Re: [Embedded-pv-devel] [Xen-devel] [PATCH RFC 13/18] xen: introduce and use 'dom0_rambase_pfn' setting for kernel Dom0

[Julien Grall <julien.grall@xxxxxxx>]

Hello Oleksandr,

On 20/05/16 15:19, Oleksandr Dmytryshyn wrote:
> On Fri, May 20, 2016 at 12:59 PM, Jan Beulich <JBeulich@xxxxxxxx> wrote:
> > > > > On 20.05.16 at 10:45, <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx> wrote:
> > > On Thu, May 19, 2016 at 5:36 PM, Jan Beulich <JBeulich@xxxxxxxx> wrote:
> > > > > > > On 19.05.16 at 15:58, <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx> wrote:
> > > > > Case 1: Dom0 is driver domain:
> > > > > There is a Ducati firmware which runs on dedicated M4 core and decodes
> > > > > video. This firmware uses hardcoded physical addresses for graphics
> > > > > buffers. Those addresses should be inside address-space of the driver
> > > > > domain (Dom0). Ducati firmware is proprietary and we have no ability
> > > > > to rework it. So Dom0 kernel should be placed to the configured
> > > > > address (to the DOM0 RAM bank with specific address).
> > > > >
> > > > > Case 2: Dom0 is Thin and DomD is driver domain.
> > > > > All is the same: Ducati firmware requires special (hardcoded) addresses.
> > > > For both of these cases I would then wonder whether such
> > > > environments are actually suitable for doing virtualization on.
> > > Currently we use Jacinto 6 evaluation board with DRA74X processor.
> > > We have both configurations (Thin Dom0 and Thich Dom0).
> > Which says nothing about their suitability for virtualization.
> Our solution is based on Jacinto 6 evaluation board with DRA74X
> processor. We need video-playback. Ducati firmware decodes video and
> it works only with hardcoded addresses so we need this patch.
This patch is a way to solve the problem and may not be the only one.
I would like to explore all the possibilities before taking an approach 
that requires to modify the memory allocator in Xen.
In my previous mails, I suggested a different solution (see [1] and 
[2]). If you think it is not suitable, please share more details or 
explain why you think your patch is the only way to solve it.
Regards,

[1] 
http://lists.xenproject.org/archives/html/xen-devel/2016-05/msg01879.html
[2] 
http://lists.xenproject.org/archives/html/xen-devel/2016-05/msg01894.html
--
Julien Grall

_______________________________________________
Embedded-pv-devel mailing list
Embedded-pv-devel@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/embedded-pv-devel