Re: [Xen-devel] xend in init.d

[Nuno Dias <ndias@xxxxxx>]

On Mon, 2004-10-11 at 21:46, Tim Freeman wrote:

> >  I have put xend startup script in /etc/init.d, and when the machine
> > goes up, the xend start.
> 
> Does it run this before the networking script?  If so, it makes sense
> that guest domains wouldn't be able to reach the gateway, xend runs the
> network script listed in /etc/xen/xend-config.sxp which assumes the
> host's networking is already up.

No, i run xend after network ... 

# cd /etc/rc3.d

# ls -la S10network S99xend
lrwxr-xr-x    1 root     root           17 Sep 14 16:38 S10network ->
../init.d/network
lrwxr-xr-x    1 root     root           14 Sep 20 15:23 S99xend ->
../init.d/xend

> >  Then i manually startup a new virtual machine with "xm create vmid=1",
> > the problem is, this machine after bootup can't reach the gateway.
> 
> What does ifconfig say here?

In the host machine in ifconfig command i have eth0, lo and vif1.0

In the "virtual machine" i have eth0 and lo

> >  Then i make a restart of xend and the "virtual machine" gets the
> > network problems resolved.
> 
> What does ifconfig say now?

In the host machine in ifconfig command i have eth0, lo, vif1.0 and one
new interface xen-br0

In the "virtual machine" i have eth0 and lo

> >  The problem with this method, is that after restart xend, i can't
> > connect to the "virtual machine" with "xm console xpto", but the virtual
> > machine is listed in "xm list".

Thank's for the assistance.

ND
-- 
Nuno Dias <ndias@xxxxxx>
LIP



-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel