[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH][VT] Enable multi-word DMA mode 2 for the PIIX3 chipset



Enable multi-word DMA mode 2 for the PIIX3 chipset

Without this patch, Linux PIIX3 driver would see ultra DMA and get confused
and ended up disabling DMA.

With the patch, we're able to see 3x increase in disk read throughput.

Signed-off-by: Winston Wang <winston.l.wang@xxxxxxxxx>
Signed-off-by: Arun Sharma <arun.sharma@xxxxxxxxx>

diff -r 29aab159846c -r b5196e075602 tools/ioemu/hw/ide.c
--- a/tools/ioemu/hw/ide.c      Mon Aug 15 18:32:29 2005
+++ b/tools/ioemu/hw/ide.c      Mon Aug 15 20:28:07 2005
@@ -430,6 +430,7 @@
         put_le16(p + 59, 0x100 | s->mult_sectors);
     put_le16(p + 60, s->nb_sectors);
     put_le16(p + 61, s->nb_sectors >> 16);
+    put_le16(p + 63, 0x07);
     put_le16(p + 80, (1 << 1) | (1 << 2));
     put_le16(p + 82, (1 << 14));
     put_le16(p + 83, (1 << 14));
@@ -460,7 +461,7 @@
     put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */
     put_le16(p + 49, 1 << 9); /* LBA supported, no DMA */
     put_le16(p + 53, 3); /* words 64-70, 54-58 valid */
-    put_le16(p + 63, 0x103); /* DMA modes XXX: may be incorrect */
+    put_le16(p + 63, 0x07); /* Multi-word DMA mode 2 */ 
     put_le16(p + 64, 1); /* PIO modes */
     put_le16(p + 65, 0xb4); /* minimum DMA multiword tx cycle time */
     put_le16(p + 66, 0xb4); /* recommended DMA multiword tx cycle time */

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.