[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] Problems booting 32-bit Domain 0 and 32 bit Xen on x86_64 hardware



Sorry, my mistake. I am having this problem with the matched dom0 (the 2.6.12. 
kernel). 
So, I don't think that compatibility is the issue.

Raj

-----Original Message-----
From: Keir Fraser [mailto:Keir.Fraser@xxxxxxxxxxxx]
Sent: Tuesday, July 19, 2005 2:04 AM
To: Subrahmanian, Raj
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Vessey, Bruce A
Subject: Re: [Xen-devel] Problems booting 32-bit Domain 0 and 32 bit Xen
on x86_64 hardware



On 19 Jul 2005, at 06:16, Subrahmanian, Raj wrote:

> I am running on x86_64 hardware, but running it in 32 bit mode, i.e., 
> all the software and the Linux (Suse Sles 9) is in 32 bit.
>
> The box has two Intel Xeon EMT64 procs with hyperthreading enabled 
> with 2 Gigs of RAM.
> I find that when I install and run xen (the unstable build ChangeSet: 
> Sat Jul 16 12:45:24 2005 722c372fe2017414acd568874a313a8f5e8685f5) the 
> system crashes on Dom0 boot.
> I am running the 2.6.11 kernel for Dom0
>
> Here is the relevant dump, from the serial output.
> At this point, I tried to attach gdb, but without success.

You need to run a matched dom0. Older dom0's (like your 2.6.11 must be) 
will not work.

We don;t keep backward compatibility in the unstable tree, only during 
stable series.

  -- Keir


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.