Re: [Xen-devel] Xen / Dell 2850 PERC 4e/Di lock up

[Shane Chen <inconceivable@xxxxxxxxx>]

On 7/19/05, Will DeHaan <will@xxxxxxxx> wrote:
> Dell's PERC4e/Di controllers with firmware older than 516A are known to
> lock up due to overly aggressive cache memory timing. The megaraid driver
> is suspect of course but ensure your firmware is current.

megaraid: fw version:[516A] bios version:[H418]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
  Vendor: PE/PV     Model: 1x6 SCSI BP       Rev: 1.0
  Type:   Processor                          ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
  Vendor: MegaRAID  Model: LD 0 RAID5  279G  Rev: 516A
  Type:   Direct-Access                      ANSI SCSI revision: 02


Shane

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel