[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] HVM guest with file backed disks using loop devices ?



On Tue, Nov 21, 2006 at 02:02:13PM +0000, Daniel P. Berrange wrote:

> 
> I've been looking at an issue with HVM guests and file backed virtual disks.
> A user reported that they were unable to create more than 8 HVM guests as
> the hotplug scripts failed to find a free loop device on the 9th guest.
> 
> Ignoring the option of increasing max available loop devices in kernel, I'm
> confused as to why  HVM guests need to allocate loopback devices at all.
> The QEMU device model is perfectly happy access plain files directly - it
> has no need for them to be bound to a loop device. Indeed if I look at an
> active HVM guest, there is nothing using the loop device at all:
> 
>   # grep disk /etc/xen/demo 
>   disk = [ "file:/xen/demo.img,hda,w", "file:/root/boot.iso,hdc:cdrom,r" ]
>   # ps -axuwf | grep loop
>   root     18631  0.0  0.0      0     0 ?        S<   13:32   0:00 [loop0]
>   root     18673  0.0  0.0      0     0 ?        S<   13:32   0:00 [loop1]
> 
>   # lsof /dev/loop0
>   # lsof /dev/loop1
>   # lsof /root/boot.iso
>   COMMAND   PID USER   FD   TYPE DEVICE    SIZE    NODE NAME
>   qemu-dm 18551 root    6u   REG  253,0 6711296 1933665 /root/boot.iso
>   # lsof /xen/demo.img
>   COMMAND   PID USER   FD   TYPE DEVICE       SIZE    NODE NAME
>   qemu-dm 18551 root    5u   REG  253,0 4294967297 1277954 /xen/demo.img
> 
> So qemu-dm has the two raw files open & nothing is using the loop devices. 
> 
> 
> The loop devices are getting created for the HVM guest by the hotplug scripts,
> in particular /etc/xen/scripts/block.  This script simply looks at the block
> device type - either  phy:  or file:  and takes action accordingly - for the
> latter it will always create a loop device. There does not appear to be any
> logic in the hotplug script to check whether the guest is paravirt or HVM.
> 
> If I hack the 'block' hotplug script to rip out creation of the loopback 
> device
> for file:  disks, then HVM guests can still be created & appear to be able to
> access their virtual disks without problems (obviously this isn't an actual
> solution since it breaks paravirt file: disks).
> 
> I can think of two reasons for the creation of loop devices for HVM:
> 
>  - This was needed in the past, but is now obsolete & we simply forgot to
>    turn off loop device code for HVM 
>  - This is an accidental consequence changing the way HVM disks are
>    configured (ie when we droppped  :ioemu tag from disks).
> 
> Can anyone who is more familiar with the history of HVM development shed
> some light on this behaviour ?

It's there to support paravirtual drivers within HVM domains.  In that case,
you will be using blkback, just as with PV domains, and so you need the
backend there.

> I'd like to update the hotplug scripts to stop the loopback device being
> created for HVM, but don't see any obvious data available in the hotplug
> scripts which would allow me to distinguish between paravirt & HVM disk
> configurations.

The best thing would be to add a device option and a corresponding node in the
store that told blkback "this device is not for you, don't bring it up".  That
way, you don't pay the cost of the device backend and the loop device, in the
case where you are using QEMU-emulated devices, and not using the PV drivers.

The flag has to be this way around for compatibility -- old configurations
will be expecting the backend to be created unconditionally, to support the PV
drivers.

Ewan.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.