Re: Fwd: [Cooker] Re: [Xen-devel] Configure Xen in Mandrake 10.2 cooker

[davide <davide.duina@xxxxxxxxx>]

On Wednesday 16 March 2005 01:55 pm, Ian Pratt wrote:
> > PDC20265: IDE controller at PCI slot 0000:00:11.0
> > PCI: Found IRQ 10 for device 0000:00:11.0
> > PDC20265: chipset revision 2
> > PDC20265: 100% native mode on irq 10
> > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary
> > PCI Mode.
> >     ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio
> >     ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio
> > Probing IDE interface ide2...
> > hde: Maxtor 6Y080L0, ATA DISK drive
> > ide2 at 0x9400-0x9407,0x9002 on irq 10
> >
> > It's a known problem? There's a patch somewhere?
>
> You'll need to enable the pdc202xx_old in your kernel config and rebuild
> the kernel.
> BLK_DEV_PDC202XX_OLD.
>
> Ian

How can I do it?

(Sorry, I've never compiled a kernel)

-- 
Cheers

Davide.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel