|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] dma_alloc_coherent issue with tg3 in x86_64 build
What build are you using? I have a dual opteron with the same card & driver (tg3) ... and works fine. I'll try today's build. But the build I'm using is only a few days old and has no problems with x86-64. I'll try todays and see what happens. On Thu, 2005-07-28 at 12:36 -0700, Chris Wright wrote: > During boot of dom0, I get the following. Box is remote, so I'm > now waiting for proxy power button pusher ;-) tg3 init fails doing > dma_alloc_coherent (I assume this is from tg3_init_one -> tg3_test_dma -> > pci_alloc_consistent -> dma_alloc_coherent). Looks like an issue with > the amount of memory in dom0. Is this known? > > thanks, > -chris > > root (hd0,0) > Filesystem type is ext2fs, partition type 0x83 > kernel /xen.gz com1=115200,8n1 console=com1,vga > [Multiboot-elf, <0x100000:0x7c3e0:0x29c20>, shtab=0x1a6078, entry=0x100000] > module /vmlinuz-2.6.12-xen0 root=/dev/VolGroup00/LogVol00 ro > console=tty0,ttyS0 > [Multiboot-module @ 0x1a7000, 0x6b43f8 bytes] > module /initrd-generic-2.6.img > [Multiboot-module @ 0x85c000, 0x2ab400 bytes] > > __ __ _____ ___ _ _ > \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | > \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | > / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | > /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0-devel (chrisw@xxxxxxxxxxxx) (gcc version 3.4.3 20041125 (Red > Hat 3.4.3-7)) Thu Jul 28 10:54:44 PDT 2005 > Latest ChangeSet: Thu Jul 28 05:34:45 2005 > 501a70f3ae968e46e27b9003febf05253f4cf949 > > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009dc00 (usable) > (XEN) 000000000009dc00 - 00000000000a0000 (reserved) > (XEN) 00000000000d0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000007ff60000 (usable) > (XEN) 000000007ff60000 - 000000007ff72000 (ACPI data) > (XEN) 000000007ff72000 - 000000007ff80000 (ACPI NVS) > (XEN) 000000007ff80000 - 0000000080000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec00400 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000fff80000 - 0000000100000000 (reserved) > (XEN) System RAM: 2046MB (2096116kB) > (XEN) Xen heap: 14MB (14632kB) > (XEN) found SMP MP-table at 000f7270 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: RSDP (v002 PTLTD ) @ > 0x00000000000f7210 > (XEN) ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ > 0x000000007ff6d5a7 > (XEN) ACPI: FADT (v003 AMD HAMMER 0x06040000 PTEC 0x000f4240) @ > 0x000000007ff71d0f > (XEN) ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ > 0x000000007ff71e03 > (XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ > 0x000000007ff71ecb > (XEN) ACPI: ASF! (v016 MBI CETP 0x06040000 PTL 0x00000001) @ > 0x000000007ff71f59 > (XEN) ACPI: DSDT (v001 AMD-K8 AMDACPI 0x06040000 MSFT 0x0100000e) @ > 0x0000000000000000 > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) Processor #0 15:5 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > (XEN) Processor #1 15:5 APIC version 16 > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x03] address[0xc0000000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 3, version 17, address 0xc0000000, GSI 24-27 > (XEN) ACPI: IOAPIC (id[0x04] address[0xc0001000] gsi_base[28]) > (XEN) IOAPIC[2]: apic_id 4, version 17, address 0xc0001000, GSI 28-31 > (XEN) ACPI: IOAPIC (id[0x05] address[0xc0600000] gsi_base[32]) > (XEN) IOAPIC[3]: apic_id 5, version 17, address 0xc0600000, GSI 32-35 > (XEN) ACPI: IOAPIC (id[0x06] address[0xc0601000] gsi_base[36]) > (XEN) IOAPIC[4]: apic_id 6, version 17, address 0xc0601000, GSI 36-39 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) Enabling APIC mode: Flat. Using 5 I/O APICs > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Initializing CPU#0 > (XEN) Detected 1994.377 MHz processor. > (XEN) Using scheduler: Simple EDF Scheduler (sedf) > (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > (XEN) CPU: L2 Cache: 1024K (64 bytes/line) > (XEN) CPU0: AMD Opteron(tm) Processor 246 stepping 08 > (XEN) Booting processor 1/1 eip 90000 > (XEN) Initializing CPU#1 > (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > (XEN) CPU: L2 Cache: 1024K (64 bytes/line) > (XEN) CPU1: AMD Opteron(tm) Processor 246 stepping 08 > (XEN) Total of 2 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 > (XEN) checking TSC synchronization across 2 CPUs: passed. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 2 CPUs > (XEN) mtrr: v2.0 (20020519) > (XEN) mtrr: your CPUs had inconsistent fixed MTRR settings > (XEN) mtrr: probably your BIOS does not setup all CPUs. > (XEN) mtrr: corrected configuration. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen-ELF header found: > 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80000000,LOADER=generic' > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000020000000->0000000040000000 (382799 pages to be > allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff80100000->ffffffff805ab086 > (XEN) Init. ramdisk: ffffffff805ac000->ffffffff80857400 > (XEN) Phys-Mach map: ffffffff80858000->ffffffff80a4dd3c > (XEN) Page tables: ffffffff80a4e000->ffffffff80a57000 > (XEN) Start info: ffffffff80a57000->ffffffff80a58000 > (XEN) Boot stack: ffffffff80a58000->ffffffff80a59000 > (XEN) TOTAL: ffffffff80000000->ffffffff80c00000 > (XEN) ENTRY ADDRESS: ffffffff80100000 > (XEN) Initrd len 0x2ab400, start at 0xffffffff805ac000 > (XEN) Scrubbing Free RAM: .....................done. > (XEN) Xen trace buffers: initialised > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen). > Linux version 2.6.12.2-xen0 (chrisw@xxxxxxxxxxxxxxxxxx) (gcc version 3.4.3 > 20041125 (Red Hat 3.4.3-7)) #6 Thu Jul 28 10:53:46 PDT 2005 > kernel direct mapping tables upto ffff88007d74f000 @ c00000-fef000 > Registering memory for bootmem: from 1000000, size = 7c74f000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xc0000000] gsi_base[24]) > IOAPIC[1]: apic_id 3, version 17, address 0xc0000000, GSI 24-27 > ACPI: IOAPIC (id[0x04] address[0xc0001000] gsi_base[28]) > IOAPIC[2]: apic_id 4, version 17, address 0xc0001000, GSI 28-31 > ACPI: IOAPIC (id[0x05] address[0xc0600000] gsi_base[32]) > IOAPIC[3]: apic_id 5, version 17, address 0xc0600000, GSI 32-35 > ACPI: IOAPIC (id[0x06] address[0xc0601000] gsi_base[36]) > IOAPIC[4]: apic_id 6, version 17, address 0xc0601000, GSI 36-39 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 7d800000 (gap: 7d74f000:828b1000) > Built 1 zonelists > Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=tty0,ttyS0 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 131072 bytes) > Xen reported: 1994.377 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Memory: 2007552k/2055484k available (2820k kernel code, 31364k reserved, > 1119k data, 272k init) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU: AMD Opteron(tm) Processor 246 stepping 08 > checking if image is initramfs... it is > NET: Registered protocol family 16 > PCI: Using configuration type 1 > ACPI: Subsystem revision 20050309 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) > ACPI: PCI Root Bridge [PCI1] (0000:08) > PCI: Probing PCI hardware (bus 08) > xen_mem: Initialising balloon driver. > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Grant table initialized > IA-32 Microcode Update Driver: v1.14 <tigran@xxxxxxxxxxx> > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > Initializing Cryptographic API > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > Real Time Clock Driver v1.12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > loop: loaded (max 8 devices) > HP CISS Driver (v 2.6.6) > Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 > Copyright (c) 1999-2004 Intel Corporation. > pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx > e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > tg3.c:v3.31 (June 8, 2005) > ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 28 (level, low) -> IRQ 28 > (XEN) (file=dom_mem_ops.c, line=61) Could not allocate a frame > ----------- [cut here ] --------- [please bite here ] --------- > Kernel BUG at "arch/xen/x86_64/mm/hypervisor.c":299 > invalid operand: 0000 [1] > CPU 0 > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.12.2-xen0 > RIP: e030:[<ffffffff8011a32a>] <ffffffff8011a32a>{xen_contig_memory+586} > RSP: e02b:ffff880002ee1bf8 EFLAGS: 00010296 > RAX: 0000000000000000 RBX: 000000000000000c RCX: ffffffff8011a324 > RDX: 0000000000000001 RSI: ffff880002ee1c28 RDI: 00000000ffffffff > RBP: 0000000000000001 R08: 0000000000007ff0 R09: 0000000000000001 > R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 > R13: 0000000000000002 R14: 0000000000000001 R15: ffff800000000000 > FS: 0000000000000000(0000) GS:ffffffff80533a80(0000) knlGS:0000000000000000 > CS: e033 DS: 0000 ES: 0000 > Process swapper (pid: 1, threadinfo ffff880002ee0000, task ffff880002edf410) > Stack: 000000001002029a ffff880078cc6000 0000000202edf410 0000000052aa4d54 > 0000000000000000 ffff880078cc4000 0000000000044a89 0000000000000001 > ffff880078cc4000 0000000000000000 > Call Trace:<ffffffff80114920>{dma_alloc_coherent+224} > <ffffffff802a8096>{tg3_init_one+7302} > <ffffffff803bdafa>{wait_for_completion+170} > <ffffffff80126dd0>{default_wake_function+0} > <ffffffff802212d6>{pci_device_probe+134} > <ffffffff8025ac0d>{driver_probe_device+77} > <ffffffff8025ad2b>{driver_attach+75} > <ffffffff8025b118>{bus_add_driver+152} > <ffffffff80220fe5>{pci_register_driver+117} > <ffffffff801090f2>{init+178} > <ffffffff8010e567>{child_rip+8} <ffffffff80109040>{init+0} > <ffffffff8010e55f>{child_rip+0} > > Code: 0f 0b 08 91 3d 80 ff ff ff ff 2b 01 b8 01 00 00 00 44 89 f1 > RIP <ffffffff8011a32a>{xen_contig_memory+586} RSP <ffff880002ee1bf8> > <0>Kernel panic - not syncing: Attempted to kill init! > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-devel > -- Jerone Young IBM Linux Technology Center jyoung5@xxxxxxxxxx 512-838-1157 (T/L: 678-1157) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |