[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[XenPPC] [PATCH 1/3][TOOLS][XM-TEST] Update all block tests to use the Xen Virtual Block Device (xvd) rather than IDE or SCSI



Update all block tests to use the Xen Virtual Block Device (xvd) rather than 
IDE or SCSI.

This patch also modifies
09_block_attach_and_dettach_device_check_data_pos.py to force / to be
read-write otherwise the mkdir fails.

Also Whistspace cleanups.

Signed-off-by: Tony Breeds <tony@xxxxxxxxxxxxxxxxxx>
---

tools/xm-test/tests/block-create/01_block_attach_device_pos.py                  
      |   10 +-
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py             
      |    8 -
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py       
      |   16 +--
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
 |   18 ++--
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py               
      |    8 -
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py               
      |   14 +--
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py          
      |   16 +--
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
 |   44 +++++-----
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py    
      |   30 +++---
tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py                 
      |    2 
tools/xm-test/tests/block-create/12_block_attach_shared_domU.py                 
      |    2 
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py               
      |    8 -
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py               
      |    8 -
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py           
      |    2 
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py                
      |    8 -
tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py            
      |   10 +-
tools/xm-test/tests/block-integrity/01_block_device_read_verify.py              
      |    4 
tools/xm-test/tests/block-integrity/02_block_device_write_verify.py             
      |    4 
tools/xm-test/tests/block-list/01_block-list_pos.py                             
      |    6 -
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py                    
      |    6 -
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py                   
      |   10 +-
tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py                 
      |   24 ++---
22 files changed, 128 insertions(+), 130 deletions(-)

--- a/tools/xm-test/tests/block-create/01_block_attach_device_pos.py    Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/01_block_attach_device_pos.py    Thu Oct 
26 18:57:46 2006 +1000
@@ -32,12 +32,12 @@ except ConsoleError, e:
     FAIL(str(e))
     
 
-block_attach(domain, "phy:ram1", "sdb1")
+block_attach(domain, "phy:ram1", "xvda1")
 
-try:   
-       run = console.runCmd("cat /proc/partitions")
+try:
+    run = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
-       FAIL(str(e))
+    FAIL(str(e))
 
 # Close the console
 domain.closeConsole()
@@ -45,5 +45,5 @@ domain.closeConsole()
 # Stop the domain (nice shutdown)
 domain.stop()
 
-if not re.search("sdb1",run["output"]):
+if not re.search("xvda1",run["output"]):
     FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
--- a/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py       
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py       
Thu Oct 26 18:57:46 2006 +1000
@@ -32,10 +32,10 @@ except ConsoleError, e:
     FAIL(str(e))
     
 
-block_attach(domain, "file:/dev/ram1", "sdb2")
+block_attach(domain, "file:/dev/ram1", "xvda1")
 
 try:
-       run = console.runCmd("cat /proc/partitions")
+    run = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
         FAIL(str(e))
 
@@ -45,5 +45,5 @@ domain.closeConsole()
 # Stop the domain (nice shutdown)
 domain.stop()
 
-if not re.search("sdb2",run["output"]):
-       FAIL("Device is not actually connected to the domU")
+if not re.search("xvda1",run["output"]):
+    FAIL("Device is not actually connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
--- a/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py 
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py 
Thu Oct 26 18:57:46 2006 +1000
@@ -30,14 +30,14 @@ except ConsoleError, e:
     FAIL(str(e))
     
 for i in range(10):
-       status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" % 
domain.getName())
-        if i == 0 and status != 0:
-            FAIL("xm block attach returned invalid %i != 0" % status)
-       if i > 0 and status == 0:
-            FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
-       run = console.runCmd("cat /proc/partitions")
-       if not re.search("sdb1", run['output']):
-            FAIL("Device is not actually attached to domU")
+    status, output = traceCommand("xm block-attach %s phy:ram1 xvda1 w" % 
domain.getName())
+    if i == 0 and status != 0:
+        FAIL("xm block attach returned invalid %i != 0" % status)
+    if i > 0 and status == 0:
+        FAIL("xm block-attach (repeat) returned invalid %i > 0" % status)
+    run = console.runCmd("cat /proc/partitions")
+    if not re.search("xvda1", run['output']):
+        FAIL("Device is not actually attached to domU")
 
 # Close the console
 domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
--- 
a/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
     Thu Oct 26 18:56:14 2006 +1000
+++ 
b/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
     Thu Oct 26 18:57:46 2006 +1000
@@ -32,15 +32,15 @@ except ConsoleError, e:
     
 
 for i in range(10):
-       block_attach(domain, "phy:ram1", "sdb1")
-       run = console.runCmd("cat /proc/partitions")
-       if not re.search("sdb1", run["output"]):
-               FAIL("Failed to attach block device: /proc/partitions does not 
show that!")
-               
-       block_detach(domain, "sdb1")
-       run = console.runCmd("cat /proc/partitions")
-       if re.search("sdb1", run["output"]):
-               FAIL("Failed to dettach block device: /proc/partitions still 
showing that!")
+    block_attach(domain, "phy:ram1", "xvda1")
+    run = console.runCmd("cat /proc/partitions")
+    if not re.search("xvda1", run["output"]):
+        FAIL("Failed to attach block device: /proc/partitions does not show 
that!")
+
+    block_detach(domain, "xvda1")
+    run = console.runCmd("cat /proc/partitions")
+    if re.search("xvda1", run["output"]):
+        FAIL("Failed to dettach block device: /proc/partitions still showing 
that!")
 
 # Close the console
 domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py
--- a/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Thu Oct 
26 18:57:46 2006 +1000
@@ -8,13 +8,11 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-attach not supported for HVM domains")
 
-status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 sdb1 w")
+status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 xvda1 w")
 
 eyecatcher = "Error"
 where = output.find(eyecatcher)
 if status == 0:
-       FAIL("xm block-attach returned bad status, expected non 0, status is: 
%i" % status )
+    FAIL("xm block-attach returned bad status, expected non 0, status is: %i" 
% status )
 elif where == -1:
-       FAIL("xm block-attach returned bad output, expected Error, output is: 
%s" % output )
-       
-
+    FAIL("xm block-attach returned bad output, expected Error, output is: %s" 
% output )
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py
--- a/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Thu Oct 
26 18:57:46 2006 +1000
@@ -30,18 +30,18 @@ except ConsoleError, e:
     FAIL(str(e))
     
 
-status, output = traceCommand("xm block-attach %s phy:NOT-EXIST sdb1 w" % 
domain.getName())
+status, output = traceCommand("xm block-attach %s phy:NOT-EXIST xvda1 w" % 
domain.getName())
 eyecatcher = "Error"
 where = output.find(eyecatcher)
 if status == 0:
-       FAIL("xm block-attach returned bad status, expected non 0, status is: 
%i" % status )
+    FAIL("xm block-attach returned bad status, expected non 0, status is: %i" 
% status )
 elif where == -1:
-       FAIL("xm block-attach returned bad output, expected Error, output is: 
%s" % output )
+    FAIL("xm block-attach returned bad output, expected Error, output is: %s" 
% output )
 
 try:
-       run = console.runCmd("cat /proc/partitions")
+    run = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
-       FAIL(str(e))
+    FAIL(str(e))
 
 # Close the console
 domain.closeConsole()
@@ -49,5 +49,5 @@ domain.closeConsole()
 # Stop the domain (nice shutdown)
 domain.stop()
 
-if re.search("sdb1",run["output"]):
-       FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+    FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
--- a/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py    
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py    
Thu Oct 26 18:57:46 2006 +1000
@@ -29,18 +29,18 @@ except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
 
-status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST sdb1 w" 
% domain.getName())
+status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST xvda1 w" 
% domain.getName())
 eyecatcher = "Error"
 where = output.find(eyecatcher)
 if status == 0:
-       FAIL("xm block-attach returned bad status, expected non 0, status is: 
%i" % status )
+    FAIL("xm block-attach returned bad status, expected non 0, status is: %i" 
% status )
 elif where == -1:
-       FAIL("xm block-attach returned bad output, expected Error, output is: 
%s" % output )
-       
+    FAIL("xm block-attach returned bad output, expected Error, output is: %s" 
% output )
+    
 try:
-       run = console.runCmd("cat /proc/partitions")
+    run = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
-       FAIL(str(e))
+    FAIL(str(e))
 
 # Close the console
 domain.closeConsole()
@@ -48,5 +48,5 @@ domain.closeConsole()
 # Stop the domain (nice shutdown)
 domain.stop()
 
-if re.search("sdb1",run["output"]):
-       FAIL("Non existent Device was connected to the domU")
+if re.search("xvda1",run["output"]):
+    FAIL("Non existent Device was connected to the domU")
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
--- 
a/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
     Thu Oct 26 18:56:14 2006 +1000
+++ 
b/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
     Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ if ENABLE_HVM_SUPPORT:
     SKIP("Block-attach not supported for HVM domains")
 
 # Create a domain (default XmTestDomain, with our ramdisk)
-domain = XmTestDomain()
+domain = XmTestDomain(extraConfig={"extra":"rw"})
 
 try:
     console = domain.start()
@@ -35,27 +35,27 @@ if s != 0:
     FAIL("mke2fs returned %i != 0" % s)
 
 for i in range(10):
-       block_attach(domain, "phy:ram1", "hda1")
-       run = console.runCmd("cat /proc/partitions")
-       if not re.search("hda1", run["output"]):
-               FAIL("Failed to attach block device: /proc/partitions does not 
show that!")
-       
-       console.runCmd("mkdir -p /mnt/hda1; mount /dev/hda1 /mnt/hda1")
-       
-       if i:
-               run = console.runCmd("cat /mnt/hda1/myfile | grep %s" % (i-1))
-               if run['return']:
-                       FAIL("File created was lost or not updated!")
-       
-       console.runCmd("echo \"%s\" > /mnt/hda1/myfile" % i)
-       run = console.runCmd("cat /mnt/hda1/myfile")
-       print run['output']
-       console.runCmd("umount /mnt/hda1")
-       
-       block_detach(domain, "hda1")
-       run = console.runCmd("cat /proc/partitions")
-       if re.search("hda1", run["output"]):
-               FAIL("Failed to dettach block device: /proc/partitions still 
showing that!")
+    block_attach(domain, "phy:ram1", "xvda1")
+    run = console.runCmd("cat /proc/partitions")
+    if not re.search("xvda1", run["output"]):
+        FAIL("Failed to attach block device: /proc/partitions does not show 
that!")
+    
+    console.runCmd("mkdir -p /mnt/xvda1; mount /dev/xvda1 /mnt/xvda1")
+    
+    if i:
+        run = console.runCmd("cat /mnt/xvda1/myfile | grep %s" % (i-1))
+        if run['return']:
+            FAIL("File created was lost or not updated!")
+    
+    console.runCmd("echo \"%s\" > /mnt/xvda1/myfile" % i)
+    run = console.runCmd("cat /mnt/xvda1/myfile")
+    print run['output']
+    console.runCmd("umount /mnt/xvda1")
+    
+    block_detach(domain, "xvda1")
+    run = console.runCmd("cat /proc/partitions")
+    if re.search("xvda1", run["output"]):
+        FAIL("Failed to dettach block device: /proc/partitions still showing 
that!")
 
 # Close the console
 domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
--- 
a/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py  
    Thu Oct 26 18:56:14 2006 +1000
+++ 
b/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py  
    Thu Oct 26 18:57:46 2006 +1000
@@ -15,7 +15,7 @@ def availableRamdisks():
 def availableRamdisks():
     i = 0
     while os.access("/dev/ram%d" % i, os.F_OK ):
-       i += 1
+        i += 1
 
     return i
 
@@ -36,7 +36,7 @@ def detach(devname):
         return -2, "Failed to detach block device: /proc/partitions still 
showing that!"
 
     return 0, None
-       
+    
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-attach not supported for HVM domains")
 
@@ -69,22 +69,22 @@ while i < ramdisks or devices:
     op = random.randint(0,1) # 1 = attach, 0 = detach
     if (not devices or op) and i < ramdisks:
         i += 1
-       devname = "/dev/hda%d" % i
-       phy = "/dev/ram%d" % i
-       print "Attaching %s to %s" % (devname, phy)
-       status, msg = attach( phy, devname )
-       if status:
-           FAIL(msg)
-       else:
-           devices.append(devname)
+    devname = "/dev/xvda%d" % i
+    phy = "/dev/ram%d" % i
+    print "Attaching %s to %s" % (devname, phy)
+    status, msg = attach( phy, devname )
+    if status:
+        FAIL(msg)
+    else:
+        devices.append(devname)
 
     elif devices:
         devname = random.choice(devices)
-       devices.remove(devname)
-       print "Detaching %s" % devname
-       status, msg = detach(devname)
-       if status:
-           FAIL(msg)
+    devices.remove(devname)
+    print "Detaching %s" % devname
+    status, msg = detach(devname)
+    if status:
+        FAIL(msg)
 
 # Close the console
 domain.closeConsole()
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py
--- a/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py   Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/11_block_attach_shared_dom0.py   Thu Oct 
26 18:57:46 2006 +1000
@@ -24,7 +24,7 @@ if s != 0:
 
 # Now try to start a DomU with write access to /dev/ram0
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 
 domain = XmTestDomain(extraConfig=config);
 
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-create/12_block_attach_shared_domU.py
--- a/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py   Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-create/12_block_attach_shared_domU.py   Thu Oct 
26 18:57:46 2006 +1000
@@ -8,7 +8,7 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-attach not supported for HVM domains")
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 
 dom1 = XmTestDomain(extraConfig=config)
 dom2 = XmTestDomain(dom1.getName() + "-2",
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py
--- a/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Thu Oct 
26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-detach not supported for HVM domains")
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 domain = XmTestDomain(extraConfig=config)
 
 try:
@@ -21,7 +21,7 @@ except DomainError, e:
 
 try:
     console.setHistorySaveCmds(value=True)
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
     run2 = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
     FAIL(str(e))
@@ -29,10 +29,10 @@ if run["return"] != 0:
 if run["return"] != 0:
     FAIL("block device isn't attached; can't detach!")
 
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
 try:
 
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py
--- a/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Thu Oct 
26 18:57:46 2006 +1000
@@ -18,9 +18,9 @@ except DomainError, e:
         print e.extra
     FAIL("Unable to create domain")
 
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
@@ -28,9 +28,9 @@ if run["return"] != 0:
 if run["return"] != 0:
     FAIL("Failed to verify that block dev is attached")
 
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
--- a/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py     
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py     
Thu Oct 26 18:57:46 2006 +1000
@@ -19,7 +19,7 @@ except DomainError, e:
         print e.extra
     FAIL("Unable to create domain")
 
-status, output = traceCommand("xm block-detach %s sda1" % domain.getId())
+status, output = traceCommand("xm block-detach %s xvda1" % domain.getId())
 
 eyecatcher1 = "Error:"
 eyecatcher2 = "Traceback"
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py
--- a/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py  Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py  Thu Oct 
26 18:57:46 2006 +1000
@@ -9,7 +9,7 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-detach not supported for HVM domains")
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 domain = XmTestDomain(extraConfig=config)
 
 try:
@@ -20,7 +20,7 @@ except DomainError, e:
     FAIL("Unable to create domain")
 
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
     run2 = console.runCmd("cat /proc/partitions")
 except ConsoleError, e:
     FAIL(str(e))
@@ -28,10 +28,10 @@ if run["return"] != 0:
 if run["return"] != 0:
     FAIL("block device isn't attached; can't detach!")
 
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
 try:
 
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py
--- a/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py      
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-destroy/06_block-destroy_check_list_pos.py      
Thu Oct 26 18:57:46 2006 +1000
@@ -12,7 +12,7 @@ def checkXmLongList(domain):
     s, o = traceCommand("xm list --long %s" % domain.getName())
     if s != 0:
         FAIL("xm list --long <dom> failed")
-    if re.search("hda1", o):
+    if re.search("xvda1", o):
         return True
     else:
         return False
@@ -27,12 +27,12 @@ except DomainError,e:
 except DomainError,e:
     FAIL(str(e))
 
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
 
 if not checkXmLongList(domain):
-    FAIL("xm long list does not show that hda1 was attached")
+    FAIL("xm long list does not show that xvda1 was attached")
 
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
 
 if checkXmLongList(domain):
-    FAIL("xm long list does not show that hda1 was removed")
+    FAIL("xm long list does not show that xvda1 was removed")
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-integrity/01_block_device_read_verify.py
--- a/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py        
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/01_block_device_read_verify.py        
Thu Oct 26 18:57:46 2006 +1000
@@ -33,10 +33,10 @@ s, o = traceCommand("md5sum /dev/ram1")
 
 dom0_md5sum_match = re.search(r"^[\dA-Fa-f]{32}", o, re.M)
 
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
 
 try:
-    run = console.runCmd("md5sum /dev/hda1")
+    run = console.runCmd("md5sum /dev/xvda1")
 except ConsoleError, e:
     FAIL(str(e))
 
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-integrity/02_block_device_write_verify.py
--- a/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py       
Thu Oct 26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-integrity/02_block_device_write_verify.py       
Thu Oct 26 18:57:46 2006 +1000
@@ -28,12 +28,12 @@ except DomainError, e:
 
 console.setHistorySaveCmds(value=True)
 
-block_attach(domain, "phy:ram1", "hda1")
+block_attach(domain, "phy:ram1", "xvda1")
 
 console.setTimeout(120)
 
 try:
-    run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat 
/sys/block/hda1/size` | tee /dev/hda1 | md5sum")
+    run = console.runCmd("dd if=/dev/urandom bs=512 count=`cat 
/sys/block/xvda1/size` | tee /dev/xvda1 | md5sum")
 except ConsoleError, e:
     FAIL(str(e))
 
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-list/01_block-list_pos.py
--- a/tools/xm-test/tests/block-list/01_block-list_pos.py       Thu Oct 26 
18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/01_block-list_pos.py       Thu Oct 26 
18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-list not supported for HVM domains")
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 domain = XmTestDomain(extraConfig=config)
 
 try:
@@ -22,7 +22,7 @@ except DomainError, e:
     FAIL("Unable to create domain")
 
 status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
 where = output.find(eyecatcher)
 if status != 0:
     FAIL("xm block-list returned bad status, expected 0, status is %i" % 
status)
@@ -31,7 +31,7 @@ elif where < 0:
 
 #Verify the block device on DomainU
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py
--- a/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py      Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py      Thu Oct 
26 18:57:46 2006 +1000
@@ -22,11 +22,11 @@ except DomainError, e:
     FAIL("Unable to create domain")
 
 #Attach one virtual block device to domainU
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
 
 #Verify block-list on Domain0
 status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher = "769"
+eyecatcher = "51713"
 where = output.find(eyecatcher)
 if status != 0:
     FAIL("xm block-list returned bad status, expected 0, status is %i" % 
status)
@@ -35,7 +35,7 @@ elif where < 0 :
 
 #Verify attached block device on DomainU
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1")
+    run = console.runCmd("cat /proc/partitions | grep xvda1")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py
--- a/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py     Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py     Thu Oct 
26 18:57:46 2006 +1000
@@ -11,7 +11,7 @@ if ENABLE_HVM_SUPPORT:
 if ENABLE_HVM_SUPPORT:
     SKIP("Block-list not supported for HVM domains")
 
-config = {"disk":"phy:/dev/ram0,hda1,w"}
+config = {"disk":"phy:/dev/ram0,xvda1,w"}
 domain = XmTestDomain(extraConfig=config)
 
 try:
@@ -26,14 +26,14 @@ if status != 0:
     FAIL("Fail to list block device")
 
 #Add another virtual block device to the domain
-status, output = traceCommand("xm block-attach %s phy:/dev/ram1 hda2 w" % 
domain.getId())
+status, output = traceCommand("xm block-attach %s phy:/dev/ram1 xvda2 w" % 
domain.getId())
 if status != 0:
     FAIL("Fail to attach block device")
 
 #Verify block-list on Domain0
 status, output = traceCommand("xm block-list %s" % domain.getId())
-eyecatcher1 = "769"
-eyecatcher2 = "770"
+eyecatcher1 = "51713"
+eyecatcher2 = "51714"
 where1 = output.find(eyecatcher1)
 where2 = output.find(eyecatcher2)
 if status != 0:
@@ -43,7 +43,7 @@ elif (where1 < 0) and (where2 < 0):
 
 #Verify attached block device on DomainU
 try:
-    run = console.runCmd("cat /proc/partitions | grep hda1;cat 
/proc/partitions | grep hda2")
+    run = console.runCmd("cat /proc/partitions | grep xvda1;cat 
/proc/partitions | grep xvda2")
 except ConsoleError, e:
     saveLog(console.getHistory())
     FAIL(str(e))
diff -r 6186ec41fc18 -r 4b13f1fdba2d 
tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py
--- a/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py   Thu Oct 
26 18:56:14 2006 +1000
+++ b/tools/xm-test/tests/block-list/06_block-list_checkremove_pos.py   Thu Oct 
26 18:57:46 2006 +1000
@@ -22,39 +22,39 @@ if o:
 if o:
     FAIL("block-list without devices reported something!")
 
-block_attach(domain, "phy:/dev/ram0", "hda1")
+block_attach(domain, "phy:/dev/ram0", "xvda1")
 
 s, o = traceCommand("xm block-list %s" % domain.getName())
 if s != 0:
     FAIL("block-list failed")
-if o.find("769") == -1:
+if o.find("51713") == -1:
     FAIL("block-list didn't show the block device I just attached!")
 
-block_attach(domain, "phy:/dev/ram1", "hda2")
+block_attach(domain, "phy:/dev/ram1", "xvda2")
 
 s, o = traceCommand("xm block-list %s" % domain.getName())
 if s != 0:
     FAIL("block-list failed")
-if o.find("770") == -1:
+if o.find("51714") == -1:
     FAIL("block-list didn't show the other block device I just attached!")
 
-block_detach(domain, "hda1")
+block_detach(domain, "xvda1")
 
 s, o = traceCommand("xm block-list %s" % domain.getName())
 if s != 0:
     FAIL("block-list failed after detaching a device")
-if o.find("769") != -1:
-    FAIL("hda1 still shown in block-list after detach!")
-if o.find("770") == -1:
-    FAIL("hda2 not shown after detach of hda1!")
+if o.find("51713") != -1:
+    FAIL("xvda1 still shown in block-list after detach!")
+if o.find("51714") == -1:
+    FAIL("xvda2 not shown after detach of xvda1!")
 
-block_detach(domain, "hda2")
+block_detach(domain, "xvda2")
 
 s, o = traceCommand("xm block-list %s" % domain.getName())
 if s != 0:
     FAIL("block-list failed after detaching another device")
-if o.find("770") != -1:
-    FAIL("hda2 still shown in block-list after detach!")
+if o.find("51714") != -1:
+    FAIL("xvda2 still shown in block-list after detach!")
 if o:
     FAIL("block-list still shows something after all devices detached!")
     



_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ppc-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.