[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] 2 nics
On Wed, 23 Mar 2005 10:59:52 +0000 (UTC), Michael Stoehrel <mstoehrel@xxxxxxxxxxx> wrote: > Hi all > > I am running xen (2.0.5) with debian sarge. > Sources compiled (2.6.10) on a via epia pd-10000 with 2 nics. > > eth0: dhcp > eth1: static > > before xend started: > -------------------- > > outgoing trafic OK (through eth0) > incoming trafic on both nics ok > > eth0 Link encap:Ethernet HWaddr 00:40:63:DB:55:18 > inet addr:192.168.253.55 Bcast:192.168.253.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:20 errors:0 dropped:0 overruns:0 frame:0 > TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:2664 (2.6 KiB) TX bytes:1562 (1.5 KiB) > Interrupt:9 Base address:0xd000 > > eth1 Link encap:Ethernet HWaddr 00:40:63:DB:55:4A > inet addr:192.168.254.5 Bcast:192.168.254.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:126 (126.0 b) > Interrupt:11 Base address:0xe400 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:1 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:104 (104.0 b) TX bytes:104 (104.0 b) > > after xend started: > ------------------- > > outgoing traffic dead > incoming traffic on eth0 dead > incoming trafic on eth1 ok > eth0 Link encap:Ethernet HWaddr 00:40:63:DB:55:18 > inet addr:192.168.253.55 Bcast:192.168.253.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:25 errors:0 dropped:0 overruns:0 frame:0 > TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:2990 (2.9 KiB) TX bytes:1562 (1.5 KiB) > Interrupt:9 Base address:0xd000 > > eth1 Link encap:Ethernet HWaddr 00:40:63:DB:55:4A > inet addr:192.168.254.5 Bcast:192.168.254.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:252 (252.0 b) > Interrupt:11 Base address:0xe400 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:2 errors:0 dropped:0 overruns:0 frame:0 > TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:208 (208.0 b) TX bytes:208 (208.0 b) > > xen-br0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 > inet addr:192.168.253.55 Bcast:192.168.253.255 > Mask:255.255.255.255 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > because bridging connects to eth0 ip traffic on a started virtual machine is > dead > > if I disable 1 nic the BIOS, all is incomming and outgoing trafic is ok > and the virtual machine too. You can force xen to set up the bridge onto eth1 instead of eth0... just edit /etc/xen/scripts/network and replace netdev=${netdev:-eth1} with netdev=${netdev:-eth0} ------------------------------------------------------- This SF.net email is sponsored by: 2005 Windows Mobile Application Contest Submit applications for Windows Mobile(tm)-based Pocket PCs or Smartphones for the chance to win $25,000 and application distribution. Enter today at http://ads.osdn.com/?ad_id=6882&alloc_id=15148&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |