|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Kernel panic, Domain 0 shutdown (was Aieee! CPU0 is toast...)
Hi,
I upgraded to the latest FC4 rpms on this server and got the serial debug to
work. We did "mv /lib/tls /lib/tls.disabled" but the tls message also
remained, which was not the case with older rpms.
We hope for help,
Thanks in advance,
Thomas
- kernel-xenU-2.6.12-1.1447_FC4, kernel-xen0-2.6.12-1.1447_FC4,
xen-2-20050823
- SELinux is fully disabled
- No X-Window system is installed
HW-Configuration:
IBM NetFinity 5500, Dual PIII-Xeon 600 MHz, 1.5GByte RAM, ServRAID RAID1,
QLogic 2200 HBA
on other hardware this xen version works fine.
--> /etc/grub.conf
title Fedora Core (2.6.12-1.1447_FC4smp)
root (hd0,0)
kernel /vmlinuz-2.6.12-1.1447_FC4smp ro root=/dev/VolGroup00/LogVol00
console=ttyS0,38400n8
initrd /initrd-2.6.12-1.1447_FC4smp.img title Fedora Core (2.6.12-
1.1447_FC4xen0)
root (hd0,0)
kernel /xen.gz dom0_mem=131072 com1=ttyS0,38400,8n1
module /vmlinuz-2.6.12-1.1447_FC4xen0 ro root=/dev/VolGroup00/LogVol00
module /initrd-2.6.12-1.1447_FC4xen0.img
--> mounting
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw) /dev/proc on /proc type
proc (rw) /dev/sys on /sys type sysfs (rw) /dev/devpts on /dev/pts type devpts
(rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
/dev/shm on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc
on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
automount(pid1666) on /misc type autofs
(rw,fd=4,pgrp=1666,minproto=2,maxproto=4)
automount(pid1712) on /net type autofs
(rw,fd=4,pgrp=1712,minproto=2,maxproto=4)
--> crash dump
GNU GRUB version 0.95 (624K lower / 1571820K upper memory)
+-------------------------------------------------------------------------+|
|||||||||||||||||||||||+------------------------------------------------
|||||||||||||||||||||||+----
---------------------+
Use the ^ and v keys to select which entry is highlighted.
Press 'b' to boot, 'e' to edit the selected command in the
boot sequence, 'c' for a command-line, 'o' to open a new line
after ('O' for before) the selected line, 'd' to remove the
selected line, or escape to go back to the main menu. root (hd0,0)
kernel /xen.gz dom0_mem=131072 com1=38400,8n1 module /vmlinuz-2.6.12-
1.1447_FC4xen0 ro root=/dev/VolGroup00/LogVol0> module /initrd-2.6.12-
1.1447_FC4xen0.img Booting command-list
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz dom0_mem=131072
com1=38400,8n1
[Multiboot-elf, <0x100000:0x6c1bc:0x27e44>, shtab=0x194078, entry=0x100000]
module /vmlinuz-2.6.12-1.1447_FC4xen0 ro root=/dev/VolGroup00/LogVol00
[Multiboot-module @ 0x195000, 0x33f794 bytes] module /initrd-2.6.12-
1.1447_FC4xen0.img
[Multiboot-module @ 0x4d5000, 0x40e800 bytes]
__ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (bhcompile@xxxxxxxxxxxxxxxx) (gcc version 4.0.1
20050727 (Red Hat 4.0.1-5)) Tue Aug 23 14:57:59 EDT 2005 Latest ChangeSet:
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009c000 (usable)
(XEN) 000000000009c000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000005fffb000 (usable)
(XEN) 000000005fffb000 - 0000000060000000 (ACPI data)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fffc0000 - 0000000100000000 (reserved)
(XEN) System RAM: 1535MB (1572444kB)
(XEN) Xen heap: 10MB (10620kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 0009c1d0
(XEN) DMI 2.1 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 IBM ) @ 0x000fdfd0
(XEN) ACPI: RSDT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @
0x5fffff80
(XEN) ACPI: FADT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @
0x5fffff00
(XEN) ACPI: MADT (v001 IBM SERKQUAD 0x00001000 IBM 0x00000000) @
0x5ffffe80
(XEN) ACPI: DSDT (v001 IBM SERKQUAD 0x00001000 MSFT 0x0100000b) @
0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
(XEN) Processor #3 6:7 APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:7 APIC version 17
(XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: NMI_SRC (dfl dfl global_irq 20)
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 547.584 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
(XEN) CPU: L2 cache: 512K
(XEN) CPU0: Intel Pentium III (Katmai) stepping 03
(XEN) Booting processor 1/0 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
(XEN) CPU: L2 cache: 512K
(XEN) CPU1: Intel Pentium III (Katmai) stepping 03
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) mtrr: your CPUs had inconsistent fixed MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER
=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 5e000000->5f000000 (28672 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04aaa98
(XEN) Init. ramdisk: c04ab000->c08b9800
(XEN) Phys-Mach map: c08ba000->c08da000
(XEN) Page tables: c08da000->c08de000
(XEN) Start info: c08de000->c08df000
(XEN) Boot stack: c08df000->c08e0000
(XEN) TOTAL: c0000000->c0c00000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Initrd len 0x40e800, start at 0xc04ab000
(XEN) Scrubbing Free RAM: ................done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
Linux version 2.6.12-1.1447_FC4xen0 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Fri Aug 26 21:13:28 EDT
2005 BIOS-provided physical RAM map:
Xen: 0000000000100000 - 0000000008000000 (usable) 128MB LOWMEM available.
Using x86 segment limits to approximate NX protection DMI 2.1 present.
IRQ lockup detection disabled
Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000) Built 1
zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing
CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported:
547.568 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache
hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: c8800000-
fbeb4000, maxmem 34000000
Memory: 119296k/131072k available (2356k kernel code, 10596k reserved, 715k
data, 208k init, 0k highmem) Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability Capability
LSM initialized as secondary Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
CPU0: Intel Pentium III (Katmai) stepping 03 Booting processor 1/1 eip c0100010
GDT: copying 256 bytes from c0102000 to c08e0000 Initializing CPU#1
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated
(2185.62 BogoMIPS).
Brought up 2 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 4154k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Grant table initialized
***************************************************************
***************************************************************
** WARNING: Currently emulating unsupported memory accesses **
** in /lib/tls libraries. The emulation is very **
** slow. To ensure full performance you should **
** execute the following as root: **
** mv /lib/tls /lib/tls.disabled **
** Offending process: udev (pid=37) **
***************************************************************
***************************************************************
Pausing... 5<6>IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1125504954.756:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Pausing... 4Pausing... 3Pausing...
2Pausing... 1Continuing...
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1C1942C715575330
- User ID: Red Hat, Inc. (Kernel Module GPG key)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:11.0 failed with error -22
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io
scheduler anticipatory registered io scheduler deadline registered io
scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K
size 1024 blocksize Xen virtual console successfully installed as ttyS0 Event-
channel device installed.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:13.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
hda: CRD-8400B, ATAPI CD/DVD-ROM drive
hda: Disabling (U)DMA for CRD-8400B (blacklisted) ide0 at 0x1f0-0x1f7,0x3f6 on
irq 14
hda: ATAPI 40X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse on isa0060/serio1
IP: routing cache hash table of 512 buckets, 8Kbytes TCP established hash
table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192
(order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192) Initializing IPsec
netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 208k freed SCSI subsystem initialized ips
0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch ips 0000:00:03.0: Bios
= 7.00.14, Firmware = 2.88.13, Device Driver =
7.10.18
ips 0000:00:03.0: These levels should match to avoid possible compatibility
problems.
scsi0 : IBM PCI ServeRAID 7.10.18 Build 731 <ServeRAID II>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
QLogic Fibre Channel HBA Driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Kernel panic - not syncing: Attempted to kill init!
[<c0123a83>] panic+0x53/0x240
[<c0164c8f>] unmap_vma_list+0x1f/0x30
[<c0127176>] do_exit+0x386/0x410
[<c01650f3>] do_munmap+0x113/0x150
[<c01272ca>] do_group_exit+0x8a/0xe0
[<c016518a>] sys_munmap+0x5a/0x80
[<c010a4e7>] syscall_call+0x7/0xb
smp_send_stop disable_local_APIC
stop_this_cpu disable_local_APIC
(XEN) Domain 0 shutdown: rebooting machine.
--> full successful boot with FC 4
Booting 'Fedora Core (2.6.12-1.1447_FC4smp)'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.12-1.1447_FC4smp ro root=/dev/VolGroup00/LogVol00
console=t
tyS0,38400n8
[Linux-bzImage, setup=0x1e00, size=0x17ab83]
initrd /initrd-2.6.12-1.1447_FC4smp.img
[Linux-initrd @ 0x37e21000, 0x1cef49 bytes]
Linux version 2.6.12-1.1447_FC4smp (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Fri Aug 26 20:57:13
EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fffb000 (usable)
BIOS-e820: 000000005fffb000 - 0000000060000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009c1d0
Using x86 segment limits to approximate NX protection
DMI 2.1 present.
Using APIC driver default
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable
ACPI
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: NF 5500 SMP APIC at: 0xFEE00000
Processor #3 6:7 APIC version 17
Processor #0 6:7 APIC version 17
I/O APIC #14 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,38400n8
Initializing CPU#0
CPU 0 irqstacks, hard=c042d000 soft=c040d000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 547.616 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1551792k/1572844k available (2087k kernel code, 19796k reserved,
775k data, 236k init, 655340k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Katmai) stepping 03
Booting processor 1/0 eip 3000
CPU 1 irqstacks, hard=c042e000 soft=c040e000
Initializing CPU#1
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Katmai) stepping 03
Total of 2 processors activated (2170.88 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1851k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd4fc, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050729
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered peer bus 01
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 9
PCI->APIC IRQ transform: 0000:00:13.2[D] -> IRQ 10
PCI->APIC IRQ transform: 0000:01:01.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:01:02.0[A] -> IRQ 9
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1125501496.030:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1C1942C715575330
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:11.0 failed with error -22
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:13.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
hda: CRD-8400B, ATAPI CD/DVD-ROM drive
hda: Disabling (U)DMA for CRD-8400B (blacklisted)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 236k freed
Red Hat nash version 4.2.15 starinput: AT Translated Set 2 keyboard on
isa0060/serio0
ting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading scsi_mod.ko module
logips2pp: Detected unknown logitech mouse model 1
SCSI subsystem initialized
Loading sd_mod.ko module
Loading ips.ko module
input: PS/2 Logitech Mouse on isa0060/serio1
ips 0000:00:03.0: Warning ! ! ! ServeRAID Version Mismatch
ips 0000:00:03.0: Bios = 7.00.14, Firmware = 2.88.13, Device Driver =
7.10.18
ips 0000:00:03.0: These levels should match to avoid possible compatibility
problems.
ips 0000:01:02.0: Warning ! ! ! ServeRAID Version Mismatch
ips 0000:01:02.0: Bios = 7.00.14, Firmware = 6.10.24, Device Driver =
7.10.18
ips 0000:01:02.0: These levels should match to avoid possible compatibility
problems.
scsi0 : IBM PCI ServeRAID 7.10.18 Build 731 <ServeRAID II>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
scsi1 : IBM PCI ServeRAID 7.10.18 Build 731 <ServeRAID 3H>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 71094272 512-byte hdwr sectors (36400 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71094272 512-byte hdwr sectors (36400 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: SDR Model: GEM200 Rev: 2
Type: Processor ANSI SCSI revision: 02
Loading scsi_transport_fc.ko module
Loading qla2xxx.ko module
QLogic Fibre Channel HBA Driver
Loading qla2200.ko module
qla2200 0000:01:01.0: Found an ISP2200, irq 11, iobase 0xf881c000
qla2200 0000:01:01.0: Configuring PCI space...
qla2200 0000:01:01.0: Configure NVRAM parameters...
qla2200 0000:01:01.0: Verifying loaded RISC code...
qla2200 0000:01:01.0: LIP reset occured (f8e1).
qla2200 0000:01:01.0: Waiting for LIP to complete...
qla2200 0000:01:01.0: LIP occured (f8e1).
qla2200 0000:01:01.0: LOOP UP detected (1 Gbps).
qla2200 0000:01:01.0: Topology - (Loop), Host Loop address 0x7d
scsi2 : qla2xxx
qla2200 0000:01:01.0:
QLogic Fibre Channel HBA Driver: 8.00.02b5-k
QLogic QLA22xx -
ISP2200: PCI (33 MHz) @ 0000:01:01.0 hdma+, host#=2, fw=2.02.06 TP
Loading dm-mod.k Vendor: o module
IBM Model: 3526 Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Vendor: IBM Model: 3526 Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdb: 1132462080 512-byte hdwr sectors (579821 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 1132462080 512-byte hdwr sectors (579821 MB)
SCSI device sdb: drive cache: write back
sdb: unknown partition table
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 5
Vendor: IBM Model: 3526 Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdc: 318767104 512-byte hdwr sectors (163209 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 318767104 512-byte hdwr sectors (163209 MB)
SCSI device sdc: drive cache: write back
sdc: unknown partition table
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 6
Vendor: IBM Model: 3526 Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdd: 283115520 512-byte hdwr sectors (144955 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 283115520 512-byte hdwr sectors (144955 MB)
SCSI device sdd: drive cache: write back
sdd: unknown partition table
Attached scsi disk sdd at scsi2, channel 0, id 0, lun 7
Vendor: IBM Model: Universal Xport Rev: 0401
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sde: 40960 512-byte hdwr sectors (21 MB)
SCSI device sde: drive cache: write through
SCSI device sde: 40960 512-byte hdwr sectors (21 MB)
SCSI device sde: drive cache: write through
sde: unknown partition table
Attached scsi disk sde at scsi2, channel 0, id 0, lun 31
Loading jbd.ko module
Loading ext3.ko module
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
Found volume group "VolGroup02" using metadata type lvm2
Found volume group "VolGroup00" using metadata type lvm2
Activating logical volumes
2 logical volume(s) in volume group "VolGroup00" now active
Creating root device
Mounting root filesystem
kSwitching to new root
journald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
unmounting old /proc
unmounting old /sys
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
cfq: depth 4 reached, tagging now on
INIT: version 2.85 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Initializing hardware... storage network audio done[ OK ]
Setting clock (utc): Wed Aug 31 17:18:26 CEST 2005 [ OK ]
Setting hostname www5.devcon.cc: [ OK ]
Setting up Logical Volume Management: 1 logical volume(s) in volume group
"VolGroup02" now active
2 logical volume(s) in volume group "VolGroup00" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00
/dev/VolGroup00/LogVol00: clean, 38636/8339520 files, 548642/8339456 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/boot: clean, 64/26104 files, 42797/104388 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling swap space: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Checking for new hardware [ OK ]
Starting pcmcia: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Starting auditd: [ OK ]
Starting RPC idmapd: [ OK ]
Starting Bluetooth services:[ OK ][ OK ]
Mounting other filesystems: [ OK ]
Starting automount: [ OK ]
Starting cups: [ OK ]
Starting sshd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting system message bus: [ OK ]
Starting HAL daemon: [ OK ]
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |