|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] Fix IPSec for Xen checksum offload packets
This patch fixes bug 143 (verified by Jim Dykman).
Thanks,
Jon
Signed-off-by: James Dykman <dykman@xxxxxxxxxx>
Signed-off-by: Jon Mason <jdmason@xxxxxxxxxx>
# HG changeset patch
# User jdmason@xxxxxxxxxx
# Node ID 079135b0d58fa0f8f4dc1b9b8ae4baab7d413f47
# Parent 57e6d721842703c08bf7dafbfb5efe3c9a44725d
The Xen checksum offload feature attempts to insert a TCP/UDP
checksums into already encrypted packets (esp4) in dom0. Obviously,
it is not possible to insert a checksum into an already encrypted
packet, so this patch inserts the checksum prior to encrypting
packets.
To do this cleanly, the TCP/UDP header pointers need to be pointed to
the correct spot, so this functionality has been abstracted into a new
function.
diff -r 57e6d7218427 -r 079135b0d58f linux-2.6-xen-sparse/net/core/dev.c
--- a/linux-2.6-xen-sparse/net/core/dev.c Fri Feb 3 18:45:14 2006
+++ b/linux-2.6-xen-sparse/net/core/dev.c Mon Feb 6 19:34:52 2006
@@ -1206,76 +1206,16 @@
return 0;
}
-#define HARD_TX_LOCK(dev, cpu) { \
- if ((dev->features & NETIF_F_LLTX) == 0) { \
- spin_lock(&dev->xmit_lock); \
- dev->xmit_lock_owner = cpu; \
- } \
-}
-
-#define HARD_TX_UNLOCK(dev) { \
- if ((dev->features & NETIF_F_LLTX) == 0) { \
- dev->xmit_lock_owner = -1; \
- spin_unlock(&dev->xmit_lock); \
- } \
-}
-
-/**
- * dev_queue_xmit - transmit a buffer
- * @skb: buffer to transmit
- *
- * Queue a buffer for transmission to a network device. The caller must
- * have set the device and priority and built the buffer before calling
- * this function. The function can be called from an interrupt.
- *
- * A negative errno code is returned on a failure. A success does not
- * guarantee the frame will be transmitted as it may be dropped due
- * to congestion or traffic shaping.
- *
- *
-----------------------------------------------------------------------------------
- * I notice this method can also return errors from the queue disciplines,
- * including NET_XMIT_DROP, which is a positive value. So, errors can
also
- * be positive.
- *
- * Regardless of the return value, the skb is consumed, so it is currently
- * difficult to retry a send to this method. (You can bump the ref count
- * before sending to hold a reference for retry if you are careful.)
- *
- * When calling this method, interrupts MUST be enabled. This is because
- * the BH enable code must have IRQs enabled so that it will not deadlock.
- * --BLG
- */
-
-int dev_queue_xmit(struct sk_buff *skb)
-{
- struct net_device *dev = skb->dev;
- struct Qdisc *q;
- int rc = -ENOMEM;
-
- if (skb_shinfo(skb)->frag_list &&
- !(dev->features & NETIF_F_FRAGLIST) &&
- __skb_linearize(skb, GFP_ATOMIC))
- goto out_kfree_skb;
-
- /* Fragmented skb is linearized if device does not support SG,
- * or if at least one of fragments is in highmem and device
- * does not support DMA from it.
- */
- if (skb_shinfo(skb)->nr_frags &&
- (!(dev->features & NETIF_F_SG) || illegal_highdma(dev, skb)) &&
- __skb_linearize(skb, GFP_ATOMIC))
- goto out_kfree_skb;
-
#ifdef CONFIG_XEN
- /* If a checksum-deferred packet is forwarded to a device that needs a
- * checksum, correct the pointers and force checksumming.
- */
+int xen_checksum_setup(struct sk_buff *skb)
+{
if (skb->proto_csum_blank) {
+ skb->proto_csum_blank = 0;
if (skb->protocol != htons(ETH_P_IP))
- goto out_kfree_skb;
+ goto out;
skb->h.raw = (unsigned char *)skb->nh.iph + 4*skb->nh.iph->ihl;
if (skb->h.raw >= skb->tail)
- goto out_kfree_skb;
+ goto out;
switch (skb->nh.iph->protocol) {
case IPPROTO_TCP:
skb->csum = offsetof(struct tcphdr, check);
@@ -1284,18 +1224,89 @@
skb->csum = offsetof(struct udphdr, check);
break;
default:
- if (net_ratelimit())
- printk(KERN_ERR "Attempting to checksum a non-"
- "TCP/UDP packet, dropping a protocol"
- " %d packet", skb->nh.iph->protocol);
- rc = -EPROTO;
- goto out_kfree_skb;
+ printk(KERN_ERR "Attempting to checksum a non-"
+ "TCP/UDP packet, dropping a protocol"
+ " %d packet", skb->nh.iph->protocol);
+ goto out;
}
if ((skb->h.raw + skb->csum + 2) > skb->tail)
- goto out_kfree_skb;
+ goto out;
skb->ip_summed = CHECKSUM_HW;
}
+
+ return 0;
+out:
+ return -EPROTO;
+}
+#else
+static inline int xen_checksum_setup(struct sk_buff *skb) {}
#endif
+
+#define HARD_TX_LOCK(dev, cpu) { \
+ if ((dev->features & NETIF_F_LLTX) == 0) { \
+ spin_lock(&dev->xmit_lock); \
+ dev->xmit_lock_owner = cpu; \
+ } \
+}
+
+#define HARD_TX_UNLOCK(dev) { \
+ if ((dev->features & NETIF_F_LLTX) == 0) { \
+ dev->xmit_lock_owner = -1; \
+ spin_unlock(&dev->xmit_lock); \
+ } \
+}
+
+/**
+ * dev_queue_xmit - transmit a buffer
+ * @skb: buffer to transmit
+ *
+ * Queue a buffer for transmission to a network device. The caller must
+ * have set the device and priority and built the buffer before calling
+ * this function. The function can be called from an interrupt.
+ *
+ * A negative errno code is returned on a failure. A success does not
+ * guarantee the frame will be transmitted as it may be dropped due
+ * to congestion or traffic shaping.
+ *
+ *
-----------------------------------------------------------------------------------
+ * I notice this method can also return errors from the queue disciplines,
+ * including NET_XMIT_DROP, which is a positive value. So, errors can
also
+ * be positive.
+ *
+ * Regardless of the return value, the skb is consumed, so it is currently
+ * difficult to retry a send to this method. (You can bump the ref count
+ * before sending to hold a reference for retry if you are careful.)
+ *
+ * When calling this method, interrupts MUST be enabled. This is because
+ * the BH enable code must have IRQs enabled so that it will not deadlock.
+ * --BLG
+ */
+
+int dev_queue_xmit(struct sk_buff *skb)
+{
+ struct net_device *dev = skb->dev;
+ struct Qdisc *q;
+ int rc = -ENOMEM;
+
+ if (skb_shinfo(skb)->frag_list &&
+ !(dev->features & NETIF_F_FRAGLIST) &&
+ __skb_linearize(skb, GFP_ATOMIC))
+ goto out_kfree_skb;
+
+ /* Fragmented skb is linearized if device does not support SG,
+ * or if at least one of fragments is in highmem and device
+ * does not support DMA from it.
+ */
+ if (skb_shinfo(skb)->nr_frags &&
+ (!(dev->features & NETIF_F_SG) || illegal_highdma(dev, skb)) &&
+ __skb_linearize(skb, GFP_ATOMIC))
+ goto out_kfree_skb;
+
+ /* If a checksum-deferred packet is forwarded to a device that needs a
+ * checksum, correct the pointers and force checksumming.
+ */
+ if (xen_checksum_setup(skb))
+ goto out_kfree_skb;
/* If packet is not checksummed and device does not support
* checksumming for this protocol, complete checksumming here.
@@ -3350,6 +3361,7 @@
EXPORT_SYMBOL(net_enable_timestamp);
EXPORT_SYMBOL(net_disable_timestamp);
EXPORT_SYMBOL(dev_get_flags);
+EXPORT_SYMBOL(xen_checksum_setup);
#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
EXPORT_SYMBOL(br_handle_frame_hook);
diff -r 57e6d7218427 -r 079135b0d58f patches/linux-2.6.16-rc2/net-csum.patch
--- a/patches/linux-2.6.16-rc2/net-csum.patch Fri Feb 3 18:45:14 2006
+++ b/patches/linux-2.6.16-rc2/net-csum.patch Mon Feb 6 19:34:52 2006
@@ -44,3 +44,27 @@
*portptr = newport;
return 1;
}
+--- linux-2.6.16-rc2-xen0/net/ipv4/xfrm4_output.c.orig 2006-02-03
22:36:32.000000000 -0600
++++ linux-2.6.16-rc2-xen0/net/ipv4/xfrm4_output.c 2006-02-03
22:41:39.000000000 -0600
+@@ -17,6 +17,8 @@
+ #include <net/xfrm.h>
+ #include <net/icmp.h>
+
++extern int xen_checksum_setup(struct sk_buff *skb);
++
+ /* Add encapsulation header.
+ *
+ * In transport mode, the IP header will be moved forward to make space
+@@ -102,7 +104,11 @@ static int xfrm4_output_one(struct sk_bu
+ struct dst_entry *dst = skb->dst;
+ struct xfrm_state *x = dst->xfrm;
+ int err;
+-
++
++ err = xen_checksum_setup(skb);
++ if (err)
++ goto error_nolock;
++
+ if (skb->ip_summed == CHECKSUM_HW) {
+ err = skb_checksum_help(skb, 0);
+ if (err)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |