|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
As Requested Xen version 3.1.0-53.1.4.el5 (mockbuild@) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) Fri Nov 30 00:37:12 EST 2007 Latest ChangeSet: unavailable (XEN) Command line: /xen.gz-2.6.18-53.1.4.el5 (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f400 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000affe0000 (usable) (XEN) 00000000affe0000 - 00000000affe3000 (ACPI NVS) (XEN) 00000000affe3000 - 00000000afff0000 (ACPI data) (XEN) 00000000afff0000 - 00000000b0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) System RAM: 2815MB (2883068kB) (XEN) Xen heap: 13MB (14184kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 15:3 APIC version 16 (XEN) Processor #1 15:3 APIC version 16 (XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2593.611 MHz processor. (XEN) AMD SVM: ASIDs disabled. (XEN) HVM: SVM enabled (XEN) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 (XEN) Mapping cpu 0 to node 255 (XEN) Booting processor 1/1 eip 90000 (XEN) Not responding. (XEN) Inquiring remote APIC #1... (XEN) ... APIC #1 ID: 01000000 (XEN) ... APIC #1 VERSION: 80050010 (XEN) ... APIC #1 SPIV: 000000ff (XEN) Unmapping cpu 1 from all nodes (XEN) CPU #1 not responding - cannot use it. (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 1 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2c3c58 (XEN) elf_parse_binary: phdr: paddr=0xffffffff804c3c80 memsz=0x113270 (XEN) elf_parse_binary: phdr: paddr=0xffffffff805d7000 memsz=0xc08 (XEN) elf_parse_binary: phdr: paddr=0xffffffff805d8000 memsz=0x10af04 (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff806e2f04 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000 (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff806e2f04 (XEN) virt_entry = 0xffffffff80200000 (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff806e2f04 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000000aa000000->00000000ac000000 (666192 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff806e2f04 (XEN) Init. ramdisk: ffffffff806e3000->ffffffff80e63200 (XEN) Phys-Mach map: ffffffff80e64000->ffffffff81389280 (XEN) Start info: ffffffff8138a000->ffffffff8138a49c (XEN) Page tables: ffffffff8138b000->ffffffff8139a000 (XEN) Boot stack: ffffffff8139a000->ffffffff8139b000 (XEN) TOTAL: ffffffff80000000->ffffffff81800000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 1 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804c3c58 (XEN) elf_load_binary: phdr 1 at 0xffffffff804c3c80 -> 0xffffffff805d6ef0 (XEN) elf_load_binary: phdr 2 at 0xffffffff805d7000 -> 0xffffffff805d7c08 (XEN) elf_load_binary: phdr 3 at 0xffffffff805d8000 -> 0xffffffff80611388 (XEN) Initrd len 0x780200, start at 0xffffffff806e3000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to Xen). ---------------------------- Linux version 2.6.18-53.1.4.el5 (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 30 00:45:55 EST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000affe0000 (usable) BIOS-e820: 00000000affe0000 - 00000000affe3000 (ACPI NVS) BIOS-e820: 00000000affe3000 - 00000000afff0000 (ACPI data) BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.5 present. ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0 ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe3000 ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe3080 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000affe7cc0 ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @ 0x00000000affe7f80 ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @ 0x00000000affe7fc0 ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe8140 ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe7c40 ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 00000000affe0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-00000000affe0000 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump On node 0 totalpages: 709663 DMA zone: 2694 pages, LIFO batch:0 DMA32 zone: 706969 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8300 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at b4000000 (gap: b0000000:30000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 709663 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ 78a2000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2829052k/2883456k available (2434k kernel code, 54016k reserved, 1235k data, 192k init) Calibrating delay using timer specific routine.. 5339.01 BogoMIPS (lpj=2669506) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12471455 Detected 12.471 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5187.01 BogoMIPS (lpj=2593508) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 617 cycles) Brought up 2 CPUs testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer. time.c: Detected 2594.059 MHz processor. sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes migration_cost=435 checking if image is initramfs... it is Freeing initrd memory: 3109k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 0:18 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz PCI-DMA: Disabling IOMMU. pnp: 00:01: ioport range 0x4100-0x411f has been reserved pnp: 00:01: ioport range 0x228-0x22f has been reserved pnp: 00:01: ioport range 0x40b-0x40b has been reserved pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:01: ioport range 0xc00-0xc01 has been reserved pnp: 00:01: ioport range 0xc14-0xc14 has been reserved pnp: 00:01: ioport range 0xc50-0xc52 has been reserved pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0 PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fdd00000-fdefffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:07.0 IO window: e000-efff MEM window: fdc00000-fdcfffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:14.4 IO window: c000-cfff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1198060862.578:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key BF23BF4D1917253 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (46 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SB600_PATA: IDE controller at PCI slot 0000:00:14.1 GSI 16 sharing vector 0xB9 and IRQ 16 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185 SB600_PATA: chipset revision 0 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.10.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 192k freed Write protecting the kernel read-only data: 468k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 185 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 185, io mem 0xfe02e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 17 sharing vector 0xC1 and IRQ 17 ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 193 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 193, io mem 0xfe02d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 18 sharing vector 0xC9 and IRQ 18 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 201 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 201, io mem 0xfe02c000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 193 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 193, io mem 0xfe02b000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 201 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 201, io mem 0xfe02a000 usb 2-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input0 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected GSI 19 sharing vector 0xD1 and IRQ 19 ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 209 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 209, io mem 0xfe029000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:12.0: version 2.2 GSI 20 sharing vector 0xD9 and IRQ 20 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 217 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using ohci_hcd and address 4 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000028100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 217 ata2: SATA max UDMA/133 cmd 0xffffc20000028180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 217 ata3: SATA max UDMA/133 cmd 0xffffc20000028200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 217 ata4: SATA max UDMA/133 cmd 0xffffc20000028280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 217 usb 2-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 usb 2-2: new low speed USB device using ohci_hcd and address 5 usb 2-2: configuration #1 chosen from 1 choice input: Chicony USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:13.1-2 input: Chicony USB Keyboard as /class/input/input3 input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:13.1-2 ohci_hcd 0000:00:13.2: wakeup ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000AAJS-22YFA0, 12.01C02, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 usb 3-1: new full speed USB device using ohci_hcd and address 2 ata2: SATA link down (SStatus 0 SControl 300) usb 3-1: configuration #1 chosen from 1 choice ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: WDC WD5000AAJS-2 Rev: 12.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda Vendor: Optiarc Model: DVD RW AD-7170S Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 05 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usbcore: registered new driver usb-storage usb-storage: waiting for device to settle before scanning USB Mass Storage support registered. Vendor: Generic Model: USB SD Reader Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 4:0:0:0: Attached scsi removable disk sdb Vendor: Generic Model: USB CF Reader Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 00 sd 4:0:0:1: Attached scsi removable disk sdc Vendor: Generic Model: USB SM Reader Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 00 sd 4:0:0:2: Attached scsi removable disk sdd Vendor: Generic Model: USB MS Reader Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 00 sd 4:0:0:3: Attached scsi removable disk sde usb-storage: device scan complete device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@xxxxxxxxxx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1198060879.953:2): selinux=0 auid=4294967295 EDAC MC: Ver: 2.0.1 Nov 30 2007 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 input: PC Speaker as /class/input/input4 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:1: Attached scsi generic sg3 type 0 sd 4:0:0:2: Attached scsi generic sg4 type 0 sd 4:0:0:3: Attached scsi generic sg5 type 0 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 8139too Fast Ethernet driver 0.9.27 GSI 21 sharing vector 0xE1 and IRQ 21 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 225 eth0: RealTek RTL8139 at 0xffffc2000002a000, 00:50:bf:d8:a0:a1, IRQ 225 eth0: Identified 8139 chip type 'RTL-8139C' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... cannot find the slot for index 0 (range 0-0), error: -16 hda-intel: Error creating card! HDA Intel: probe of 0000:01:05.2 failed with error -12 FDC 0 is a post-1991 82077 lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Bridge firewalling registered ip_tables: (C) 2000-2006 Netfilter Core Team eth0: no IPv6 routers present Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack virbr0: no IPv6 routers present ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: (irq_stat 0x40000001) ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back From: Keir Fraser <Keir.Fraser@xxxxxxxxxxxx> To: Darryl Bowler <darryl.bowler@xxxxxxxxx>; xen-devel@xxxxxxxxxxxxxxxxxxx Sent: Wednesday, December 19, 2007 10:14:50 AM Subject: Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core The logs you sent in this email are unfortunately not very useful for this bug. Please send us the output of ʽxm dmesgʼ (this will get us the logs of Xen itself booting) and also (if possible) the dmesg output of booting a native (non-Xen) kernel. -- Keir On 19/12/07 16:06, "Darryl Bowler" <darryl.bowler@xxxxxxxxx> wrote: No one could help me on the other dist lists. Can anyone shed light on this? Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |