|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 1a/3] Add Summagraphics Tablet emulation
This is a slightly modified version of the original Summagraphics patch
that includes the change to check for eager event handling in the
configure script.
Signed-off-by: Don Dugger <donald.d.dugger@xxxxxxxxx>
--
Don Dugger
"Censeo Toto nos in Kansa esse decisse." - D. Gale
Donald.D.Dugger@xxxxxxxxx
Ph: (303)440-1368
diff -r c445d4a0dd76 tools/ioemu/configure
--- a/tools/ioemu/configure Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/configure Thu Mar 16 14:15:55 2006 -0700
@@ -238,6 +238,29 @@ fi
fi
+if test "$vnc" = "yes" ; then
+
+# check for eager event handling
+cat > $TMPC <<EOF
+#include "rfb/rfb.h"
+int main(void) {
+ rfbScreenInfoPtr screen;
+
+ screen->handleEventsEagerly = 1;
+}
+EOF
+
+if $cc `libvncserver-config --cflags` -o $TMPO $TMPC 2> /dev/null ; then
+ have_eager_events="yes"
+else
+ echo "!!"
+ echo "!! Slow VNC mouse, LibVNCServer doesn't support eager events"
+ echo "!!"
+ have_eager_events="no"
+fi
+
+fi
+
##########################################
# SDL probe
@@ -472,6 +495,9 @@ if test "$vnc" = "yes"; then
vnc_cflags="/usr/include"
fi
echo "VNC_CFLAGS=$vnc_cflags" >> $config_mak
+ if test "$have_eager_events" = "yes" ; then
+ echo "#define VNC_EAGER_EVENTS 1" >> $config_h
+ fi
fi
if test "$sdl" = "yes"; then
diff -r c445d4a0dd76 tools/ioemu/hw/pckbd.c
--- a/tools/ioemu/hw/pckbd.c Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/hw/pckbd.c Thu Mar 16 14:15:55 2006 -0700
@@ -29,9 +29,6 @@
/* debug PC keyboard : only mouse */
//#define DEBUG_MOUSE
-/* enable synapatic touchpad device model */
-//#define SYNAPTIC
-
/* Keyboard Controller Commands */
#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
@@ -114,18 +111,27 @@
#define KBD_QUEUE_SIZE 256
+/*
+ * Summagraphics tablet defines
+ */
+#define SUMMA_BORDER 100
+#define SUMMA_MAXX (16000 - 1)
+#define SUMMA_MAXY (16000 - 1)
+
typedef struct {
uint8_t aux[KBD_QUEUE_SIZE];
uint8_t data[KBD_QUEUE_SIZE];
int rptr, wptr, count;
} KBDQueue;
-#ifdef SYNAPTIC
-typedef struct {
- int absolute;
- int high;
-} TouchPad;
-#endif
+/*
+ * Mouse types
+ */
+#define PS2 0
+#define IMPS2 3
+#define IMEX 4
+#define PAD 10
+#define TABLET 11
typedef struct KBDState {
KBDQueue queue;
@@ -143,16 +149,19 @@ typedef struct KBDState {
uint8_t mouse_wrap;
uint8_t mouse_type; /* 0 = PS2, 3 = IMPS/2, 4 = IMEX */
uint8_t mouse_detect_state;
+ int mouse_x; /* absolute coordinates (for mousepad) */
+ int mouse_y;
int mouse_dx; /* current values, needed for 'poll' mode */
int mouse_dy;
int mouse_dz;
uint8_t mouse_buttons;
-#ifdef SYNAPTIC
- TouchPad touchpad;
-#endif
+ CharDriverState *chr;
+ void *cookie;
} KBDState;
KBDState kbd_state;
+
+int summa_ok; /* Allow Summagraphics emulation if true */
/* update irq and KBD_STAT_[MOUSE_]OBF */
/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
@@ -398,7 +407,9 @@ static void kbd_write_keyboard(KBDState
}
}
-static void kbd_mouse_send_packet(KBDState *s)
+extern int mouse_maxx, mouse_maxy;
+
+static int kbd_mouse_send_packet(KBDState *s)
{
unsigned int b;
int dx1, dy1, dz1;
@@ -406,95 +417,73 @@ static void kbd_mouse_send_packet(KBDSta
dx1 = s->mouse_dx;
dy1 = s->mouse_dy;
dz1 = s->mouse_dz;
-#ifdef SYNAPTIC
- if (s->touchpad.absolute)
- {
- int dz2, dleftnright, dg, df;
- if (dx1 > 6143)
- dx1 = 6143;
- else if (dx1 < 0)
- dx1 = 0;
- if (dy1 > 6143)
- dy1 = 6143;
- else if (dy1 < 0)
- dy1 = 0;
- dz2 = 80; /* normal finger pressure */
- dg = 0; /* guesture not supported */
- df = 0; /* finger not supported */
- dleftnright = (s->mouse_buttons & 0x07);
- /*
- X: 13 bits --return absolute x ord
- Y: 13 bits --return absolute y ord
- Z: 8 bits --return constant 80 since we don't know how hard the user
- is pressing on the mouse button ;) 80 is the default for pen
- pressure, as touchpads cant sense what pressure a pen makes.
- W: 4 bits --return 0, we don't support finger width (should we?)
- left: 1 bit --is left button pressed
- right: 1 bit --is right button pressed
- guesture: 1 bit --we dont support, return 0
- finger: 1 bit --ditto
- total: 42 bits in 6 bytes
- note that Synaptics drivers ignore the finger and guesture bits and
- consider them redundant
- */
- /*
- note: the packet setup is different when Wmode = 1, but
- this doesn't apply since we don't support Wmode capability
- format of packet is as follows:
- */
- // 1 0 finger reserved 0 gesture right left
- kbd_queue(s, (0x80 | (df ? 0x20 : 0) | (dg ? 0x04 : 0) | dleftnright),
1);
- kbd_queue(s, ((dy1 & 0xF) * 256) + (dx1 & 0xF), 1);
- kbd_queue(s, 80, 1); //byte 3
- // 1 1 y-12 x-12 0 gesture right left
- kbd_queue(s, (0xC0 | ((dy1 & 1000) ? 0x20 : 0) | ((dx1 & 1000) ? 0x10 :
0) | (dg ? 0x04 : 0) | dleftnright), 1);
- kbd_queue(s, dx1 & 0xFF, 1);
- kbd_queue(s, dy1 & 0xFF, 1);
- return;
- }
-#endif
- /* XXX: increase range to 8 bits ? */
- if (dx1 > 127)
- dx1 = 127;
- else if (dx1 < -127)
- dx1 = -127;
- if (dy1 > 127)
- dy1 = 127;
- else if (dy1 < -127)
- dy1 = -127;
- b = 0x08 | ((dx1 < 0) << 4) | ((dy1 < 0) << 5) | (s->mouse_buttons & 0x07);
- kbd_queue(s, b, 1);
- kbd_queue(s, dx1 & 0xff, 1);
- kbd_queue(s, dy1 & 0xff, 1);
- /* extra byte for IMPS/2 or IMEX */
switch(s->mouse_type) {
- default:
- break;
- case 3:
- if (dz1 > 127)
- dz1 = 127;
- else if (dz1 < -127)
- dz1 = -127;
- kbd_queue(s, dz1 & 0xff, 1);
- break;
- case 4:
- if (dz1 > 7)
- dz1 = 7;
- else if (dz1 < -7)
- dz1 = -7;
- b = (dz1 & 0x0f) | ((s->mouse_buttons & 0x18) << 1);
- kbd_queue(s, b, 1);
- break;
- }
-
- /* update deltas */
- s->mouse_dx -= dx1;
- s->mouse_dy -= dy1;
- s->mouse_dz -= dz1;
+
+ case TABLET: /* Summagraphics pen tablet */
+ dx1 = s->mouse_x;
+ dy1 = s->mouse_y;
+ dx1 = ((dx1 * SUMMA_MAXX) / mouse_maxx) + SUMMA_BORDER;
+ dy1 = ((dy1 * SUMMA_MAXY) / mouse_maxy) + SUMMA_BORDER;
+ ser_queue(s->cookie, 0x80 | (s->mouse_buttons & 7));
+ ser_queue(s->cookie, dx1 & 0x7f);
+ ser_queue(s->cookie, dx1 >> 7);
+ ser_queue(s->cookie, dy1 & 0x7f);
+ ser_queue(s->cookie, dy1 >> 7);
+ s->mouse_dx = 0;
+ s->mouse_dy = 0;
+ s->mouse_dz = 0;
+ return 0;
+
+ default: /* PS/2 style mice */
+ /* XXX: increase range to 8 bits ? */
+ if (dx1 > 127)
+ dx1 = 127;
+ else if (dx1 < -127)
+ dx1 = -127;
+ if (dy1 > 127)
+ dy1 = 127;
+ else if (dy1 < -127)
+ dy1 = -127;
+ b = 0x08 | ((dx1 < 0) << 4) | ((dy1 < 0) << 5) | (s->mouse_buttons &
0x07);
+ kbd_queue(s, b, 1);
+ kbd_queue(s, dx1 & 0xff, 1);
+ kbd_queue(s, dy1 & 0xff, 1);
+ /* extra byte for IMPS/2 or IMEX */
+ switch(s->mouse_type) {
+
+ default:
+ break;
+
+ case IMPS2:
+ if (dz1 > 127)
+ dz1 = 127;
+ else if (dz1 < -127)
+ dz1 = -127;
+ kbd_queue(s, dz1 & 0xff, 1);
+ break;
+
+ case IMEX:
+ if (dz1 > 7)
+ dz1 = 7;
+ else if (dz1 < -7)
+ dz1 = -7;
+ b = (dz1 & 0x0f) | ((s->mouse_buttons & 0x18) << 1);
+ kbd_queue(s, b, 1);
+ break;
+ }
+
+ /* update deltas */
+ s->mouse_dx -= dx1;
+ s->mouse_dy -= dy1;
+ s->mouse_dz -= dz1;
+ return s->mouse_dx || s->mouse_dy || s->mouse_dz;
+
+ }
}
static void pc_kbd_mouse_event(void *opaque,
- int dx, int dy, int dz, int buttons_state)
+ int dx, int dy, int dz, int buttons_state,
+ int x, int y)
{
KBDState *s = opaque;
@@ -502,6 +491,8 @@ static void pc_kbd_mouse_event(void *opa
if (!(s->mouse_status & MOUSE_STATUS_ENABLED))
return;
+ s->mouse_x = x;
+ s->mouse_y = y;
s->mouse_dx += dx;
s->mouse_dy -= dy;
s->mouse_dz += dz;
@@ -513,23 +504,76 @@ static void pc_kbd_mouse_event(void *opa
if (!(s->mouse_status & MOUSE_STATUS_REMOTE) &&
(s->queue.count < (KBD_QUEUE_SIZE - 16))) {
- for(;;) {
- /* if not remote, send event. Multiple events are sent if
- too big deltas */
- kbd_mouse_send_packet(s);
- if (s->mouse_dx == 0 && s->mouse_dy == 0 && s->mouse_dz == 0)
- break;
- }
- }
+ while (kbd_mouse_send_packet(s))
+ ;
+ }
+}
+
+static void summa(KBDState *s, int val)
+{
+ static int summa = 0;
+
+ if (s->mouse_type == TABLET) {
+ switch (val) {
+
+ case '?': /* read firmware ID */
+ ser_queue(s->cookie, '0');
+ break;
+
+ case 'a': /* read config */
+ /*
+ * Config looks like a movement packet but, because of scaling
+ * issues we can't use `kbd_send_packet' to do this.
+ */
+ ser_queue(s->cookie, 0);
+ ser_queue(s->cookie, (SUMMA_MAXX & 0x7f));
+ ser_queue(s->cookie, (SUMMA_MAXX >> 7));
+ ser_queue(s->cookie, (SUMMA_MAXY & 0x7f));
+ ser_queue(s->cookie, (SUMMA_MAXY >> 7));
+ break;
+
+ default: /* ignore all others */
+ break;
+
+ }
+ return;
+ }
+ if (val == 'B') {
+ summa++;
+ return;
+ } else if (summa && val == 'z') {
+ s->mouse_type = TABLET;
+ return;
+ }
+ summa = 0;
+ return;
+}
+
+int summa_write(CharDriverState *chr, const uint8_t *buf, int len)
+{
+ KBDState *s = (KBDState *)chr->opaque;
+ int n;
+
+ n = len;
+ while (n-- > 0)
+ summa(s, *buf++);
+ return len;
+}
+
+void summa_init(void *cookie, CharDriverState *chr)
+{
+
+ if (summa_ok == 0)
+ return;
+ kbd_state.chr = chr;
+ kbd_state.cookie = (void *)cookie;
+ chr->chr_write = summa_write;
+ chr->opaque = (void *)&kbd_state;
+ return;
}
static void kbd_write_mouse(KBDState *s, int val)
{
-#ifdef SYNAPTIC
-/* variables needed to store synaptics command info */
-static int rr = 0, ss = 0, tt = 0, uu = 0, res_count = 0, last_com = 0;
-int spare;
-#endif
#ifdef DEBUG_MOUSE
printf("kbd: write mouse 0x%02x\n", val);
#endif
@@ -547,9 +591,6 @@ int spare;
return;
}
}
-#ifdef SYNAPTIC
- last_com = val;
-#endif
switch(val) {
case AUX_SET_SCALE11:
s->mouse_status &= ~MOUSE_STATUS_SCALE21;
@@ -581,121 +622,6 @@ int spare;
kbd_queue(s, AUX_ACK, 1);
break;
case AUX_GET_SCALE:
-#ifdef SYNAPTIC
- if (res_count == 4)
- {
- /* time for the special stuff */
- kbd_queue(s, AUX_ACK, 1);
- /* below is how we get the real synaptic command */
- val = (rr*64) + (ss*16) + (tt*4) + uu;
- switch(val)
- {
- /* id touchpad */
- case 0x00:
- /* info Minor */
- kbd_queue(s, 0x00, 1);
- /* special verification byte */
- kbd_queue(s, 0x47, 1);
- /* info Major * 0x10 + Info ModelCode*/
- kbd_queue(s, 4 * 0x10 + 0, 1);
- break;
- /* read touchpad modes */
- case 0x01:
- /* special verification byte */
- kbd_queue(s, 0x3B, 1);
- /* mode */
- /*
- bit 7 - absolute or relative position
- bit 6 - 0 for 40 packets/sec, 1 for 80
pack/sec
- bit 3 - 1 for sleep mode, 0 for normal
- bit 2 - 1 to detect tap/drag, 0 to
disable
- bit 1 - packet size, only valid for
serial protocol
- bit 0 - 0 for normal packets, 1 for
enhanced packets
- (absolute mode packets which have
finger width)
- */
- if (s->touchpad.absolute &&
s->touchpad.high)
- {
- spare = 0xC0;
- }
- else if (s->touchpad.absolute)
- {
- spare = 0x80;
- }
- else if (s->touchpad.high)
- {
- spare = 0x40;
- }
- else
- {
- spare = 0x00;
- }
- kbd_queue(s, spare, 1);
- /* special verification byte */
- kbd_queue(s, 0x47, 1);
- break;
- /* read touchpad capabilites */
- case 0x02:
- /* extended capability first 8 bits */
- kbd_queue(s, 0x00, 1);
- /* special verification byte */
- kbd_queue(s, 0x47, 1);
- /* extended capability last 8 bits */
- kbd_queue(s, 0x00, 1);
- /* basicly, we don't have any capabilites
;0 */
- break;
- /* read model id */
- case 0x03:
- /*
- bit 23 = 0 (1 for upsidedownpad)
- bit 22 = 0 (1 for 90 degree rotated pad)
- bits 21-16 = 1 (standard model)
- bits 15-9 = ??? (reserved for synaptics
use)
- bit 7 = 1
- bit 6 = 0 (1 for sensing pens)
- bit 5 = 1
- bits 3-0 = 1 (rectangular geometery)
- */
- kbd_queue(s, 0xFC, 1);
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0xF5, 1); //F7 for sensing pens
- break;
- /* read serial number prefix */
- case 0x06:
- /* strange how they have this query even
though
- no touchpad actually has serial numbers
*/
- /* return serial prefix of 0 if we dont
have one */
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- break;
- /* read serial number suffix */
- case 0x07:
- /* undefined if we dont have a valid serial
prefix */
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- break;
- /* read resolutions */
- case 0x08:
- /* going to go with infoSensor = 1
(Standard model) here */
- /* absolute X in abolute units per mm */
- kbd_queue(s, 85, 1);
- /* undefined but first bit 7 will be set to
1...
- hell I'm going to set them all to 1 */
- kbd_queue(s, 0xFF, 1);
- /* absolute Y in abolute units per mm */
- kbd_queue(s, 94, 1);
- break;
- default:
- /* invalid commands return undefined data */
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- kbd_queue(s, 0x00, 1);
- break;
- }
- }
- else
-#endif
{
/* not a special command, just do the regular stuff */
kbd_queue(s, AUX_ACK, 1);
@@ -720,18 +646,12 @@ int spare;
s->mouse_sample_rate = 100;
s->mouse_resolution = 2;
s->mouse_status = 0;
-#ifdef SYNAPTIC
- s->touchpad.absolute = 0;
-#endif
kbd_queue(s, AUX_ACK, 1);
break;
case AUX_RESET:
s->mouse_sample_rate = 100;
s->mouse_resolution = 2;
s->mouse_status = 0;
-#ifdef SYNAPTIC
- s->touchpad.absolute = 0;
-#endif
kbd_queue(s, AUX_ACK, 1);
kbd_queue(s, 0xaa, 1);
kbd_queue(s, s->mouse_type, 1);
@@ -741,15 +661,6 @@ int spare;
}
break;
case AUX_SET_SAMPLE:
-#ifdef SYNAPTIC
- if (res_count == 4 && val == 0x14)
- {
- /* time for the special stuff */
- /* below is how we get the real synaptic command */
- val = (rr*64) + (ss*16) + (tt*4) + uu;
- /* TODO: set the mode byte */
- } else
-#endif
s->mouse_sample_rate = val;
#if 0
/* detect IMPS/2 or IMEX */
@@ -769,12 +680,12 @@ int spare;
break;
case 2:
if (val == 80)
- s->mouse_type = 3; /* IMPS/2 */
+ s->mouse_type = IMPS2; /* IMPS/2 */
s->mouse_detect_state = 0;
break;
case 3:
if (val == 80)
- s->mouse_type = 4; /* IMEX */
+ s->mouse_type = IMEX; /* IMEX */
s->mouse_detect_state = 0;
break;
}
@@ -783,36 +694,6 @@ int spare;
s->mouse_write_cmd = -1;
break;
case AUX_SET_RES:
-#ifdef SYNAPTIC
- if (last_com != AUX_SET_RES)
- {
- /* if its not 4 in a row, its not a command */
- /* FIXME: if we are set 8 of these in a row, or 12, or 16,
- or etc ... or 4^n commands, then the nth'd mode byte sent
might
- still work. not sure if this is how things are suppose to be
- or not. */
- res_count = 0;
- }
- res_count++;
- if (res_count > 4) res_count = 4;
- switch(res_count)
- /* we need to save the val in the right spots to get the
- real command later */
- {
- case 1:
- break;
- rr = val;
- case 2:
- ss = val;
- break;
- case 3:
- tt = val;
- break;
- case 4:
- uu = val;
- break;
- }
-#endif
s->mouse_resolution = val;
kbd_queue(s, AUX_ACK, 1);
s->mouse_write_cmd = -1;
@@ -881,23 +762,19 @@ static void kbd_save(QEMUFile* f, void*
qemu_put_8s(f, &s->write_cmd);
qemu_put_8s(f, &s->status);
qemu_put_8s(f, &s->mode);
- qemu_put_be32s(f, &s->kbd_write_cmd);
- qemu_put_be32s(f, &s->scan_enabled);
- qemu_put_be32s(f, &s->mouse_write_cmd);
+ qemu_put_be32s(f, (uint32_t *)&s->kbd_write_cmd);
+ qemu_put_be32s(f, (uint32_t *)&s->scan_enabled);
+ qemu_put_be32s(f, (uint32_t *)&s->mouse_write_cmd);
qemu_put_8s(f, &s->mouse_status);
qemu_put_8s(f, &s->mouse_resolution);
qemu_put_8s(f, &s->mouse_sample_rate);
qemu_put_8s(f, &s->mouse_wrap);
qemu_put_8s(f, &s->mouse_type);
qemu_put_8s(f, &s->mouse_detect_state);
- qemu_put_be32s(f, &s->mouse_dx);
- qemu_put_be32s(f, &s->mouse_dy);
- qemu_put_be32s(f, &s->mouse_dz);
+ qemu_put_be32s(f, (uint32_t *)&s->mouse_dx);
+ qemu_put_be32s(f, (uint32_t *)&s->mouse_dy);
+ qemu_put_be32s(f, (uint32_t *)&s->mouse_dz);
qemu_put_8s(f, &s->mouse_buttons);
-#ifdef SYNAPTIC
- qemu_put_be32s(f, &s->touchpad.absolute);
- qemu_put_be32s(f, &s->touchpad.high);
-#endif
}
static int kbd_load(QEMUFile* f, void* opaque, int version_id)
@@ -909,23 +786,19 @@ static int kbd_load(QEMUFile* f, void* o
qemu_get_8s(f, &s->write_cmd);
qemu_get_8s(f, &s->status);
qemu_get_8s(f, &s->mode);
- qemu_get_be32s(f, &s->kbd_write_cmd);
- qemu_get_be32s(f, &s->scan_enabled);
- qemu_get_be32s(f, &s->mouse_write_cmd);
+ qemu_get_be32s(f, (uint32_t *)&s->kbd_write_cmd);
+ qemu_get_be32s(f, (uint32_t *)&s->scan_enabled);
+ qemu_get_be32s(f, (uint32_t *)&s->mouse_write_cmd);
qemu_get_8s(f, &s->mouse_status);
qemu_get_8s(f, &s->mouse_resolution);
qemu_get_8s(f, &s->mouse_sample_rate);
qemu_get_8s(f, &s->mouse_wrap);
qemu_get_8s(f, &s->mouse_type);
qemu_get_8s(f, &s->mouse_detect_state);
- qemu_get_be32s(f, &s->mouse_dx);
- qemu_get_be32s(f, &s->mouse_dy);
- qemu_get_be32s(f, &s->mouse_dz);
+ qemu_get_be32s(f, (uint32_t *)&s->mouse_dx);
+ qemu_get_be32s(f, (uint32_t *)&s->mouse_dy);
+ qemu_get_be32s(f, (uint32_t *)&s->mouse_dz);
qemu_get_8s(f, &s->mouse_buttons);
-#ifdef SYNAPTIC
- qemu_get_be32s(f, &s->touchpad.absolute);
- qemu_get_be32s(f, &s->touchpad.high);
-#endif
return 0;
}
@@ -933,6 +806,7 @@ void kbd_init(void)
{
KBDState *s = &kbd_state;
+ s->mouse_type = PS2;
kbd_reset(s);
register_savevm("pckbd", 0, 2, kbd_save, kbd_load, s);
register_ioport_read(0x60, 1, 1, kbd_read_data, s);
diff -r c445d4a0dd76 tools/ioemu/hw/serial.c
--- a/tools/ioemu/hw/serial.c Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/hw/serial.c Thu Mar 16 14:15:55 2006 -0700
@@ -70,6 +70,11 @@
#define UART_LSR_OE 0x02 /* Overrun error indicator */
#define UART_LSR_DR 0x01 /* Receiver data ready */
+/*
+ * Size of ring buffer for characters to send to host
+ */
+#define MAXCHRS 256
+
struct SerialState {
uint8_t divider;
uint8_t rbr; /* receive register */
@@ -84,11 +89,22 @@ struct SerialState {
it can be reset while reading iir */
int thr_ipending;
int irq;
+ struct cbuf {
+ uint8_t buf[MAXCHRS];
+ int in;
+ int out;
+ } cbuf;
CharDriverState *chr;
};
static void serial_update_irq(SerialState *s)
{
+ if ((s->lsr & UART_LSR_DR) == 0 && s->cbuf.in != s->cbuf.out) {
+ s->rbr = s->cbuf.buf[s->cbuf.out++];
+ if (s->cbuf.out >= MAXCHRS)
+ s->cbuf.out = 0;
+ s->lsr |= UART_LSR_DR;
+ }
if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) {
s->iir = UART_IIR_RDI;
} else if (s->thr_ipending && (s->ier & UART_IER_THRI)) {
@@ -220,6 +236,22 @@ static uint32_t serial_ioport_read(void
return ret;
}
+void ser_queue(SerialState *s, unsigned char c)
+{
+ int n;
+
+ n = s->cbuf.in - s->cbuf.out;
+ if (n < 0)
+ n += MAXCHRS;
+ if (n < (MAXCHRS - 1)) {
+ s->cbuf.buf[s->cbuf.in++] = c;
+ if (s->cbuf.in >= MAXCHRS)
+ s->cbuf.in = 0;
+ serial_update_irq(s);
+ }
+ return;
+}
+
static int serial_can_receive(SerialState *s)
{
return !(s->lsr & UART_LSR_DR);
@@ -227,6 +259,9 @@ static int serial_can_receive(SerialStat
static void serial_receive_byte(SerialState *s, int ch)
{
+#ifdef DEBUG_SERIAL
+ printf("serial: serial_receive_byte: ch=0x%02x\n", ch);
+#endif // DEBUG_SERIAL
s->rbr = ch;
s->lsr |= UART_LSR_DR;
serial_update_irq(s);
@@ -266,6 +301,8 @@ SerialState *serial_init(int base, int i
s = qemu_mallocz(sizeof(SerialState));
if (!s)
return NULL;
+ s->cbuf.in = 0;
+ s->cbuf.out = 0;
s->irq = irq;
s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
s->iir = UART_IIR_NO_INT;
@@ -273,6 +310,7 @@ SerialState *serial_init(int base, int i
register_ioport_write(base, 8, 1, serial_ioport_write, s);
register_ioport_read(base, 8, 1, serial_ioport_read, s);
s->chr = chr;
+ summa_init(s, chr);
qemu_chr_add_read_handler(chr, serial_can_receive1, serial_receive1, s);
qemu_chr_add_event_handler(chr, serial_event);
return s;
diff -r c445d4a0dd76 tools/ioemu/sdl.c
--- a/tools/ioemu/sdl.c Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/sdl.c Thu Mar 16 14:15:55 2006 -0700
@@ -405,7 +405,7 @@ static void sdl_send_mouse_event(void)
if (state & SDL_BUTTON(SDL_BUTTON_WHEELDOWN))
dz++;
#endif
- kbd_mouse_event(dx, dy, dz, buttons);
+ kbd_mouse_event(dx, dy, dz, buttons, 0, 0);
}
static void toggle_full_screen(DisplayState *ds)
diff -r c445d4a0dd76 tools/ioemu/vl.c
--- a/tools/ioemu/vl.c Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/vl.c Thu Mar 16 14:15:55 2006 -0700
@@ -464,11 +464,11 @@ void kbd_put_keycode(int keycode)
}
}
-void kbd_mouse_event(int dx, int dy, int dz, int buttons_state)
+void kbd_mouse_event(int dx, int dy, int dz, int buttons_state, int x, int y)
{
if (qemu_put_mouse_event) {
qemu_put_mouse_event(qemu_put_mouse_event_opaque,
- dx, dy, dz, buttons_state);
+ dx, dy, dz, buttons_state, x, y);
}
}
diff -r c445d4a0dd76 tools/ioemu/vl.h
--- a/tools/ioemu/vl.h Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/vl.h Thu Mar 16 14:15:55 2006 -0700
@@ -139,13 +139,13 @@ extern int graphic_depth;
#define MOUSE_EVENT_MBUTTON 0x04
typedef void QEMUPutKBDEvent(void *opaque, int keycode);
-typedef void QEMUPutMouseEvent(void *opaque, int dx, int dy, int dz, int
buttons_state);
+typedef void QEMUPutMouseEvent(void *opaque, int dx, int dy, int dz, int
buttons_state, int x, int y);
void qemu_add_kbd_event_handler(QEMUPutKBDEvent *func, void *opaque);
void qemu_add_mouse_event_handler(QEMUPutMouseEvent *func, void *opaque);
void kbd_put_keycode(int keycode);
-void kbd_mouse_event(int dx, int dy, int dz, int buttons_state);
+void kbd_mouse_event(int dx, int dy, int dz, int buttons_state, int x, int y);
/* keysym is a unicode code except for special keys (see QEMU_KEY_xxx
constants) */
@@ -618,6 +618,12 @@ extern const char* keyboard_layout;
extern const char* keyboard_layout;
extern int repeat_key;
+/* Mice */
+
+void summa_init(void *cookie, CharDriverState *chr);
+
+extern int summa_ok;
+
/* mc146818rtc.c */
typedef struct RTCState RTCState;
@@ -630,6 +636,7 @@ void rtc_set_date(RTCState *s, const str
typedef struct SerialState SerialState;
SerialState *serial_init(int base, int irq, CharDriverState *chr);
+void ser_queue(SerialState *s, unsigned char c);
/* i8259.c */
diff -r c445d4a0dd76 tools/ioemu/vnc.c
--- a/tools/ioemu/vnc.c Tue Mar 14 19:33:45 2006 +0100
+++ b/tools/ioemu/vnc.c Thu Mar 16 14:15:55 2006 -0700
@@ -46,8 +46,9 @@
#endif
static rfbScreenInfoPtr screen;
-static DisplayState* ds_sdl=0;
-static void* kbd_layout=0; // TODO: move into rfbClient
+static DisplayState* ds_sdl;
+static void* kbd_layout; // TODO: move into rfbClient
+static int ctl_keys; // Ctrl+Alt starts calibration
/* mouse stuff */
@@ -123,12 +124,16 @@ static rectangle_t last_update, before_u
static rectangle_t last_update, before_update;
static int updates_since_mouse=0;
+int mouse_maxx;
+int mouse_maxy;
static int mouse_x,mouse_y;
static int new_mouse_x,new_mouse_y,new_mouse_z,new_mouse_buttons;
-static void init_mouse(int initial_x,int initial_y) {
- mouse_x=new_mouse_x=initial_x;
- mouse_y=new_mouse_y=initial_y;
+static void init_mouse(int max_x,int max_y) {
+ mouse_maxx=max_x - 1;
+ mouse_maxy=max_y - 1;
+ mouse_x=new_mouse_x=max_x/2;
+ mouse_y=new_mouse_y=max_y/2;
new_mouse_z=new_mouse_buttons=0;
mouse_magic->calibration = 0;
}
@@ -137,6 +142,15 @@ static void mouse_refresh() {
int dx=0,dy=0,dz=new_mouse_z;
static int counter=1;
+ /*
+ * Simulate lifting the mouse by pressing left <ctl><alt> together
+ * e.g. don't send mouse events.
+ */
+ if (ctl_keys == 3) {
+ mouse_x = new_mouse_x;
+ mouse_y = new_mouse_y;
+ return;
+ }
counter++;
if(!mouse_magic->calibration && counter>=2) { counter=0; return; }
@@ -153,7 +167,7 @@ static void mouse_refresh() {
}
}
//fprintf(stderr,"sending mouse event %d,%d\n",dx,dy);
- kbd_mouse_event(dx,dy,dz,new_mouse_buttons);
+ kbd_mouse_event(dx,dy,dz,new_mouse_buttons,new_mouse_x,new_mouse_y);
mouse_x+=dx;
mouse_y+=dy;
@@ -237,7 +251,7 @@ static void mouse_calibration_refresh()
if(calibration_step==0) {
x=0; y=1;
- kbd_mouse_event(0,-1,0,0);
+ kbd_mouse_event(0,-1,0,0,x,y);
calibration_step++;
} else if(calibration_step==1) {
// find out the initial position of the cursor
@@ -269,7 +283,7 @@ static void mouse_calibration_refresh()
} else {
y++;
move_calibrate:
- kbd_mouse_event(-x,-y,0,0);
+ kbd_mouse_event(-x,-y,0,0,x,y);
before_update=last_update;
}
} else if(calibration_step==3) {
@@ -375,12 +389,11 @@ static void vnc_resize(DisplayState *ds,
fprintf(stderr,"Warning: mouse calibration interrupted by video
mode change\n");
stop_mouse_calibration();
}
- init_mouse(w/2,h/2);
+ init_mouse(w,h);
}
static void vnc_process_key(rfbBool down, rfbKeySym keySym, rfbClientPtr cl)
{
- static int magic=0; // Ctrl+Alt starts calibration
if(is_active_console(vga_console)) {
WORD keycode=keysym2scancode(kbd_layout, keySym);
@@ -416,24 +429,28 @@ static void vnc_process_key(rfbBool down
}
if(down) {
if(keySym==XK_Control_L)
- magic|=1;
+ ctl_keys|=1;
else if(keySym==XK_Alt_L)
- magic|=2;
+ ctl_keys|=2;
} else {
- if((magic&3)==3) {
+ if (keySym == XK_Control_L)
+ ctl_keys &= ~1;
+ else if (keySym == XK_Alt_L)
+ ctl_keys &= ~2;
+ if((ctl_keys&3)==3) {
switch(keySym) {
case XK_Control_L:
- magic&=~1;
+ ctl_keys&=~1;
break;
case XK_Alt_L:
- magic&=~2;
+ ctl_keys&=~2;
break;
case XK_m:
- magic=0;
+ ctl_keys=0;
start_mouse_calibration();
break;
case XK_1 ... XK_9:
- magic=0;
+ ctl_keys=0;
fprintf(stderr,"switch to
%d\n",keySym-XK_1);
console_select(keySym - XK_1);
if (is_active_console(vga_console)) {
@@ -483,7 +500,8 @@ void vnc_display_init(DisplayState *ds,
char host[1024];
char *p;
rfbClientPtr cl;
-
+
+ summa_ok = 1;
if(!keyboard_layout) {
fprintf(stderr, "No keyboard language specified\n");
exit(1);
@@ -513,6 +531,10 @@ void vnc_display_init(DisplayState *ds,
screen->serverFormat.redMax = 31;
screen->serverFormat.greenMax = 63;
screen->serverFormat.blueMax = 31;
+
+#ifdef VNC_EAGER_EVENTS
+ screen->handleEventsEagerly = TRUE;
+#endif // VNC_EAGER_EVENTS
if (port != 0)
screen->port = port;
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |