Re: [MirageOS-devel] Setting the gateway when configuring a Unikernel

[Adam Steen <adam@xxxxxxxxxxxxxxxx>]

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Tuesday, March 26, 2019 8:07 AM, Mindy Preston <mindy@xxxxxxxxxxxxxxxxxxx> 
wrote:

> Hi Adam,
>
> On 3/25/19 6:59 PM, Adam Steen wrote:
>
> > Hi All
> > I am attempt to add a unikernel to my 192.168.0.*/24 network, but when I 
> > configure it with
> > mirage configure -t hvt --dhcp=false --ipv4=192.168.0.3/24
>
> mirage configure -t hvt --dhcp=false --ipv4=192.168.0.3/24
> --ipv4-gateway=192.168.0.254
>
> > the unikernel tries to send the response via 10.0.0.1, how do i configure 
> > the gateway?
> > For bonus points; i would like to use --dhcp=true in the future, but would 
> > i then use a tun device and not a tap device and add the tun device to a 
> > virtual switch which has a dhcp server attached?
>
> Sorry, I have to confess to a total lack of memory on how to do this; I
> test all the DHCP stuff via Xen.  Probably someone else has set this up
> recently, though?
>
> -Mindy
>
> MirageOS-devel mailing list
> MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
> https://lists.xenproject.org/mailman/listinfo/mirageos-devel

Hi Mindy

Thank you for the fast response, that will get me going!

Is there a central spot for mirage configure documentation?

Cheers
Adam


_______________________________________________
MirageOS-devel mailing list
MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/mirageos-devel