[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Problems booting 32-bit Domain 0 and 32 bit Xen on x86_64 hardware


  • To: <xen-devel@xxxxxxxxxxxxxxxxxxx>
  • From: "Subrahmanian, Raj" <raj.subrahmanian@xxxxxxxxxx>
  • Date: Tue, 19 Jul 2005 01:16:31 -0400
  • Cc: "Vessey, Bruce A" <Bruce.Vessey@xxxxxxxxxx>
  • Delivery-date: Tue, 19 Jul 2005 05:15:21 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>
  • Thread-index: AcWMIQYP1Nojw+NwRhiWWffVyz+M0w==
  • Thread-topic: Problems booting 32-bit Domain 0 and 32 bit Xen on x86_64 hardware

 All,
I am running on x86_64 hardware, but running it in 32 bit mode, i.e., all the 
software and the Linux (Suse Sles 9) is in 32 bit.

The box has two Intel Xeon EMT64 procs with hyperthreading enabled with 2 Gigs 
of RAM.
I find that when I install and run xen (the unstable build ChangeSet: Sat Jul 
16 12:45:24 2005 722c372fe2017414acd568874a313a8f5e8685f5) the system crashes 
on Dom0 boot.
I am running the 2.6.11 kernel for Dom0

Here is the relevant dump, from the serial output.
At this point, I tried to attach gdb, but without success.

Raj
  __            _____  ___         _                _
 \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
  \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
  /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
 /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|

 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0-devel (root@site) (gcc version 3.3.3 (SuSE Linux)) Tue Jul 19 
0 0:02:04 EDT 2005
 Latest ChangeSet: Sat Jul 16 12:45:24 2005 722c372fe2017414acd568874a313a8f5e86
85f5

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 00000000000a0000 (usable)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000007fe8ac00 (usable)
(XEN)  000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
(XEN)  000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
(XEN)  000000007fe8ec00 - 0000000080000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fed00400 (reserved)
(XEN)  00000000fed20000 - 00000000feda0000 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2046MB (2095272kB)
(XEN) Xen heap: 10MB (10588kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 DELL                                  ) @ 0x000febf0
(XEN) ACPI: RSDT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcb98
(XEN) ACPI: FADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcbd8
(XEN) ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc4413
(XEN) ACPI: MADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcc4c
(XEN) ACPI: BOOT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccd6
(XEN) ACPI: ASF! (v016 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccfe
(XEN) ACPI: MCFG (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcd65
(XEN) ACPI: HPET (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcda3
(XEN) ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
(XEN) Processor #6 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
(XEN) Processor #1 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
(XEN) Processor #7 15:3 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 2992.626 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Time init:
(XEN) .... cpu_freq:    00000000:B25FDB1C
(XEN) .... scale:       00000001:562CA1E6
(XEN) .... Wall Clock:  1121745978s 130000us
(XEN) Brought up 4 CPUs
(XEN) Xendbg initialised.
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=
0xC0000000,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   20000000->40000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c05d2bc4
(XEN)  Init. ramdisk: c05d3000->c05d3000
(XEN)  Phys-Mach map: c05d3000->c0653000
(XEN)  Page tables:   c0653000->c0656000
(XEN)  Start info:    c0656000->c0657000
(XEN)  Boot stack:    c0657000->c0658000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: .....................done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen
).
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) CPU:    0
(XEN) EIP:    e019:[<c010000d>]
(XEN) EFLAGS: 00000282   CONTEXT: guest
(XEN) eax: 00000000   ebx: 00000000   ecx: 00000000   edx: 00000000
(XEN) esi: c0656200   edi: c0597620   ebp: 00000000   esp: c0657ff0
(XEN) cr0: 8005003b   cr3: 20653000
(XEN) ds: e021   es: e021   fs: e021   gs: e021   ss: e021   cs: e019
(XEN) Guest stack trace from esp=c0657ff0:
(XEN)    00000820 c010000d 0001e019 00010282
(XEN) Waiting for GDB to attach to XenDBG


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.