[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Xen-devel] timer_interrupt problem
- To: "Keir Fraser" <Keir.Fraser@xxxxxxxxxxxx>, <xen-devel@xxxxxxxxxxxxxxxxxxx>
- From: "Guy Zana" <guy@xxxxxxxxxxxx>
- Date: Sun, 28 Jan 2007 09:27:17 -0500
- Delivery-date: Sun, 28 Jan 2007 06:28:12 -0800
- List-id: Xen developer discussion <xen-devel.lists.xensource.com>
- Thread-index: AcdC4fWj7eohfwvQSgOdRxMCGnEg1QAAoRZCAABYLCA=
- Thread-topic: [Xen-devel] timer_interrupt problem
Yep. It's a Dual Core T60 (VT is
enabled).
The APIC error is really after dom0 starts to run, the
error appears after the message about relinquishing the
console.
The problems didn't appear in changeset 13090 of the
unstable tree (non PAE mode).
1. Can it be related to PAE?
(hard to see how)
2. Can I use the old kernel
(2.6.16.33) with changeset 13568? I didn't have much problems with that
version of the kernel, although I don't want to mess with
inconsistencies...
Should I check the latest changeset?
Guy.
Is it a dual core T60? The APIC errors are concerning
? that particular error (illegal vector) is most often a sign of bad hardware.
If it?s a UP laptop then you might try booting with ?nolapic noapic nosmp? as
a set of extra Xen boot parameters. If it?s SMP then the APIC errors are
harder to explain away.
Do you know when during boot the APIC errors
appear (e.g., before or after dom0 starts to run)?
--
Keir
On 28/1/07 1:41 pm, "Guy Zana" <guy@xxxxxxxxxxxx>
wrote:
Hello, I compiled
Xen unstable changeset 13568 (PAE) and encountered some problems.
Test
machine: IBM ThinkPad T60, latest BIOS, running FC6.
1. xm dmesg
shows the following errors:
* APIC error on CPU0: 00(40)
* APIC error
on CPU0: 00(40)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
