Re: [Xen-devel] x86_64 Dom0 crash - Kernel BUG at hypervisor:53

[Jerone Young <jerone@xxxxxxxxx>]

What happens when you add "acpi=off" as an argument for the Xen kernel.

On 6/4/05, David F Barrera <dfbp@xxxxxxxxxx> wrote:
> Dom0 will not boot on x86_64. Here's a more complete log:
> --------------
>   Booting 'Xen Domain 0 on a FC4 Linux platform'
> 
> kernel (hd0,0)/boot/xen.gz dom0_mem=256000 com2=19200,8n1
> console=vga,com2 nore
> boot
>    [Multiboot-elf, <0x100000:0x5c358:0x22ca8>, shtab=0x17f078,
> entry=0x100000]
> module (hd0,0)/boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0
>    [Multiboot-module @ 0x180000, 0x68c6d0 bytes]
> module (hd0,0)/boot/initrd-2.6.11.11-xen0
>    [Multiboot-module @ 0x80d000, 0x19cc00 bytes]
> 
>  __  __            _____  ___         _                _
>  \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
>   \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
>   /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
>  /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0-devel (root@xxxxxxxxxxxxxxxxxx) (gcc version 4.0.0
> 20050405 (Red Hat 4.0.0-0.40)) Fri Jun  3 09:18:15 CDT 2005
>  Latest ChangeSet: information unavailable
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 000000000009d400 (usable)
> (XEN)  000000000009d400 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000003ffbe680 (usable)
> (XEN)  000000003ffbe680 - 000000003ffd0000 (ACPI data)
> (XEN)  000000003ffd0000 - 0000000040000000 (reserved)
> (XEN)  00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 1023MB (1047916kB)
> (XEN) Xen heap: 14MB (14820kB)
> (XEN) found SMP MP-table at 0009d540
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v000 IBM                                   ) @
> 0x00000000000fdfc0
> (XEN) ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> 0x000000003ffcff80
> (XEN) ACPI: FADT (v002 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> 0x000000003ffcfecÃâ
ÃââÂâ'Â
>                 (XEN) ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL
> 0x02002025) @ 0x0000000000000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
> (XEN) Processor #6 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
> apic_id 11, version 32, address 0xfec81400, GSI 72-95
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ11 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 4 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 3600.308 MHz processor.
> (XEN) Using scheduler: Bo1ÂâÂÂâ-XEN) CPU: L2 cache: 1024K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> (XEN) Booting processor 2/6 eip 90000
> (XEN) Initializing CPU#2
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> (XEN) CPU: L2 cache: 1024K
> (XEN) CPU: Physical Processor ID: 3
> (XEN) CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> (XEN) Booting processor 3/7 eip 90000
> (XEN) Initializing CPU#3
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> (XEN) CPU: L2 cache(XEN) Time init:
> (XEN) .... cpu_freq:    00000000:D6985928
> (XEN) .... scale:       00000001:1C6B89AF
> (XEN) .... Wall Clock:  1117792227s 180000us
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80100000,LOADER=generic'
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000008000000->0000000010000000 (31232 pages to
> be allocated)
> (XEN) VIRTUAL MEMORY ARRK2âââââââââââââââXEN)  Init. ramdisk:
> ffffffff80584000->ffffffff80720c00
> (XEN)  Phys-Mach map: ffffffff80721000->ffffffff8075f800
> (XEN)  Page tables:   ffffffff80760000->ffffffff80767000
> (XEN)  Start info:    ffffffff80767000->ffffffff80768000
> (XEN)  Boot stack:    ffffffff80768000->ffffffff80769000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff80800000
> (XEN)  ENTRY ADDRESS: ffffffff80100000
> (XEN) Initrd len 0x19cc00, start at 0xffffffff80584000
> (XEN) Scrubbing Free RAM: ...........done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen).
> Linux version 2.6.11.11-xen0 (root@xxxxxxxxxxxxxxxxxxxxxxxxx) (gcc
> version 4.0.0 20050405 (Red Hat 4.0.0-0.40)) #1 Fri Jun 3 09:24:34 CDT
> 2005
> kernel direct mapping tables upto ffff88000fa00000 @ 800000-87f000
> Registering memory for bootmem: from  a00000, size = f000000
> No mptable found.
> arch/xen/x86_64/mm/init.c:336: bad pte
> ffff88000136eec8(0000055555555067).
> arch/xen/x86_64/mm/init.c:336: bad
> ptâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂâÃÂÂÃâÂÃ}ÂÂÂÂÂÃÂââ'ÃÃâââââââÂÂ'mÃÂuâ''ÃâÃÃmÃââÂ000]
>  gsi_base[48])Ã}ÂÂÂÂÂÃÂââ']âââÃâââÅÅÂ*âÂ
> IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
> ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
> IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Built ÂÃâÃâÃÃâ'Â'âÃâÂÂÂÂÃount-cache hash table entries: 256 (order: 0,
> 4096 bytes)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU:                   Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20050211
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller
> 0]Zâ+%âÃÂÂÃÂâÃÃâÃâ'âÃÂÂâÃÂÃÃÂÃÃÂÃÂÂÂÂÂÃÂÃÃÃÂâââÂÃââÂâÃÃâÃÂâ'ÃÂÃâÃââÂÂâ'ÃÂÂâÂÂÃÂÂ}âÂââÂâ}'âÃÂÂâÃâÃâÂÃÂÃâÃÃÃÂÃÂâÃÂÃÂ'ÃÂâÃÂÂÃÂÃÃâÂÃÃâÃÂÃÂâÂÃÃâÃÃÂÃâÃÃÂâÂÂ'ââÂâÃÂÂÃ%âÃÂÂÃâÃÂÃÂâÂÃÂâÂâÃÃÂâ'âÃÂÂâÃÂÃÂâÂâÂÂÃÂââÃÃÃÃÃÂÂÃâÃÂÂÂA%8042.c:
>  Can't read CTR while initializing i8042.
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> Floppy drive(s): fd0 is 1.44M
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> loop: loaded (max 8 devices)
> HP CISS Driver (v 2.6.4)
> Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> Copyright (c) 1999-2004 Intel Corporation.
> pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
> e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> e100: Copyright(c) 1999-2004 Intel Corporation
> tg3.c:v3.23 (February 15, 2005)
> ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
> ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at hypervisor:53
> invalid operand: 0000 [1]
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> RIP: e030:[<ffffffff80118911>]
> <ffffffff80118911>{xen_l1_entry_update+113}
> RSP: e02b:ffff880000a05c08  EFLAGS: 00010282
> RAX: 00000000ffffffea RBX: ffff800000000000 RCX: ffffffff8011890d
> RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880000a05c08
> RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff880000a05c78
> R10: 0000000000007ff0 R11: 0000000000000202 R12: 0000000000000001
> R13: ffff88000f9e4000 R14: ffff88000f9e4000 R15: 0000000000000400
> FS:  0000000000000000(0000) GS:ffffffff804e3980(0000)
> knlGS:0000000000000000
> CS:  e033 DS: 0000 ES: 0000
> Process swapper (pid: 1, threadinfo ffff880000a04000, task
> ffff880000a11440)
> Stack: 000000000887ef20 800000003ffba067 ffff880000a05c58
> ffffffff80113d84
>        ffff880000a05c78 000000000f9e4000 ffff88008f9e4000
> 000000000f9e4000
>        ffff88008f9e4000 ffff880000a05cc0
> Call Trace:<ffffffff80113d84>{dma_alloc_coherent+1028}
> <ffffffff80535365>{tg3_test_dma+53}
>        <ffffffff80536ec0>{tg3_init_one+6400}
> <ffffffff80109eb6>{evtchn_do_upcall+118}
>        <ffffffff8020eaaf>{pci_device_probe+95}
> <ffffffff8024760d>{driver_probe_device+77}
>        <ffffffff80247686>{driver_attach+70}
> <ffffffff8024775e>{bus_add_driver+142}
>        <f
> --
> 
> David F Barrera
> IBM Linux Technology Center
> dfbp@xxxxxxxxxx
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel