[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] We still have to disable vtd for old chipset?


  • To: "Keir Fraser" <keir.fraser@xxxxxxxxxxxxx>
  • From: "Neo Jia" <neojia@xxxxxxxxx>
  • Date: Tue, 3 Jun 2008 00:17:38 -0700
  • Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Tue, 03 Jun 2008 00:18:06 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Ba5kfXCrsdGZ5SWEnPSfeS4jPkWUfblOu0r62AMILOYSxJqEC0fWXxiAQZEBwfb+c+UroQcmuFvsjOvsuA09xwLK354/oLryG10DF3fMZEo9GqXbFaL8GkfxsZL9QrbFFFAoTr1Dw83O+WijB1g/cvtMurynC43KFGwkvs1FdCQ=
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>

> sudo /sbin/lspci
Password:
00:00.0 Host bridge: Intel Corporation 5400 Chipset Memory Controller
Hub (rev 10)
00:01.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 1 (rev 10)
00:05.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 5 (rev 10)
00:09.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 9 (rev 10)
00:10.0 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 10)
00:10.1 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 10)
00:10.2 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 10)
00:10.3 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 10)
00:10.4 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 10)
00:11.0 Host bridge: Intel Corporation 5400 Chipset CE/SF Registers (rev 10)
00:15.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 10)

In the user mailing list, I saw somebody is using VT-D on this chipset?

Thanks,
Neo

On Tue, Jun 3, 2008 at 12:15 AM, Keir Fraser <keir.fraser@xxxxxxxxxxxxx> wrote:
> I believe the hardware interface was different in older chipsets, so there's
> really no chance we'll support them.
>
>  -- Keir
>
> On 3/6/08 02:00, "Neo Jia" <neojia@xxxxxxxxx> wrote:
>
>> I am seeing the following error message in xm dmesg.
>>
>> (XEN) [VT-D]utils.c:59: *** VT-d disabled - pre C0-step Seaburg found
>> (XEN) [VT-D]utils.c:62: ***  vendor = 8086 device = 4000 revision = 10
>>
>> This is on Dell T7400. And the change is
>> http://lists.xensource.com/archives/html/xen-changelog/2007-09/msg00284.html.
>>
>> So, I am wondering if there is any fix for this?
>>
>> Thanks,
>> Neo
>
>
>



-- 
I would remember that if researchers were not ambitious
probably today we haven't the technology we are using!

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.