[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [MirageOS-devel] Mirage unikernels and network setup

> ok, do you have an IP address configured on br0 on your dom0? I can't
> see an entry for

Hmm, yes, I think. If I do "ip a" on the host I have:

3: br0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
    inet brd scope global br0
       valid_lft forever preferred_lft forever
    inet6 fe80::6498:25ff:fef1:2724/64 scope link
       valid_lft forever preferred_lft forever

and from the linux domU I can ping / connect to

And here's attached the tcpdump log with your command. Following
Vittorio's advice, I manually set a mac address for the unikernel
(00:16:3e:01:23:45), but that doesn't seem effectual for now.

(00:16:3e:ad:b8:67/ is my linux domU)

Attachment: tcpdump2.log
Description: Text Data

MirageOS-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.