Xen project Mailing List

[Xen-changelog] [qemu-xen staging-4.10] dump: Fix build with newer gcc, patchbot
[Xen-changelog] [qemu-xen staging-4.10] Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option, patchbot
[Xen-changelog] [qemu-xen staging-4.10] memfd: fix configure test, patchbot
[Xen-changelog] [xen staging] gnttab: silence table expansion message, patchbot
[Xen-changelog] [xen staging] x86/XPTI: use %r12 to write zero into xen_cr3, patchbot
[Xen-changelog] [xen staging] libxc: remove xch parameter from xc_cpuid_policy, patchbot
[Xen-changelog] [xen staging] libxc: do not return a value from xc_cpuid_policy, patchbot
[Xen-changelog] [xen staging] libxc: fix stale PVH comment, patchbot
[Xen-changelog] [xen staging] x86/vmx: Drop VMX signal for full real-mode, patchbot
[Xen-changelog] [xen staging] x86/vmx: Defer vmx_vmcs_exit() as long as possible in construct_vmcs(), patchbot
[Xen-changelog] [xen staging] x86/vmx: Simplify PAT handling during vcpu construction, patchbot
[Xen-changelog] [xen staging] x86/pat: Simplify host PAT handling, patchbot
[Xen-changelog] [xen staging-4.6] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.6] x86/EFI: further correct FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.6] x86/EFI: fix FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.6] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.6] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging-4.6] x86: correct default_xen_spec_ctrl calculation, patchbot
[Xen-changelog] [xen staging-4.7] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.7] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging-4.7] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging-4.7] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.7] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging-4.7] x86/EFI: further correct FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.7] x86/EFI: fix FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.7] x86: correct default_xen_spec_ctrl calculation, patchbot
[Xen-changelog] [xen staging-4.7] libxc/x86/PV: don't hand through CPUID leaf 0x80000008 as is, patchbot
[Xen-changelog] [xen staging-4.8] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.8] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging-4.8] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging-4.8] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.8] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging-4.8] x86/EFI: further correct FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.8] x86/EFI: fix FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging-4.8] x86: correct default_xen_spec_ctrl calculation, patchbot
[Xen-changelog] [xen staging-4.8] libxc/x86/PV: don't hand through CPUID leaf 0x80000008 as is, patchbot
[Xen-changelog] [xen staging-4.9] x86: guard against #NM, patchbot
[Xen-changelog] [xen staging-4.9] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.9] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging-4.9] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging-4.9] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.9] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging-4.10] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.10] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.10] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging-4.10] x86: guard against #NM, patchbot
[Xen-changelog] [xen staging-4.10] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging-4.10] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging-4.11] x86: guard against #NM, patchbot
[Xen-changelog] [xen staging-4.11] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging-4.11] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging-4.11] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging-4.11] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging-4.11] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging] pci: treat class 0 devices as endpoints, patchbot
[Xen-changelog] [xen staging] x86/shutdown: use ACPI reboot method for Dell PowerEdge R540, patchbot
[Xen-changelog] [xen staging] x86/setup: properly update PTEs if src/dst overlaps when relocating Xen image, patchbot
[Xen-changelog] [xen staging] unmodified_drivers: unplug the emulated devices at resume time, patchbot
[Xen-changelog] [xen staging] build: remove stray .*.d2 files during clean/distclean, patchbot
[Xen-changelog] [xen staging] x86/cpuid: fix generation of auto cpuid header, patchbot
[Xen-changelog] [xen staging] x86/idle: don't mix up ACPI and APIC IDs, patchbot
[Xen-changelog] [xen staging] x86: guard against #NM, patchbot
[Xen-changelog] [xen staging] x86/HVM: don't cause #NM to be raised in Xen, patchbot
[Xen-changelog] [xen staging] libxl: restore passing "readonly=" to qemu for SCSI disks, patchbot
[Xen-changelog] [xen staging] libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config, patchbot
[Xen-changelog] [xen staging] x86: Refine checks in #DB handler for faulting conditions, patchbot
[Xen-changelog] [xen staging] x86/mm: don't bypass preemption checks, patchbot
[Xen-changelog] [xen staging] x86/cpuid: Fix up stale comments, patchbot
[Xen-changelog] [xen staging-4.11] x86/EFI: further correct FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging] x86/EFI: further correct FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen staging] libxl: fix return code in qmp_synchronous_send, patchbot
[Xen-changelog] [xen staging] stubdom/vtpm: fix memcmp in TPM_ChangeAuthAsymFinish, patchbot
[Xen-changelog] [xen staging-4.11] x86/HVM: attempts to emulate FPU insns need to set fpu_initialised, patchbot
[Xen-changelog] [xen staging] x86/dom0: add extra RAM regions as UNUSABLE for PVH memory map, patchbot
[Xen-changelog] [xen staging] x86/HVM: alter completion-needed checking, patchbot
[Xen-changelog] [xen staging] x86/HVM: attempts to emulate FPU insns need to set fpu_initialised, patchbot
[Xen-changelog] [xen staging-4.11] MAINTAINERS: Update info for stable branch, patchbot
[Xen-changelog] [xen staging-4.11] Branching for 4.11 stable branch, turn off debug, patchbot
[Xen-changelog] [xen staging] configure: Rerun autogen.sh (on stretch), patchbot
[Xen-changelog] [xen staging] README, Makefiles, Config.mk: Update for branching 4.11 vs 4.12-unstable, patchbot
[Xen-changelog] [xen master] x86/EFI: fix FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen master] tools/libxc: retry hypercall in case of EFAULT, patchbot
[Xen-changelog] [xen master] tools/libxencalls: add new function to query hypercall buffer safety, patchbot
[Xen-changelog] [xen master] tools/libxencall: use hypercall buffer device if available, patchbot
[Xen-changelog] [xen master] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen master] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen master] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen master] scripts/add_maintainers.pl: Don't call get_maintainers.pl with -f, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen stable-4.6] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging] x86/EFI: fix FPU state handling around runtime calls, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen stable-4.8] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen stable-4.10] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen stable-4.10] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen stable-4.10] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen stable-4.9] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen stable-4.9] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging] tools/libxc: retry hypercall in case of EFAULT, patchbot
[Xen-changelog] [xen staging] tools/libxencalls: add new function to query hypercall buffer safety, patchbot
[Xen-changelog] [xen staging] tools/libxencall: use hypercall buffer device if available, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen stable-4.7] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging-4.9] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen staging-4.10] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen staging] x86/HVM: account for fully eager FPU mode in emulation, patchbot
[Xen-changelog] [xen stable-4.8] x86: don't enable XPTI on idle domain, patchbot
[Xen-changelog] [xen stable-4.8] x86: re-enable XPTI/PCID as needed in switch_native(), patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: use PCID feature, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: add some cr3 helpers, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: convert pv_guest_cr4_to_real_cr4() to a function, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: use flag byte for decision whether xen_cr3 is valid, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: disable global pages for domains with XPTI active, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: use invpcid for flushing the TLB, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: support per-domain flag for xpti, patchbot
[Xen-changelog] [xen stable-4.8] xen/x86: add a function for modifying cr3, patchbot
[Xen-changelog] [xen stable-4.8] x86/xpti: avoid copying L4 page table contents when possible, patchbot
[Xen-changelog] [xen stable-4.8] x86: invpcid support, patchbot
[Xen-changelog] [xen stable-4.8] x86: move invocations of hvm_flush_guest_tlbs(), patchbot
[Xen-changelog] [xen stable-4.8] x86/XPTI: fix S3 resume (and CPU offlining in general), patchbot
[Xen-changelog] [xen stable-4.8] x86/msr: Virtualise MSR_SPEC_CTRL.SSBD for guests to use, patchbot
[Xen-changelog] [xen stable-4.8] x86/Intel: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.8] x86/AMD: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Introduce a new `spec-ctrl=` command line argument to replace `bti=`, patchbot
[Xen-changelog] [xen stable-4.8] x86/cpuid: Improvements to guest policies for speculative sidechannel features, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Explicitly set Xen's default MSR_SPEC_CTRL value, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Split X86_FEATURE_SC_MSR into PV and HVM variants, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Elide MSR_SPEC_CTRL handling in idle context when possible, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Rename bits of infrastructure to avoid NATIVE and VMEXIT, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Fold the XEN_IBRS_{SET, CLEAR} ALTERNATIVES together, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Merge bti_ist_info and use_shadow_spec_ctrl into spec_ctrl_flags, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Express Xen's choice of MSR_SPEC_CTRL value as a variable, patchbot
[Xen-changelog] [xen stable-4.8] x86/spec_ctrl: Read MSR_ARCH_CAPABILITIES only once, patchbot
[Xen-changelog] [xen stable-4.8] x86: Fix "x86: further CPUID handling adjustments", patchbot
[Xen-changelog] [xen staging-4.6] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging-4.6] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging-4.7] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging-4.7] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging-4.8] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging-4.8] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging-4.9] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging-4.9] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging-4.10] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging-4.10] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging] x86/spec-ctrl: Mitigations for LazyFPU, patchbot
[Xen-changelog] [xen staging] x86: Support fully eager FPU context switching, patchbot
[Xen-changelog] [xen staging] scripts/add_maintainers.pl: Don't call get_maintainers.pl with -f, patchbot
[Xen-changelog] [xen stable-4.9] x86: don't enable XPTI on idle domain, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: use PCID feature, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: add some cr3 helpers, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: convert pv_guest_cr4_to_real_cr4() to a function, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: use flag byte for decision whether xen_cr3 is valid, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: disable global pages for domains with XPTI active, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: use invpcid for flushing the TLB, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: support per-domain flag for xpti, patchbot
[Xen-changelog] [xen stable-4.9] xen/x86: add a function for modifying cr3, patchbot
[Xen-changelog] [xen stable-4.9] x86/xpti: avoid copying L4 page table contents when possible, patchbot
[Xen-changelog] [xen stable-4.9] x86/msr: Virtualise MSR_SPEC_CTRL.SSBD for guests to use, patchbot
[Xen-changelog] [xen stable-4.9] x86/Intel: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.9] x86/AMD: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.9] x86: invpcid support, patchbot
[Xen-changelog] [xen stable-4.9] x86: move invocations of hvm_flush_guest_tlbs(), patchbot
[Xen-changelog] [xen stable-4.9] x86/XPTI: fix S3 resume (and CPU offlining in general), patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Introduce a new `spec-ctrl=` command line argument to replace `bti=`, patchbot
[Xen-changelog] [xen stable-4.9] x86/cpuid: Improvements to guest policies for speculative sidechannel features, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Explicitly set Xen's default MSR_SPEC_CTRL value, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Split X86_FEATURE_SC_MSR into PV and HVM variants, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Elide MSR_SPEC_CTRL handling in idle context when possible, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Rename bits of infrastructure to avoid NATIVE and VMEXIT, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Fold the XEN_IBRS_{SET, CLEAR} ALTERNATIVES together, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Merge bti_ist_info and use_shadow_spec_ctrl into spec_ctrl_flags, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Express Xen's choice of MSR_SPEC_CTRL value as a variable, patchbot
[Xen-changelog] [xen stable-4.9] x86/spec_ctrl: Read MSR_ARCH_CAPABILITIES only once, patchbot
[Xen-changelog] [xen master] xen/sndif: Change stream's unique-id to string, patchbot
[Xen-changelog] [xen master] xen/displif: Add unique display connector identifier, patchbot
[Xen-changelog] [xen master] xen/kbdif: Add unique input device identifier, patchbot
[Xen-changelog] [xen master] xen/kbdif: Move multi-touch device parameters to backend nodes, patchbot
[Xen-changelog] [xen master] x86/VT-x: Fix printing of EFER in vmcs_dump_vcpu(), patchbot
[Xen-changelog] [xen master] ocaml/xenstored: reduce use of unsafe conversions, patchbot
[Xen-changelog] [xen master] ocaml/libs/xb: Use bytes in place of strings for mutable buffers, patchbot
[Xen-changelog] [xen master] x86/traps: Fix error handling of the pv %dr7 shadow state, patchbot
[Xen-changelog] [xen stable-4.6] x86: don't enable XPTI on idle domain, patchbot
[Xen-changelog] [xen stable-4.6] x86: re-enable XPTI/PCID as needed in switch_native(), patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: use PCID feature, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: add some cr3 helpers, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: convert pv_guest_cr4_to_real_cr4() to a function, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: use flag byte for decision whether xen_cr3 is valid, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: disable global pages for domains with XPTI active, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: use invpcid for flushing the TLB, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: support per-domain flag for xpti, patchbot
[Xen-changelog] [xen stable-4.6] xen/x86: add a function for modifying cr3, patchbot
[Xen-changelog] [xen stable-4.6] x86/xpti: avoid copying L4 page table contents when possible, patchbot
[Xen-changelog] [xen stable-4.6] x86: invpcid support, patchbot
[Xen-changelog] [xen stable-4.6] x86: move invocations of hvm_flush_guest_tlbs(), patchbot
[Xen-changelog] [xen stable-4.6] x86/msr: Virtualise MSR_SPEC_CTRL.SSBD for guests to use, patchbot
[Xen-changelog] [xen stable-4.6] x86/Intel: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.6] x86/AMD: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Introduce a new `spec-ctrl=` command line argument to replace `bti=`, patchbot
[Xen-changelog] [xen stable-4.6] x86/cpuid: Improvements to guest policies for speculative sidechannel features, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Explicitly set Xen's default MSR_SPEC_CTRL value, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Split X86_FEATURE_SC_MSR into PV and HVM variants, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Elide MSR_SPEC_CTRL handling in idle context when possible, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Rename bits of infrastructure to avoid NATIVE and VMEXIT, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Fold the XEN_IBRS_{SET, CLEAR} ALTERNATIVES together, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Merge bti_ist_info and use_shadow_spec_ctrl into spec_ctrl_flags, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Express Xen's choice of MSR_SPEC_CTRL value as a variable, patchbot
[Xen-changelog] [xen stable-4.6] x86/spec_ctrl: Read MSR_ARCH_CAPABILITIES only once, patchbot
[Xen-changelog] [xen stable-4.7] x86: don't enable XPTI on idle domain, patchbot
[Xen-changelog] [xen stable-4.7] x86: re-enable XPTI/PCID as needed in switch_native(), patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: use PCID feature, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: add some cr3 helpers, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: convert pv_guest_cr4_to_real_cr4() to a function, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: use flag byte for decision whether xen_cr3 is valid, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: disable global pages for domains with XPTI active, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: use invpcid for flushing the TLB, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: support per-domain flag for xpti, patchbot
[Xen-changelog] [xen stable-4.7] xen/x86: add a function for modifying cr3, patchbot
[Xen-changelog] [xen stable-4.7] x86/xpti: avoid copying L4 page table contents when possible, patchbot
[Xen-changelog] [xen stable-4.7] x86: invpcid support, patchbot
[Xen-changelog] [xen stable-4.7] x86: move invocations of hvm_flush_guest_tlbs(), patchbot
[Xen-changelog] [xen stable-4.7] x86/XPTI: fix S3 resume (and CPU offlining in general), patchbot
[Xen-changelog] [xen stable-4.7] x86/msr: Virtualise MSR_SPEC_CTRL.SSBD for guests to use, patchbot
[Xen-changelog] [xen stable-4.7] x86/Intel: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.7] x86/AMD: Mitigations for GPZ SP4 - Speculative Store Bypass, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Introduce a new `spec-ctrl=` command line argument to replace `bti=`, patchbot
[Xen-changelog] [xen stable-4.7] x86/cpuid: Improvements to guest policies for speculative sidechannel features, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Explicitly set Xen's default MSR_SPEC_CTRL value, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Split X86_FEATURE_SC_MSR into PV and HVM variants, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Elide MSR_SPEC_CTRL handling in idle context when possible, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Rename bits of infrastructure to avoid NATIVE and VMEXIT, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Fold the XEN_IBRS_{SET, CLEAR} ALTERNATIVES together, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Merge bti_ist_info and use_shadow_spec_ctrl into spec_ctrl_flags, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Express Xen's choice of MSR_SPEC_CTRL value as a variable, patchbot
[Xen-changelog] [xen stable-4.7] x86/spec_ctrl: Read MSR_ARCH_CAPABILITIES only once, patchbot
[Xen-changelog] [xen stable-4.7] x86: Fix "x86: further CPUID handling adjustments", patchbot
[Xen-changelog] [xen staging] xen/sndif: Change stream's unique-id to string, patchbot
[Xen-changelog] [xen staging] xen/displif: Add unique display connector identifier, patchbot
[Xen-changelog] [xen staging] xen/kbdif: Add unique input device identifier, patchbot
[Xen-changelog] [xen staging] xen/kbdif: Move multi-touch device parameters to backend nodes, patchbot
[Xen-changelog] [xen staging] x86/VT-x: Fix printing of EFER in vmcs_dump_vcpu(), patchbot
[Xen-changelog] [xen staging] ocaml/xenstored: reduce use of unsafe conversions, patchbot
[Xen-changelog] [xen staging] ocaml/libs/xb: Use bytes in place of strings for mutable buffers, patchbot
[Xen-changelog] [xen staging] x86/traps: Fix error handling of the pv %dr7 shadow state, patchbot
[Xen-changelog] [xen master] x86/CPUID: don't override tool stack decision to hide STIBP, patchbot
[Xen-changelog] [xen master] x86: correct default_xen_spec_ctrl calculation, patchbot
[Xen-changelog] [xen master] x86: suppress sync when XPTI is disabled for a domain, patchbot
[Xen-changelog] [xen master] libxc/x86/PV: don't hand through CPUID leaf 0x80000008 as is, patchbot
[Xen-changelog] [xen master] tools/kdd: alternative way of muting spurious gcc warning, patchbot
[Xen-changelog] [xen master] docs/process/xen-release-management: Lesson to learn, patchbot
[Xen-changelog] [xen master] docs/process: Add RUBRIC, patchbot
[Xen-changelog] [xen master] x86/traps: Dump the instruction stream even for double faults, patchbot
[Xen-changelog] [xen master] x86/XPTI: fix S3 resume (and CPU offlining in general), patchbot

Mail converted by MHonArc

xen-changelog Mail Thread Index