[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Xen breaking iSCSI



I am trying to run an iSCSI initiator in dom0 and use the device in
dom1. The initiator in question is the Cisco one (3.4.3). For some
reason, running the initiator within Xen causes it to repeatedly
disconnect from Target when one tries to read data from the iSCSI disk
in dom1.

I used two different targets to make sure it was an initiator side
problem. Also, running the initiator with vanilla linux or even just
dom0 causes no problem. Using a hardware initiator (Intel Pro 1000/T)
causes no problems either.

Any idea what the reason could be? This used to work earlier  and
definitely before the s/g changes were merged in. Could this be the
cause?

Niraj


-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.