|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen staging] xen/arm: Add MESON UART driver for Amlogic Meson SoCs
commit b07133e077f6d06bb457781bf7a0e39bd6aa3673
Author: Amit Singh Tomar <amittomer25@xxxxxxxxx>
AuthorDate: Thu Mar 21 15:55:34 2019 +0530
Commit: Julien Grall <julien.grall@xxxxxxx>
CommitDate: Tue Apr 9 10:31:54 2019 +0100
xen/arm: Add MESON UART driver for Amlogic Meson SoCs
This patch adds driver for UART controller present on Amlogic Meson
SoCs and it has been tested on Nanopi K2 board based on S905 SoC.
Controller registers defination is taken from Linux 4.20.
https://github.com/torvalds/linux/blob/v4.20-rc1/drivers/tty/serial/meson_uart.c
Signed-off-by: Amit Singh Tomar <amittomer25@xxxxxxxxx>
Reviewed-by: Andre Pryzwara <andre.pryzwara@xxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxx>
---
xen/drivers/char/Kconfig | 8 ++
xen/drivers/char/Makefile | 1 +
xen/drivers/char/meson-uart.c | 276 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 285 insertions(+)
diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig
index b1f07f8d0b..b572305657 100644
--- a/xen/drivers/char/Kconfig
+++ b/xen/drivers/char/Kconfig
@@ -20,6 +20,14 @@ config HAS_MVEBU
This selects the Marvell MVEBU UART. If you have a ARMADA 3700
based board, say Y.
+config HAS_MESON
+ bool "Amlogic MESON UART driver"
+ default y
+ depends on ARM_64
+ help
+ This selects the Amlogic MESON UART. If you have a Amlogic based
+ board, say Y.
+
config HAS_PL011
bool "ARM PL011 UART driver"
default y
diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile
index b68c330191..7c646d771c 100644
--- a/xen/drivers/char/Makefile
+++ b/xen/drivers/char/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_HAS_NS16550) += ns16550.o
obj-$(CONFIG_HAS_CADENCE_UART) += cadence-uart.o
obj-$(CONFIG_HAS_PL011) += pl011.o
obj-$(CONFIG_HAS_EXYNOS4210) += exynos4210-uart.o
+obj-$(CONFIG_HAS_MESON) += meson-uart.o
obj-$(CONFIG_HAS_MVEBU) += mvebu-uart.o
obj-$(CONFIG_HAS_OMAP) += omap-uart.o
obj-$(CONFIG_HAS_SCIF) += scif-uart.o
diff --git a/xen/drivers/char/meson-uart.c b/xen/drivers/char/meson-uart.c
new file mode 100644
index 0000000000..c16c18811e
--- /dev/null
+++ b/xen/drivers/char/meson-uart.c
@@ -0,0 +1,276 @@
+/*
+ * xen/drivers/char/meson-uart.c
+ *
+ * Driver for Amlogic MESON UART
+ *
+ * Copyright (c) 2019, Amit Singh Tomar <amittomer25@xxxxxxxxx>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms and conditions of the GNU General Public
+ * License, version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <xen/irq.h>
+#include <xen/serial.h>
+#include <xen/vmap.h>
+#include <asm/io.h>
+
+/* Register offsets */
+#define AML_UART_WFIFO_REG 0x00
+#define AML_UART_RFIFO_REG 0x04
+#define AML_UART_CONTROL_REG 0x08
+#define AML_UART_STATUS_REG 0x0c
+#define AML_UART_MISC_REG 0x10
+
+/* UART_CONTROL bits */
+#define AML_UART_TX_RST BIT(22)
+#define AML_UART_RX_RST BIT(23)
+#define AML_UART_CLEAR_ERR BIT(24)
+#define AML_UART_RX_INT_EN BIT(27)
+#define AML_UART_TX_INT_EN BIT(28)
+
+/* UART_STATUS bits */
+#define AML_UART_RX_FIFO_EMPTY BIT(20)
+#define AML_UART_TX_FIFO_FULL BIT(21)
+#define AML_UART_TX_FIFO_EMPTY BIT(22)
+#define AML_UART_TX_CNT_MASK GENMASK(14, 8)
+
+/* AML_UART_MISC bits */
+#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
+#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
+
+#define TX_FIFO_SIZE 64
+
+#define setbits(addr, set) writel((readl(addr) | (set)), (addr))
+#define clrbits(addr, clear) writel((readl(addr) & ~(clear)),
(addr))
+
+static struct meson_uart {
+ unsigned int irq;
+ void __iomem *regs;
+ struct irqaction irqaction;
+ struct vuart_info vuart;
+} meson_com;
+
+static void meson_uart_interrupt(int irq, void *data,
+ struct cpu_user_regs *regs)
+{
+ struct serial_port *port = data;
+ struct meson_uart *uart = port->uart;
+ uint32_t st = readl(uart->regs + AML_UART_STATUS_REG);
+
+ if ( !(st & AML_UART_RX_FIFO_EMPTY) )
+ serial_rx_interrupt(port, regs);
+
+ if ( !(st & AML_UART_TX_FIFO_FULL) )
+ serial_tx_interrupt(port, regs);
+}
+
+static void __init meson_uart_init_preirq(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ /* Reset UART */
+ setbits(uart->regs + AML_UART_CONTROL_REG,
+ (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR));
+
+ clrbits(uart->regs + AML_UART_CONTROL_REG,
+ (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR));
+
+ /* Disable Rx/Tx interrupts */
+ clrbits(uart->regs + AML_UART_CONTROL_REG,
+ (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN));
+}
+
+static void __init meson_uart_init_postirq(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ uart->irqaction.handler = meson_uart_interrupt;
+ uart->irqaction.name = "meson_uart";
+ uart->irqaction.dev_id = port;
+
+ if ( setup_irq(uart->irq, 0, &uart->irqaction) != 0 )
+ {
+ printk("Failed to allocated Meson UART IRQ %d\n", uart->irq);
+ return;
+ }
+
+ /*
+ * Configure Rx/Tx interrupts based on bytes in FIFO, these bits have
+ * taken from Linux driver
+ */
+ writel((AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(TX_FIFO_SIZE / 2)),
+ uart->regs + AML_UART_MISC_REG);
+
+ /* Make sure Rx/Tx interrupts are enabled now */
+ setbits(uart->regs + AML_UART_CONTROL_REG,
+ (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN));
+}
+
+static void meson_uart_suspend(struct serial_port *port)
+{
+ BUG();
+}
+
+static void meson_uart_resume(struct serial_port *port)
+{
+ BUG();
+}
+
+static void meson_uart_putc(struct serial_port *port, char c)
+{
+ struct meson_uart *uart = port->uart;
+
+ writel(c, uart->regs + AML_UART_WFIFO_REG);
+}
+
+static int meson_uart_getc(struct serial_port *port, char *c)
+{
+ struct meson_uart *uart = port->uart;
+
+ if ( (readl(uart->regs + AML_UART_STATUS_REG) & AML_UART_RX_FIFO_EMPTY) )
+ return 0;
+
+ *c = readl(uart->regs + AML_UART_RFIFO_REG) & 0xff;
+
+ return 1;
+}
+
+static int __init meson_irq(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ return uart->irq;
+}
+
+static const struct vuart_info *meson_vuart_info(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ return &uart->vuart;
+}
+
+static void meson_uart_stop_tx(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ clrbits(uart->regs + AML_UART_CONTROL_REG, AML_UART_TX_INT_EN);
+}
+
+static void meson_uart_start_tx(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+
+ setbits(uart->regs + AML_UART_CONTROL_REG, AML_UART_TX_INT_EN);
+}
+
+static int meson_uart_tx_ready(struct serial_port *port)
+{
+ struct meson_uart *uart = port->uart;
+ uint32_t reg;
+
+ reg = readl(uart->regs + AML_UART_STATUS_REG);
+
+ if ( reg & AML_UART_TX_FIFO_EMPTY )
+ return TX_FIFO_SIZE;
+ if ( reg & AML_UART_TX_FIFO_FULL )
+ return 0;
+
+ return (reg & AML_UART_TX_CNT_MASK) >> 8;
+}
+
+static struct uart_driver __read_mostly meson_uart_driver = {
+ .init_preirq = meson_uart_init_preirq,
+ .init_postirq = meson_uart_init_postirq,
+ .endboot = NULL,
+ .suspend = meson_uart_suspend,
+ .resume = meson_uart_resume,
+ .putc = meson_uart_putc,
+ .getc = meson_uart_getc,
+ .tx_ready = meson_uart_tx_ready,
+ .stop_tx = meson_uart_stop_tx,
+ .start_tx = meson_uart_start_tx,
+ .irq = meson_irq,
+ .vuart_info = meson_vuart_info,
+};
+
+static int __init meson_uart_init(struct dt_device_node *dev, const void *data)
+{
+ const char *config = data;
+ struct meson_uart *uart;
+ int res;
+ u64 addr, size;
+
+ if ( strcmp(config, "") )
+ printk("WARNING: UART configuration is not supported\n");
+
+ uart = &meson_com;
+
+ res = dt_device_get_address(dev, 0, &addr, &size);
+ if ( res )
+ {
+ printk("meson: Unable to retrieve the base address of the UART\n");
+ return res;
+ }
+
+ res = platform_get_irq(dev, 0);
+ if ( res < 0 )
+ {
+ printk("meson: Unable to retrieve the IRQ\n");
+ return -EINVAL;
+ }
+
+ uart->irq = res;
+
+ uart->regs = ioremap_nocache(addr, size);
+ if ( !uart->regs )
+ {
+ printk("meson: Unable to map the UART\n");
+ return -ENOMEM;
+ }
+
+ uart->vuart.base_addr = addr;
+ uart->vuart.size = size;
+ uart->vuart.data_off = AML_UART_WFIFO_REG;
+ uart->vuart.status_off = AML_UART_STATUS_REG;
+ uart->vuart.status = AML_UART_RX_FIFO_EMPTY | AML_UART_TX_FIFO_EMPTY;
+
+ /* Register with generic serial driver. */
+ serial_register_uart(SERHND_DTUART, &meson_uart_driver, uart);
+
+ dt_device_set_used_by(dev, DOMID_XEN);
+
+ return 0;
+}
+
+static const struct dt_device_match meson_dt_match[] __initconst =
+{
+ DT_MATCH_COMPATIBLE("amlogic,meson-uart"),
+ DT_MATCH_COMPATIBLE("amlogic,meson6-uart"),
+ DT_MATCH_COMPATIBLE("amlogic,meson8-uart"),
+ DT_MATCH_COMPATIBLE("amlogic,meson8b-uart"),
+ DT_MATCH_COMPATIBLE("amlogic,meson-gx-uart"),
+ { /* sentinel */ },
+};
+
+DT_DEVICE_START(meson, "Amlogic UART", DEVICE_SERIAL)
+ .dt_match = meson_dt_match,
+ .init = meson_uart_init,
+DT_DEVICE_END
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+*/
--
generated by git-patchbot for /home/xen/git/xen.git#staging
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |