[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] RE: [PATCH 4/4 v2] PCI: document the change



On Monday, September 01, 2008 11:42 PM, Alex Chiang wrote:
>To: Zhao, Yu
>Cc: Jesse Barnes; linux-pci@xxxxxxxxxxxxxxx; Randy Dunlap; Greg KH; Grant
>Grundler; Matthew Wilcox; linux-kernel@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
>virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
>Subject: Re: [PATCH 4/4 v2] PCI: document the change
>
>* Zhao, Yu <yu.zhao@xxxxxxxxx>:
>> +1. Overview
>> +
>> +1.1 What is SR-IOV
>> +
>> +Single Root I/O Virtualization (SR-IOV) is a PCI Express Extended
>> +capability which makes one physical device appear as multiple virtual
>> +devices. The physical device is referred to as Physical Function while
>> +the virtual devices are referred to as Virtual Functions. Allocation
>> +of Virtual Functions can be dynamically controlled by Physical Function
>> +via registers encapsulated in the capability. By default, this feature
>> +is not enabled and the Physical Function behaves as traditional PCIe
>> +device. Once it's turned on, each Virtual Function's PCI configuration
>> +space can be accessed by its own Bus, Device and Function Number (Routing
>> +ID). And each Virtual Function also has PCI Memory Space, which is used
>> +to map its register set. Virtual Function device driver operates on the
>> +register set so it can be functional and appear as a real existing PCI
>> +device.
>> +
>> +1.2 What is ARI
>> +
>> +Alternative Routing-ID Interpretation (ARI) allows a PCI Express Endpoint
>> +to use its device number field as part of function number. Traditionally,
>> +an Endpoint can only have 8 functions, and the device number of all
>> +Endpoints is zero. With ARI enabled, an Endpoint can have up to 256
>> +functions by using device number in conjunction with function number to
>> +indicate a function in the device. This is almost transparent to the Linux
>> +kernel because the Linux kernel still can use 8-bit bus number field plus
>> +8-bit devfn number field to locate a function. ARI is managed via the ARI
>> +Forwarding bit in the Device Capabilities 2 register of the PCI Express
>> +Capability on the Root Port or the Downstream Port and a new ARI Capability
>> +on the Endpoint.
>> +
>> +
>> +2. User Guide
>> +
>> +2.1 How can I manage SR-IOV
>> +
>> +If a device supports SR-IOV, then there should be some entires under
>                                                          entries
>> +/sys/bus/pci/slots/. The names of the entires are XXXX:BB:DD.F-iov-NNNN,
>                                         entries
>> +where the first part (XXXX:BB:DD.F) is the domain, bus, device and function
>> +number of the device, and the third part (NNNN) is the index of a Virtual
>> +Function. There are three files under the entry: power, param and address.
>
>So are you saying here that you will actually create sysfs files
>named:
>
>       /sys/bus/pci/slots/XXXX:BB:DD.F-iov-NNNN
>
>We just spent some effort cleaning out this directory and getting
>human-readable names in /sys/bus/pci/slots/. The entries created
>there _should_ match the labelling on the physical chassis,
>assuming firmware tells us the right name.
>
>How will these particular slot entries be created? Do the
>individual hotplug drivers create them?

The Virtual Function is almost same as PCI function that belongs to a PCI 
device. I used hotplug framework as user interface to control the allocation of 
PCI software instance ('struct pci_dev') for Virtual Function.

After another round of consideration, I plan to remove the usage of PCI hotplug 
interface and create SR-IOV sysfs entries under /sys/bus/pci/devices/.../iov/. 
So this won't bring any confusion and also keep /sys/bus/pci/slots/ clean.

>
>Sorry, I guess I haven't read the patch series, just skimmed the
>documentation. I can go do that before asking any further dumb
>questions, but this little bit of information was a bit
>surprising to me.
>
>> +    - Writing 1 to the "power" will enable the Virtual Function,
>> +    and 0 will disable the Virtual Function; Reading it will get
>> +    status of the Virtual Function.
>> +    - Reading the "address" will get the bus, device and function
>> +    number of the Virtual Function.
>> +    - The "param" is the device specific parameters which may be
>> +    used by the Physical or Virtual Functions drivers.
>> +
>> +2.2 How can I use Virtual Functions
>> +
>> +Virtual Functions is treated as hot-plugged PCI devices in the kernel,
>> +so they should be able to work in the same way as real PCI devices.
>> +NOTE: Virtual Function device driver must be loaded to make it work.
>
>Ok, I'll go read the rest of the patch series; looks like you
>wrote a new virtual function driver.
>
>Thanks.
>
>/ac


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.