[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] xen/dom0 console problems
i am using the following (with grub): kernel (nd)/usr/groups/srgboot/revs/xen.gz dom0_ip=DOM0IP dom0_mem=65536 com1=115200,8n1 console=com1 pdb=com1H module (nd)/usr/groups/srgboot/revs/xenolinux.gz ip=DOM0IP:NFSSERVERIP:GW:255.255.240.0:hostname:eth0:off root=nfs nfsroot=/roots/root0 all xen & dom0 boot output appear on com1, i can use either telnet or xencons to retrieve the output. i can also type 'D' to communicate with xen and force it into pdb. my test machine is in another room so i haven't checked to see if anything appears on the console. .a On Thu, 25 Mar 2004 15:56:50 -0500 "MAGENHEIMER,DAN (HP-FtCollins,ex1)" <dan.magenheimer@xxxxxx> wrote: > I'm trying out some of the (not-so-new) console stuff > on the unstable tree and having a heckuva time trying > to get what I want: > > 1a) All Xen boot output and all dom0 boot output on > the vga screen, or > 1a) All Xen boot output and all dom0 boot output on com1, or > 1b) All Xen boot output on vga and all dom0 boot output > on com1 > 2) The ability to use the Xen "handlers" (e.g. to press > "D" to get to the debugger) > 3) pdb communication on com1 (or com2 for case 1a or 1b) > > I was using "ser_baud=9600nr8 pdb=com1" on the Xen > command line and "console=xencons0 console=ttyS0" for > xenolinux before and all this worked (and continues to > work, except for the warning that ser_baud is deprecated); > output going both to vga and com1 and I was able to > use ctrl-A-ctrl-A-ctrl-A-D over com1 to get to the > debugger. I was going to move pdb to com2 and decided > to switch over to the newer (non-deprecated) syntax first, > but none of the obvious > command line options seems to get me where I was before! > I didn't write down all the different options I tried, > but if I was able to get Xen/dom0 boot output, I wasn't > able to get to any Xen handlers; and in many cases > I wasn't able to get dom0 boot output (or in some cases > even xen boot output) even though I was using what > I expected to be the obvious right way (e.g. console=com1 > console=vga or no com= option for Xen, console=xencons0 > console=ttyS0 (or tty0) for xenolinux). > > I haven't yet gotten to any of the new console stuff for > non-dom0 domains... all of this is just with Xen and > domain0. > > Thanks for any suggestions/help! > Dan > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/xen-devel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |