|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [Fwd: RE: [Fwd: x86_64 - Kernel BUG at hypervisor:53]]
DomUs aren't known to work yet, we're getting there...
sRp
On Wed, Jun 08, 2005 at 02:13:13PM -0500, David F Barrera wrote:
> Jun,
>
> OK. I am able to boot Dom0 on x86_64 SLES 9 now with the patch you
> suggested (Scott's). I haven't tried booting a DomU yet..
>
> David
>
> -------- Forwarded Message --------
> From: David F Barrera <dfbp@xxxxxxxxxx>
> To: Nakajima, Jun <jun.nakajima@xxxxxxxxx>
> Subject: RE: [Fwd: x86_64 - Kernel BUG at hypervisor:53]
> Date: Wed, 08 Jun 2005 13:20:46 -0500
> Jun,
>
> It went further this time, past the previous failure. I need to figure
> out what is going on now. Thx for the suggestion.
>
> This is the error I'm getting now (I did build an initrd for the xen0
> kernel).
>
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Warning: unable to open an initial console.
> Kernel panic - not syncing: No init found. Try passing init= option to
> kernel.
>
> On Wed, 2005-06-08 at 09:22 -0700, Nakajima, Jun wrote:
> > David F Barrera wrote:
> > > Jun,
> > >
> > > This is a more complete log than the previous on. Both the tg3 AND the
> > > pcnet32 drivers show up. I guess the serial port munges data
> > > sometimes.
> > David,
> >
> > Can you try the one Scott did? See attached. I suspect it's NX bit or
> > the physical frame is beyond dom0, and Xen does not allow dom0 to map.
> >
> > Jun
> >
> > >
> > > David
> > >
> > > Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> > > Copyright (c) 1999-2004 Intel Corporation.
> > > pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
> > > e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> > > e100: Copyright(c) 1999-2004 Intel Corporation
> > > tg3.c:v3.23 (February 15, 2005)
> > > ----------- [cut here ] --------- [please bite here ] ---------
> > > Kernel BUG at hypervisor:53
> > > invalid operand: 0000 [1]
> > > CPU 0
> > > Modules linked in:
> > > Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> > > RIP: e030:[<ffffffff80118db1>] <ffffffff80118db1>{xen_l1_entry_update
> > > +113}
> > > RSP: e02b:ffff8800017c3bf8 EFLAGS: 00010282
> > > RAX: 00000000ffffffea RBX: ffff88001f189000 RCX: ffffffff80118dad
> > > RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800017c3bf8
> > > RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff8800017c3c48
> > > R10: 0000000000007ff0 R11: 0000000000000206 R12: ffff88001f189000
> > > R13: 003fffe20027c624 R14: 000000000007c624 R15: 000000000001f189
> > > FS: 0000000000000000(0000) GS:ffffffff804d8200(0000)
> > > knlGS:0000000000000000
> > > CS: e03L*\uffff\uffff\uffff\u0745\uffff\uffff\uffff\uffff\uffff\uffff
> > >
> > \uffff\u0461\u0255\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff
> > > \uffff\uffff\u0445\u036d\uffff\uffff\uffff\uffff\uffffM\u0445\uffff
> > >
> > \uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff
> > >
> > \uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff
> > > \uffff\uffff0803248f2
> > > ffff8800017c3cc0 0000000000000400
> > > Call Trace:<ffffffff80113de2>{dma_alloc_coherent+1074}
> > > <ffffffff8052aa5f>{tg3_init_one+6783}
> > > <ffffffff8020a1a1>{pci_device_probe+113}
> > > <ffffffff80242cdd>{driver_probe_device+77}
> > > <ffffffff80242fd6>{driver_attach+70}
> > > <ffffffff802430b8>{bus_add_driver+152}
> > > <ffffffff80243802>{driver_register+50}
> > > <ffffffff80526d40>{pcnet32_init_module+96}
> > > <fffff
> > >
> > >
> > > -------- Forwarded Message --------
> > > From: David F Barrera <dfbp@xxxxxxxxxx>
> > > To: jun.nakajima@xxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
> > > Subject: x86_64 - Kernel BUG at hypervisor:53
> > > Date: Wed, 08 Jun 2005 09:04:07 -0500
> > > Jun,
> > >
> > > Notice the difference: no tg3 but now pcnet32 shows up on the dump.
> > > Same
> > > machine as before, though.
> > >
> > > David
> > >
> > > This is the log from todays boot attempt:
> > >
> > > __ __ _____ ___ _ _
> > > \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
> > > \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
> > > / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
> > > /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
> > >
> > > http://www.cl.cam.ac.uk/netos/xen
> > > University of Cambridge Computer Laboratory
> > >
> > > Xen version 3.0-devel (root@xxxxxxxxxxxxxxxxxx) (gcc version 3.3.3
> > > (SuSE
> > > Linux)) Wed Jun 8 02:46:34 CDT 2005
> > > Latest ChangeSet: information unavailable
> > >
> > > (XEN) Physical RAM map:
> > > (XEN) 0000000000000000 - 000000000009d400 (usable)
> > > (XEN) 000000000009d400 - 00000000000a0000 (reserved)
> > > (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> > > (XEN) 0000000000100000 - 000000003ffbe680 (usable)
> > > (XEN) 000000003ffbe680 - 000000003ffd0000 (ACPI data)
> > > (XEN) 000000003ffd0000 -
> > >
> > 00000000\uffffM\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u0465\uf
> > fff\uffff\uffffXEN)
> > > Virtual Wire compatibility mode.
> > > (XEN) OEM ID: IBM ENSW Product ID: BLADER SMP APIC at: 0xFEE00000
> > > (XEN) Processor #0 15:4 APIC version 20
> > > (XEN) Processor #6 15:4 APIC version 20
> > > (XEN) I/O APIC #14 Version 32 at 0xFEC00000.
> > > (XEN) I/O APIC #13 Version 32 at 0xFEC10000.
> > > (XEN) I/O APIC #12 Version 32 at 0xFEC81000.
> > > (XEN) I/O APIC #11 Version 32 at 0xFEC81400.
> > > (XEN) Enabling APIC mode: Flat. Using 4 I/O APICs
> > > (XEN) Processors: 2
> > > (XEN) Initializing CPU#0
> > > (XEN)\uffff-XEN) CPU: Physical Processor ID: 3
> > > (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> > > (XEN) Total of 2 processors activated.
> > > (XEN) WARNING: 1 siblings found for CPU0, should be 2
> > > (XEN) WARNING: 1 siblings found for CPU1, should be 2
> > > (XEN) ENABLING IO-APIC IRQs
> > > (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> > > (XEN) checking TSC synchronization across 2 CPUs: passed.
> > > (XEN) Time init:
> > > (XEN) .... cpu_freq: 00000000:D69873E0
> > > (XEN) .... scale: 00000001:1C6B6645
> > >
> > AU\uffffa9\uffff\uffff\uffff\uffff\uffffa91=%9=5%9a9a\uffff\uffff1\uffff
> > \uffff\uffff\uffff\uffff\u0259\uffff\u0579\uffffUMQ}=M\uffff\uffff\uffff
> > \uffff\uffffUMQ}YIa9}YIY%IQ}
> > > M155=IeII959Qa9\uffff\uffff\uffff\uffff\uffff\uffff\uffff00020000000
> > > (62464 pages to be allocated)
> > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > > (XEN) Loaded kernel: ffffffff80100000->ffffffff80576086
> > > (XEN) Init. ramdisk: ffffffff80577000->ffffffff80577000
> > > (XEN) Phys-Mach map: ffffffff80577000->ffffffff805f4000
> > > (XEN) Page tables: ffffffff805f4000->ffffffff805fb000
> > > (XEN) Start info: ffffffff805fb000->f 65536 (order: 7, 524288
> > > bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> > > Memory: 493568k/512000k available (2610k kernel code, 7872k reserved,
> > > 949k data, 428k init)
> > > Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
> > > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > > CPU: L2 cache: 1024K
> > > CPU: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> > > NET: Registered protocol family 16
> > > PCI: Using configuration type 1
> > > ACPI: Subsystem revision 20050211
> > > ACPI: Interprfloppy0: no floppy controllers found
> > > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> > > loop: loaded (max 8 devices)
> > > HP CISS Driver (v 2.6.4)
> > > Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> > > Copyright (c) 1999-2004 Intel Corporation.
> > > pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
> > > e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> > > e100: Copyright(c) 1999-2004 Intel Corporation
> > > tg3.c:v3.23 (February 15, 2005)
> > > ----------- [cut here ] --------- [please bite here ] ---------
> > > Kernel BUG at hypervisor:53
> > > invalid operand: 0000 [1]
> > > CPU 0
> > > Modules linked in:
> > > Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> > > RIP: e030:[<ffffffff80118db1>]
> > > <ffffffff80118db1>{xen_l1_entry_update+113}
> > > RSP: e02b:ffff8800017c3bf8 EFLAGS: 00010282
> > > RAX: 00000000ffffffea RBX: ffff88001f189000 RCX: ffffffff80118dad
> > > RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800017c3bf8
> > > RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff8800017c3c48
> > > R10: 0000000000007ff0 R11: 0000000000000206 R12: ffff88001f189000
> > > R13: 003fffe20027c624 R14: 000000000007c624 R15: 000000000001f189
> > > FS: 0000000000000000(0000) GS:ffffffff804d8200(0000)
> > > knlGS:0000000000000000
> > > CS: e033 DS: 0000 ES:20a1a1>{pci_device_probe+113}
> > > <ffffffff80242cdd>{driver_probe_device+77}
> > > <ffffffff80242fd6>{driver_attach+70}
> > > <ffffffff802430b8>{bus_add_driver+152}
> > > <ffffffff80243802>{driver_register+50}
> > > <ffffffff80526d40>{pcnet32_init_module+96}
> > > <ffffffff8020a249>{pci_register_driver+73}
> > > <ffffffff801090ea>{init+170} <ffffffff8010deeb>{child_rip+8}
> > > <ffffffff8028e441>{kcons_write_dom0+33} <ffffffff80109040>{init+0}
> > > <ffffffff8010dee3>{child_rip+0}
> > >
> > >
> > > Code: 0f
> > >
> > >
> > > -------- Forwarded Message --------
> > > From: David F Barrera <dfbp@xxxxxxxxxx>
> > > To: Nakajima, Jun <jun.nakajima@xxxxxxxxx>
> > > Subject: RE: [Xen-devel] Latest bk can NOT compile on x86_64
> > > Date: Thu, 02 Jun 2005 11:01:41 -0500
> > > On Thu, 2005-06-02 at 08:04 -0700, Nakajima, Jun wrote:
> > >> David,
> > >>
> > >> Does your machine have Broadcom Tigon3?
> > > Yes, it does. I see the 'tg3' module loaded.
> > >>
> > >> Jun
> > >> ---
> > >> Intel Open Source Technology Center
> > >>
> > >> -----Original Message-----
> > >> From: David F Barrera [mailto:dfbp@xxxxxxxxxx]
> > >> Sent: Thursday, June 02, 2005 7:53 AM
> > >> To: Nakajima, Jun
> > >> Subject: RE: [Xen-devel] Latest bk can NOT compile on x86_64
> > >>
> > >> On Wed, 2005-06-01 at 11:11 -0700, Nakajima, Jun wrote:
> > >>> David F Barrera wrote:
> > >>>> On Wed, 2005-06-01 at 09:26 -0700, Nakajima, Jun wrote:
> > >>>>> David F Barrera wrote:
> > >>>>>> On Wed, 2005-06-01 at 08:21 -0700, Nakajima, Jun wrote:
> > >>>>>>> David, Hi,
> > >>>>>>>> Jun,
> > >>>>>>>>
> > >>>>>>>> I got your message this morning, so I did not get a chance to
> > >>>>>>>> give you the info you requested. This morning, I am seeing a
> > >>>>>>>> different error on x86_63 (refer to my earlier post to the
> > >>>>>>>> xen-developer list).
> > >>>>>>>>
> > >>>>>>> Yes, I saw it. I think the PAE patch caused some regression.
> > >>>>>>> BTW, did x86-64 xenlinux ever boot on the machine?
> > >>>>>>
> > >>>>>> Jun, please excuse my ignorance, but how do I boot xenlinux?
> > >>>>>>>
> > >>>>>
> > >>>>> I mean dom0 xenlinux, i.e. vmlinuz-2.6.11-xen0. Is this the first
> > >>>>> for you try x86-64 xenlinux on the machine? How much memory do
> > >>>>> you have on the machine?
> > >>>> I've never been able to boot Dom0 on an x86_64 machine. The machine
> > >>>> has 1GB of memory.
> > >>>>>
> > >>> Are you using loadable drivers? Can you remove the initrd from the
> > >>> boot file (making the things static)?
> > >>
> > >> Jun, I tried it and it made no difference.
> > >> I am still seeing the same error with the latest BK build. Here's
> > >> the log:
> > >>
> > >> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
> > >> blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.4)
> > >> Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> > >> Copyright (c) 1999-2004 Intel Corporation.
> > >> pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
> > >> e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> > >> e100: Copyright(c) 1999-2004 Intel Corporation
> > >> tg3.c:v3.23 (February 15, 2005)
> > >> ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
> > >> ----------- [cut here ] --------- [please bite here ] ---------
> > >> Kernel BUG at hypervisor:53 invalid operand: 0000 [1]
> > >> CPU 0
> > >> Modules linked in:
> > >> Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> > >> RIP: e030:[<ffffffff80118db1>]
> > >> <ffffffff80118db1>{xen_l1_entry_update +113} RSP:
> > >> e02b:ffff880000a05bf8 EFLAGS: 00010282
> > >> RAX: 00000000ffffffea RBX: ffff88000f9e4000 RCX: ffffffff80118dad
> > >> RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880000a05bf8
> > >>
> > M\uffffMMA\u027d\uffff\uffff\uffff\uffff\uffff\u0745\uffff\uffff\uffff
> > >>
> > \uffff\uffff\uffff\uffff\u0461\u0255\uffff\uffff\uffff\uffff\uffff\uffff
> > >> \uffff\uffff\uffff\uffff\uffff\u0445\u036d\uffff\uffff\uffff\uffff
> > >> \uffffM\u0445\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff
> > >>
> > \uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff
> > >> \uffff\uffff\uffff\uffff\uffff\uffff24952
> > >> ffff880000a05cc0 0000000000000400
> > >> Call Trace:<ffffffff80113de2>{dma_alloc_coherent+1074}
> > >> <ffffffff8052aaaf>{tg3_init_one+6783}
> > >> <ffffffff801221fb>{__do_softirq+107}
> > >> <ffffffff8012229d>{do_softirq+61}
> > >> <ffffffff8010dcd1>{do_hypervisor_callback+17}
> > >> <ffffffff8020a1a1>{pci_device_probe+113}
> > >> <ffffffff80242cdd>{driver_probe_device+77}g: Attempted to
> > >> kill init!
> > >>
> > >>
> > >>
> > >>>
> > >>> Jun
> > >>> ---
> > >>> Intel Open Source Technology Center
> >
> >
> >
> > Jun
> > ---
> > Intel Open Source Technology Center
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
--
Scott Parish
Signed-off-by: srparish@xxxxxxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |