RE: [Xen-devel] Xeno-unstable crashing at boot

["Ian Pratt" <m+Ian.Pratt@xxxxxxxxxxxx>]

> I'm getting the following crash every time I boot xeno-unstable.

Are you sure you're using the kernel version with the extra version
extension ?
e.g. vmlinuz-2.6.11.8-xen0 (note the .8)

Ian

>   Xen version 3.0-devel (mjw@xxxxxxxxxx) (gcc version 3.2.2 
> 20030222 (Red Hat Linux 3.2.2-5)) Fri May 13 15:30:05 BST 2005
>   Latest ChangeSet: 2005/05/13 15:37:25 1.1401 
> 4284bba5zgcyWRg6WwOIZIaOia4E2g
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 000000000009fc00 (usable)
> (XEN)  000000000009fc00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e8000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000007fff7b00 (usable)
> (XEN)  000000007fff7b00 - 0000000080000000 (reserved)
> (XEN)  00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 2047MB (2096728kB)
> (XEN) Xen heap: 10MB (10756kB)
> (XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 
> 00000000, vendor = 0
> (XEN) CPU#0: Physical ID: 0, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) found SMP MP-table at 000f9bf0
> (XEN) ACPI: RSDP (v000 COMPAQ                                
> ) @ 0x000ea810
> (XEN) ACPI: RSDT (v001 COMPAQ CPQ0054  0x20030821  
> 0x00000000) @ 0x7fff7b40
> (XEN) ACPI: FADT (v001 COMPAQ PLACER   0x00000001  
> 0x00000000) @ 0x7fff7bf8
> (XEN) ACPI: SSDT (v001 COMPAQ  PROJECT 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff894d
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff8ee7
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff9433
> (XEN) ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff95ce
> (XEN) ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff98d6
> (XEN) ACPI: SSDT (v001 COMPAQ    UART2 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff9e15
> (XEN) ACPI: SSDT (v001 COMPAQ   FLOPPY 0x00000001 MSFT 
> 0x0100000e) @ 0x7fff9f7c
> (XEN) ACPI: MADT (v001 COMPAQ PLACER   0x00000001  
> 0x00000000) @ 0x7fff7c6c
> (XEN) ACPI: SSDT (v001 COMPAQ     APIC 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffba41
> (XEN) ACPI: ASF! (v016 COMPAQ PLACER   0x00000001  
> 0x00000000) @ 0x7fff7cf0
> (XEN) ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffa538
> (XEN) ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffa95c
> (XEN) ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffaac9
> (XEN) ACPI: SSDT (v001 COMPAQ       S1 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffabe2
> (XEN) ACPI: SSDT (v001 COMPAQ      L08 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffb7e4
> (XEN) ACPI: SSDT (v001 COMPAQ    FINIS 0x00000001 MSFT 
> 0x0100000e) @ 0x7fffbbdc
> (XEN) ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 
> 0x0100000e) @ 0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> (XEN) Processor #6 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: Borrowed Virtual Time (bvt)
> (XEN) Initializing CPU#0
> (XEN) Detected 2791.093 MHz processor.
> (XEN) CPU0 booted
> (XEN) Booting processor 1/6 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU1: Before vendor init, caps: bfebfbff 00000000 
> 00000000, vendor = 0
> (XEN) CPU#1: Physical ID: 3, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) CPU1 has booted.
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) checking TSC synchronization across CPUs: passed.
> (XEN) Time init:
> (XEN) .... cpu_freq:    00000000:A65CB560
> (XEN) .... scale:       00000001:6EE19BBD
> (XEN) .... Wall Clock:  1115998803s 140000us
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found: 
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000
> ,LOADER=generic'
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   08000000->10000000
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c0100000->c05d00e0
> (XEN)  Init. ramdisk: c05d1000->c05d1000
> (XEN)  Phys-Mach map: c05d1000->c05f1000
> (XEN)  Page tables:   c05f1000->c05f4000
> (XEN)  Start info:    c05f4000->c05f5000
> (XEN)  Boot stack:    c05f5000->c05f6000
> (XEN)  TOTAL:         c0000000->c0800000
> (XEN)  ENTRY ADDRESS: c0100000
> (XEN) Scrubbing Free RAM: .....................done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to 
> switch input to Xen).
> (XEN) BUG at domain.c:125
> (XEN) CPU:    0
> (XEN) EIP:    0808:[<ff10618c>]
> (XEN) EFLAGS: 00210296   CONTEXT: hypervisor
> (XEN) eax: 00000000   ebx: ffbf6900   ecx: 000003f8   edx: 00000000
> (XEN) esi: ffbf3080   edi: c0453729   ebp: 00000002   esp: ff103f88
> (XEN) ds: 0810   es: 0810   fs: 0810   gs: 0810   ss: 0810   cs: 0808
> (XEN) Stack trace from ESP=ff103f88:
> (XEN)    ff143308 ff143347 0000007d c0102ff4 c0453729 
> ffbf3080 c0102ff4 [ff106198]
> (XEN)    [ff106190] 00000808 00210292 [ff135165] 00002834 
> fbff1000 00000432 00000024
> (XEN)    c0453729 00000002 00000000 000e0000 00000000 
> 00000819 00210217 c0103000
> (XEN)    00000821 00000821 00000821 00000000 00000000 ffbf3080
> (XEN) Call Trace from ESP=ff103f88:
> (XEN)    [<ff106198>] [<ff106190>] [<ff135165>]
> 
> ****************************************
> CPU0 FATAL TRAP: vector = 6 (invalid operand) 
> [error_code=0000] Aieee! CPU0 is toast...
> ****************************************
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel