACPI: HPET 0x0000000079798148 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076112] ACPI: MSCT 0x0000000079798180 000090 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076125] ACPI: NFIT 0x0000000079798210 018028 (v01 00000000 00000000) [ 6.076138] ACPI: SLIT 0x00000000797B0238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076151] ACPI: SRAT 0x00000000797B0268 001158 (v03 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076165] ACPI: WDDT 0x00000000797B13C0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 6.076178] ACPI: SSDT 0x00000000797B1400 016FB3 (v02 SUPERM PmMgt 00000001 INTL 20120913) [ 6.076191] ACPI: NITR 0x00000000797C83B8 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076204] ACPI: SSDT 0x00000000797C8430 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 6.076217] ACPI: SSDT 0x00000000797CAA80 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 6.076230] ACPI: PRAD 0x00000000797CAAE8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 6.076244] ACPI: RMAD 0x00000000797CABF0 000148 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 6.076257] ACPI: HEST 0x00000000797CAD38 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 6.076269] ACPI: BERT 0x00000000797CAFB8 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 6.076290] ACPI: ERST 0x00000000797CAFE8 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 6.076305] ACPI: EINJ 0x00000000797CB218 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 6.076318] ACPI: BGRT 0x00000000797CB348 000038 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 6.076355] ACPI: Local APIC address 0xfee00000 [ 6.076357] Setting APIC routing to Xen PV. [ 6.076405] NUMA turned off [ 6.076407] Faking a node at [mem 0x0000000000000000-0x0000000686eaafff] [ 6.076412] NODE_DATA(0) allocated [mem 0x5fd003000-0x5fd007fff] [ 6.181383] Zone ranges: [ 6.181385] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 6.181386] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 6.181387] Normal [mem 0x0000000100000000-0x0000000686eaafff] [ 6.181389] Device empty [ 6.181389] Movable zone start for each node [ 6.181390] Early memory node ranges [ 6.181391] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 6.181393] node 0: [mem 0x0000000000100000-0x0000000078dfbfff] [ 6.181394] node 0: [mem 0x0000000079630000-0x0000000079765fff] [ 6.181394] node 0: [mem 0x000000007bcf7000-0x000000007bcf7fff] [ 6.181395] node 0: [mem 0x000000007bd7e000-0x000000007bffffff] [ 6.181396] node 0: [mem 0x0000000100000000-0x0000000686eaafff] [ 6.181883] Zeroed struct page in unavailable ranges: 32769 pages [ 6.181885] Initmem setup node 0 [mem 0x0000000000001000-0x0000000686eaafff] [ 6.181887] On node 0 totalpages: 6291455 [ 6.181888] DMA zone: 64 pages used for memmap [ 6.181889] DMA zone: 21 pages reserved [ 6.181890] DMA zone: 3999 pages, LIFO batch:0 [ 6.181973] DMA32 zone: 7687 pages used for memmap [ 6.181974] DMA32 zone: 491957 pages, LIFO batch:63 [ 6.192976] Normal zone: 90555 pages used for memmap [ 6.192978] Normal zone: 5795499 pages, LIFO batch:63 [ 6.280828] p2m virtual area at (____ptrval____), size is 3600000 [ 7.245558] Remapped 552619 page(s) [ 7.246351] ACPI: PM-Timer IO Port: 0x408 [ 7.246359] ACPI: Local APIC address 0xfee00000 [ 7.246445] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 7.246447] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 7.246449] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 7.246450] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 7.246451] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 7.246453] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 7.246455] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 7.246456] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 7.246458] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 7.246459] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 7.246461] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 7.246463] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 7.246464] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 7.246465] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 7.246467] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 7.246468] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 7.246470] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 7.246471] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 7.246473] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 7.246474] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 7.246475] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 7.246477] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 7.246478] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 7.246480] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 7.246481] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 7.246482] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 7.246483] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 7.246485] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 7.246486] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 7.246487] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 7.246489] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 7.246490] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 7.246526] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 7.246537] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 7.246548] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 [ 7.246567] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 7.246571] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 7.246575] ACPI: IRQ0 used by override. [ 7.246576] ACPI: IRQ9 used by override. [ 7.246594] Using ACPI (MADT) for SMP configuration information [ 7.246599] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 7.246614] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 7.246646] [mem 0x90000000-0xc7ffbfff] available for PCI devices [ 7.246650] Booting paravirtualized kernel on Xen [ 7.246651] Xen version: 4.12.2 (preserve-AD) [ 7.246656] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 7.368535] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:32 nr_node_ids:1 [ 7.370349] percpu: Embedded 53 pages/cpu s177240 r8192 d31656 u262144 [ 7.370357] pcpu-alloc: s177240 r8192 d31656 u262144 alloc=1*2097152 [ 7.370359] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 7.370364] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 7.370440] Built 1 zonelists, mobility grouping on. Total pages: 6193128 [ 7.370441] Policy zone: Normal [ 7.370444] Kernel command line: root=zhost/host/root by=id elevator=noop logo.nologo triggers=zfs quiet refresh softlevel=prexen nfs.callback_tcpport=32764 lockd.nlm_udpport=32768 lockd.nlm_tcpport=32768 [ 7.376229] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 7.379053] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 7.379591] mem auto-init: stack:off, heap alloc:off, heap free:off [ 7.436926] software IO TLB: mapped [mem 0x67f600000-0x683600000] (64MB) [ 7.527779] Memory: 24510696K/25165820K available (12291K kernel code, 1340K rwdata, 3048K rodata, 1692K init, 1444K bss, 655124K reserved, 0K cma-reserved) [ 7.527943] random: get_random_u64 called from cache_random_seq_create+0x7c/0x140 with crng_init=0 [ 7.528120] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 7.528709] ftrace: allocating 37897 entries in 149 pages [ 7.546264] rcu: Hierarchical RCU implementation. [ 7.546265] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 7.546267] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 7.546268] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 7.551758] Using NULL legacy PIC [ 7.551759] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 0 [ 7.551818] xen:events: Using FIFO-based ABI [ 7.551841] xen: --> pirq=1 -> irq=1 (gsi=1) [ 7.551849] xen: --> pirq=2 -> irq=2 (gsi=2) [ 7.551857] xen: --> pirq=3 -> irq=3 (gsi=3) [ 7.551864] xen: --> pirq=4 -> irq=4 (gsi=4) [ 7.551873] xen: --> pirq=5 -> irq=5 (gsi=5) [ 7.551880] xen: --> pirq=6 -> irq=6 (gsi=6) [ 7.551887] xen: --> pirq=7 -> irq=7 (gsi=7) [ 7.551895] xen: --> pirq=8 -> irq=8 (gsi=8) [ 7.551902] xen: --> pirq=9 -> irq=9 (gsi=9) [ 7.551909] xen: --> pirq=10 -> irq=10 (gsi=10) [ 7.551917] xen: --> pirq=11 -> irq=11 (gsi=11) [ 7.551924] xen: --> pirq=12 -> irq=12 (gsi=12) [ 7.551931] xen: --> pirq=13 -> irq=13 (gsi=13) [ 7.551938] xen: --> pirq=14 -> irq=14 (gsi=14) [ 7.551945] xen: --> pirq=15 -> irq=15 (gsi=15) [ 7.551949] rcu: Offload RCU callbacks from CPUs: (none). [ 7.552034] Console: colour dummy device 80x25 [ 7.552042] printk: console [tty0] enabled [ 7.552044] printk: console [hvc0] enabled [ 7.552087] ACPI: Core revision 20190816 [ 7.586235] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x02, should be 0xA6 (20190816/tbprint-173) [ 7.586325] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 7.586336] Xen: using vcpuop timer interface [ 7.586340] installing Xen timer for CPU 0 [ 7.586372] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e45380b760, max_idle_ns: 440795224466 ns [ 7.586376] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.01 BogoMIPS (lpj=2100008) [ 7.586378] pid_max: default: 32768 minimum: 301 [ 7.586472] LSM: Security Framework initializing [ 7.586497] Yama: becoming mindful. [ 7.586509] SELinux: Initializing. [ 7.586701] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 7.586788] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 7.587431] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 7.587432] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 7.587437] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 7.587438] Spectre V2 : Mitigation: Full generic retpoline [ 7.587439] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 7.587440] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 7.587441] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 7.587442] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 7.587444] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 7.587448] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 7.587449] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 7.587686] Freeing SMP alternatives memory: 36K [ 7.589223] VPMU disabled by hypervisor. [ 7.589422] Performance Events: unsupported p6 CPU model 79 no PMU driver, software events only. [ 7.589502] rcu: Hierarchical SRCU implementation. [ 7.590211] smp: Bringing up secondary CPUs ... [ 7.590366] installing Xen timer for CPU 1 [ 7.590795] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 7.590795] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 7.591428] installing Xen timer for CPU 2 [ 7.591735] installing Xen timer for CPU 3 [ 7.591821] smp: Brought up 1 node, 4 CPUs [ 7.591821] smpboot: Max logical packages: 8 [ 7.593379] devtmpfs: initialized [ 7.593431] x86/mm: Memory block size: 128MB [ 7.596544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 7.596544] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 7.596624] pinctrl core: initialized pinctrl subsystem [ 7.596696] PM: RTC time: 16:41:12, date: 2020-08-01 [ 7.596800] NET: Registered protocol family 16 [ 7.596818] xen:grant_table: Grant tables using version 1 layout [ 7.596867] Grant table initialized [ 7.597083] audit: initializing netlink subsys (disabled) [ 7.597395] audit: type=2000 audit(1596300072.281:1): state=initialized audit_enabled=0 res=1 [ 7.597520] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 7.597521] ACPI: bus type PCI registered [ 7.597522] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 7.597936] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 7.597939] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 7.642379] random: fast init done [ 7.666704] PCI: Using configuration type 1 for base access [ 8.115684] cryptd: max_cpu_qlen set to 1000 [ 8.128620] ACPI: Added _OSI(Module Device) [ 8.128620] ACPI: Added _OSI(Processor Device) [ 8.128620] ACPI: Added _OSI(3.0 _SCP Extensions) [ 8.128620] ACPI: Added _OSI(Processor Aggregator Device) [ 8.128620] ACPI: Added _OSI(Linux-Dell-Video) [ 8.128620] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 8.128620] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 8.196609] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 8.200016] xen: registering gsi 9 triggering 0 polarity 0 [ 8.200738] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 8.204374] ACPI: Dynamic OEM Table Load: [ 8.241002] ACPI: Interpreter enabled [ 8.241008] ACPI: (supports S0 S5) [ 8.241009] ACPI: Using IOAPIC for interrupt routing [ 8.241043] HEST: Enabling Firmware First mode for corrected errors. [ 8.241083] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 2. [ 8.241084] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 3. [ 8.241085] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 4. [ 8.241085] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 5. [ 8.241086] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 6. [ 8.241087] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 7. [ 8.241088] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 8. [ 8.241088] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 9. [ 8.241089] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 10. [ 8.241090] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 11. [ 8.241091] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 12. [ 8.241091] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 13. [ 8.241092] mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 14. [ 8.241162] HEST: Table parsing has been initialized. [ 8.241165] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 8.242006] ACPI: Enabled 5 GPEs in block 00 to 3F [ 8.284487] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) [ 8.284491] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 8.287791] acpi PNP0A03:02: _OSC: platform does not support [AER LTR] [ 8.290310] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 8.290311] acpi PNP0A03:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 8.290359] PCI host bridge to bus 0000:ff [ 8.290361] pci_bus 0000:ff: root bus resource [bus ff] [ 8.290414] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000 [ 8.290669] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100 [ 8.290906] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000 [ 8.291211] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000 [ 8.291439] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100 [ 8.291684] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000 [ 8.291993] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 8.292212] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 8.292432] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 8.292659] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 8.292888] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 8.293104] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 8.293319] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 8.293549] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 8.293765] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 [ 8.293983] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 [ 8.294199] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 [ 8.294419] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 [ 8.294659] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 8.294875] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 [ 8.295099] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 8.295315] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 8.295544] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 8.295767] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 8.295983] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 8.296212] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 8.296431] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 8.296655] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 8.296873] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 8.296980] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 8.297234] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 8.297558] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 8.297859] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 8.298166] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 8.298472] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 8.298779] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 8.299069] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 8.299287] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 8.299532] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 8.299836] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 8.300136] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 8.300443] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 8.300741] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 8.300964] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 8.301182] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 8.301405] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 8.301646] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 8.301951] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 8.302252] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 8.302563] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 8.302878] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 [ 8.303175] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 [ 8.303397] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 [ 8.303631] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 [ 8.303921] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 [ 8.304141] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 [ 8.304359] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 [ 8.304589] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 [ 8.304834] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 8.305051] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 8.305268] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 8.305488] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 8.305606] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 8.305839] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 8.306060] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 8.306374] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) [ 8.306382] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 8.307809] acpi PNP0A03:03: _OSC: platform does not support [AER LTR] [ 8.310329] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 8.310331] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 8.310372] PCI host bridge to bus 0000:7f [ 8.310374] pci_bus 0000:7f: root bus resource [bus 7f] [ 8.310423] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000 [ 8.310660] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100 [ 8.310891] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000 [ 8.311191] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000 [ 8.311417] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100 [ 8.311656] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000 [ 8.311966] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000 [ 8.312180] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100 [ 8.312398] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100 [ 8.312620] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000 [ 8.312848] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000 [ 8.313063] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000 [ 8.313276] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000 [ 8.313494] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000 [ 8.313717] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000 [ 8.313931] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000 [ 8.314144] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000 [ 8.314357] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000 [ 8.314587] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000 [ 8.314802] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000 [ 8.315023] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000 [ 8.315249] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000 [ 8.315470] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000 [ 8.315698] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000 [ 8.315912] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100 [ 8.316136] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000 [ 8.316349] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100 [ 8.316574] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000 [ 8.316794] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000 [ 8.316899] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100 [ 8.317152] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000 [ 8.317459] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000 [ 8.317765] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000 [ 8.318060] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000 [ 8.318355] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000 [ 8.318660] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000 [ 8.318943] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000 [ 8.319166] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000 [ 8.319400] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000 [ 8.319707] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000 [ 8.320003] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000 [ 8.320298] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000 [ 8.320588] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000 [ 8.320808] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000 [ 8.321025] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000 [ 8.321240] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000 [ 8.321480] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000 [ 8.321783] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000 [ 8.322082] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000 [ 8.322379] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000 [ 8.322693] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000 [ 8.322988] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000 [ 8.323204] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000 [ 8.323441] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000 [ 8.323737] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000 [ 8.323954] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000 [ 8.324169] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000 [ 8.324386] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000 [ 8.324638] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000 [ 8.324854] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000 [ 8.325069] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000 [ 8.325283] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000 [ 8.325396] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000 [ 8.325634] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000 [ 8.325855] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000 [ 8.328387] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 4/0x8 ignored. [ 8.328388] ACPI: Unable to map lapic to logical cpu number [ 8.328755] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 5/0xa ignored. [ 8.328757] ACPI: Unable to map lapic to logical cpu number [ 8.329124] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 6/0xc ignored. [ 8.329125] ACPI: Unable to map lapic to logical cpu number [ 8.329711] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 7/0xe ignored. [ 8.329712] ACPI: Unable to map lapic to logical cpu number [ 8.330062] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 8/0x1 ignored. [ 8.330062] ACPI: Unable to map lapic to logical cpu number [ 8.330425] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 9/0x3 ignored. [ 8.330427] ACPI: Unable to map lapic to logical cpu number [ 8.330781] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 10/0x5 ignored. [ 8.330783] ACPI: Unable to map lapic to logical cpu number [ 8.331132] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 11/0x7 ignored. [ 8.331133] ACPI: Unable to map lapic to logical cpu number [ 8.331498] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 12/0x9 ignored. [ 8.331498] ACPI: Unable to map lapic to logical cpu number [ 8.331848] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 13/0xb ignored. [ 8.331851] ACPI: Unable to map lapic to logical cpu number [ 8.332210] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 14/0xd ignored. [ 8.332213] ACPI: Unable to map lapic to logical cpu number [ 8.332574] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 15/0xf ignored. [ 8.332577] ACPI: Unable to map lapic to logical cpu number [ 8.334900] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 16/0x10 ignored. [ 8.334901] ACPI: Unable to map lapic to logical cpu number [ 8.335259] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 17/0x12 ignored. [ 8.335260] ACPI: Unable to map lapic to logical cpu number [ 8.335621] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 18/0x14 ignored. [ 8.335621] ACPI: Unable to map lapic to logical cpu number [ 8.335972] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 19/0x16 ignored. [ 8.335975] ACPI: Unable to map lapic to logical cpu number [ 8.336335] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 20/0x18 ignored. [ 8.336336] ACPI: Unable to map lapic to logical cpu number [ 8.336700] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 21/0x1a ignored. [ 8.336700] ACPI: Unable to map lapic to logical cpu number [ 8.337052] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 22/0x1c ignored. [ 8.337055] ACPI: Unable to map lapic to logical cpu number [ 8.337421] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 23/0x1e ignored. [ 8.337422] ACPI: Unable to map lapic to logical cpu number [ 8.337775] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 24/0x11 ignored. [ 8.337777] ACPI: Unable to map lapic to logical cpu number [ 8.338129] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 25/0x13 ignored. [ 8.338129] ACPI: Unable to map lapic to logical cpu number [ 8.338494] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 26/0x15 ignored. [ 8.338494] ACPI: Unable to map lapic to logical cpu number [ 8.338849] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 27/0x17 ignored. [ 8.338852] ACPI: Unable to map lapic to logical cpu number [ 8.339214] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 28/0x19 ignored. [ 8.339215] ACPI: Unable to map lapic to logical cpu number [ 8.339576] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 29/0x1b ignored. [ 8.339577] ACPI: Unable to map lapic to logical cpu number [ 8.339931] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 30/0x1d ignored. [ 8.339932] ACPI: Unable to map lapic to logical cpu number [ 8.340290] APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 31/0x1f ignored. [ 8.340293] ACPI: Unable to map lapic to logical cpu number [ 8.342331] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 8.342335] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 8.343220] acpi PNP0A08:00: _OSC: platform does not support [AER LTR] [ 8.344688] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 8.344692] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 8.345133] PCI host bridge to bus 0000:00 [ 8.345138] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 8.345139] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window] [ 8.345141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 8.345142] pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window] [ 8.345144] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window] [ 8.345145] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window] [ 8.345147] pci_bus 0000:00: root bus resource [bus 00-7e] [ 8.345180] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 8.345615] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 8.345920] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 8.346158] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 8.346467] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 8.346705] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 8.347000] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 8.347248] pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000 [ 8.347314] pci 0000:00:04.0: reg 0x10: [mem 0xc712c000-0xc712ffff 64bit] [ 8.347740] pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000 [ 8.347805] pci 0000:00:04.1: reg 0x10: [mem 0xc7128000-0xc712bfff 64bit] [ 8.348225] pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000 [ 8.348293] pci 0000:00:04.2: reg 0x10: [mem 0xc7124000-0xc7127fff 64bit] [ 8.348715] pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000 [ 8.348780] pci 0000:00:04.3: reg 0x10: [mem 0xc7120000-0xc7123fff 64bit] [ 8.349200] pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000 [ 8.349268] pci 0000:00:04.4: reg 0x10: [mem 0xc711c000-0xc711ffff 64bit] [ 8.349693] pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000 [ 8.349757] pci 0000:00:04.5: reg 0x10: [mem 0xc7118000-0xc711bfff 64bit] [ 8.350176] pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000 [ 8.350244] pci 0000:00:04.6: reg 0x10: [mem 0xc7114000-0xc7117fff 64bit] [ 8.350668] pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000 [ 8.350732] pci 0000:00:04.7: reg 0x10: [mem 0xc7110000-0xc7113fff 64bit] [ 8.351145] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 8.351514] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 8.351924] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 8.352293] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 [ 8.352340] pci 0000:00:05.4: reg 0x10: [mem 0xc7139000-0xc7139fff] [ 8.352783] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 8.353274] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 8.353346] pci 0000:00:11.4: reg 0x10: [io 0x7110-0x7117] [ 8.353374] pci 0000:00:11.4: reg 0x14: [io 0x7100-0x7103] [ 8.353406] pci 0000:00:11.4: reg 0x18: [io 0x70f0-0x70f7] [ 8.353435] pci 0000:00:11.4: reg 0x1c: [io 0x70e0-0x70e3] [ 8.353463] pci 0000:00:11.4: reg 0x20: [io 0x7020-0x703f] [ 8.353492] pci 0000:00:11.4: reg 0x24: [mem 0xc7138000-0xc71387ff] [ 8.353652] pci 0000:00:11.4: PME# supported from D3hot [ 8.353862] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 8.353943] pci 0000:00:14.0: reg 0x10: [mem 0xc7100000-0xc710ffff 64bit] [ 8.354188] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 8.354374] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 8.354460] pci 0000:00:16.0: reg 0x10: [mem 0xc7137000-0xc713700f 64bit] [ 8.354707] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 8.354886] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 [ 8.354968] pci 0000:00:16.1: reg 0x10: [mem 0xc7136000-0xc713600f 64bit] [ 8.355215] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 8.355437] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 8.355510] pci 0000:00:1a.0: reg 0x10: [mem 0xc7134000-0xc71343ff] [ 8.355805] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 8.356004] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 8.356330] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 8.356398] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 8.356404] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 8.356597] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 8.356925] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 8.356988] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 8.356994] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 8.357182] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 8.357260] pci 0000:00:1d.0: reg 0x10: [mem 0xc7133000-0xc71333ff] [ 8.357559] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 8.357754] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 8.358237] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 8.358311] pci 0000:00:1f.2: reg 0x10: [io 0x7070-0x7077] [ 8.358338] pci 0000:00:1f.2: reg 0x14: [io 0x7060-0x7063] [ 8.358365] pci 0000:00:1f.2: reg 0x18: [io 0x7050-0x7057] [ 8.358393] pci 0000:00:1f.2: reg 0x1c: [io 0x7040-0x7043] [ 8.358421] pci 0000:00:1f.2: reg 0x20: [io 0x7000-0x701f] [ 8.358448] pci 0000:00:1f.2: reg 0x24: [mem 0xc7132000-0xc71327ff] [ 8.358602] pci 0000:00:1f.2: PME# supported from D3hot [ 8.358773] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 8.358835] pci 0000:00:1f.3: reg 0x10: [mem 0xc7131000-0xc71310ff 64bit] [ 8.358896] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 8.359439] pci 0000:00:01.0: PCI bridge to [bus 01] [ 8.359877] pci 0000:02:00.0: [8086:1528] type 00 class 0x020000 [ 8.359952] pci 0000:02:00.0: reg 0x10: [mem 0xc7c00000-0xc7dfffff 64bit pref] [ 8.359979] pci 0000:02:00.0: reg 0x18: [io 0x6020-0x603f] [ 8.360046] pci 0000:02:00.0: reg 0x20: [mem 0xc7e04000-0xc7e07fff 64bit pref] [ 8.360279] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 8.360364] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 8.360366] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 8.360407] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 8.360408] pci 0000:02:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 8.360808] pci 0000:02:00.1: [8086:1528] type 00 class 0x020000 [ 8.360880] pci 0000:02:00.1: reg 0x10: [mem 0xc7a00000-0xc7bfffff 64bit pref] [ 8.360908] pci 0000:02:00.1: reg 0x18: [io 0x6000-0x601f] [ 8.360975] pci 0000:02:00.1: reg 0x20: [mem 0xc7e00000-0xc7e03fff 64bit pref] [ 8.361202] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 8.361277] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 8.361279] pci 0000:02:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 8.361318] pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 8.361319] pci 0000:02:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 8.361680] pci 0000:00:03.0: PCI bridge to [bus 02] [ 8.361688] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] [ 8.361710] pci 0000:00:03.0: bridge window [mem 0xc7a00000-0xc7efffff 64bit pref] [ 8.362116] pci 0000:03:00.0: [8086:1528] type 00 class 0x020000 [ 8.362189] pci 0000:03:00.0: reg 0x10: [mem 0xc7600000-0xc77fffff 64bit pref] [ 8.362216] pci 0000:03:00.0: reg 0x18: [io 0x5020-0x503f] [ 8.362288] pci 0000:03:00.0: reg 0x20: [mem 0xc7804000-0xc7807fff 64bit pref] [ 8.362520] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 8.362606] pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 8.362608] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 8.362646] pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 8.362648] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 8.363035] pci 0000:03:00.1: [8086:1528] type 00 class 0x020000 [ 8.363107] pci 0000:03:00.1: reg 0x10: [mem 0xc7400000-0xc75fffff 64bit pref] [ 8.363134] pci 0000:03:00.1: reg 0x18: [io 0x5000-0x501f] [ 8.363201] pci 0000:03:00.1: reg 0x20: [mem 0xc7800000-0xc7803fff 64bit pref] [ 8.363436] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 8.363509] pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 8.363511] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 8.363549] pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 8.363551] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 8.363901] pci 0000:00:03.2: PCI bridge to [bus 03] [ 8.363909] pci 0000:00:03.2: bridge window [io 0x5000-0x5fff] [ 8.363931] pci 0000:00:03.2: bridge window [mem 0xc7400000-0xc78fffff 64bit pref] [ 8.364044] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 8.364238] pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400 [ 8.364450] pci 0000:05:00.0: enabling Extended Tags [ 8.364648] pci 0000:05:00.0: supports D1 D2 [ 8.364649] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.364885] pci 0000:00:1c.4: PCI bridge to [bus 05-06] [ 8.364894] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 8.364903] pci 0000:00:1c.4: bridge window [mem 0xc6000000-0xc70fffff] [ 8.365052] pci_bus 0000:06: extended config space not accessible [ 8.365108] pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000 [ 8.365171] pci 0000:06:00.0: reg 0x10: [mem 0xc6000000-0xc6ffffff] [ 8.365204] pci 0000:06:00.0: reg 0x14: [mem 0xc7000000-0xc701ffff] [ 8.365238] pci 0000:06:00.0: reg 0x18: [io 0x4000-0x407f] [ 8.365395] pci 0000:06:00.0: BAR 0: assigned to efifb [ 8.365521] pci 0000:06:00.0: supports D1 D2 [ 8.365522] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.365786] pci 0000:05:00.0: PCI bridge to [bus 06] [ 8.365806] pci 0000:05:00.0: bridge window [io 0x4000-0x4fff] [ 8.365817] pci 0000:05:00.0: bridge window [mem 0xc6000000-0xc70fffff] [ 8.366047] xen: registering gsi 13 triggering 1 polarity 0 [ 8.366942] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) [ 8.366945] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 8.367823] acpi PNP0A08:01: _OSC: platform does not support [AER LTR] [ 8.369279] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 8.369286] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 8.369543] PCI host bridge to bus 0000:80 [ 8.369545] pci_bus 0000:80: root bus resource [io 0x8000-0xffff window] [ 8.369547] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window] [ 8.369548] pci_bus 0000:80: root bus resource [bus 80-fe] [ 8.369599] pci 0000:80:03.0: [8086:6f08] type 01 class 0x060400 [ 8.369910] pci 0000:80:03.0: PME# supported from D0 D3hot D3cold [ 8.370153] pci 0000:80:03.2: [8086:6f0a] type 01 class 0x060400 [ 8.370462] pci 0000:80:03.2: PME# supported from D0 D3hot D3cold [ 8.370716] pci 0000:80:04.0: [8086:6f20] type 00 class 0x088000 [ 8.370782] pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit] [ 8.371207] pci 0000:80:04.1: [8086:6f21] type 00 class 0x088000 [ 8.371273] pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit] [ 8.371710] pci 0000:80:04.2: [8086:6f22] type 00 class 0x088000 [ 8.371776] pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit] [ 8.372195] pci 0000:80:04.3: [8086:6f23] type 00 class 0x088000 [ 8.372260] pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit] [ 8.372690] pci 0000:80:04.4: [8086:6f24] type 00 class 0x088000 [ 8.372755] pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit] [ 8.373174] pci 0000:80:04.5: [8086:6f25] type 00 class 0x088000 [ 8.373240] pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit] [ 8.373671] pci 0000:80:04.6: [8086:6f26] type 00 class 0x088000 [ 8.373737] pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit] [ 8.374155] pci 0000:80:04.7: [8086:6f27] type 00 class 0x088000 [ 8.374220] pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit] [ 8.374643] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000 [ 8.375001] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000 [ 8.375427] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000 [ 8.375792] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020 [ 8.375840] pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff] [ 8.376676] pci 0000:81:00.0: [1000:0097] type 00 class 0x010700 [ 8.376730] pci 0000:81:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 8.376770] pci 0000:81:00.0: reg 0x14: [mem 0xfbe40000-0xfbe4ffff 64bit] [ 8.376810] pci 0000:81:00.0: reg 0x1c: [mem 0xfbe00000-0xfbe3ffff 64bit] [ 8.376860] pci 0000:81:00.0: reg 0x30: [mem 0xfbd00000-0xfbdfffff pref] [ 8.376883] pci 0000:81:00.0: enabling Extended Tags [ 8.377131] pci 0000:81:00.0: supports D1 D2 [ 8.377328] pci 0000:80:03.0: PCI bridge to [bus 81] [ 8.377337] pci 0000:80:03.0: bridge window [io 0xf000-0xffff] [ 8.377345] pci 0000:80:03.0: bridge window [mem 0xfbd00000-0xfbefffff] [ 8.377737] pci 0000:82:00.0: [1000:0097] type 00 class 0x010700 [ 8.377794] pci 0000:82:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 8.377836] pci 0000:82:00.0: reg 0x14: [mem 0xfbc40000-0xfbc4ffff 64bit] [ 8.377875] pci 0000:82:00.0: reg 0x1c: [mem 0xfbc00000-0xfbc3ffff 64bit] [ 8.377926] pci 0000:82:00.0: reg 0x30: [mem 0xfbb00000-0xfbbfffff pref] [ 8.377948] pci 0000:82:00.0: enabling Extended Tags [ 8.378197] pci 0000:82:00.0: supports D1 D2 [ 8.378399] pci 0000:80:03.2: PCI bridge to [bus 82] [ 8.378407] pci 0000:80:03.2: bridge window [io 0xe000-0xefff] [ 8.378416] pci 0000:80:03.2: bridge window [mem 0xfbb00000-0xfbcfffff] [ 8.378876] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 8.378962] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 8.379044] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 8.379126] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 8.379207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 8.379292] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 8.379388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 8.379473] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 8.379762] xen:balloon: Initialising balloon driver [ 8.379887] iommu: Default domain type: Translated [ 8.379908] pci 0000:06:00.0: vgaarb: setting as boot VGA device [ 8.379908] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 8.379908] pci 0000:06:00.0: vgaarb: bridge control possible [ 8.379908] vgaarb: loaded [ 8.379908] SCSI subsystem initialized [ 8.379908] libata version 3.00 loaded. [ 8.379908] ACPI: bus type USB registered [ 8.379908] usbcore: registered new interface driver usbfs [ 8.379908] usbcore: registered new interface driver hub [ 8.379908] usbcore: registered new device driver usb [ 8.379908] EDAC MC: Ver: 3.0.0 [ 8.381692] Registered efivars operations [ 8.381692] PCI: Using ACPI for IRQ routing [ 8.408496] PCI: pci_cache_line_size set to 64 bytes [ 8.409763] e820: reserve RAM buffer [mem 0x78dfc000-0x7bffffff] [ 8.409765] e820: reserve RAM buffer [mem 0x79766000-0x7bffffff] [ 8.409767] e820: reserve RAM buffer [mem 0x7bcf8000-0x7bffffff] [ 8.409768] e820: reserve RAM buffer [mem 0x686eab000-0x687ffffff] [ 8.409927] NetLabel: Initializing [ 8.409928] NetLabel: domain hash size = 128 [ 8.409928] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 8.409945] NetLabel: unlabeled traffic allowed by default [ 8.410525] clocksource: Switched to clocksource tsc-early [ 8.428758] VFS: Disk quotas dquot_6.6.0 [ 8.428772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 8.428802] hugetlbfs: disabling because there are no supported hugepage sizes [ 8.428818] pnp: PnP ACPI init [ 8.429238] xen: registering gsi 8 triggering 1 polarity 0 [ 8.429281] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 8.429447] system 00:01: [io 0x0500-0x057f] has been reserved [ 8.429448] system 00:01: [io 0x0400-0x047f] has been reserved [ 8.429450] system 00:01: [io 0x0580-0x059f] has been reserved [ 8.429452] system 00:01: [io 0x0600-0x061f] has been reserved [ 8.429453] system 00:01: [io 0x0880-0x0883] has been reserved [ 8.429454] system 00:01: [io 0x0800-0x081f] has been reserved [ 8.429456] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 8.429458] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 8.429459] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 8.429461] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 8.429462] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 8.429463] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 8.429465] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 8.429469] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 8.429858] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 8.429859] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 8.429861] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 8.429862] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 8.429863] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 8.429866] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 8.430181] xen: registering gsi 4 triggering 1 polarity 0 [ 8.430202] pnp 00:03: [dma 0 disabled] [ 8.430251] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 8.430571] xen: registering gsi 3 triggering 1 polarity 0 [ 8.430589] pnp 00:04: [dma 0 disabled] [ 8.430632] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 8.431368] pnp: PnP ACPI: found 5 devices [ 8.434048] thermal_sys: Registered thermal governor 'fair_share' [ 8.434049] thermal_sys: Registered thermal governor 'bang_bang' [ 8.434050] thermal_sys: Registered thermal governor 'step_wise' [ 8.434050] thermal_sys: Registered thermal governor 'user_space' [ 8.448319] PM-Timer failed consistency check (0xffffff) - aborting. [ 8.448391] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000 add_align 100000 [ 8.448393] pci 0000:00:03.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000 [ 8.448408] pci 0000:00:03.0: BAR 14: assigned [mem 0x90000000-0x903fffff] [ 8.448410] pci 0000:00:03.2: BAR 14: assigned [mem 0x90400000-0x907fffff] [ 8.448412] pci 0000:00:01.0: PCI bridge to [bus 01] [ 8.448454] pci 0000:02:00.0: BAR 7: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 8.448463] pci 0000:02:00.0: BAR 10: assigned [mem 0x90100000-0x901fffff 64bit pref] [ 8.448470] pci 0000:02:00.1: BAR 7: assigned [mem 0x90200000-0x902fffff 64bit pref] [ 8.448477] pci 0000:02:00.1: BAR 10: assigned [mem 0x90300000-0x903fffff 64bit pref] [ 8.448484] pci 0000:00:03.0: PCI bridge to [bus 02] [ 8.448489] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff] [ 8.448501] pci 0000:00:03.0: bridge window [mem 0x90000000-0x903fffff] [ 8.448509] pci 0000:00:03.0: bridge window [mem 0xc7a00000-0xc7efffff 64bit pref] [ 8.448526] pci 0000:03:00.0: BAR 7: assigned [mem 0x90400000-0x904fffff 64bit pref] [ 8.448533] pci 0000:03:00.0: BAR 10: assigned [mem 0x90500000-0x905fffff 64bit pref] [ 8.448540] pci 0000:03:00.1: BAR 7: assigned [mem 0x90600000-0x906fffff 64bit pref] [ 8.448546] pci 0000:03:00.1: BAR 10: assigned [mem 0x90700000-0x907fffff 64bit pref] [ 8.448553] pci 0000:00:03.2: PCI bridge to [bus 03] [ 8.448558] pci 0000:00:03.2: bridge window [io 0x5000-0x5fff] [ 8.448569] pci 0000:00:03.2: bridge window [mem 0x90400000-0x907fffff] [ 8.448577] pci 0000:00:03.2: bridge window [mem 0xc7400000-0xc78fffff 64bit pref] [ 8.448593] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 8.448628] pci 0000:05:00.0: PCI bridge to [bus 06] [ 8.448634] pci 0000:05:00.0: bridge window [io 0x4000-0x4fff] [ 8.448648] pci 0000:05:00.0: bridge window [mem 0xc6000000-0xc70fffff] [ 8.448676] pci 0000:00:1c.4: PCI bridge to [bus 05-06] [ 8.448681] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 8.448693] pci 0000:00:1c.4: bridge window [mem 0xc6000000-0xc70fffff] [ 8.448717] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 8.448719] pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window] [ 8.448720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 8.448721] pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f window] [ 8.448722] pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f window] [ 8.448723] pci_bus 0000:00: resource 9 [mem 0x90000000-0xc7ffbfff window] [ 8.448724] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 8.448726] pci_bus 0000:02: resource 1 [mem 0x90000000-0x903fffff] [ 8.448727] pci_bus 0000:02: resource 2 [mem 0xc7a00000-0xc7efffff 64bit pref] [ 8.448728] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 8.448730] pci_bus 0000:03: resource 1 [mem 0x90400000-0x907fffff] [ 8.448731] pci_bus 0000:03: resource 2 [mem 0xc7400000-0xc78fffff 64bit pref] [ 8.448732] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 8.448734] pci_bus 0000:05: resource 1 [mem 0xc6000000-0xc70fffff] [ 8.448735] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 8.448736] pci_bus 0000:06: resource 1 [mem 0xc6000000-0xc70fffff] [ 8.448854] pci 0000:80:03.0: PCI bridge to [bus 81] [ 8.448859] pci 0000:80:03.0: bridge window [io 0xf000-0xffff] [ 8.448870] pci 0000:80:03.0: bridge window [mem 0xfbd00000-0xfbefffff] [ 8.448892] pci 0000:80:03.2: PCI bridge to [bus 82] [ 8.448896] pci 0000:80:03.2: bridge window [io 0xe000-0xefff] [ 8.448908] pci 0000:80:03.2: bridge window [mem 0xfbb00000-0xfbcfffff] [ 8.448930] pci_bus 0000:80: resource 4 [io 0x8000-0xffff window] [ 8.448931] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window] [ 8.448933] pci_bus 0000:81: resource 0 [io 0xf000-0xffff] [ 8.448934] pci_bus 0000:81: resource 1 [mem 0xfbd00000-0xfbefffff] [ 8.448935] pci_bus 0000:82: resource 0 [io 0xe000-0xefff] [ 8.448937] pci_bus 0000:82: resource 1 [mem 0xfbb00000-0xfbcfffff] [ 8.449031] NET: Registered protocol family 2 [ 8.449202] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 8.449256] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 8.449589] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 8.449747] TCP: Hash tables configured (established 262144 bind 65536) [ 8.449799] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 8.449882] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 8.450126] NET: Registered protocol family 1 [ 8.450768] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 8.450878] xen: registering gsi 19 triggering 0 polarity 1 [ 8.450899] xen: --> pirq=19 -> irq=19 (gsi=19) [ 8.451178] xen: registering gsi 18 triggering 0 polarity 1 [ 8.451191] xen: --> pirq=18 -> irq=18 (gsi=18) [ 8.467598] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x647 took 16080 usecs [ 8.467727] xen: registering gsi 18 triggering 0 polarity 1 [ 8.467732] Already setup the GSI :18 [ 8.484591] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x647 took 16560 usecs [ 8.484636] pci 0000:02:00.0: CLS mismatch (64 != 32), using 64 bytes [ 8.484684] pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 8.484725] pci 0000:80:05.0: disabled boot interrupts on device [8086:6f28] [ 8.484772] Unpacking initramfs... [ 8.702774] Freeing initrd memory: 11768K [ 8.703920] Initialise system trusted keyrings [ 8.704044] workingset: timestamp_bits=40 max_order=23 bucket_order=0 [ 8.706331] zbud: loaded [ 8.712922] NET: Registered protocol family 38 [ 8.712926] Key type asymmetric registered [ 8.712927] Asymmetric key parser 'x509' registered [ 8.712936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.713002] io scheduler mq-deadline registered [ 8.713004] io scheduler kyber registered [ 8.713119] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 8.713582] xen: registering gsi 26 triggering 0 polarity 1 [ 8.713609] xen: --> pirq=26 -> irq=26 (gsi=26) [ 8.713900] pcieport 0000:00:01.0: PME: Signaling with IRQ 98 [ 8.714115] xen: registering gsi 40 triggering 0 polarity 1 [ 8.714129] xen: --> pirq=40 -> irq=40 (gsi=40) [ 8.714402] pcieport 0000:00:03.0: PME: Signaling with IRQ 99 [ 8.714617] xen: registering gsi 40 triggering 0 polarity 1 [ 8.714620] Already setup the GSI :40 [ 8.714860] pcieport 0000:00:03.2: PME: Signaling with IRQ 100 [ 8.715057] xen: registering gsi 16 triggering 0 polarity 1 [ 8.715074] xen: --> pirq=16 -> irq=16 (gsi=16) [ 8.715228] pcieport 0000:00:1c.0: PME: Signaling with IRQ 101 [ 8.715452] xen: registering gsi 16 triggering 0 polarity 1 [ 8.715455] Already setup the GSI :16 [ 8.715600] pcieport 0000:00:1c.4: PME: Signaling with IRQ 102 [ 8.715801] xen: registering gsi 64 triggering 0 polarity 1 [ 8.715813] xen: --> pirq=64 -> irq=64 (gsi=64) [ 8.716064] pcieport 0000:80:03.0: PME: Signaling with IRQ 103 [ 8.716257] xen: registering gsi 64 triggering 0 polarity 1 [ 8.716259] Already setup the GSI :64 [ 8.716504] pcieport 0000:80:03.2: PME: Signaling with IRQ 104 [ 8.716665] efifb: probing for efifb [ 8.716668] efi: EFI_MEMMAP is not enabled. [ 8.717170] efifb: framebuffer at 0xc6000000, using 1876k, total 1875k [ 8.717171] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 8.717171] efifb: scrolling: redraw [ 8.717173] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 8.717294] Console: switching to colour frame buffer device 100x37 [ 8.727459] fb0: EFI VGA frame buffer device [ 8.727474] intel_idle: MWAIT substates: 0x2120 [ 8.727475] intel_idle: v0.4.1 model 0x4F [ 8.727480] intel_idle: intel_idle yielding to none [ 8.727822] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 8.727853] ACPI: Power Button [PWRB] [ 8.727891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.727978] ACPI: Power Button [PWRF] [ 8.728193] Monitor-Mwait will be used to enter C-1 state [ 8.728217] Monitor-Mwait will be used to enter C-2 state [ 8.729668] ERST: Error Record Serialization Table (ERST) support is initialized. [ 8.729671] pstore: Registered erst as persistent store backend [ 8.730194] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 8.730854] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 8.752075] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 8.773327] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 8.775534] hpet_acpi_add: no address or irqs in _CRS [ 8.775635] Non-volatile memory driver v1.3 [ 8.775682] Linux agpgart interface v0.103 [ 8.776445] ahci 0000:00:11.4: version 3.0 [ 8.776520] xen: registering gsi 16 triggering 0 polarity 1 [ 8.776523] Already setup the GSI :16 [ 8.776684] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 8.776687] ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst [ 8.785959] scsi host0: ahci [ 8.786176] scsi host1: ahci [ 8.786352] scsi host2: ahci [ 8.786531] scsi host3: ahci [ 8.786584] ata1: SATA max UDMA/133 abar m2048@0xc7138000 port 0xc7138100 irq 106 [ 8.786586] ata2: SATA max UDMA/133 abar m2048@0xc7138000 port 0xc7138180 irq 106 [ 8.786588] ata3: SATA max UDMA/133 abar m2048@0xc7138000 port 0xc7138200 irq 106 [ 8.786590] ata4: SATA max UDMA/133 abar m2048@0xc7138000 port 0xc7138280 irq 106 [ 8.786712] xen: registering gsi 16 triggering 0 polarity 1 [ 8.786715] Already setup the GSI :16 [ 8.786920] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 8.786922] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 8.802091] scsi host4: ahci [ 8.802269] scsi host5: ahci [ 8.802453] scsi host6: ahci [ 8.802631] scsi host7: ahci [ 8.802808] scsi host8: ahci [ 8.802985] scsi host9: ahci [ 8.803041] ata5: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132100 irq 107 [ 8.803043] ata6: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132180 irq 107 [ 8.803044] ata7: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132200 irq 107 [ 8.803046] ata8: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132280 irq 107 [ 8.803047] ata9: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132300 irq 107 [ 8.803049] ata10: SATA max UDMA/133 abar m2048@0xc7132000 port 0xc7132380 irq 107 [ 8.803159] libphy: Fixed MDIO Bus: probed [ 8.803231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.803238] ehci-pci: EHCI PCI platform driver [ 8.803357] xen: registering gsi 18 triggering 0 polarity 1 [ 8.803362] Already setup the GSI :18 [ 8.803496] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 8.803565] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.803592] ehci-pci 0000:00:1a.0: debug port 2 [ 8.807554] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 8.807604] ehci-pci 0000:00:1a.0: irq 18, io mem 0xc7134000 [ 8.814394] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 8.814468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.814470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.814471] usb usb1: Product: EHCI Host Controller [ 8.814473] usb usb1: Manufacturer: Linux 5.4.38-gentoo-host ehci_hcd [ 8.814474] usb usb1: SerialNumber: 0000:00:1a.0 [ 8.814616] hub 1-0:1.0: USB hub found [ 8.814630] hub 1-0:1.0: 2 ports detected [ 8.814901] xen: registering gsi 18 triggering 0 polarity 1 [ 8.814904] Already setup the GSI :18 [ 8.814965] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 8.815023] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 8.815049] ehci-pci 0000:00:1d.0: debug port 2 [ 8.818994] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 8.818999] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7133000 [ 8.825461] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 8.825560] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.825562] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.825563] usb usb2: Product: EHCI Host Controller [ 8.825564] usb usb2: Manufacturer: Linux 5.4.38-gentoo-host ehci_hcd [ 8.825565] usb usb2: SerialNumber: 0000:00:1d.0 [ 8.825693] hub 2-0:1.0: USB hub found [ 8.825703] hub 2-0:1.0: 2 ports detected [ 8.825896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.825900] ohci-pci: OHCI PCI platform driver [ 8.825923] uhci_hcd: USB Universal Host Controller Interface driver [ 8.826072] xen: registering gsi 19 triggering 0 polarity 1 [ 8.826075] Already setup the GSI :19 [ 8.826130] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.826233] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 8.827325] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 8.827339] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 8.827630] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.827631] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.827633] usb usb3: Product: xHCI Host Controller [ 8.827634] usb usb3: Manufacturer: Linux 5.4.38-gentoo-host xhci-hcd [ 8.827635] usb usb3: SerialNumber: 0000:00:14.0 [ 8.827774] hub 3-0:1.0: USB hub found [ 8.827796] hub 3-0:1.0: 15 ports detected [ 8.828852] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.828922] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 8.828925] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 8.829000] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 8.829002] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.829003] usb usb4: Product: xHCI Host Controller [ 8.829004] usb usb4: Manufacturer: Linux 5.4.38-gentoo-host xhci-hcd [ 8.829006] usb usb4: SerialNumber: 0000:00:14.0 [ 8.829133] hub 4-0:1.0: USB hub found [ 8.829149] hub 4-0:1.0: 6 ports detected [ 8.829827] usbcore: registered new interface driver usbserial_generic [ 8.829832] usbserial: USB Serial support registered for generic [ 8.829848] i8042: PNP: No PS/2 controller found. [ 8.829917] mousedev: PS/2 mouse device common for all mice [ 8.830054] rtc_cmos 00:00: RTC can wake from S4 [ 8.830388] rtc_cmos 00:00: registered as rtc0 [ 8.830415] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 8.830455] device-mapper: uevent: version 1.0.3 [ 8.830547] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@xxxxxxxxxx [ 8.830686] intel_pstate: CPU model not supported [ 8.831432] hidraw: raw HID events driver (C) Jiri Kosina [ 8.831456] usbcore: registered new interface driver usbhid [ 8.831457] usbhid: USB HID core driver [ 8.831510] drop_monitor: Initializing network drop monitor service [ 8.831668] Initializing XFRM netlink socket [ 8.831810] NET: Registered protocol family 10 [ 8.832125] Segment Routing with IPv6 [ 8.832145] mip6: Mobile IPv6 [ 8.832146] NET: Registered protocol family 17 [ 8.832435] IPI shorthand broadcast: enabled [ 8.832440] AVX2 version of gcm_enc/dec engaged. [ 8.832440] AES CTR mode by8 optimization enabled [ 8.837640] sched_clock: Marking stable (8803204451, 34422623)->(8952440556, -114813482) [ 8.837905] registered taskstats version 1 [ 8.837913] Loading compiled-in X.509 certificates [ 8.837954] zswap: loaded using pool lzo/zbud [ 8.838184] Key type ._fscrypt registered [ 8.838185] Key type .fscrypt registered [ 8.838347] pstore: Using crash dump compression: deflate [ 8.839844] Key type big_key registered [ 8.840279] Key type encrypted registered [ 8.841024] PM: Magic number: 0:915:690 [ 8.841051] mem mem: hash matches [ 8.841216] acpi LNXCPU:31: hash matches [ 8.841334] rtc_cmos 00:00: setting system clock to 2020-08-01T16:41:13 UTC (1596300073) [ 9.086532] random: crng init done [ 9.095976] ata2: SATA link down (SStatus 0 SControl 300) [ 9.096001] ata3: SATA link down (SStatus 0 SControl 300) [ 9.096025] ata1: SATA link down (SStatus 0 SControl 300) [ 9.096051] ata4: SATA link down (SStatus 0 SControl 300) [ 9.112197] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.112220] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.112240] ata8: SATA link down (SStatus 0 SControl 300) [ 9.112266] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.112285] ata10: SATA link down (SStatus 0 SControl 300) [ 9.112304] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.112499] ata6.00: ATA-10: INTEL SSDSC2BB240G7, N2010101, max UDMA/133 [ 9.112501] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32) [ 9.112549] ata5.00: ATA-10: INTEL SSDSC2BB240G7, N2010101, max UDMA/133 [ 9.112551] ata5.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32) [ 9.112659] ata7.00: ATA-9: INTEL SSDSC2BA400G4, G2010150, max UDMA/133 [ 9.112661] ata7.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 32) [ 9.112705] ata9.00: ATA-8: Xstra SSD, N0911, max UDMA/133 [ 9.112706] ata9.00: 61865984 sectors, multi 0: LBA48 [ 9.112924] ata6.00: configured for UDMA/133 [ 9.113009] ata5.00: configured for UDMA/133 [ 9.113170] scsi 4:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0101 PQ: 0 ANSI: 5 [ 9.113185] ata7.00: configured for UDMA/133 [ 9.113408] ata9.00: configured for UDMA/133 [ 9.113421] ata5.00: Enabling discard_zeroes_data [ 9.113431] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 9.113527] sd 4:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 9.113530] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 9.113547] sd 4:0:0:0: [sda] Write Protect is off [ 9.113550] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.113577] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.113667] scsi 5:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0101 PQ: 0 ANSI: 5 [ 9.113834] ata5.00: Enabling discard_zeroes_data [ 9.113838] ata6.00: Enabling discard_zeroes_data [ 9.113839] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 9.114026] sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 9.114028] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 9.114044] sd 5:0:0:0: [sdb] Write Protect is off [ 9.114047] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.114077] scsi 6:0:0:0: Direct-Access ATA INTEL SSDSC2BA40 0150 PQ: 0 ANSI: 5 [ 9.114082] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.114308] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.114331] ata7.00: Enabling discard_zeroes_data [ 9.114407] ata6.00: Enabling discard_zeroes_data [ 9.114542] scsi 8:0:0:0: Direct-Access ATA Xstra SSD 1 PQ: 0 ANSI: 5 [ 9.114587] sd 6:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/373 GiB) [ 9.114589] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 9.114605] sd 6:0:0:0: [sdc] Write Protect is off [ 9.114608] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.114621] ata5.00: Enabling discard_zeroes_data [ 9.114639] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.114754] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 9.114783] sd 4:0:0:0: [sda] Attached SCSI disk [ 9.114934] sd 8:0:0:0: [sdd] 61865984 512-byte logical blocks: (31.7 GB/29.5 GiB) [ 9.114958] sd 8:0:0:0: [sdd] Write Protect is off [ 9.114960] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.114983] ata7.00: Enabling discard_zeroes_data [ 9.115027] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.115262] ata6.00: Enabling discard_zeroes_data [ 9.115559] sd 5:0:0:0: [sdb] Attached SCSI disk [ 9.115583] sdc: sdc1 sdc2 sdc3 sdc4 [ 9.115987] ata7.00: Enabling discard_zeroes_data [ 9.116247] sd 6:0:0:0: [sdc] Attached SCSI disk [ 9.117236] sdd: sdd1 sdd2 sdd3 [ 9.117816] sd 8:0:0:0: [sdd] Attached SCSI disk [ 9.119633] Freeing unused kernel image memory: 1692K [ 9.123447] Write protecting the kernel read-only data: 18432k [ 9.134418] Freeing unused kernel image memory: 2016K [ 9.135294] Freeing unused kernel image memory: 1048K [ 9.139430] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 9.147430] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 9.147443] usb 3-14: new high-speed USB device number 2 using xhci_hcd [ 9.262027] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 9.262043] rodata_test: all tests were successful [ 9.262046] Run /init as init process [ 9.273630] usb 3-14: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 9.273633] usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.274040] hub 3-14:1.0: USB hub found [ 9.274133] hub 3-14:1.0: 4 ports detected [ 9.276778] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 9.276780] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.276825] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 9.276826] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.277049] hub 2-1:1.0: USB hub found [ 9.277076] hub 1-1:1.0: USB hub found [ 9.277153] hub 2-1:1.0: 8 ports detected [ 9.277159] hub 1-1:1.0: 6 ports detected [ 9.301472] zlua: loading out-of-tree module taints kernel. [ 9.301475] zlua: module license 'MIT' taints kernel. [ 9.301476] Disabling lock debugging due to kernel taint [ 9.565428] usb 3-14.1: new low-speed USB device number 3 using xhci_hcd [ 9.669784] usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 9.669786] usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.675089] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0001/input/input2 [ 9.726607] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0 [ 9.727583] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0002/input/input3 [ 9.727731] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1 [ 9.729402] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e45380b760, max_idle_ns: 440795224466 ns [ 9.915036] clocksource: Switched to clocksource tsc [ 11.320508] ZFS: Loaded module v0.8.3-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5 [ 11.324747] udevd[295]: starting version 3.2.9 [ 11.327787] udevd[296]: starting eudev-3.2.9 [ 11.533230] udevd[328]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 11.535016] udevd[329]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 11.573526] udevd[343]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 11.578226] udevd[344]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 11.579950] udevd[341]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 11.582823] udevd[342]: failed to execute '/sbin/modprobe' '/sbin/modprobe zfs': No such file or directory [ 12.590139] udevd[306]: '/lib/udev/vdev_id -d zd352' [1063] terminated by signal 15 (Terminated) [ 12.592556] udevd[309]: '/lib/udev/vdev_id -d zd320' [1064] terminated by signal 15 (Terminated) [ 15.661218] udevd[1909]: starting version 3.2.9 [ 15.679031] udevd[1909]: starting eudev-3.2.9 [ 16.118257] tun: Universal TUN/TAP device driver, 1.6 [ 16.403918] IPMI message handler: version 39.2 [ 16.405098] ipmi device interface [ 16.424170] ipmi_si: IPMI System Interface driver [ 16.424194] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 16.424198] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 16.424200] ipmi_si: Adding SMBIOS-specified kcs state machine [ 16.424312] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 16.424516] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 16.424519] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 16.424521] ipmi_si: Adding ACPI-specified kcs state machine [ 16.424656] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 16.478438] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 16.489923] power_meter ACPI000D:00: Found ACPI power meter. [ 16.489960] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 16.489970] power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 16.501696] dca service started, version 1.12.1 [ 16.504653] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0835, dev_id: 0x20) [ 16.516640] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 16.517028] pps_core: LinuxPPS API ver. 1 registered [ 16.517029] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 16.517033] xen: registering gsi 31 triggering 0 polarity 1 [ 16.517095] xen: --> pirq=31 -> irq=31 (gsi=31) [ 16.518323] PTP clock support registered [ 16.530435] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 16.530437] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 16.531398] xen: registering gsi 40 triggering 0 polarity 1 [ 16.531405] Already setup the GSI :40 [ 16.536364] xen: registering gsi 39 triggering 0 polarity 1 [ 16.536410] xen: --> pirq=39 -> irq=39 (gsi=39) [ 16.547032] xen: registering gsi 31 triggering 0 polarity 1 [ 16.547036] Already setup the GSI :31 [ 16.550116] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 16.557004] xen: registering gsi 39 triggering 0 polarity 1 [ 16.557008] Already setup the GSI :39 [ 16.566531] xen: registering gsi 31 triggering 0 polarity 1 [ 16.566535] Already setup the GSI :31 [ 16.570539] ipmi_ssif: IPMI SSIF Interface driver [ 16.577964] xen: registering gsi 39 triggering 0 polarity 1 [ 16.577968] Already setup the GSI :39 [ 16.588034] xen: registering gsi 31 triggering 0 polarity 1 [ 16.588038] Already setup the GSI :31 [ 16.600584] xen: registering gsi 39 triggering 0 polarity 1 [ 16.600589] Already setup the GSI :39 [ 16.613781] xen: registering gsi 55 triggering 0 polarity 1 [ 16.613806] xen: --> pirq=55 -> irq=55 (gsi=55) [ 16.626760] xen: registering gsi 63 triggering 0 polarity 1 [ 16.626781] xen: --> pirq=63 -> irq=63 (gsi=63) [ 16.639589] xen: registering gsi 55 triggering 0 polarity 1 [ 16.639594] Already setup the GSI :55 [ 16.652438] xen: registering gsi 63 triggering 0 polarity 1 [ 16.652444] Already setup the GSI :63 [ 16.666165] xen: registering gsi 55 triggering 0 polarity 1 [ 16.666171] Already setup the GSI :55 [ 16.673046] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 16.680096] xen: registering gsi 63 triggering 0 polarity 1 [ 16.680103] Already setup the GSI :63 [ 16.694271] xen: registering gsi 55 triggering 0 polarity 1 [ 16.694278] Already setup the GSI :55 [ 16.707209] xen: registering gsi 63 triggering 0 polarity 1 [ 16.707215] Already setup the GSI :63 [ 16.743766] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) [ 16.743940] xen: registering gsi 18 triggering 0 polarity 1 [ 16.743950] Already setup the GSI :18 [ 16.744022] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 16.780836] checking generic (c6000000 1d5000) vs hw (c6000000 1000000) [ 16.780838] fb0: switching to astdrmfb from EFI VGA [ 16.781853] Console: switching to colour dummy device 80x25 [ 16.784151] xen: registering gsi 16 triggering 0 polarity 1 [ 16.784159] Already setup the GSI :16 [ 16.793668] [drm] Using P2A bridge for configuration [ 16.793673] [drm] AST 2400 detected [ 16.793727] [drm] Analog VGA only [ 16.793755] [drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000 [ 16.796720] [TTM] Zone kernel: Available graphics memory: 12263628 KiB [ 16.796722] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 16.796723] [TTM] Initializing pool allocator [ 16.796728] [TTM] Initializing DMA pool allocator [ 16.801799] ixgbe 0000:02:00.0: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 16.816687] fbcon: astdrmfb (fb0) is primary device [ 16.848597] Console: switching to colour frame buffer device 128x48 [ 16.856082] ast 0000:06:00.0: fb0: astdrmfb frame buffer device [ 16.881717] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 16.883314] [drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0 [ 16.892468] ixgbe 0000:02:00.0: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 16.898008] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 16.898010] RAPL PMU: hw unit of domain package 2^-14 Joules [ 16.898011] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 16.916480] ixgbe 0000:02:00.0: MAC: 3, PHY: 0, PBA No: 042000-000 [ 16.916484] ixgbe 0000:02:00.0: 0c:c4:7a:eb:2a:e4 [ 17.102760] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 17.102788] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 17.102813] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 17.102833] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 17.102851] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 17.102866] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 17.102881] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 17.102889] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 17.102902] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 17.102918] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 17.102925] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 17.102937] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 17.102955] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 17.102962] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 17.102975] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 17.102989] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 17.102996] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 17.103009] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 17.103024] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 17.103031] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 17.103045] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 17.103060] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 17.103067] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 17.103072] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 17.103086] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 17.103100] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 17.103113] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 17.103127] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 17.103141] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 17.103154] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 17.103169] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 17.103177] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 17.103189] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 17.103204] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 17.103212] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 17.103225] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 17.103240] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 17.103686] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#1_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) [ 17.104121] EDAC MC1: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:7f:12.0 (INTERRUPT) [ 17.104122] EDAC sbridge: Ver: 1.1.2 [ 17.117436] ixgbe 0000:02:00.0: Intel(R) 10 Gigabit Network Connection [ 17.117483] libphy: ixgbe-mdio: probed [ 17.117626] xen: registering gsi 44 triggering 0 polarity 1 [ 17.117667] xen: --> pirq=44 -> irq=44 (gsi=44) [ 17.162837] iTCO_vendor_support: vendor-support=0 [ 17.163807] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.163861] iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 17.164161] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.176835] intel_rapl_common: Found RAPL domain package [ 17.176855] intel_rapl_common: Found RAPL domain dram [ 17.176857] intel_rapl_common: DRAM domain energy unit 15300pj [ 17.381861] ixgbe 0000:02:00.1: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 17.467446] ixgbe 0000:02:00.1: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 17.491428] ixgbe 0000:02:00.1: MAC: 3, PHY: 0, PBA No: 042000-000 [ 17.491434] ixgbe 0000:02:00.1: 0c:c4:7a:eb:2a:e5 [ 17.639803] ixgbe 0000:02:00.1: Intel(R) 10 Gigabit Network Connection [ 17.639836] libphy: ixgbe-mdio: probed [ 17.639934] xen: registering gsi 42 triggering 0 polarity 1 [ 17.639961] xen: --> pirq=42 -> irq=42 (gsi=42) [ 17.903372] ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 17.988608] ixgbe 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 18.012894] ixgbe 0000:03:00.0: MAC: 3, PHY: 0, PBA No: 041000-000 [ 18.012896] ixgbe 0000:03:00.0: 0c:c4:7a:eb:2a:e6 [ 22.429002] ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection [ 22.429044] libphy: ixgbe-mdio: probed [ 22.429142] xen: registering gsi 45 triggering 0 polarity 1 [ 22.429168] xen: --> pirq=45 -> irq=45 (gsi=45) [ 22.696565] ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 4, Tx Queue count = 4 XDP Queue count = 0 [ 22.781887] ixgbe 0000:03:00.1: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 22.806245] ixgbe 0000:03:00.1: MAC: 3, PHY: 0, PBA No: 041000-000 [ 22.806249] ixgbe 0000:03:00.1: 0c:c4:7a:eb:2a:e7 [ 27.222501] ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection [ 27.222564] libphy: ixgbe-mdio: probed [ 27.226119] ixgbe 0000:02:00.1 eno2: renamed from eth1 [ 27.234560] ixgbe 0000:03:00.0 eno3: renamed from eth2 [ 27.239497] ixgbe 0000:03:00.1 eno4: renamed from eth3 [ 27.249535] ixgbe 0000:02:00.0 eno1: renamed from eth0 [ 27.611386] Adding 4194300k swap on /dev/zd0. Priority:-2 extents:1 across:4194300k SSFS [ 31.114846] pps pps0: new PPS source ptp0 [ 31.114926] ixgbe 0000:02:00.0: registered PHC device on eno1 [ 31.451576] ixgbe 0000:02:00.0 eno1: changing MTU from 1500 to 9000 [ 32.614729] pps pps1: new PPS source ptp1 [ 32.614898] ixgbe 0000:02:00.1: registered PHC device on eno2 [ 32.952640] ixgbe 0000:02:00.1 eno2: changing MTU from 1500 to 9000 [ 34.150802] pps pps2: new PPS source ptp2 [ 34.150879] ixgbe 0000:03:00.0: registered PHC device on eno3 [ 34.482812] ixgbe 0000:03:00.0 eno3: changing MTU from 1500 to 9000 [ 35.665979] pps pps3: new PPS source ptp3 [ 35.666046] ixgbe 0000:03:00.1: registered PHC device on eno4 [ 35.996768] ixgbe 0000:03:00.1 eno4: changing MTU from 1500 to 9000 [ 37.217806] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 37.239394] ixgbe 0000:02:00.1 eno2: NIC Link is Up 10 Gbps, Flow Control: None [ 37.282358] ixgbe 0000:02:00.0: removed PHC on eno1 [ 37.624060] ixgbe 0000:02:00.1: removed PHC on eno2 [ 37.942674] ixgbe 0000:03:00.0: removed PHC on eno3 [ 38.296572] ixgbe 0000:03:00.1: removed PHC on eno4 [ 38.640408] ixgbe 0000:02:00.0 eno1: changing MTU from 9000 to 1500 [ 38.662560] pps pps0: new PPS source ptp0 [ 38.662629] ixgbe 0000:02:00.0: registered PHC device on eno1 [ 38.785572] bond0: (slave eno1): Enslaving as an active interface with an up link [ 38.796297] ixgbe 0000:02:00.1 eno2: changing MTU from 9000 to 1500 [ 38.816365] pps pps1: new PPS source ptp1 [ 38.816476] ixgbe 0000:02:00.1: registered PHC device on eno2 [ 38.939525] bond0: (slave eno2): Enslaving as an active interface with an up link [ 38.950457] ixgbe 0000:03:00.0 eno3: changing MTU from 9000 to 1500 [ 38.970344] pps pps2: new PPS source ptp2 [ 38.970437] ixgbe 0000:03:00.0: registered PHC device on eno3 [ 39.093750] bond0: (slave eno3): Enslaving as an active interface with an up link [ 39.104730] ixgbe 0000:03:00.1 eno4: changing MTU from 9000 to 1500 [ 39.122812] pps pps3: new PPS source ptp3 [ 39.122885] ixgbe 0000:03:00.1: registered PHC device on eno4 [ 39.245714] bond0: (slave eno4): Enslaving as an active interface with an up link [ 39.438498] ixgbe 0000:02:00.0 eno1: changing MTU from 1500 to 9000 [ 39.899549] ixgbe 0000:02:00.1 eno2: changing MTU from 1500 to 9000 [ 40.356165] ixgbe 0000:03:00.0 eno3: changing MTU from 1500 to 9000 [ 40.812067] ixgbe 0000:03:00.1 eno4: changing MTU from 1500 to 9000 [ 41.448593] 8021q: 802.1Q VLAN Support v1.8 [ 41.448601] 8021q: adding VLAN 0 to HW filter on device eno1 [ 41.448615] 8021q: adding VLAN 0 to HW filter on device eno2 [ 41.448629] 8021q: adding VLAN 0 to HW filter on device eno3 [ 41.448643] 8021q: adding VLAN 0 to HW filter on device eno4 [ 41.448657] 8021q: adding VLAN 0 to HW filter on device bond0 [ 43.523759] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 43.584706] bradm: port 1(adm) entered blocking state [ 43.584708] bradm: port 1(adm) entered disabled state [ 43.593974] device adm entered promiscuous mode [ 43.593975] device bond0 entered promiscuous mode [ 43.593976] device eno1 entered promiscuous mode [ 43.594308] device eno2 entered promiscuous mode [ 43.594674] device eno3 entered promiscuous mode [ 43.595003] device eno4 entered promiscuous mode [ 43.619843] device bradm entered promiscuous mode [ 43.626077] bradm: port 1(adm) entered blocking state [ 43.626079] bradm: port 1(adm) entered forwarding state [ 43.755383] bradm: port 1(adm) entered disabled state [ 43.815986] bradm: port 1(adm) entered blocking state [ 43.815988] bradm: port 1(adm) entered forwarding state [ 43.956661] ixgbe 0000:02:00.1 eno2: NIC Link is Up 10 Gbps, Flow Control: None [ 44.068603] ixgbe 0000:02:00.1 eno2: NIC Link is Down [ 44.403405] ixgbe 0000:03:00.0 eno3: NIC Link is Up 10 Gbps, Flow Control: None [ 44.578194] ixgbe 0000:03:00.0 eno3: NIC Link is Down [ 44.603394] IPv6: ADDRCONF(NETDEV_CHANGE): bradm: link becomes ready [ 45.727977] brstr: port 1(str) entered blocking state [ 45.727979] brstr: port 1(str) entered disabled state [ 45.733298] device str entered promiscuous mode [ 45.755073] device brstr entered promiscuous mode [ 45.761567] brstr: port 1(str) entered blocking state [ 45.761570] brstr: port 1(str) entered forwarding state [ 45.894637] brstr: port 1(str) entered disabled state [ 45.944293] brstr: port 1(str) entered blocking state [ 45.944296] brstr: port 1(str) entered forwarding state [ 46.041392] ixgbe 0000:02:00.1 eno2: NIC Link is Up 10 Gbps, Flow Control: None [ 46.489668] ixgbe 0000:03:00.0 eno3: NIC Link is Up 10 Gbps, Flow Control: None [ 46.745422] IPv6: ADDRCONF(NETDEV_CHANGE): brstr: link becomes ready [ 47.035436] ixgbe 0000:03:00.1 eno4: NIC Link is Up 10 Gbps, Flow Control: None [ 47.153412] ixgbe 0000:03:00.1 eno4: NIC Link is Down [ 47.513526] ixgbe 0000:03:00.1 eno4: NIC Link is Up 10 Gbps, Flow Control: None [ 118.438287] brcam: port 1(cam) entered blocking state [ 118.438289] brcam: port 1(cam) entered disabled state [ 118.443624] device cam entered promiscuous mode [ 118.465502] device brcam entered promiscuous mode [ 118.472031] brcam: port 1(cam) entered blocking state [ 118.472034] brcam: port 1(cam) entered forwarding state [ 120.712952] briot: port 1(iot) entered blocking state [ 120.712954] briot: port 1(iot) entered disabled state [ 120.718263] device iot entered promiscuous mode [ 120.740130] device briot entered promiscuous mode [ 120.746605] briot: port 1(iot) entered blocking state [ 120.746607] briot: port 1(iot) entered forwarding state [ 122.950758] brlan: port 1(lan) entered blocking state [ 122.950761] brlan: port 1(lan) entered disabled state [ 122.956071] device lan entered promiscuous mode [ 122.977973] device brlan entered promiscuous mode [ 122.984507] brlan: port 1(lan) entered blocking state [ 122.984510] brlan: port 1(lan) entered forwarding state [ 125.194289] brmedia: port 1(media) entered blocking state [ 125.194291] brmedia: port 1(media) entered disabled state [ 125.199638] device media entered promiscuous mode [ 125.222337] device brmedia entered promiscuous mode [ 125.228616] brmedia: port 1(media) entered blocking state [ 125.228618] brmedia: port 1(media) entered forwarding state [ 127.505869] brnet: port 1(net) entered blocking state [ 127.505871] brnet: port 1(net) entered disabled state [ 127.511190] device net entered promiscuous mode [ 127.532895] device brnet entered promiscuous mode [ 127.539082] brnet: port 1(net) entered blocking state [ 127.539084] brnet: port 1(net) entered forwarding state [ 129.839453] brvm1: port 1(vm1) entered blocking state [ 129.839456] brvm1: port 1(vm1) entered disabled state [ 129.844790] device vm1 entered promiscuous mode [ 129.869647] device brvm1 entered promiscuous mode [ 129.875929] brvm1: port 1(vm1) entered blocking state [ 129.875932] brvm1: port 1(vm1) entered forwarding state [ 132.203560] brvm2: port 1(vm2) entered blocking state [ 132.203562] brvm2: port 1(vm2) entered disabled state [ 132.208894] device vm2 entered promiscuous mode [ 132.231728] device brvm2 entered promiscuous mode [ 132.237999] brvm2: port 1(vm2) entered blocking state [ 132.238001] brvm2: port 1(vm2) entered forwarding state [ 134.545218] brvm3: port 1(vm3) entered blocking state [ 134.545220] brvm3: port 1(vm3) entered disabled state [ 134.550558] device vm3 entered promiscuous mode [ 134.571824] device brvm3 entered promiscuous mode [ 134.577967] brvm3: port 1(vm3) entered blocking state [ 134.577969] brvm3: port 1(vm3) entered forwarding state [ 136.853399] brvm4: port 1(vm4) entered blocking state [ 136.853402] brvm4: port 1(vm4) entered disabled state [ 136.858730] device vm4 entered promiscuous mode [ 136.880021] device brvm4 entered promiscuous mode [ 136.886380] brvm4: port 1(vm4) entered blocking state [ 136.886382] brvm4: port 1(vm4) entered forwarding state [ 139.217120] brvm5: port 1(vm5) entered blocking state [ 139.217122] brvm5: port 1(vm5) entered disabled state [ 139.222459] device vm5 entered promiscuous mode [ 139.244575] device brvm5 entered promiscuous mode [ 139.251040] brvm5: port 1(vm5) entered blocking state [ 139.251042] brvm5: port 1(vm5) entered forwarding state [ 141.579087] brvm6: port 1(vm6) entered blocking state [ 141.579089] brvm6: port 1(vm6) entered disabled state [ 141.584448] device vm6 entered promiscuous mode [ 141.608762] device brvm6 entered promiscuous mode [ 141.615270] brvm6: port 1(vm6) entered blocking state [ 141.615273] brvm6: port 1(vm6) entered forwarding state [ 143.938278] brvm7: port 1(vm7) entered blocking state [ 143.938281] brvm7: port 1(vm7) entered disabled state [ 143.943630] device vm7 entered promiscuous mode [ 143.966443] device brvm7 entered promiscuous mode [ 143.972873] brvm7: port 1(vm7) entered blocking state [ 143.972875] brvm7: port 1(vm7) entered forwarding state [ 146.279859] brvm8: port 1(vm8) entered blocking state [ 146.279861] brvm8: port 1(vm8) entered disabled state [ 146.285188] device vm8 entered promiscuous mode [ 146.308189] device brvm8 entered promiscuous mode [ 146.314465] brvm8: port 1(vm8) entered blocking state [ 146.314467] brvm8: port 1(vm8) entered forwarding state [ 148.623701] brvm9: port 1(vm9) entered blocking state [ 148.623703] brvm9: port 1(vm9) entered disabled state [ 148.629037] device vm9 entered promiscuous mode [ 148.650726] device brvm9 entered promiscuous mode [ 148.657118] brvm9: port 1(vm9) entered blocking state [ 148.657120] brvm9: port 1(vm9) entered forwarding state [ 149.999967] RPC: Registered named UNIX socket transport module. [ 149.999968] RPC: Registered udp transport module. [ 149.999969] RPC: Registered tcp transport module. [ 149.999970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 156.881408] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 158.033631] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 158.033720] NFSD: Using legacy client tracking operations. [ 158.033724] NFSD: starting 90-second grace period (net f0000150) [ 158.161773] xen:xen_evtchn: Event-channel device installed [ 158.187722] pciback 0000:81:00.0: seizing device [ 158.187755] pciback 0000:82:00.0: seizing device [ 158.187923] xen: registering gsi 66 triggering 0 polarity 1 [ 158.187967] xen: --> pirq=66 -> irq=66 (gsi=66) [ 158.289712] xen: registering gsi 64 triggering 0 polarity 1 [ 158.289716] Already setup the GSI :64 [ 158.393647] xen_pciback: backend is vpci [ 158.417342] xen_acpi_processor: Uploading Xen processor PM info [ 162.336844] brgst: port 1(gst) entered blocking state [ 162.336847] brgst: port 1(gst) entered disabled state [ 162.342956] device gst entered promiscuous mode [ 162.369841] device brgst entered promiscuous mode [ 162.378262] brgst: port 1(gst) entered blocking state [ 162.378264] brgst: port 1(gst) entered forwarding state [ 172.116569] brstr: port 2(vif1.1) entered blocking state [ 172.116571] brstr: port 2(vif1.1) entered disabled state [ 172.116636] device vif1.1 entered promiscuous mode [ 172.117579] bradm: port 2(vif1.0) entered blocking state [ 172.117588] bradm: port 2(vif1.0) entered disabled state [ 172.117741] device vif1.0 entered promiscuous mode [ 172.163703] Bridge firewalling registered [ 174.390439] xen-blkback: backend/vbd/1/51713: using 1 queues, protocol 1 (x86_64-abi) [ 174.421168] xen-blkback: backend/vbd/1/51714: using 1 queues, protocol 1 (x86_64-abi) [ 174.448995] xen-blkback: backend/vbd/1/51715: using 1 queues, protocol 1 (x86_64-abi) [ 174.474225] xen-blkback: backend/vbd/1/51716: using 1 queues, protocol 1 (x86_64-abi) [ 174.501300] xen-blkback: backend/vbd/1/51717: using 1 queues, protocol 1 (x86_64-abi) [ 174.528698] xen-blkback: backend/vbd/1/51718: using 1 queues, protocol 1 (x86_64-abi) [ 175.498323] xen-blkback: backend/vbd/1/51713: prepare for reconnect [ 175.503857] xen-blkback: backend/vbd/1/51714: prepare for reconnect [ 175.509492] xen-blkback: backend/vbd/1/51715: prepare for reconnect [ 175.515170] xen-blkback: backend/vbd/1/51716: prepare for reconnect [ 175.520909] xen-blkback: backend/vbd/1/51717: prepare for reconnect [ 175.525806] xen-blkback: backend/vbd/1/51718: prepare for reconnect [ 179.526330] xen-blkback: backend/vbd/1/51713: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 179.550576] xen-blkback: backend/vbd/1/51714: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 180.584855] xen-blkback: backend/vbd/1/51715: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 180.620999] xen-blkback: backend/vbd/1/51716: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 180.649573] xen-blkback: backend/vbd/1/51717: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 180.682537] xen-blkback: backend/vbd/1/51718: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 180.725901] vif vif-1-0 vif1.0: Guest Rx ready [ 180.726140] bradm: port 2(vif1.0) entered blocking state [ 180.726144] bradm: port 2(vif1.0) entered forwarding state [ 180.738896] vif vif-1-1 vif1.1: Guest Rx ready [ 180.739026] brstr: port 2(vif1.1) entered blocking state [ 180.739027] brstr: port 2(vif1.1) entered forwarding state [ 203.355681] bradm: port 3(vif2.0) entered blocking state [ 203.355684] bradm: port 3(vif2.0) entered disabled state [ 203.355761] device vif2.0 entered promiscuous mode [ 203.374680] brstr: port 3(vif2.1) entered blocking state [ 203.374683] brstr: port 3(vif2.1) entered disabled state [ 203.374761] device vif2.1 entered promiscuous mode [ 204.041248] xen_pciback: vpci: 0000:81:00.0: assign to virtual slot 0 [ 204.043642] pciback 0000:81:00.0: registering for 2 [ 204.044156] xen_pciback: vpci: 0000:82:00.0: assign to virtual slot 1 [ 204.046332] pciback 0000:82:00.0: registering for 2 [ 213.493238] xen-blkback: backend/vbd/2/51713: using 1 queues, protocol 1 (x86_64-abi) [ 213.536039] xen-blkback: backend/vbd/2/51714: using 1 queues, protocol 1 (x86_64-abi) [ 213.571254] xen-blkback: backend/vbd/2/51715: using 1 queues, protocol 1 (x86_64-abi) [ 213.607163] xen-blkback: backend/vbd/2/51728: using 1 queues, protocol 1 (x86_64-abi) [ 213.642523] xen-blkback: backend/vbd/2/51716: using 1 queues, protocol 1 (x86_64-abi) [ 214.467907] xen-blkback: backend/vbd/2/51713: prepare for reconnect [ 214.474083] xen-blkback: backend/vbd/2/51714: prepare for reconnect [ 214.479664] xen-blkback: backend/vbd/2/51715: prepare for reconnect [ 214.485227] xen-blkback: backend/vbd/2/51728: prepare for reconnect [ 214.488678] xen-blkback: backend/vbd/2/51716: prepare for reconnect [ 234.979376] xen: registering gsi 64 triggering 0 polarity 1 [ 234.979385] Already setup the GSI :64 [ 234.979853] xen: registering gsi 64 triggering 0 polarity 1 [ 234.979858] Already setup the GSI :64 [ 234.980323] xen: registering gsi 64 triggering 0 polarity 1 [ 234.980329] Already setup the GSI :64 [ 234.980810] xen: registering gsi 64 triggering 0 polarity 1 [ 234.980816] Already setup the GSI :64 [ 234.981218] xen: registering gsi 64 triggering 0 polarity 1 [ 234.981223] Already setup the GSI :64 [ 234.981584] xen: registering gsi 64 triggering 0 polarity 1 [ 234.981590] Already setup the GSI :64 [ 234.982223] pciback 0000:81:00.0: Driver tried to write to a read-only configuration space field at offset 0xaa, size 2. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 234.984007] xen: registering gsi 66 triggering 0 polarity 1 [ 234.984016] Already setup the GSI :66 [ 234.984512] xen: registering gsi 66 triggering 0 polarity 1 [ 234.984521] Already setup the GSI :66 [ 234.984973] xen: registering gsi 66 triggering 0 polarity 1 [ 234.984980] Already setup the GSI :66 [ 234.985457] xen: registering gsi 66 triggering 0 polarity 1 [ 234.985464] Already setup the GSI :66 [ 234.985866] xen: registering gsi 66 triggering 0 polarity 1 [ 234.985872] Already setup the GSI :66 [ 234.986138] xen: registering gsi 66 triggering 0 polarity 1 [ 234.986144] Already setup the GSI :66 [ 234.986666] pciback 0000:82:00.0: Driver tried to write to a read-only configuration space field at offset 0xaa, size 2. This may be harmless, but if you have problems with your device: 1) see permissive attribute in sysfs 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 235.033537] xen-blkback: backend/vbd/2/51713: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 235.090316] xen-blkback: backend/vbd/2/51714: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 235.150796] xen-blkback: backend/vbd/2/51715: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 235.222655] xen-blkback: backend/vbd/2/51728: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 235.283456] xen-blkback: backend/vbd/2/51716: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 235.318654] vif vif-2-0 vif2.0: Guest Rx ready [ 235.318711] bradm: port 3(vif2.0) entered blocking state [ 235.318714] bradm: port 3(vif2.0) entered forwarding state [ 235.333891] vif vif-2-1 vif2.1: Guest Rx ready [ 235.334003] brstr: port 3(vif2.1) entered blocking state [ 235.334006] brstr: port 3(vif2.1) entered forwarding state [ 298.845777] bradm: port 4(vif3.0) entered blocking state [ 298.845781] bradm: port 4(vif3.0) entered disabled state [ 298.849443] device vif3.0 entered promiscuous mode [ 298.903871] brlan: port 2(vif3.1) entered blocking state [ 298.903874] brlan: port 2(vif3.1) entered disabled state [ 298.906743] device vif3.1 entered promiscuous mode [ 298.915682] brvm1: port 2(vif3.8) entered blocking state [ 298.915684] brvm1: port 2(vif3.8) entered disabled state [ 298.915772] device vif3.8 entered promiscuous mode [ 298.956074] brgst: port 2(vif3.6) entered blocking state [ 298.956077] brgst: port 2(vif3.6) entered disabled state [ 298.960627] device vif3.6 entered promiscuous mode [ 298.964171] brcam: port 2(vif3.4) entered blocking state [ 298.964174] brcam: port 2(vif3.4) entered disabled state [ 298.967245] device vif3.4 entered promiscuous mode [ 298.976717] brnet: port 2(vif3.5) entered blocking state [ 298.976719] brnet: port 2(vif3.5) entered disabled state [ 298.984136] device vif3.5 entered promiscuous mode [ 299.009522] brvm2: port 2(vif3.9) entered blocking state [ 299.009524] brvm2: port 2(vif3.9) entered disabled state [ 299.009595] device vif3.9 entered promiscuous mode [ 299.010317] brvm7: port 2(vif3.14) entered blocking state [ 299.010319] brvm7: port 2(vif3.14) entered disabled state [ 299.018458] device vif3.14 entered promiscuous mode [ 299.024970] brvm5: port 2(vif3.12) entered blocking state [ 299.024972] brvm5: port 2(vif3.12) entered disabled state [ 299.025481] device vif3.12 entered promiscuous mode [ 299.042294] brstr: port 4(vif3.2) entered blocking state [ 299.042296] brstr: port 4(vif3.2) entered disabled state [ 299.042375] device vif3.2 entered promiscuous mode [ 299.042476] brvm3: port 2(vif3.10) entered blocking state [ 299.042478] brvm3: port 2(vif3.10) entered disabled state [ 299.047014] device vif3.10 entered promiscuous mode [ 299.050296] brvm6: port 2(vif3.13) entered blocking state [ 299.050298] brvm6: port 2(vif3.13) entered disabled state [ 299.050358] device vif3.13 entered promiscuous mode [ 299.050420] brvm8: port 2(vif3.15) entered blocking state [ 299.050423] brvm8: port 2(vif3.15) entered disabled state [ 299.050474] device vif3.15 entered promiscuous mode [ 299.050534] briot: port 2(vif3.3) entered blocking state [ 299.050537] briot: port 2(vif3.3) entered disabled state [ 299.050587] device vif3.3 entered promiscuous mode [ 299.053741] brmedia: port 2(vif3.7) entered blocking state [ 299.053743] brmedia: port 2(vif3.7) entered disabled state [ 299.055391] device vif3.7 entered promiscuous mode [ 299.080990] brvm4: port 2(vif3.11) entered blocking state [ 299.080993] brvm4: port 2(vif3.11) entered disabled state [ 299.085590] device vif3.11 entered promiscuous mode [ 299.090798] brvm9: port 2(vif3.16) entered blocking state [ 299.090800] brvm9: port 2(vif3.16) entered disabled state [ 299.090866] device vif3.16 entered promiscuous mode [ 302.382671] bradm: port 5(vif4.0) entered blocking state [ 302.382673] bradm: port 5(vif4.0) entered disabled state [ 302.382774] device vif4.0 entered promiscuous mode [ 302.389457] brstr: port 5(vif4.1) entered blocking state [ 302.389459] brstr: port 5(vif4.1) entered disabled state [ 302.389524] device vif4.1 entered promiscuous mode [ 302.451385] xen-blkback: backend/vbd/3/51713: using 1 queues, protocol 1 (x86_64-abi) [ 302.506225] xen-blkback: backend/vbd/3/51714: using 1 queues, protocol 1 (x86_64-abi) [ 302.540715] xen-blkback: backend/vbd/3/51715: using 1 queues, protocol 1 (x86_64-abi) [ 303.398415] xen-blkback: backend/vbd/3/51713: prepare for reconnect [ 303.409155] xen-blkback: backend/vbd/3/51714: prepare for reconnect [ 303.420182] xen-blkback: backend/vbd/3/51715: prepare for reconnect [ 306.324236] xen-blkback: backend/vbd/3/51713: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 306.381199] xen-blkback: backend/vbd/3/51714: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 306.442902] xen-blkback: backend/vbd/3/51715: using 2 queues, protocol 1 (x86_64-abi) persistent grants [ 306.533600] vif vif-3-0 vif3.0: Guest Rx ready [ 306.533636] bradm: port 4(vif3.0) entered blocking state [ 306.533638] bradm: port 4(vif3.0) entered forwarding state [ 307.626158] vif vif-3-1 vif3.1: Guest Rx ready [ 307.626733] brlan: port 2(vif3.1) entered blocking state [ 307.626738] brlan: port 2(vif3.1) entered forwarding state [ 307.678864] vif vif-3-2 vif3.2: Guest Rx ready [ 307.679162] brstr: port 4(vif3.2) entered blocking state [ 307.679166] brstr: port 4(vif3.2) entered forwarding state [ 307.744608] vif vif-3-3 vif3.3: Guest Rx ready [ 307.745111] briot: port 2(vif3.3) entered blocking state [ 307.745116] briot: port 2(vif3.3) entered forwarding state [ 307.817182] vif vif-3-4 vif3.4: Guest Rx ready [ 307.817886] brcam: port 2(vif3.4) entered blocking state [ 307.817889] brcam: port 2(vif3.4) entered forwarding state [ 307.883029] vif vif-3-5 vif3.5: Guest Rx ready [ 307.883510] brnet: port 2(vif3.5) entered blocking state [ 307.883513] brnet: port 2(vif3.5) entered forwarding state [ 307.926284] vif vif-3-6 vif3.6: Guest Rx ready [ 307.926586] brgst: port 2(vif3.6) entered blocking state [ 307.926588] brgst: port 2(vif3.6) entered forwarding state [ 307.954009] vif vif-3-7 vif3.7: Guest Rx ready [ 307.954185] brmedia: port 2(vif3.7) entered blocking state [ 307.954187] brmedia: port 2(vif3.7) entered forwarding state [ 308.008758] vif vif-3-8 vif3.8: Guest Rx ready [ 308.008943] brvm1: port 2(vif3.8) entered blocking state [ 308.008948] brvm1: port 2(vif3.8) entered forwarding state [ 308.061918] vif vif-3-9 vif3.9: Guest Rx ready [ 308.061949] brvm2: port 2(vif3.9) entered blocking state [ 308.061951] brvm2: port 2(vif3.9) entered forwarding state [ 308.105097] vif vif-3-10 vif3.10: Guest Rx ready [ 308.105413] brvm3: port 2(vif3.10) entered blocking state [ 308.105418] brvm3: port 2(vif3.10) entered forwarding state [ 308.144660] vif vif-3-11 vif3.11: Guest Rx ready [ 308.145120] brvm4: port 2(vif3.11) entered blocking state [ 308.145125] brvm4: port 2(vif3.11) entered forwarding state [ 308.172140] vif vif-3-12 vif3.12: Guest Rx ready [ 308.172714] brvm5: port 2(vif3.12) entered blocking state [ 308.172719] brvm5: port 2(vif3.12) entered forwarding state [ 308.243267] vif vif-3-13 vif3.13: Guest Rx ready [ 308.243527] brvm6: port 2(vif3.13) entered blocking state [ 308.243531] brvm6: port 2(vif3.13) entered forwarding state [ 308.281476] vif vif-3-14 vif3.14: Guest Rx ready [ 308.281507] brvm7: port 2(vif3.14) entered blocking state [ 308.281509] brvm7: port 2(vif3.14) entered forwarding state [ 308.327781] vif vif-3-15 vif3.15: Guest Rx ready [ 308.328084] brvm8: port 2(vif3.15) entered blocking state [ 308.328096] brvm8: port 2(vif3.15) entered forwarding state [ 308.354789] vif vif-3-16 vif3.16: Guest Rx ready [ 308.354894] brvm9: port 2(vif3.16) entered blocking state [ 308.354896] brvm9: port 2(vif3.16) entered forwarding state [ 309.473773] vif vif-4-0 vif4.0: Guest Rx ready [ 309.473824] bradm: port 5(vif4.0) entered blocking state [ 309.473827] bradm: port 5(vif4.0) entered forwarding state [ 309.537881] vif vif-4-1 vif4.1: Guest Rx ready [ 309.538264] brstr: port 5(vif4.1) entered blocking state [ 309.538269] brstr: port 5(vif4.1) entered forwarding state [ 348.425905] bradm: port 6(vif5.0) entered blocking state [ 348.425908] bradm: port 6(vif5.0) entered disabled state [ 348.425988] device vif5.0 entered promiscuous mode [ 348.440053] brstr: port 6(vif5.1) entered blocking state [ 348.440056] brstr: port 6(vif5.1) entered disabled state [ 348.440141] device vif5.1 entered promiscuous mode [ 351.069239] bradm: port 7(vif6.0) entered blocking state [ 351.069242] bradm: port 7(vif6.0) entered disabled state [ 351.069308] device vif6.0 entered promiscuous mode [ 351.080414] brstr: port 7(vif6.1) entered blocking state [ 351.080418] brstr: port 7(vif6.1) entered disabled state [ 351.080561] device vif6.1 entered promiscuous mode [ 352.513541] xen-blkback: backend/vbd/6/51713: using 1 queues, protocol 1 (x86_64-abi) [ 352.604224] xen-blkback: backend/vbd/6/51714: using 1 queues, protocol 1 (x86_64-abi) [ 352.690479] xen-blkback: backend/vbd/6/51715: using 1 queues, protocol 1 (x86_64-abi) [ 353.478038] xen-blkback: backend/vbd/6/51713: prepare for reconnect [ 353.491448] xen-blkback: backend/vbd/6/51714: prepare for reconnect [ 353.501679] xen-blkback: backend/vbd/6/51715: prepare for reconnect [ 354.506922] bradm: port 8(vif7.0) entered blocking state [ 354.506925] bradm: port 8(vif7.0) entered disabled state [ 354.507030] device vif7.0 entered promiscuous mode [ 354.532646] brstr: port 8(vif7.1) entered blocking state [ 354.532650] brstr: port 8(vif7.1) entered disabled state [ 354.532749] device vif7.1 entered promiscuous mode [ 356.312626] brlan: port 3(vif8.0) entered blocking state [ 356.312631] brlan: port 3(vif8.0) entered disabled state [ 356.312786] device vif8.0 entered promiscuous mode [ 356.319002] brstr: port 9(vif8.1) entered blocking state [ 356.319006] brstr: port 9(vif8.1) entered disabled state [ 356.319118] device vif8.1 entered promiscuous mode [ 356.417742] xen-blkback: backend/vbd/6/51713: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 356.470442] xen-blkback: backend/vbd/7/51713: using 1 queues, protocol 1 (x86_64-abi) [ 356.552677] xen-blkback: backend/vbd/7/51714: using 1 queues, protocol 1 (x86_64-abi) [ 356.616836] xen-blkback: backend/vbd/7/51715: using 1 queues, protocol 1 (x86_64-abi) [ 357.441403] xen-blkback: backend/vbd/7/51713: prepare for reconnect [ 357.449876] xen-blkback: backend/vbd/7/51714: prepare for reconnect [ 357.474800] xen-blkback: backend/vbd/7/51715: prepare for reconnect [ 357.478809] xen-blkback: backend/vbd/6/51714: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 357.624227] xen-blkback: backend/vbd/6/51715: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 357.848016] vif vif-6-0 vif6.0: Guest Rx ready [ 357.848325] bradm: port 7(vif6.0) entered blocking state [ 357.848330] bradm: port 7(vif6.0) entered forwarding state [ 357.914088] vif vif-6-1 vif6.1: Guest Rx ready [ 357.914470] brstr: port 7(vif6.1) entered blocking state [ 357.914474] brstr: port 7(vif6.1) entered forwarding state [ 359.013545] vif vif-5-0 vif5.0: Guest Rx ready [ 359.013985] bradm: port 6(vif5.0) entered blocking state [ 359.013992] bradm: port 6(vif5.0) entered forwarding state [ 359.084342] vif vif-5-1 vif5.1: Guest Rx ready [ 359.084608] brstr: port 6(vif5.1) entered blocking state [ 359.084618] brstr: port 6(vif5.1) entered forwarding state [ 364.627012] xen-blkback: backend/vbd/7/51713: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 365.709438] xen-blkback: backend/vbd/7/51714: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 365.788015] xen-blkback: backend/vbd/7/51715: using 3 queues, protocol 1 (x86_64-abi) persistent grants [ 366.012882] vif vif-7-0 vif7.0: Guest Rx ready [ 366.013141] bradm: port 8(vif7.0) entered blocking state [ 366.013145] bradm: port 8(vif7.0) entered forwarding state [ 366.064707] vif vif-7-1 vif7.1: Guest Rx ready [ 366.064934] brstr: port 8(vif7.1) entered blocking state [ 366.064936] brstr: port 8(vif7.1) entered forwarding state [ 368.440712] vif vif-8-0 vif8.0: Guest Rx ready [ 368.440768] brlan: port 3(vif8.0) entered blocking state [ 368.440772] brlan: port 3(vif8.0) entered forwarding state [ 368.522302] vif vif-8-1 vif8.1: Guest Rx ready [ 368.522338] brstr: port 9(vif8.1) entered blocking state [ 368.522340] brstr: port 9(vif8.1) entered forwarding state [ 380.592780] brlan: port 4(vif9.0) entered blocking state [ 380.592783] brlan: port 4(vif9.0) entered disabled state [ 380.592864] device vif9.0 entered promiscuous mode [ 380.603073] brstr: port 10(vif9.1) entered blocking state [ 380.603075] brstr: port 10(vif9.1) entered disabled state [ 380.603120] device vif9.1 entered promiscuous mode [ 383.729515] brmedia: port 3(vif10.0) entered blocking state [ 383.729518] brmedia: port 3(vif10.0) entered disabled state [ 383.729601] device vif10.0 entered promiscuous mode [ 383.801458] brstr: port 11(vif10.1) entered blocking state [ 383.801460] brstr: port 11(vif10.1) entered disabled state [ 383.801525] device vif10.1 entered promiscuous mode [ 392.730647] vif vif-9-0 vif9.0: Guest Rx ready [ 392.730948] brlan: port 4(vif9.0) entered blocking state [ 392.730952] brlan: port 4(vif9.0) entered forwarding state [ 392.771831] vif vif-9-1 vif9.1: Guest Rx ready [ 392.771854] brstr: port 10(vif9.1) entered blocking state [ 392.771855] brstr: port 10(vif9.1) entered forwarding state [ 393.122431] vif vif-10-0 vif10.0: Guest Rx ready [ 393.122458] brmedia: port 3(vif10.0) entered blocking state [ 393.122460] brmedia: port 3(vif10.0) entered forwarding state [ 393.153771] vif vif-10-1 vif10.1: Guest Rx ready [ 393.154540] brstr: port 11(vif10.1) entered blocking state [ 393.154543] brstr: port 11(vif10.1) entered forwarding state [ 417.085052] bradm: port 9(vif11.0) entered blocking state [ 417.085055] bradm: port 9(vif11.0) entered disabled state [ 417.085134] device vif11.0 entered promiscuous mode [ 417.123310] brstr: port 12(vif11.1) entered blocking state [ 417.123314] brstr: port 12(vif11.1) entered disabled state [ 417.123453] device vif11.1 entered promiscuous mode [ 418.822315] xen-blkback: backend/vbd/11/51713: using 1 queues, protocol 1 (x86_64-abi) [ 418.951354] xen-blkback: backend/vbd/11/51714: using 1 queues, protocol 1 (x86_64-abi) [ 419.066430] xen-blkback: backend/vbd/11/51715: using 1 queues, protocol 1 (x86_64-abi) [ 420.066821] xen-blkback: backend/vbd/11/51713: prepare for reconnect [ 420.085867] xen-blkback: backend/vbd/11/51714: prepare for reconnect [ 420.101251] xen-blkback: backend/vbd/11/51715: prepare for reconnect [ 421.380435] bradm: port 10(vif12.0) entered blocking state [ 421.380437] bradm: port 10(vif12.0) entered disabled state [ 421.380508] device vif12.0 entered promiscuous mode [ 421.397243] brstr: port 13(vif12.1) entered blocking state [ 421.397246] brstr: port 13(vif12.1) entered disabled state [ 421.397332] device vif12.1 entered promiscuous mode [ 423.239679] xen-blkback: backend/vbd/12/51713: using 1 queues, protocol 1 (x86_64-abi) [ 423.336414] xen-blkback: backend/vbd/12/51714: using 1 queues, protocol 1 (x86_64-abi) [ 423.436614] xen-blkback: backend/vbd/12/51715: using 1 queues, protocol 1 (x86_64-abi) [ 424.352225] xen-blkback: backend/vbd/12/51713: prepare for reconnect [ 424.367947] xen-blkback: backend/vbd/12/51714: prepare for reconnect [ 424.378386] xen-blkback: backend/vbd/12/51715: prepare for reconnect [ 427.485935] xen-blkback: backend/vbd/11/51713: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 428.594274] xen-blkback: backend/vbd/11/51714: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 428.716063] xen-blkback: backend/vbd/11/51715: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 428.953505] vif vif-11-0 vif11.0: Guest Rx ready [ 428.953609] bradm: port 9(vif11.0) entered blocking state [ 428.953613] bradm: port 9(vif11.0) entered forwarding state [ 429.022883] vif vif-11-1 vif11.1: Guest Rx ready [ 429.022961] brstr: port 12(vif11.1) entered blocking state [ 429.022965] brstr: port 12(vif11.1) entered forwarding state [ 433.646919] xen-blkback: backend/vbd/12/51713: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 433.796446] xen-blkback: backend/vbd/12/51714: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 433.984564] xen-blkback: backend/vbd/12/51715: using 4 queues, protocol 1 (x86_64-abi) persistent grants [ 434.248756] vif vif-12-0 vif12.0: Guest Rx ready [ 434.248882] bradm: port 10(vif12.0) entered blocking state [ 434.248885] bradm: port 10(vif12.0) entered forwarding state [ 434.356811] vif vif-12-1 vif12.1: Guest Rx ready [ 434.356891] brstr: port 13(vif12.1) entered blocking state [ 434.356896] brstr: port 13(vif12.1) entered forwarding state [ 576.888006] Loading iSCSI transport class v2.0-870. [ 577.064215] iscsi: registered transport (tcp) [ 577.066543] scsi host10: iSCSI Initiator over TCP/IP [ 589.822706] brvm1: port 3(vif13.0) entered blocking state [ 589.822713] brvm1: port 3(vif13.0) entered disabled state [ 589.822882] device vif13.0 entered promiscuous mode [ 589.839830] brstr: port 14(vif13.1) entered blocking state [ 589.839834] brstr: port 14(vif13.1) entered disabled state [ 589.839954] device vif13.1 entered promiscuous mode [ 591.966229] brvm1: port 4(vif14.0) entered blocking state [ 591.966232] brvm1: port 4(vif14.0) entered disabled state [ 591.966306] device vif14.0 entered promiscuous mode [ 591.970311] brstr: port 15(vif14.1) entered blocking state [ 591.970314] brstr: port 15(vif14.1) entered disabled state [ 591.970378] device vif14.1 entered promiscuous mode [ 594.068729] brvm1: port 5(vif15.0) entered blocking state [ 594.068733] brvm1: port 5(vif15.0) entered disabled state [ 594.068800] device vif15.0 entered promiscuous mode [ 594.096215] brstr: port 16(vif15.1) entered blocking state [ 594.096219] brstr: port 16(vif15.1) entered disabled state [ 594.096329] device vif15.1 entered promiscuous mode [ 597.101629] vif vif-13-0 vif13.0: Guest Rx ready [ 597.101982] brvm1: port 3(vif13.0) entered blocking state [ 597.101988] brvm1: port 3(vif13.0) entered forwarding state [ 597.154156] vif vif-13-1 vif13.1: Guest Rx ready [ 597.154474] brstr: port 14(vif13.1) entered blocking state [ 597.154477] brstr: port 14(vif13.1) entered forwarding state [ 597.913182] vif vif-14-0 vif14.0: Guest Rx ready [ 597.913842] brvm1: port 4(vif14.0) entered blocking state [ 597.913847] brvm1: port 4(vif14.0) entered forwarding state [ 597.979538] vif vif-14-1 vif14.1: Guest Rx ready [ 597.979706] brstr: port 15(vif14.1) entered blocking state [ 597.979709] brstr: port 15(vif14.1) entered forwarding state [ 603.875690] vif vif-15-0 vif15.0: Guest Rx ready [ 603.876068] brvm1: port 5(vif15.0) entered blocking state [ 603.876071] brvm1: port 5(vif15.0) entered forwarding state [ 603.972777] vif vif-15-1 vif15.1: Guest Rx ready [ 603.972934] brstr: port 16(vif15.1) entered blocking state [ 603.972936] brstr: port 16(vif15.1) entered forwarding state