[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] Daily Xen Builds



On Mon, 2005-08-15 at 20:42 +0100, Ian Pratt wrote:
> > 2) x86_32p (PAE)
> > 
> > -- SLES 9 SP2 and RHEL 4 on IBM xSeries 305s (512M RAM) and 
> > 235 (1G RAM)
> > * The SLES 9 SP2 boxes FAILED TO BOOT Dom0 when built with PAE
> >     * Two (2) machines exhibiting this problem
> >     * Last message on console is the 'xen memory scrubbing' line
> 
> Please can you investigate by building and test booting versions between
> when it last worked for you and today -- it would really help us narrow
> this down quickly. Doing binary chop you should be able to narrow it
> down to a handul changesets without too many boots.
As I understand, it worked for Li Ge last week while I was at LWE, so I
should start with Friday's build.
> 
> > 3) x86_64
> > 
> > -- SLES9 SP2 and FC4 on IBM HS20 EMT64 blades (1G RAM)
> > * Builds and boots on SLES 9 SP2
> > * Problems starting xend (below)
> > 
> > * ISSUE(S): 
> > 
> > * Bugzilla #62 - Losing network when starting xend.
> >   * Still experiencing this problem on the SLES9 SP2 x86-64 boxes. 
> >   * Both SLES 9 SP2 boxes lose networking when 'xend start' 
> > is entered.
> 
> Please can you post xend.log, plus also the result of 'ifconfig' and
> 'brctl' before and after running 'xend start'.

The machine uses eth1, so I changed this line in the network-bridge
script:
netdev=${netdev:-eth1}

Q. Do I also need to change this line (line #191) in the current script
in unstable (I tried both eth0 and eth1--both times networking stopped):
ip link set veth0 name eth1


ifconfig (before):
bl2-1:~ # ifconfig
eth1      Link encap:Ethernet  HWaddr 00:11:25:9D:69:87
          inet addr:9.3.192.194  Bcast:9.3.192.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:610 errors:0 dropped:0 overruns:0 frame:0
          TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:87998 (85.9 Kb)  TX bytes:7413 (7.2 Kb)
          Interrupt:78

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1512 (1.4 Kb)  TX bytes:1512 (1.4 Kb)

brctl (before):
bl2-1:~ # brctl show
bridge name     bridge id               STP enabled     interfaces
bl2-1:~ #

xend start

ifconfig (after)
bl2-1:~ # ifconfig
eth1      Link encap:Ethernet  HWaddr 00:11:25:9D:69:87
          inet addr:9.3.192.194  Bcast:9.3.192.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:882 (882.0 b)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2664 (2.6 Kb)  TX bytes:2664 (2.6 Kb)

peth1     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:1141 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:251046 (245.1 Kb)  TX bytes:0 (0.0 b)
          Interrupt:78

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:756 (756.0 b)  TX bytes:0 (0.0 b)


brctl (after)
bl2-1:~ # brctl show
bridge name     bridge id               STP enabled     interfaces
xen-br0         8000.feffffffffff       no              vif0.0
                                                        peth1


> 
> Thanks,
> Ian
> 
-- 
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
                                                        Euripides


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.