|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: [PATCH]: Various build clean-ups
Various build clean-ups
This is a fairly chunky patch to clean up the build a bit.
Please let me know if you would like any portions ommited, or broken out.
Also, I am left with two questions
1. Should buildconfigs/{mk.linux-2.6-xen0,mk.linux-2.6-xenU} be removed?
2. Should the NETBSD portions (of buildconfigs/Rules.mk) be removed?
Changes
-------
Python
* Make sure that DESTDIR is set, otherwise, if
XEN_PYTHON_NATIVE_INSTALL then python installs go into a relative
directory, rather then under the default prefix (usually /usr)
This is done by setting it if unset in Config.mk
.PHONY
* Move .PHONY directives next to targets, this makes them a lot easier
to miss
* Add missing .PHONY directives
Dependency installation targets
* Expand out install-iptables and install-logging into
build-, install-, dist-, clean- and distclean-
to make them consistent with other targets
* Call distclean-iptables and distclean-logging from distclean,
so distclean really cleans the tree, even if the logging or
iptables targets have been used
Iptables
* Upgrade iptables from 1.2.11 to 1.3.5, as the
former does not seem to compile with linux-2.6.16
* Update iptables download URL from http://www.netfilter.org/files to
http://www.netfilter.org/projects/iptables/files/
* Make iptables targets depend on prep-kernels,
as the kernel needs to be there for some components of iptables
It will still build without the kernel, however, the build
will differ depending on if prep-kernels had previously been
called or not
* Update domU kernel dir from linux-$(LINUX_VER)-xenU to linux-$(LINUX_VER)-xen
Documentation
* Tidy up output of make help
* Document the use of the XEN_PYTHON_NATIVE_INSTALL environment variable
Kernels
* Don't delete non-existent %.tar.bz2 in buildconfigs/Rules.mk's %-mrproper
* Add a mrpropper target to buildconfigs/mk.linux-2.6-xen, and
have this delete the local patch and tarball
* Make distclean depend on kclean, rather than calling clean target by hand
* Stop kclean from erroring out if the kernel directory doesn't exist
* Remove patches/*/.makedep in top level Makefile rather than in
buildconfigs/Rules.mk, as calling rules in the latter causes
patches/*/.make to be created
(Magnus)
Tar
* Use --bzip2 instead of -j with tar, as its backwards compatible
Download
* Allow LINUX_REPO, NETBSD_REPO, PYTHON_LOGGING_REPO and IPTABLES_REPO
to specify the URL of the repository for the linux kernel,
netbsd kernel, python logging package and iptables
- Defaults are:
LINUX_REPO http://www.kernel.org/pub/linux/kernel/
NETBSD_REPO http://www.cl.cam.ac.uk/Research/SRG/netos/xen/downloads
PYTHON_LOGGING_REPO http://www.red-dove.com
IPTABLES_REPO http://www.netfilter.org/projects/iptables/files
* Allow each of these variables to be overridden in the environment
* With the exception of LINUX_REPO, the URL should be the full
path to the tarball.
* For LINUX_REPO it should be the path, trimmed to give a structure
equivalent to http://www.kernel.org/pub/linux/kernel/
- The kernel tarball will be downloaded from
$(LINUX_REPO)/v$(KERNEL_MAJOR).$(KERNEL_MINOR)/
e.g. http://www.kernel.org/pub/linux/kernel/v2.6
Where KERNEL_MAJOR and KERNEL_MINOR are calculated at runtime
- The path of the tarball can be overridden using LINUX_REPO_KERNEL_PATH
in the environment, in which case the tarball will be downloaded from
$(LINUX_REPO)/v$(LINUX_REPO_KERNEL_PATH)/
- If needed kernel patches will be downloaded from
$(LINUX_REPO)/v$(KERNEL_MAJOR).$(KERNEL_MINOR)/snapshots
if present, else
$(LINUX_REPO)/v$(KERNEL_MAJOR).$(KERNEL_MINOR)/testing
This will depend on the version of the patch
- The path of the tarball can be overridden using LINUX_REPO_KERNEL_PATH
in the environment, in which case the patch will be downloaded from
$(LINUX_REPO)/v$(LINUX_REPO_PATCH_PATH)/
- The intention of LINUX_REPO_KERNEL_PATH and LINUX_REPO_PATCH_PATH
is to allow for sites that don't follow the directory hierarchy of
kernel.org, while simplifying the presumably common case where they do
* Previously KERNEL_REPO had similar properties to LINUX_REPO, but
it was not as flexible, had a somewhat presumptuous name and could
not be overridden in the environment. It has been removed
* Allow DOWNLOAD_PATH to set a search path for previously downloaded files
- Use the first element of the path as the directory to save
downloaded files
- Default is LINUX_SRC_PATH if set in environment, else .:..
- Note that kclean-tarball, makedistlcean-* and friends
intentionally only remove tarballs in the top level xen directory,
regardless of the value of this variable. This is to allow
more persistent storage of tarballs in a specified location,
which cam be manually cleaned if desired.
mkbuildtree
* Don't assume mkbuiltree scripts are executable
pygryb
* clean a.out
(Magnus)
Signed-Off-By: Horms <horms@xxxxxxxxxxxx>
Signed-Off-By: Magnus Damm <magnus@xxxxxxxxxxxxx>
Config.mk | 15 +
Makefile | 199 +++++++++++++++++++++----
buildconfigs/Rules.mk | 34 ++--
buildconfigs/mk.linux-2.6-xen | 18 +-
linux-2.6-xen-sparse/drivers/xen/Makefile | 26 +--
linux-2.6-xen-sparse/drivers/xen/core/Makefile | 21 ++
linux-2.6-xen-sparse/mkbuildtree | 8 -
tools/debugger/gdb/gdbbuild | 2
tools/misc/xen-clone | 2
tools/pygrub/Makefile | 2
10 files changed, 256 insertions(+), 71 deletions(-)
diff -r 40c23921e729 Config.mk
--- a/Config.mk Mon Mar 27 18:03:03 2006 +0100
+++ b/Config.mk Tue Mar 28 18:49:58 2006 +0900
@@ -24,6 +24,7 @@ OBJDUMP = $(CROSS_COMPILE)objdump
OBJDUMP = $(CROSS_COMPILE)objdump
DISTDIR ?= $(XEN_ROOT)/dist
+DESTDIR ?= /
INSTALL = install
INSTALL_DIR = $(INSTALL) -d -m0755
@@ -68,7 +69,19 @@ CFLAGS += $(foreach i, $(EXTRA_INCLUDES)
CFLAGS += $(foreach i, $(EXTRA_INCLUDES), -I$(i))
# Choose the best mirror to download linux kernel
-KERNEL_REPO = http://www.kernel.org
+DOWNLOAD_PATH_DEFAULT := .:..
+ifdef LINUX_SRC_PATH
+DOWNLOAD_PATH ?= $(LINUX_SRC_PATH) # Compatibility
+else
+DOWNLOAD_PATH ?= $(DOWNLOAD_PATH_DEFAULT)
+endif
+DOWNLOAD_DIR := $(firstword $(subst :, ,$(DOWNLOAD_PATH)))
+# LINUX_REPO_KERNEL_PATH Set in buildconfigs/Rules.mk, if not in environment
+# LINUX_REPO_PATCH_PATH Set in buildconfigs/Rules.mk, if not in environment
+LINUX_REPO ?= http://www.kernel.org/pub/linux/kernel/
+NETBSD_REPO ?= http://www.cl.cam.ac.uk/Research/SRG/netos/xen/downloads
+PYTHON_LOGGING_REPO ?= http://www.red-dove.com
+IPTABLES_REPO ?= http://www.netfilter.org/projects/iptables/files
# If ACM_SECURITY = y, then the access control module is compiled
# into Xen and the policy type can be set by the boot policy file
diff -r 40c23921e729 Makefile
--- a/Makefile Mon Mar 27 18:03:03 2006 +0100
+++ b/Makefile Tue Mar 28 18:49:58 2006 +0900
@@ -14,6 +14,7 @@ endif
endif
# Default target must appear before any include lines
+.PHONY: all
all: dist
XEN_ROOT=$(CURDIR)
@@ -24,12 +25,10 @@ export pae=y
export pae=y
endif
-.PHONY: all dist install xen kernels tools dev-docs docs world clean
-.PHONY: mkpatches mrproper kbuild kdelete kclean
-
# build and install everything into the standard system directories
install: install-xen install-kernels install-tools install-docs
+.PHONY: build
build: kernels
$(MAKE) -C xen build
$(MAKE) -C tools build
@@ -38,10 +37,12 @@ build: kernels
# The test target is for unit tests that can run without an installation. Of
# course, many tests require a machine running Xen itself, and these are
# handled elsewhere.
+.PHONY: test
test:
$(MAKE) -C tools/python test
# build and install everything into local dist directory
+.PHONY: dist
dist: DESTDIR=$(DISTDIR)/install
dist: dist-xen dist-kernels dist-tools dist-docs
$(INSTALL_DIR) $(DISTDIR)/check
@@ -54,79 +55,165 @@ dist-%: install-%
@: # do nothing
# Legacy dist targets
+.PHONY: xen tools kernels docs
xen: dist-xen
tools: dist-tools
kernels: dist-kernels
docs: dist-docs
+.PHONY: prep-kernels
prep-kernels:
for i in $(XKERNELS) ; do $(MAKE) $$i-prep || exit 1; done
+.PHONY: install-xen
install-xen:
$(MAKE) -C xen install
+.PHONY: install-tools
install-tools:
$(MAKE) -C tools install
+.PHONY: install-kernels
install-kernels:
for i in $(XKERNELS) ; do $(MAKE) $$i-install || exit 1; done
+.PHONY: install-docs
install-docs:
sh ./docs/check_pkgs && $(MAKE) -C docs install || true
+.PHONY: dev-docs
dev-docs:
$(MAKE) -C docs dev-docs
# Build all the various kernels and modules
+.PHONY: kbuild
kbuild: kernels
# Delete the kernel build trees entirely
+.PHONY: kdelete
kdelete:
for i in $(XKERNELS) ; do $(MAKE) $$i-delete ; done
# Clean the kernel build trees
+.PHONY: kclean
kclean:
for i in $(XKERNELS) ; do $(MAKE) $$i-clean ; done
# Make patches from kernel sparse trees
+.PHONY: mkpatches
mkpatches:
for i in $(ALLSPARSETREES) ; do $(MAKE) $$i-xen.patch; done
# build xen, the tools, and a domain 0 plus unprivileged linux-xen images,
# and place them in the install directory. 'make install' should then
# copy them to the normal system directories
+.PHONY: world
world:
$(MAKE) clean
$(MAKE) kdelete
$(MAKE) dist
# clean doesn't do a kclean
+.PHONY: clean
clean::
$(MAKE) -C xen clean
$(MAKE) -C tools clean
$(MAKE) -C docs clean
-# clean, but blow away kernel build tree plus tarballs
-distclean: clean
+# clean, but blow away kernel build tree plus tarballs in the xen source tree
+.PHONY: distclean
+distclean: clean kdelete distclean-logging distclean-iptables
rm -rf dist patches/tmp
- for i in $(ALLKERNELS) ; do $(MAKE) $$i-delete ; done
for i in $(ALLSPARSETREES) ; do $(MAKE) $$i-mrproper ; done
+ rm -rf patches/*/.makedep
# Linux name for GNU distclean
+.PHONY: mrproper
mrproper: distclean
-install-logging: LOGGING=logging-0.4.9.2
-install-logging:
- [ -f $(LOGGING).tar.gz ] || wget
http://www.red-dove.com/$(LOGGING).tar.gz
- tar -zxf $(LOGGING).tar.gz
- cd $(LOGGING) && python setup.py install
-
-# handy target to upgrade iptables (use rpm or apt-get in preference)
-install-iptables:
- wget http://www.netfilter.org/files/iptables-1.2.11.tar.bz2
- tar -jxf iptables-1.2.11.tar.bz2
- $(MAKE) -C iptables-1.2.11 PREFIX=
KERNEL_DIR=../linux-$(LINUX_VER)-xen0 install
-
+# handy targets to upgrade loging (use rpm or apt-get in preference)
+LOGGING=logging-0.4.9.2
+
+vpath $(LOGGING).tar.gz $(DOWNLOAD_PATH)
+$(LOGGING).tar.gz:
+ wget $(IPTABLES_REPO)/$@ -O$(DOWNLOAD_DIR)/$@ \
+ || { rm -f $(DOWNLOAD_DIR)/$@; false; }
+
+# N.B: Not .PHONY
+prep-stamp-logging:
+ [ -d $(LOGGING) ] || tar -zxf $<
+ touch $@
+
+.PHONY: prep-logging
+prep-logging: prep-stamp-logging
+
+.PHONY: build-logging
+build-logging: prep-logging
+ cd $(LOGGING) && python setup.py build
+
+.PHONY: install-logging
+install-logging: build-logging
+ifndef XEN_PYTHON_NATIVE_INSTALL
+ cd $(LOGGING) && python setup.py install --home="$(DESTDIR)/usr"
+else
+ cd $(LOGGING) && python setup.py install --root="$(DESTDIR)"
+endif
+
+.PHONY: dist-logging
+dist-logging: DESTDIR=$(DISTDIR)/install
+dist-logging: install-logging
+ @: # do nothing
+
+.PHONY: clean-logging
+clean-logging:
+ [ ! -d $(LOGGING) ] || ( cd $(LOGGING) && python setup.py clean; )
+
+.PHONY: distclean-logging
+distclean-logging: clean-logging
+ rm -f prep-stamp-logging $(LOGGING).tar.gz
+ rm -rf $(LOGGING)
+
+# handy targets to upgrade iptables (use rpm or apt-get in preference)
+IPTABLES=iptables-1.3.5
+
+vpath $(IPTABLES).tar.bz2 $(DOWNLOAD_PATH)
+$(IPTABLES).tar.bz2:
+ wget $(IPTABLES_REPO)/$@ -O$(DOWNLOAD_DIR)/$@ \
+ || { rm -f $(DOWNLOAD_DIR)/$@; false; }
+
+# N.B: Not .PHONY
+prep-stamp-iptables: $(IPTABLES).tar.bz2
+ [ -d $(IPTABLES) ] || tar --bzip2 -xf $<
+ touch $@
+
+.PHONY: prep-iptables
+prep-iptables: prep-stamp-iptables
+
+.PHONY: build-iptables
+build-iptables: prep-iptables prep-kernels
+ $(MAKE) -C $(IPTABLES) PREFIX= KERNEL_DIR=../linux-$(LINUX_VER)-xen
+
+.PHONY: install-iptables
+install-iptables: build-iptables
+ $(MAKE) -C $(IPTABLES) PREFIX= KERNEL_DIR=../linux-$(LINUX_VER)-xen \
+ install
+
+.PHONY: dist-iptables
+dist-iptables: DESTDIR=$(DISTDIR)/install
+dist-iptables: install-iptables
+ @: # do nothing
+
+.PHONY: clean-iptables
+clean-iptables:
+ [ ! -d $(IPTABLES) ] || $(MAKE) -C $(IPTABLES) PREFIX= \
+ KERNEL_DIR=../linux-$(LINUX_VER)-xen clean
+
+.PHONY: distclean-iptables
+distclean-iptables: clean-iptables
+ rm -f prep-stamp-iptables $(IPTABLES).tar.bz2
+ rm -rf $(IPTABLES)
+
+.PHONY: help
help:
@echo 'Installation targets:'
@echo ' install - build and install everything'
@@ -137,8 +224,8 @@ help:
@echo ''
@echo 'Building targets:'
@echo ' dist - build and install everything into local
dist directory'
- @echo ' world - clean everything, delete guest kernel build'
- @echo ' trees then make dist'
+ @echo ' world - clean everything, delete guest kernel build
trees'
+ @echo ' then make dist'
@echo ' xen - build and install Xen hypervisor'
@echo ' tools - build and install tools'
@echo ' kernels - build and install guest kernels'
@@ -147,25 +234,80 @@ help:
@echo ' dev-docs - build developer-only documentation'
@echo ''
@echo 'Cleaning targets:'
- @echo ' clean - clean the Xen, tools and docs (but not'
- @echo ' guest kernel) trees'
- @echo ' distclean - clean plus delete kernel tarballs and
kernel'
- @echo ' build trees'
+ @echo ' clean - clean the Xen, tools and docs (but not
guest kernel trees)'
+ @echo ' distclean - clean plus delete kernel build trees and'
+ @echo ' local downloaded files'
@echo ' kdelete - delete guest kernel build trees'
@echo ' kclean - clean guest kernel build trees'
@echo ''
- @echo 'Dependency installation targets:'
- @echo ' install-logging - install the Python Logging package'
+ @echo 'Dependency installation targets (Python Logging package):'
+ @echo ' build-logging - build logging'
+ @echo ' install-logging - install logging tools'
+ @echo ' dist-logging - install logging tools into local directory'
+ @echo ' clean-logging - clean logging'
+ @echo ' distclean-logging'
+ @echo ' - clean logging plus'
+ @echo ' delete logging tree and local tarball'
+ @echo ' * distclean-logging is called by distclean,'
+ @echo ' but other targets are indepenent of non-logging targets'
+ @echo ''
+ @echo 'Dependency installation targets (iptables):'
+ @echo ' build-iptables - build iptables'
@echo ' install-iptables - install iptables tools'
+ @echo ' dist-iptables - install iptables tools into local directory'
+ @echo ' clean-iptables - clean iptables'
+ @echo ' distclean-iptables'
+ @echo ' - clean iptables plus'
+ @echo ' delete iptables tree and local tarball'
+ @echo ' * distclean-iptables is called by distclean,'
+ @echo ' but other targets are indepenent of non-iptables targets'
@echo ''
@echo 'Miscellaneous targets:'
@echo ' prep-kernels - prepares kernel directories, does not build'
@echo ' mkpatches - make patches against vanilla kernels from'
@echo ' sparse trees'
- @echo ' uninstall - attempt to remove installed Xen tools (use'
- @echo ' with extreme care!)'
+ @echo ' uninstall - attempt to remove installed Xen tools'
+ @echo ' (use with extreme care!)'
+ @echo
+ @echo 'Environment:'
+ @echo ' XEN_PYTHON_NATIVE_INSTALL=y'
+ @echo ' - native python install or dist'
+ @echo ' install into prefix/lib/python<VERSION>'
+ @echo ' instead of <PREFIX>/lib/python'
+ @echo ' true if set to non-empty value, false
otherwise'
+ @echo ' LINUX_REPO=URL - Base URL to download linux kernel from'
+ @echo ' Default: $(LINUX_REPO)'
+ @echo ' LINUX_REPO_KERNEL_PATH=DIRECTORY'
+ @echo ' - LINUX_REPO assumes that the URL has the
same directory'
+ @echo ' structure as
http://www.kernel.org/pub/linux/kernel/'
+ @echo ' and the rest of the path to the tarball is
derived.'
+ @echo ' If set, override the derivation.'
+ @echo ' Default: $(LINUX_REPO)'
+ @echo ' LINUX_REPO_PATCHL_PATH=DIRECTORY'
+ @echo ' - LINUX_REPO assumes that the URL has the
same directory'
+ @echo ' structure as
http://www.kernel.org/pub/linux/kernel/'
+ @echo ' and the rest of the path to the patches is
derived.'
+ @echo ' If set, override the derivation.'
+ @echo ' Default: $(LINUX_REPO)'
+ @echo ' NETBSD_REPO=URL - Base URL to download netbsd kernel from'
+ @echo ' Default: $(NETBSD_REPO)'
+ @echo ' PYTHON_LOGGING_REPO=URL'
+ @echo ' - Base URL to download python loging package
from'
+ @echo ' Default: $(PYTHON_LOGGING_REPO)'
+ @echo ' IPTABLES_REPO=URL'
+ @echo ' - Base URL to download iptables from'
+ @echo ' Default: $(IPTABLES_REPO)'
+ @echo ' DOWNLOAD_PATH=PATH'
+ @echo ' - Directory to search for downloadable files'
+ @echo ' ":" delimited'
+ @echo ' First element will be used as the directory'
+ @echo ' to store any downloaded files in'
+ @echo ' Default: LINUX_SRC_PATH if set, else
$(DOWNLOAD_PATH_DEFAULT)'
+
+
# Use this target with extreme care!
+.PHONY: uninstall
uninstall: D=$(DESTDIR)
uninstall:
[ -d $(D)/etc/xen ] && mv -f $(D)/etc/xen $(D)/etc/xen.old-`date +%s`
|| true
@@ -199,5 +341,6 @@ uninstall:
rm -rf $(D)/usr/share/man/man8/xen*
# Legacy targets for compatibility
+.PHONY: linux26
linux26:
$(MAKE) 'KERNELS=linux-2.6*' kernels
diff -r 40c23921e729 buildconfigs/Rules.mk
--- a/buildconfigs/Rules.mk Mon Mar 27 18:03:03 2006 +0100
+++ b/buildconfigs/Rules.mk Tue Mar 28 18:49:58 2006 +0900
@@ -24,21 +24,28 @@ LINUX_VER ?= $(shell grep "^LINUX_VER" b
LINUX_VER ?= $(shell grep "^LINUX_VER" buildconfigs/mk.linux-2.6-xen |
sed -e 's/.*=[ ]*//')
# Setup Linux search path
-LINUX_SRC_PATH ?= .:..
-vpath linux-%.tar.bz2 $(LINUX_SRC_PATH)
-vpath patch-%.bz2 $(LINUX_SRC_PATH)
+vpath linux-%.tar.bz2 $(DOWNLOAD_PATH)
+vpath patch-%.bz2 $(DOWNLOAD_PATH)
# download a pristine Linux kernel tarball if there isn't one in LINUX_SRC_PATH
+ifndef LINUX_REPO_KERNEL_PATH
linux-%.tar.bz2: override _LINUX_VDIR = $(word 1,$(subst ., ,$*)).$(word
2,$(subst ., ,$*))
+linux-%.tar.bz2: LINUX_REPO_KERNEL_PATH = v$(_LINUX_VDIR)
+endif
linux-%.tar.bz2:
@echo "Cannot find $@ in path $(LINUX_SRC_PATH)"
- wget $(KERNEL_REPO)/pub/linux/kernel/v$(_LINUX_VDIR)/$@ -O./$@
+ wget $(LINUX_REPO)/$(LINUX_REPO_KERNEL_PATH)/$@ -O$(DOWNLOAD_DIR)/$@ \\
+ || { rm -f $(DOWNLOAD_DIR)/$@; false; }
+ifndef LINUX_REPO_PATCH_PATH
patch-%.bz2: override _LINUX_VDIR = $(word 1,$(subst ., ,$(*F))).$(word
2,$(subst ., ,$(*F)))
patch-%.bz2: override _LINUX_XDIR = $(if $(word 3,$(subst -,
,$(*F))),snapshots,testing)
+patch-%.bz2: LINUX_REPO_PATCH_PATH = v$(_LINUX_VDIR)/$(_LINUX_XDIR)
+endif
patch-%.bz2:
@echo "Cannot find $(@F) in path $(LINUX_SRC_PATH)"
- wget
$(KERNEL_REPO)/pub/linux/kernel/v$(_LINUX_VDIR)/$(_LINUX_XDIR)/$(@F) -O./$@
+ wget $(LINUX_REPO)/$(LINUX_REPO_PATCH_PATH)/$(@F) \
+ -O$(DOWNLOAD_DIR)/$@ || { rm -f $(DOWNLOAD_DIR)/$@; false; }
# Expand NetBSD release to NetBSD version
NETBSD_RELEASE ?= 2.0
@@ -52,7 +59,8 @@ vpath netbsd-%.tar.bz2 $(NETBSD_SRC_PATH
# download a pristine NetBSD tarball if there isn't one in NETBSD_SRC_PATH
netbsd-%-xen-kernel-$(NETBSD_CVSSNAP).tar.bz2:
@echo "Cannot find $@ in path $(NETBSD_SRC_PATH)"
- wget http://www.cl.cam.ac.uk/Research/SRG/netos/xen/downloads/$@ -O./$@
+ wget $(NETBSD_REPO)/$@ -O$(DOWNLOAD_DIR)/$@ || \
+ || { rm -f $(DOWNLOAD_DIR)/$@; false; }
netbsd-%.tar.bz2: netbsd-%-xen-kernel-$(NETBSD_CVSSNAP).tar.bz2
ln -fs $< $@
@@ -67,9 +75,10 @@ pristine-%: pristine-%/.valid-pristine
@true
pristine-%/.valid-pristine: %.tar.bz2
+ @ echo pristing-target: $@
rm -rf tmp-pristine-$* $(@D)
mkdir -p tmp-pristine-$*
- tar -C tmp-pristine-$* -jxf $<
+ tar -C tmp-pristine-$* --bzip2 -xf $<
-@rm -f tmp-pristine-$*/pax_global_header
mv tmp-pristine-$*/* $(@D)
@rm -rf tmp-pristine-$*
@@ -83,9 +92,6 @@ ifneq ($(PATCHDIRS),)
$(patsubst patches/%,patches/%/.makedep,$(PATCHDIRS)): patches/%/.makedep:
@echo 'ref-$*/.valid-ref: $$(wildcard patches/$*/*.patch)' >$@
-
-clean::
- rm -f patches/*/.makedep
ref-%/.valid-ref: pristine-%/.valid-pristine
set -e
@@ -113,6 +119,7 @@ endif
%-delete:
$(MAKE) -f buildconfigs/mk.$* delete
+ rm -f %
%-clean:
$(MAKE) -f buildconfigs/mk.$* clean
@@ -123,19 +130,20 @@ linux-2.6-xen.patch: ref-linux-$(LINUX_V
linux-2.6-xen.patch: ref-linux-$(LINUX_VER)/.valid-ref
rm -rf tmp-$@
cp -al $(<D) tmp-$@
- ( cd linux-2.6-xen-sparse && ./mkbuildtree ../tmp-$@ )
+ ( cd linux-2.6-xen-sparse && sh ./mkbuildtree ../tmp-$@ )
diff -Nurp $(<D) tmp-$@ > $@ || true
rm -rf tmp-$@
%-xen.patch: ref-%/.valid-ref
rm -rf tmp-$@
cp -al $(<D) tmp-$@
- ( cd $*-xen-sparse && ./mkbuildtree ../tmp-$@ )
+ ( cd $*-xen-sparse && sh ./mkbuildtree ../tmp-$@ )
diff -Nurp $(<D) tmp-$@ > $@ || true
rm -rf tmp-$@
%-mrproper: %-mrproper-extra
- rm -rf pristine-$(*)* ref-$(*)* $*.tar.bz2
+ $(MAKE) -f buildconfigs/mk.$*-xen mrpropper
+ rm -rf pristine-$(*)* ref-$(*)*
rm -rf $*-xen.patch
netbsd-%-mrproper-extra:
diff -r 40c23921e729 buildconfigs/mk.linux-2.6-xen
--- a/buildconfigs/mk.linux-2.6-xen Mon Mar 27 18:03:03 2006 +0100
+++ b/buildconfigs/mk.linux-2.6-xen Tue Mar 28 18:49:58 2006 +0900
@@ -11,9 +11,8 @@ LINUX_DIR = $(OS)-$(LINUX_VER)-$(EXTR
include buildconfigs/Rules.mk
-.PHONY: build clean delete
-
# The real action starts here!
+.PHONY: build
build: $(LINUX_DIR)/include/linux/autoconf.h
if grep "^CONFIG_MODULES=" $(LINUX_DIR)/.config ; then \
$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) modules ; \
@@ -26,8 +25,8 @@ build: $(LINUX_DIR)/include/linux/autoco
rm -rf $(LINUX_DIR)
cp -al $(<D) $(LINUX_DIR)
# Apply arch-xen patches
- ( cd linux-$(LINUX_SERIES)-xen-sparse ; \
- LINUX_ARCH=$(LINUX_ARCH) ./mkbuildtree ../$(LINUX_DIR) )
+ ( cd linux-$(LINUX_SERIES)-xen-sparse && \
+ LINUX_ARCH=$(LINUX_ARCH) sh ./mkbuildtree ../$(LINUX_DIR) )
# Re-use config from install dir if one exits else use default config
CONFIG_VERSION=$$(sed -ne 's/^EXTRAVERSION = //p'
$(LINUX_DIR)/Makefile); \
[ -r
$(DESTDIR)/boot/config-$(LINUX_VER)$$CONFIG_VERSION-$(EXTRAVERSION) ] && \
@@ -42,14 +41,23 @@ build: $(LINUX_DIR)/include/linux/autoco
rm -f Makefile ; mv Mk.tmp Makefile )
$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) oldconfig
+.PHONY: prep
prep: $(LINUX_DIR)/include/linux/autoconf.h
+.PHONY: config
config: CONFIGMODE = menuconfig
config: $(LINUX_DIR)/include/linux/autoconf.h
$(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) $(CONFIGMODE)
+.PHONY: clean
clean::
- $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) clean
+ [ ! -d $(LINUX_DIR) ] || \
+ $(MAKE) -C $(LINUX_DIR) ARCH=$(LINUX_ARCH) clean
+.PHONY: delete
delete:
rm -rf tmp-$(OS)-$(LINUX_VER) $(LINUX_DIR)
+
+.PHONY: mrpropper
+mrpropper:
+ rm -f $(LINUX_SRCS)
diff -r 40c23921e729 linux-2.6-xen-sparse/drivers/xen/Makefile
--- a/linux-2.6-xen-sparse/drivers/xen/Makefile Mon Mar 27 18:03:03 2006 +0100
+++ b/linux-2.6-xen-sparse/drivers/xen/Makefile Tue Mar 28 18:49:58 2006 +0900
@@ -1,22 +1,20 @@
-obj-y += net_driver_util.o
-obj-y += util.o
+obj-y += util.o
obj-y += core/
-obj-y += char/
obj-y += console/
obj-y += evtchn/
-obj-y += balloon/
+#obj-y += balloon/
obj-y += privcmd/
+obj-y += blkback/
+#obj-y += netback/
+obj-y += blkfront/
obj-y += xenbus/
+#obj-y += netfront/
+#obj-$(CONFIG_XEN_PRIVILEGED_GUEST) += privcmd/
+#obj-$(CONFIG_XEN_BLKDEV_BACKEND) += blkback/
+#obj-$(CONFIG_XEN_NETDEV_BACKEND) += netback/
+#obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += blkfront/
+#obj-$(CONFIG_XEN_NETDEV_FRONTEND) += netfront/
+#obj-$(CONFIG_XEN_BLKDEV_TAP) += blktap/
-obj-$(CONFIG_XEN_BLKDEV_BACKEND) += blkback/
-obj-$(CONFIG_XEN_NETDEV_BACKEND) += netback/
-obj-$(CONFIG_XEN_TPMDEV_BACKEND) += tpmback/
-obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += blkfront/
-obj-$(CONFIG_XEN_NETDEV_FRONTEND) += netfront/
-obj-$(CONFIG_XEN_BLKDEV_TAP) += blktap/
-obj-$(CONFIG_XEN_TPMDEV_FRONTEND) += tpmfront/
-obj-$(CONFIG_XEN_PCIDEV_BACKEND) += pciback/
-obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += pcifront/
-
diff -r 40c23921e729 linux-2.6-xen-sparse/drivers/xen/core/Makefile
--- a/linux-2.6-xen-sparse/drivers/xen/core/Makefile Mon Mar 27 18:03:03
2006 +0100
+++ b/linux-2.6-xen-sparse/drivers/xen/core/Makefile Tue Mar 28 18:49:58
2006 +0900
@@ -2,10 +2,25 @@
# Makefile for the linux kernel.
#
-obj-y := evtchn.o reboot.o gnttab.o features.o
+XENARCH := $(subst ",,$(CONFIG_XENARCH))
+CPPFLAGS_vmlinux.lds += -U$(XENARCH)
+
+$(obj)/vmlinux.lds.S:
+ @ln -fsn $(srctree)/arch/$(XENARCH)/kernel/vmlinux.lds.S $@
+
+
+obj-y := gnttab.o
obj-$(CONFIG_PROC_FS) += xen_proc.o
-obj-$(CONFIG_NET) += skbuff.o
-obj-$(CONFIG_SMP) += smpboot.o
+
+ifeq ($(ARCH),ia64)
+obj-y += evtchn_ia64.o
+obj-y += xenia64_init.o
+else
+extra-y += vmlinux.lds
+obj-y += reboot.o evtchn.o fixup.o
+obj-$(CONFIG_SMP) += smp.o # setup_profiling_timer def'd in ia64
+obj-$(CONFIG_NET) += skbuff.o # until networking is up on ia64
+endif
obj-$(CONFIG_SYSFS) += hypervisor_sysfs.o
obj-$(CONFIG_XEN_SYSFS) += xen_sysfs.o
diff -r 40c23921e729 linux-2.6-xen-sparse/mkbuildtree
--- a/linux-2.6-xen-sparse/mkbuildtree Mon Mar 27 18:03:03 2006 +0100
+++ b/linux-2.6-xen-sparse/mkbuildtree Tue Mar 28 18:49:58 2006 +0900
@@ -90,8 +90,8 @@ RS=$DESTPATH
RS=$DESTPATH
# Arch-specific pre-processing
-if [ -x arch/${LINUX_ARCH}/xen-mkbuildtree-pre ]; then
- arch/${LINUX_ARCH}/xen-mkbuildtree-pre
+if [ -e arch/${LINUX_ARCH}/xen-mkbuildtree-pre ]; then
+ sh arch/${LINUX_ARCH}/xen-mkbuildtree-pre
fi
# Remove old copies of files and directories at the destination
@@ -115,6 +115,6 @@ relative_lndir ../../../${RS}/../xen/inc
# Arch-specific post-processing
cd ${AD}
-if [ -x arch/${LINUX_ARCH}/xen-mkbuildtree-post ]; then
- arch/${LINUX_ARCH}/xen-mkbuildtree-post
+if [ -e arch/${LINUX_ARCH}/xen-mkbuildtree-post ]; then
+ sh arch/${LINUX_ARCH}/xen-mkbuildtree-post
fi
diff -r 40c23921e729 tools/debugger/gdb/gdbbuild
--- a/tools/debugger/gdb/gdbbuild Mon Mar 27 18:03:03 2006 +0100
+++ b/tools/debugger/gdb/gdbbuild Tue Mar 28 18:49:58 2006 +0900
@@ -7,7 +7,7 @@ tar xjf gdb-6.2.1.tar.bz2
tar xjf gdb-6.2.1.tar.bz2
cd gdb-6.2.1-xen-sparse
-./mkbuildtree ../gdb-6.2.1
+sh ./mkbuildtree ../gdb-6.2.1
cd ..
mkdir gdb-6.2.1-linux-i386-xen
diff -r 40c23921e729 tools/misc/xen-clone
--- a/tools/misc/xen-clone Mon Mar 27 18:03:03 2006 +0100
+++ b/tools/misc/xen-clone Tue Mar 28 18:49:58 2006 +0900
@@ -113,7 +113,7 @@ else
# Turn linux into xenolinux then build it
cd xenolinux-${LINUX_VER}-sparse
- ./mkbuildtree ../../linux-${LINUX_VER}
+ sh ./mkbuildtree ../../linux-${LINUX_VER}
cd ../..
mv linux-${LINUX_VER} xenolinux-${LINUX_VER}
cd xenolinux-${LINUX_VER}
diff -r 40c23921e729 tools/pygrub/Makefile
--- a/tools/pygrub/Makefile Mon Mar 27 18:03:03 2006 +0100
+++ b/tools/pygrub/Makefile Tue Mar 28 18:49:58 2006 +0900
@@ -15,4 +15,4 @@ endif
endif
clean:
- rm -rf build tmp *.pyc *.pyo *.o *.a *~
+ rm -rf build tmp *.pyc *.pyo *.o *.a *~ a.out
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |