Re: [Xen-devel] Using Debian packages

[michal urbanski <michal@xxxxxxxxxxxx>]

xen.log:

[2005-03-17 14:14:36 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-03-17 14:14:36 xend] INFO (XendRoot:91) EVENT> xend.start 0

network start bridge=xen-br0 netdev=eth0 antispoof=no
Traceback (most recent call last):
  File "/usr/sbin/xend", line 121, in ?
    sys.exit(main())
  File "/usr/sbin/xend", line 107, in main
    return daemon.start()
  File "/usr/lib/python2.3/site-packages/xen/xend/server/SrvDaemon.py", line 
525, in start
    self.run()
  File "/usr/lib/python2.3/site-packages/xen/xend/server/SrvDaemon.py", line 
615, in run
    SrvServer.create(bridge=1)
  File "/usr/lib/python2.3/site-packages/xen/xend/server/SrvServer.py", line 
50, in create
    reactor.listenTCP(port, site, interface=interface)
  File "/usr/lib/python2.3/site-packages/twisted/internet/default.py", line 
283, in listenTCP
    p.startListening()
  File "/usr/lib/python2.3/site-packages/twisted/internet/tcp.py", line 594, in 
startListening
    raise CannotListenError, (self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on any:8000: (98, 
'Address already in use').

... which is from when I first started it with "(xend-port 8000)" in 
/etc/xend-config.sxp, but
which I then changed to 6000. 

ps auxf|grep xen shows:

root       725  0.0  0.0     0    0 ?        S    14:06   0:00 [xenblkd]
root      1503  0.6  5.9 10000 7476 ?        S    15:18   0:00 python 
/usr/sbin/xend start


I hope some of this is useful.

-michal urbanski


On Thu, Mar 17, 2005 at 11:11:33PM -0000, Ian Pratt wrote:
>  
> 
> Please can you see if there's a more helpful error report in
> /var/log/xend.log or /var/log/xend-debug.log
> 
> Thanks,
> Ian
> 
> > I gave up on compiling a kernel the debian way... once I applied the
> > xen patch by running /usr/src/kernel-patches/i386/apply/xen from
> > /usr/src/linux, I did the whole "make ARCH=xen" and manually 
> > copied the
> > resulting vmlinuz to /boot/vmlinuz-2.6.10-xen0.
> > 
> > Now, has anyone else had problems with these debian packages? 
> > I've built
> > a U kernel with my same config, and am using this as my vm config:
> > 
> > kernel = "/boot/vmlinuz-2.6.10-xenU"
> > memory = 256 
> > name = "test"
> > disk = ['file:/var/lib/xen/diskimages/test_disk,sda1,w']
> > disk = ['file:/var/lib/xen/diskimages/test_swap_disk,sda2,w']
> > root = "/dev/sda1 rw"
> > restart = 'never'
> > 
> > but whenever I try "xm create -f vm_test", all I get is:
> > 
> > Using config file "./vm_test".
> > Error: Not Found
> > 
> > Any possible explanations? Have I done something braindead in my vm
> > config?
> > 
> > -michal urbanski
> > 
> > 
> > On Thu, Mar 17, 2005 at 04:48:08PM +0100, Lars E. D. Jensen wrote:
> > > Onsdag den 16. marts 2005 09:17 skrev Ian Pratt:
> > > > > Does the 2.0.5 packages (kernel-patch-xen_2.0.5-1_i386.deb)
> > > > > apply to Debian
> > > > > kernels in the Sarge tree which is 2.6.8 at the moment?
> > > > >
> > > > > If so, is it possible to build a domU kernel using the debian
> > > > > packages too?
> > > >
> > > > If you've got a kernel built with all the drivers as modules, then
> > > > there's little point building a separate domU kernel -- 
> > just use the
> > > > same for privileged and unprivileged domains.
> > > 
> > > Hmmm... I really have problems using those packages.
> > > 
> > > Is there someone who is using those packages, if so... how 
> > do you use them?
> > > 
> > > What kernel-source (from where) are you patching?
> > > 
> > > Maybe a small step-by-step guide would be good.
> > > 
> > > My problem is that I can't get a kernel compiled "the 
> > debian way" ... into a 
> > > debian package.
> > > 
> > > I'm not sure if I should use vanilla or not, but I've 
> > downloaded the vanilla 
> > > 2.6.10 which kernel-patch-xen_2.0.5-1_i386.deb is for (I 
> > think). I've 
> > > installed kernel-patch-xen_2.0.5-1_i386.deb and then copied 
> > my .config into 
> > > source directory and run:
> > > make-kpkg --added-patches=xen --revision=xenserver.0.1 kernel_image
> > > 
> > > It compiles fine, but is this the right way of doing it if 
> > I want a debian 
> > > package?
> > > 
> > > "make ARCH=xen menuconfig" fails since there is no xen arch 
> > in vanilla.
> > > 
> > > Also I get this when trying to install the 2.0.5 Debian packages:
> > > Python C API version mismatch for module xen.lowlevel.xu: 
> > This Python has API 
> > > version 1012, module xen.lowlevel.xu has version 1011.
> > > 
> > > Thanks.
> > > 
> > 
> > 
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from 
> > real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.sourceforge.net/lists/listinfo/xen-devel
> > 


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel