|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen master] xsplice: Add support for alternatives
commit f8a10174e8b17a1b35db1d6adea51f43833bd7d4
Author: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
AuthorDate: Sat Apr 9 10:07:21 2016 -0400
Commit: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
CommitDate: Fri Apr 29 03:58:59 2016 -0400
xsplice: Add support for alternatives
Add support for applying alternative sections within xsplice payload.
At payload load time, apply an alternative sections that are found.
Also we add an test-case exercising a rather useless alternative
(patching a NOP with a NOP) - but it does exercise the code-path.
Signed-off-by: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
Release-acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
---
xen/arch/x86/Makefile | 6 +++--
xen/arch/x86/alternative.c | 46 ++++++++++++++++++++------------
xen/arch/x86/test/xen_hello_world_func.c | 4 +++
xen/common/xsplice.c | 31 +++++++++++++++++++++
xen/include/asm-x86/alternative.h | 4 +++
5 files changed, 72 insertions(+), 19 deletions(-)
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 900fa59..bd7ba9f 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -6,7 +6,9 @@ subdir-y += mm
subdir-$(CONFIG_XENOPROF) += oprofile
subdir-y += x86_64
-obj-bin-y += alternative.init.o
+alternative-y := alternative.init.o
+alternative-$(CONFIG_XSPLICE) :=
+obj-bin-y += $(alternative-y)
obj-y += apic.o
obj-y += bitops.o
obj-bin-y += bzimage.init.o
@@ -61,7 +63,7 @@ obj-y += x86_emulate.o
obj-y += tboot.o
obj-y += hpet.o
obj-y += vm_event.o
-obj-$(CONFIG_XSPLICE) += xsplice.o
+obj-$(CONFIG_XSPLICE) += alternative.o xsplice.o
obj-y += xstate.o
obj-$(crash_debug) += gdbstub.o
diff --git a/xen/arch/x86/alternative.c b/xen/arch/x86/alternative.c
index f735ff8..c188a15 100644
--- a/xen/arch/x86/alternative.c
+++ b/xen/arch/x86/alternative.c
@@ -22,13 +22,14 @@
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/nmi.h>
+#include <xen/xsplice.h>
#define MAX_PATCH_LEN (255-1)
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
#ifdef K8_NOP1
-static const unsigned char k8nops[] __initconst = {
+static const unsigned char k8nops[] init_or_xsplice_const = {
K8_NOP1,
K8_NOP2,
K8_NOP3,
@@ -38,7 +39,7 @@ static const unsigned char k8nops[] __initconst = {
K8_NOP7,
K8_NOP8
};
-static const unsigned char * const k8_nops[ASM_NOP_MAX+1] __initconstrel = {
+static const unsigned char * const k8_nops[ASM_NOP_MAX+1]
init_or_xsplice_constrel = {
NULL,
k8nops,
k8nops + 1,
@@ -52,7 +53,7 @@ static const unsigned char * const k8_nops[ASM_NOP_MAX+1]
__initconstrel = {
#endif
#ifdef P6_NOP1
-static const unsigned char p6nops[] __initconst = {
+static const unsigned char p6nops[] init_or_xsplice_const = {
P6_NOP1,
P6_NOP2,
P6_NOP3,
@@ -62,7 +63,7 @@ static const unsigned char p6nops[] __initconst = {
P6_NOP7,
P6_NOP8
};
-static const unsigned char * const p6_nops[ASM_NOP_MAX+1] __initconstrel = {
+static const unsigned char * const p6_nops[ASM_NOP_MAX+1]
init_or_xsplice_constrel = {
NULL,
p6nops,
p6nops + 1,
@@ -75,7 +76,7 @@ static const unsigned char * const p6_nops[ASM_NOP_MAX+1]
__initconstrel = {
};
#endif
-static const unsigned char * const *ideal_nops __initdata = k8_nops;
+static const unsigned char * const *ideal_nops init_or_xsplice_data = k8_nops;
static int __init mask_nmi_callback(const struct cpu_user_regs *regs, int cpu)
{
@@ -100,7 +101,7 @@ static void __init arch_init_ideal_nops(void)
}
/* Use this to add nops to a buffer, then text_poke the whole buffer. */
-static void __init add_nops(void *insns, unsigned int len)
+static void init_or_xsplice add_nops(void *insns, unsigned int len)
{
while ( len > 0 )
{
@@ -114,7 +115,7 @@ static void __init add_nops(void *insns, unsigned int len)
}
/*
- * text_poke_early - Update instructions on a live kernel at boot time
+ * text_poke - Update instructions on a live kernel or non-executed code.
* @addr: address to modify
* @opcode: source of the copy
* @len: length to copy
@@ -125,9 +126,10 @@ static void __init add_nops(void *insns, unsigned int len)
* instructions. And on the local CPU you need to be protected again NMI or MCE
* handlers seeing an inconsistent instruction while you patch.
*
- * This routine is called with local interrupt disabled.
+ * You should run this with interrupts disabled or on code that is not
+ * executing.
*/
-static void *__init text_poke_early(void *addr, const void *opcode, size_t len)
+static void *init_or_xsplice text_poke(void *addr, const void *opcode, size_t
len)
{
memcpy(addr, opcode, len);
sync_core();
@@ -142,20 +144,14 @@ static void *__init text_poke_early(void *addr, const
void *opcode, size_t len)
* APs have less capabilities than the boot processor are not handled.
* Tough. Make sure you disable such features by hand.
*/
-static void __init apply_alternatives(struct alt_instr *start, struct
alt_instr *end)
+void init_or_xsplice apply_alternatives_nocheck(struct alt_instr *start,
struct alt_instr *end)
{
struct alt_instr *a;
u8 *instr, *replacement;
u8 insnbuf[MAX_PATCH_LEN];
- unsigned long cr0 = read_cr0();
-
- ASSERT(!local_irq_is_enabled());
printk(KERN_INFO "alt table %p -> %p\n", start, end);
- /* Disable WP to allow application of alternatives to read-only pages. */
- write_cr0(cr0 & ~X86_CR0_WP);
-
/*
* The scan order should be from start to end. A later scanned
* alternative code can overwrite a previous scanned alternative code.
@@ -183,8 +179,24 @@ static void __init apply_alternatives(struct alt_instr
*start, struct alt_instr
add_nops(insnbuf + a->replacementlen,
a->instrlen - a->replacementlen);
- text_poke_early(instr, insnbuf, a->instrlen);
+ text_poke(instr, insnbuf, a->instrlen);
}
+}
+
+/*
+ * This routine is called with local interrupt disabled and used during
+ * bootup.
+ */
+void __init apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+{
+ unsigned long cr0 = read_cr0();
+
+ ASSERT(!local_irq_is_enabled());
+
+ /* Disable WP to allow application of alternatives to read-only pages. */
+ write_cr0(cr0 & ~X86_CR0_WP);
+
+ apply_alternatives_nocheck(start, end);
/* Reinstate WP. */
write_cr0(cr0);
diff --git a/xen/arch/x86/test/xen_hello_world_func.c
b/xen/arch/x86/test/xen_hello_world_func.c
index 2e4af9c..03d6b84 100644
--- a/xen/arch/x86/test/xen_hello_world_func.c
+++ b/xen/arch/x86/test/xen_hello_world_func.c
@@ -5,6 +5,8 @@
#include <xen/types.h>
+#include <asm/alternative.h>
+#include <asm/nops.h>
#include <asm/uaccess.h>
static unsigned long *non_canonical_addr = (unsigned long
*)0xdead000000000000ULL;
@@ -14,6 +16,8 @@ const char *xen_hello_world(void)
{
unsigned long tmp;
int rc;
+
+ alternative(ASM_NOP8, ASM_NOP1, X86_FEATURE_LM);
/*
* Any BUG, or WARN_ON will contain symbol and payload name. Furthermore
* exceptions will be caught and processed properly.
diff --git a/xen/common/xsplice.c b/xen/common/xsplice.c
index f550565..b5df367 100644
--- a/xen/common/xsplice.c
+++ b/xen/common/xsplice.c
@@ -532,6 +532,37 @@ static int prepare_payload(struct payload *payload,
}
#ifndef CONFIG_ARM
+ sec = xsplice_elf_sec_by_name(elf, ".altinstructions");
+ if ( sec )
+ {
+ struct alt_instr *a, *start, *end;
+
+ if ( sec->sec->sh_size % sizeof(*a) )
+ {
+ dprintk(XENLOG_ERR, XSPLICE "%s: Size of .alt_instr is not
multiple of %zu!\n",
+ elf->name, sizeof(*a));
+ return -EINVAL;
+ }
+
+ start = sec->load_addr;
+ end = sec->load_addr + sec->sec->sh_size;
+
+ for ( a = start; a < end; a++ )
+ {
+ const void *instr = &a->instr_offset + a->instr_offset;
+ const void *replacement = &a->repl_offset + a->repl_offset;
+
+ if ( (instr < region->start && instr >= region->end) ||
+ (replacement < region->start && replacement >= region->end) )
+ {
+ dprintk(XENLOG_ERR, XSPLICE "%s Alt patching outside payload:
%p!\n",
+ elf->name, instr);
+ return -EINVAL;
+ }
+ }
+ apply_alternatives_nocheck(start, end);
+ }
+
sec = xsplice_elf_sec_by_name(elf, ".ex_table");
if ( sec )
{
diff --git a/xen/include/asm-x86/alternative.h
b/xen/include/asm-x86/alternative.h
index 1056630..bce959f 100644
--- a/xen/include/asm-x86/alternative.h
+++ b/xen/include/asm-x86/alternative.h
@@ -23,6 +23,10 @@ struct alt_instr {
u8 replacementlen; /* length of new instruction, <= instrlen */
};
+/* Similar to apply_alternatives except it can be run with IRQs enabled. */
+extern void apply_alternatives_nocheck(struct alt_instr *start,
+ struct alt_instr *end);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
extern void alternative_instructions(void);
#define OLDINSTR(oldinstr) "661:\n\t" oldinstr "\n662:\n"
--
generated by git-patchbot for /home/xen/git/xen.git#master
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |