Re: [Xen-devel] xen test results on Unisys ES7000

[David F Barrera <dfbp@xxxxxxxxxx>]

Susan,

I retested with changeset 10710, and the test completed successfully. 
Also, we made a change to our automation scripts, so it is likely that 
my problem was due to that. At any rate, xm-test is running normally 
with changeset 10710.  Thanks.
David

Krysan, Susan wrote:
> Hi David,
> We have not run yet with that changeset.  We usually do our weekly build
> on Mondays, but we are starting a build tonight with changeset 10711 on
> our ES7000/one and on a Dell and we will run xm-test on Monday.  We are
> migrating to a new ES7000 system next week, so it is possible we do not
> get to complete xm-test on that platform on Monday, but we will
> certainly have results from the Dell.  
>
> I'll let you know our results.
>
> Thanks,
> Sue Krysan
> Linux Systems Group
> Unisys Corporation
>  
>
> -----Original Message-----
> From: David F Barrera [mailto:dfbp@xxxxxxxxxx] 
> Sent: Friday, July 14, 2006 1:03 PM
> To: Krysan, Susan
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-devel] xen test results on Unisys ES7000
>
> Susan,
>
> Are you having any problems completing xm-test with changeset:   10680 
> :f692a0a476c5? I am seeing xm-test not complete, the last test appears 
> to be 07_destroy_stale_pos.
> David
>
> Krysan, Susan wrote:
>   
> > July 12, 2006
> >
> > Configuration:
> >
> > Unisys ES7000/one
> > x86_64
> > 32 physical processors 
> > 48 GB RAM
> > SLES10 RC3 with xen-unstable changeset  10648
> >
> > Issues: None (enforce_dom0_cpus actually passed - output shows number
> >     
> of cpus dropping with each /proc/cpuinfo check, but the 20 second wait
> loop in xm-test was just a second or two too short)
>   
> > Xm-test execution summary:
> >   PASS:  106
> >   FAIL:  6
> >   XPASS: 0
> >   XFAIL: 3
> >
> > Details:
> >
> >  FAIL: 01_enforce_dom0_cpus_basic_pos
> >          /proc/cpuinfo says xend didn't enforce dom0_cpus (2 != 1)
> >
> > XFAIL: 02_network_local_ping_pos
> >          ping loopback failed for size 65507. ping eth0 failed for
> >     
> size 65507.
>   
> > XFAIL: 05_network_dom0_ping_pos
> >          Ping to dom0 failed for size 65507.
> >
> > XFAIL: 11_network_domU_ping_pos
> >          Ping failed for size 1 48 64 512 1440 1500 1505 4096 4192
> >     
> 32767 65507.
>   
> >  FAIL: 12_network_domU_tcp_pos
> >          TCP hping2 failed for size 16384 24567 32767 65495.
> >
> >  FAIL: 13_network_domU_udp_pos
> >          UDP hping2 failed for size 32767 65495.
> >
> >   
> >     
> > > Thanks,
> > > Sue Krysan
> > > Linux Systems Group
> > > Unisys Corporation
> > >
> > >
> > >     
> > >       
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
> >   
> >     
>
>   
--

Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
                                                     Euripides 


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel